Initial preview of Edge Package

I created an Edge Animate project and published an Edge Package. When I placed it in InDesign it gives me a preview, which was the last frame of my project. I kept working on the project and that frame is no longer in my project but whatever I do, whenever I publish a package again and places it in indesign it gives me the same preview. And when I try to create a Folio, even if I have "Auto Play" checked that old preview still flashes before the project starts (on Deskop and iPad in Adobe Content Viewer). Is there any way to change this initial view/preview? I do not feel like restarting my project and it's a very interuptive to have this old image flash before my project starts. If it was a blank screen or another stage in the project it would be fine.
Thanks in advance.

I solved the problem. You can set a "Poster Image" in the Publish settings. Emberassing that I didn't see this before.
It still "flashes" on "Auto Play" so I suggest you use a blank white or black image.

Similar Messages

  • I keep getting an internal server error when I try to load pages in live preview in edge code...

    I keep getting this message every time I try to laod a page using live preview in Edge Code with Google chrome...
    "The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log."
    I'm using google chrome Version 33.0.1750.152. I'm running mac osx 10.9.2. I've installed Apache.
    in the project settings I have this url... http://127.0.0.1/~spencer/butterville_website/
    I had this working flawlessly with an earlier version of a website I was working on. I haven't changed any settings, the only thing that has changed is that I'm working with a new sub folder in the root directory. Every time I try to load the page, I get that error message. I can't figure out what I'm doing wrong. Please help! Thanks.

    This query seems to be related to Edge Code. you can get help from this forum.
    Also EdgeCode doesn't have troubleshooting page but you can get help from Brackets trouble shooting page.

  • Exporting with colors used in initial preview

    Hi, I often notice that the fast initial preview has a desirable set of colors, however when it renders high-quality preview, the colors become desaturated. My question is -- how can I export the photograph using the set of colors used in initial preview, but not in the high-quality preview?
    Note, I'm working with RAW files, Nikon D300, using "Vivid" setting for saturation and "High" for Active D-lighting.

    You can't. What you see is the jpeg the camera created as a preview to your raw file. Lightroom only shows that for a short time after which it replaces it with its own interpretation of the RAW. Lightroom, like any non-Nikon raw converter cannot read the hints like vivid on how to render the raw data. If you want the image as rendered by the camera, open your RAW in Capture NX (should have come with your D300) and export as a jpeg or tiff from there. You can also extract the jpeg from the RAW file using tools such as exiftool, but that is a pain.
    >Note, I'm working with RAW files, Nikon D300, using "Vivid" setting for saturation and "High" for Active D-lighting.
    Just to be clear, if you shoot RAW and open your RAW files in a third-party converter, none of these settings get used.

  • Pourquoi une animation responsive (en% par rapport à la fenêtre) fonctionne dans le preview de Edge et ne marche plus une fois importée en .oam dans MUSE ?

    Pourquoi une animation responsive (en% par rapport à la fenêtre) fonctionne et s'adapte à la bonne taille dans le preview de Edge et ne marche plus une fois importée en .oam dans MUSE (taille fixe) ?
    Merci à la communauté

    Illustrator CC uses the Pantone Plus series, there is no CMYK definition for the spot colours in these series.
    The CMYK conversion is now based on the CMYK profile in your Color Settings.
    This is a good thing, since most of the Pantone colours cannot be accurately reproduced in CMYK, colour management provides a way to simulate the spot colours as close as possible for your combination of ink, paper and press.
    The CMYK values that were previously given by Pantone were just one way of simulating the spot colours and would give different results when another ink, paper, press combination was used.
    Sometimes the CMYK values from Pantone were completely off and you give a perfect example with the Pantone 1797 U colour.
    Printing that ink on uncoated stock would never give you such a bright saturated red as the Pantone provided CMYK values would suggest
    If you want to have a better preview of the colour, use the Overprint Preview option, that comes closer to the final printed result. The Overprint preview in CC and CS versions give s you an almost identical preview (almost because the Lab values differ slightly).
    There are ways to use the old libraries, but why should you if Pantone itself stopped giving CMYK numbers?

  • Initial View for PDF Package

    I've created a PDF Package. I'd want to make sure that the documents in the package display on the left-hand side of the document pane when someone opens the PDF Package. There doesn't seem to be any option for that under File > Properties > Initial View. How can I make sure that the links to the individual files that make up the Package are showing when someone opens the Package?

    Default documents in PDF Portfolios - see my old blog.
    Showing the bookmarks panel (by changing the Document Properties) should work for a standalone file, but it won't change what's shown on the previews in a Portfolio.

  • Edge animation works in browser preview from edge and muse but not in chrome when published

    I have an Edge animation that worked fine in Chrome, Safari and IE.
    The last time I published my Muse site (To BC) again (since update to CC2014) it no longer worked in Chrome!
    Preview in browser (Chrome) from edge works, preview in browser (Chrome) from Muse works, publish and it doesn't work in Chrome (but does in Safari and IE).
    Have been trawling for possibilities but I'm not that web techy! Any help would be appreciated

    I don't remember specifically what fixed it at all as I'd done all of the following:
    Removed Muse and Edge and prefs
    Updated Muse and Edge
    trashed cache in Chrome
    copied the contents of the Edge project / stage into a new project and saved as cc2014 version
    re-published the whole site from Muse
    After many attempts it started working again but I can't say that it was one thing in particular - sorry about that.

  • EP 6.0 SP 9 snack preview - Problens after  package import

    I just installed the EP 6.0 SP 9 snack preview. The installation was okay and the Portals used to work. Them I imported the MSS package and after that I can not launch the SAP Portal anymore.
    I already tried restart the server, the system but I have no luck.
    When I launch the SAP Manager Console, I can observe the system is not totality green. The JCONTROL.EXE on the process list is yellow and the status is Some Process Running. The Server0 (J2EE Server)  on the process table the status is Starting Application. When I open the developer trace from the jcontrol I can observe the following error:
    - [Thr 2672] Tue Mar 15 07:48:22 2005
    [Thr 2672] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
    Does anybody passed thought this situation before or have any idea how could I solve this problem?
    Thanks in advance for your help and time.

    Change the bootstrap.maxheap from 16 to 128 in the clusters/instance.properties file.
    Jai

  • Preview Works Fine - Packaged Application Fails

    Greetings -
    Working on a html/javascript AIR app that basically inspects a directory structure and writes out an xml file.  When I preview the application from within Dreamweaver using the Preview in Adobe AIR button, all works as expected.  It writes the file out without issue.  When I create an AIR package and install it, the app hangs.  It appears to just stop.  No error is thrown, I can't find anything in the log.
    I haven't done much with AIR, but anything I've been able to make work with the previewer has worked as exepected when the package was created and installed as a desktop app.
    Any ideas?
    jd

    Hey Michael -
    Thanks for your response.  I seem to have corrected the error which was tied to a Filestream object that I had opened but failed to close.  Once I cleaned up after myself as I should, it seems to be behaving as expected.
    The curious thing to me is that it worked fine when run from within Dreamweaver, but failed when run from the installed package, making it a bit difficult to debug.

  • Muse will not preview with edge animate

    Once I have published my Edge content I place it in Muse and then try to preview it using the preview button.  It will not work.  I preview my work using the Edge Animate previewer and it plays just fine.  I play the HTML file in Firefox and it works.  I have scanned the web for two days without any luck to a solution.  Thank you in advance for any help.

    responded to your another thread, Muse will not preview Edge Animate File

  • DPS Preview and Edge Animation

    Hello,
    I am currently working on a Digital publication with Indesign and the DPS tools. I created several animations for this with Adobe Edge. All of the animations display correctly except one.
    On my cover page, it loads up the animation and plays fine, except for one of the assets. It does not even display the graphic at all. When I preview the .html file producted by edge, it works correctly and displays everything, however when i preview the app on my ipad with the imported oem file it is missing again.
    Any idea to my problem?

    Edge Animate 1.01 is now available for download, providing a fix for the iOS6 bug when deploying multiple Animate compositions in DPS. If you're using EA in conjunction with DPS, please download the update. Instructions and release notes can be found here:
    http://helpx.adobe.com/edge-animate/release-note/release-notes-edge-an imate.html.

  • What is the difference between Edge Animate CC, Edge Code CC (Preview), and Edge Reflow CC (Preview)?

    Also, what does the (Preview) mean?  Does it mean that a newer version will become available soon?

    Hi All,
    Preview releases means that our team acknowledges the limited functionality of the application. Our goal is to provide community members an opportunity to try out the application and we encourage everyone to provide us with feedback.
    Edge Animate lets web designers create interactive HTML animations for web, digital publishing, rich media advertising and more, reaching both desktop and mobile with ease.
    Edge Animate FAQ
    Edge Reflow allows responsive designs faster and create high-fidelity prototypes through media query breakpoints, precise CSS layouts, grouping and more. Edge Reflow now connects directly to Photoshop CC, allowing you to go from static design to responsive comp in just one-click.
    Edge Reflow FAQ
    Edge Code is a lightweight code editor for web developers and designers working with HTML, CSS, and JavaScript. Edge Code is built to work with browsers, speeding up development time by displaying changes to the code directly on the screen.
    HTML, JavaScript, CSS editor | Download free Adobe Edge Code CC (Preview) trial
    Regards,
    Devendra

  • Select thumbnails with no initial preview

    Hello,
    upgraded to iPhoto11 vs9.2.1. Since then I have experienced issues with 3 'events' not generating thumbnails. It does not seem to depend on size either as the 3 events in question contain 545 (2), 1(0), and 10 (7) photos- bracket denotes how many thumbnails visible.
    Now, the interesting thing is that clicking on the blank photo will reveal a triangle with exclamation mark for 1sec. Thumbnail generation for visible pics occur instantaneously, this also having been the case with affected pics prior to the update. Rebuilding of the library has had no effect.
    Cheers
    osx 10.6.8

    Has this not happened to anyone else?

  • Announcing the Edge Code Preview Update

    We've released an updated preview of Edge Code that incorporates a number of new features as well as community contributions. It's available to download at https://creative.adobe.com/apps. Some of the highlights of this release include:
    - Enhanced Live Preview Support: Auto-reload in the browser when saving HTML content, local server support for Live Preview, and a Live Highlight mode that will highlight matching HTML elements in the browser when in a CSS document.
    - Overall UI: New status bar, resizeable JSLint panel, and saved window positions
    - HTML Code Hinting: Get code hinting on HTML tags and attributes
    - Files and Folder Enhancements: Added commands and features like rename, new folder, and show in tree. Reorder the working set with drag and drop.
    For a full list of changes check out the release notes.
    Thanks to everyone who contributed, submitted bugs, and gave feedback.
    =Ryan
    [email protected]

    Yikes, that's pretty strange.  Can you try this?
    Open a command prompt
    cd to the download folder
    Run this: msiexec /i "Adobe Edge Code Preview.msi" /L*V "install.log"
    That should create an install.log file in the same folder.  Please reply back here with the contents of that file.
    - Peter

  • Why is Adobe Edge Code labeled as a Preview?

    We are excited to share an early preview of Edge Code, but our work is far from complete. While this version is stable and mostly free of bugs, the product is still missing several features that might be required for day-to-day use. If you run into any problems, we're here to help you on the forums.

    heathrowe Cant find any information for edge animate in there, only full.

  • Edge Animate slow and stuttering preview in the program / smooth when exported.

    In Edge Animate when working at the state animations (even simple ones) are really slow and stuttering. When exporting the animation and viewing it in Chrome it runs super smooth. Whats the problem? I am on Windows 8.1 x64 ...

    its more like stuttering .... i have no freezes or so but it appears like ... for example in games, when you have "vertical sync" turned off and the image is jaggered. The preview inside Edge Animate behaves like this, when i render it and view in Chrome ... everything is smooth and nice.

Maybe you are looking for

  • ICal calendars on my Mac don't sync with iCloud

    Am I missing something? When I configured iCloud, I noticed that I suddenly had duplicates of my Address Book and Calenders. My Mac can sync with my phone, my phone can sync with iCloud, but I can't sync my Mac with iCloud. Maybe I'm too lazy and hav

  • When will I get 20Mbps ?

    My exchange in Glasgow (Western) got 21CN WBC on 30/04/2008. I understand that this enables ADSL2 technology and the higher broadband speed of up to 20 Mbps. I do not therefore understand why I am told my contractual connection speed is limited to up

  • Cannot create Trusted System in NW 7.1 CE

    Hey to all, I've installed NetWeaver Composition Environment 7.1 SP 4. Now I want to set up single sign-on between my Java Stack and an ABAP system. When I try to create a trusted System in NWA after choosing the system (which is provided from SLD on

  • Newbie: python hetting started with BAPI_PO_CREATE

    Hi, After studying the documentation and looking for some source code as an example, I am at a total loss and looking for some help. I do not understand how the PO_HEADER (LIKE  BAPIEKKOC STRUCTURE  BAPIEKKOC) parameter should be filled with data and

  • How to remove the border of an Adobe Form Image Field

    Hello everyone I am using Desinger 8.0. Form properties: Preview type = Print Form (One-side): I am using an "image field" to include a image from the transaction SE78. There is always a box arround the image. How can I remove that box? I am using th