Initial planning when configuring FICO in a manufacturing environment

Dear Expert,
Does anyone have any documentation regarding what was
the initial planning or special consideration needed before we start configuring FICO in a manufacturing environment.
Your input is very much appreciated. Thank you.

Hello,
no, you only do it once. Apply the steps one the first Node and import the Certificate only one time into your BW.
See also:
http://service.sap.com/sap/support/notes/1695870
Regards
-Seb.

Similar Messages

Images lost after ppr when configured through CDN - jdev 12c

Hi
I configured CDN in adf-config.xml , the images are loaded fine when the page loads initially but when we do the ppr on any region that has images, the images are lost and instead of getting it from the base resource uri configured , it looks with in the application. Any idea what is going wrong ?
Jdevleoper 12.1.3.0.0.
Thank you
Ranjith

<adf-uri-rewrite-config xmlns="http://xmlns.oracle.com/adf/rewrite/config">
    <resource-uris>
      <base-resource-uri uri="http://10.25.245.50:7101/StaticContent/"
                         secure-uri="https://10.25.245.50:7101/StaticContent/">
        <match-pattern>^/.*/resources/images/.*\.png$</match-pattern>
        <match-pattern>^/.*/resources/images/.*\.png\?ln=images$</match-pattern>
      </base-resource-uri>
    </resource-uris>
</adf-uri-rewrite-config>

Planning Areas - No initialized Planning Version(s) exists

Hi,
Recently our SCM system was upgraded from SCM 4.0 system to SCM 5.0. After the upgrade I find in /sapapo/msdp_admin the planning areas in status red with message "No initialized Planning Version(s) exists". If I check the planning area it says "No errors found when checking the planning area".
Please help. How to initialize a planning version. I am new to SCM.
with regards,
Mohan.

Hi,
Thanks Mikhail.
When I try to Create Time Series Objects for a Planning Area from /sapapo/msdp_admin
I get the error "Master planning object structure 9ADPBAS is inactive".
Then I tried to activate the planning object structure 9ADPBAS from /sapapo/msdp_admin but I get "Error occured during activation". I do not find any log also. The long text shows as below.
=============================
Error occured during activation (see log)
Message no. /SAPAPO/TSM154
Diagnosis
An error ocurred during activation.
The planning object structure has not been activated.
Procedure
For detailed information, see the corresponding log; a log is only created if logging has been switched on. You switch on the application log from the main screen for editing planning object structures under Extras -> Log on/off.
=============================
ow to activate these structures and also how to activate the log for it ?
Please help,
with regards,
Mohan

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

Hi! ... When configuring my new iPad, it says the UserId is already in use and I cannot progress any more. Of course it's in use, it's my UserId. How do I continue ?? ... Thanks in advance

Hi! ... When configuring my new iPad, it says the UserId is already in use and I cannot progress any more. Of course it's in use, it's my UserId. How do I continue ?? ... Thanks in advance

Did you select "Sign In with an Apple ID" as opposed to "Create a free Apple ID" when setting it up?

How do I stop OSX from switching to First-Plan when Javascript popup on Minimized Window appear?

I'm running OSX Mavericks 10.9.5, Firefox 39.7.0.2
What happens is that i'm using an automated script with Selenium for automatic-forms-filling.
Everything is working fine, just like it does on LinuxMint, but the problem is that when i bring another window to first plan (of any program at all) the "minimized" window running the automatic forms gets "maximized" i.e. brought to first plan when a javascript popup appears, thus not enabling me to run that window on background.
Is there a way to run Firefox on OSX in such a way that Windows don't get switched to first plan when PopUps appear? It doesn't seem to have this behavior on LinuxMint.

Hello!
Maybe this links can help you:
https://support.mozilla.org/pt-BR/kb/solucoes-de-problemas-com-plugins-como-flash-java
https://support.mozilla.org/pt-BR/kb/como-desativar-applets-java
This link scan your plug-in's and search for updates:
https://www.mozilla.org/pt-BR/plugincheck/

How to programmatically set initial password when a user is created in OID

We are using the odihragent synchronization process to automatically create users in OID when an employee record is created. We would like to set the initial password for the newly created user to their last name + the last 4 digits of their SSN.
The odihragent process is successfully creating the user in OID and populates the last name and the last 4 digits of the SSN in OID. According to an open SR I have with Oracle, we cannot use the odihragent process to set the initial password because any time the employee record is updated, the synchronization process will reset the password to last name + SSN. They have recommended that we use a pl/sql plug-in to set the password using the WHEN_ADD plug-in procedure.
I am new to using OID and plug-ins and the examples provided in the Developer's Guide are limited.
I would like to know if anyone else is using plug-ins or another process to set initial passwords when a user is created? If you are using plug-ins would you be willing to share a code sample?

I am surprised that I have not received any responses... Surely there are others who are experienced with programmatically setting passwords when new users are programmatically created. Does anyone have any pointers on how to best accomplish this?

How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!

How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!

Create an iTunes credit by redeeming a gift card and it will be charged to your credit. From http://support.apple.com/kb/ht4874:
"payment methods accepted include iTunes store credit, credit cards, and debit cards"

Is there a way to tell when an iphone 3g was manufactured?

I'm on my third iphone. The first two had various hardware problems. The newest one is working fairly well...except that it says 'no service' at times when I switch over to 3G. Like the other two phones...they all work great for the first few days and then start to experience problems...especially during a call lasting more than 5 minutes.
But here's the problem: the last iphone I received as a replacement looks, well...used. The one I'm sending back is in better overall shape.
I was wondering if there was a way to check to see when this latest iphone was manufactured? I would like to know if I'm getting a recycled phone...or at the very least if it was built before or after the one I'm returning.
Thanks in advance for your help.

the 4-5th digits of the serial number indicate week of production
ie 82327 = week 27 of the year.

I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

Thanks,
I have tried with a new site it's working perfectly.
See the screenshot of the error.
Thanks for your support Rohit

Getting SPWeb.CurrentUser as null with Windows Authentication (AD), when configured for Claims Authentication

Hi All,
We recently migrated to SP 2013 from SP 2010. We are using most of the OOB features, with a few custom code. We have implemented a custom ASP.NET Membership Provider that authenticates against a web service. This was working fine on SP 2010.
The entire code base was migrated to SP 2013 (with .net fw 4.5, etc) and any issues Compile / Runtime were fixed. However, we are stuck at one bug, which seems to be occuring only while trying to login with Windows Authentication. When a user tries to login
with Forms Authentication, the error is never noticed.
Scenrio: Login as Windows Authentiction.
Result: The user is signed into the system and is authenticated against the AD. For random page loads - it throws access denied (even though he is a site collection admin). While attaching a debugger, we found that, at times the SPWeb.CurrentUser is null (weird).
At the same time, the HttpContext.Current.Request.IsAuthenticated returns true. Which means the User is Authenticated, but not available in the SPWeb.CurrentUser object.
Attached are couple of ULS Logs that we found. The line which says IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 is a little disturbing. Can you please let me know what is happening here? I am not able to access the root site (http://win2012d2:1234/)
however, i am able to access (http://win2012d2:1234/SitePages/Home.aspx) just fine, without any issues.
Please note, this error is only when the user is logged into sharepoint as a windows user. The forms user faces no such issues.
ULS Logs:
Name=Request (GET:http://win2012d2:1234/)
Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0
Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Getting Error Message for Exception System.ArgumentException: Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
Unknown SPRequest error occurred. More information: 0x80070005
SPRequest.GetPageListId: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPContext.get_ListId()
at Microsoft.SharePoint.SPContext.get_List()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
SPRequest.OpenWeb: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPWeb.InitWeb()
at Microsoft.SharePoint.SPWeb.get_WebTemplateConfiguration()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Mohamed,
According to your description, my understanding is that the error occurred when users login with Windows Authentication.
From the error message, I recommend to check if the anonymous access is enabled for the web application.
And please also make sure that the users all are available and have permission to access the site.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/28623bdc-a2f0-4876-9be4-9a764f106366/getting-spwebcurrentuser-as-null-with-windows-authentication-ad-when-configured-for-claims?forum=sharepointdevelopment
Best regards.
Thanks
Victoria Xia
TechNet Community Support

If I purchase an iPad mini with the 250MB of wifi/mo, am I able to switch off the internet from the plan when I am at home and use my own wifi?

I know 250MB of wifi is, well, practially none. So I was wondering if I was at my own home, as I already have wifi, could I simply use the wifi I alreadyhave, and use the wifi from the plan when I'm away from home and not using my already purchased wifi?

Yes.

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
Thanks

Apple menu -> System Preferences -> Displays.
System Preferences can also be found in the Hard drive -> Applications folder.
Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
http://support.apple.com/kb/ht1379

Lightroom opens fine initially, but when trying to open a different catalog it will go through the process but never reopen again. I can't get it to open at all until the computer is reset.

Lightroom opens fine initially, but when trying to open a different catalog it will go through the process but never reopen again. I can't get it to open at all until the computer is reset. I have been using Lightroom 4 for 18 months now and this problem just started happening in the last month.

No error messages. It acts totally normal but just never reopens when I try to reopen a new catalog. I create a catalog for each of my clients....I have done this since I started using lightroom as it seems tidy to me. But, I have never had this problem until now. I am using a pc and vista and Lightroom 4. Thanks.

Get rid of the initial asterisk when using PasswordField masking in console

Hi!
How can I get rid of the initial astrerisk when using the PasswordField script from Sun?
I've tried to check whether the BufferedReader is empty or not, but with no succes.
Here comes the code:
PasswordField.java
import java.io.*;
public class PasswordField {
    *@param prompt The prompt to display to the user
    *@return The password as entered by the user
   public static String readPassword (String prompt) {
      EraserThread et = new EraserThread(prompt);
      Thread mask = new Thread(et);
      mask.start();
      BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
      String password = "";
      try {
         password = in.readLine();
      } catch (IOException ioe) {
        ioe.printStackTrace();
      // stop masking
      et.stopMasking();
      // return the password entered by the user
      return password;
}EraserThread
import java.io.*;
class EraserThread implements Runnable {
   private boolean stop;
    *@param The prompt displayed to the user
   public EraserThread(String prompt) {
       System.out.print(prompt);
    * Begin masking...display asterisks (*)
   public void run () {
      stop = true;
      while (stop) {
         System.out.print("\010*");
      try {
         Thread.currentThread().sleep(1);
         } catch(InterruptedException ie) {
            ie.printStackTrace();
    * Instruct the thread to stop masking
   public void stopMasking() {
      this.stop = false;
}

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

Initial planning when configuring FICO in a manufacturing environment

Similar Messages

Maybe you are looking for