Initial Setup for Canon HFS100

I am setting up Final Cut Pro 7 with my Canon Vixia HFS100 (AVCHD).
Recording Settings:
24 Mbps
Frame Rate: PF30
I also have some footage in 24Mbps and 60i.
I have examined the drop down selection of all the formats, but I am still unclear which to choose for each of these different footage types.

[Click here to find out more about Working with AVCHD|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkf lows/#chapter=6%26section=0]
The same information is also available in FCP's Help menu bar item under the heading: *Professional Formats and Workflows*.

Similar Messages

Error in CTC for BI Initial Setup for ABAP

Hi,
I have freshly installed BIJAVA 7.0 system and now i wanted to connect
with BW ABAP7.0 system which has been system copied from Qualtiy system.
While running the CTC template for BI Initial Setup for ABAP i am
getting following error :
" Validate Client : BW is already configured for different client. CTC
can be run only for that client. If BW has to be configured for the
client entered in 'Client' input field, perform Client copy using
transaction SCCL before running CTC template. "
I have used Java UME option during installation.Will it create any
problem.
Regard's
Goldy

Hi,
Hope you would have done all the post precessing after system copy.
Please check what are the entry maintained in the table mentioned below.
RSPOR_T_PORTAL
Change the entry in the above table in SM30 in backend and also check the settings in the portal
System Administration -> System Landscape-> SAP_BW
Thanks
Rishi Abrol

FCE HD Easy Setup for Canon Vixia HFS21?

Dear ones, I have FCE HD v 3.5.1 installed on Powerbook G4 Mac OSX 10.4.11
Is FCE HD v 3.5.1 compatible with Canon HD Vixia HFS21?
If so, what is the appropriate Easy Setup for Canon HD Vixia HFS21? Thxs kindly!
Do I need an Intel based laptop to use this Canon Vixia HD HFS21? I believe my Powerbook G4 is not Intel based! Or is it?
Thanks kindly!
Nestor

Bad news:
I'm pretty sure this Canon shoots AVCHD video for which you need both FCE4 and an Intel Mac to edit. (Your G4 was the next-to-last of the Motorola processors before Apple switched to Intel chips.)

Initial setup for After Effects

Hi. Running AE CS4 on a Mac Pro w/ 16 GB RAM. Have some questions regarding an initial setup for AE using two internal drives (boot drive is an SSD).
With the aim of keeping my boot drive lean as possible and improving AE performance, in Preferences, under Conformed Media Cache, is it a good idea to select a folder on a different drive than the boot drive for both Database and Cache?
Should I enable Disk Cache and should I choose a folder on the 2nd drive for it? I read that enabling Disk Cache is not a good idea if you only have one internal drive bus. I've got a mid-2010 Mac Pro and I'm not sure if it has more than a single internal drive bus (although there's a reference to busses in the specs).
Re: Enabling "Render Multiple Frames Simultaneously" Without this enabled I was only able to get a RAM Preview duration of about 4" on a particular clip, but with it checked off, I was able to preview the entire clip (20"). So this definitely seems to be a good thing to have enabled. Anything I should be careful about?
Last thing. Does it matter if I keep my AE project files in a folder on the 2nd drive?

Dr. Seward wrote:
Re: Enabling "Render Multiple Frames Simultaneously" Without this enabled I was only able to get a RAM Preview duration of about 4" on a particular clip, but with it checked off, I was able to preview the entire clip (20"). So this definitely seems to be a good thing to have enabled. Anything I should be careful about?
You're running CS4. CS4 is old. It was written in 32-bit. This means it can only address under 4 GB of RAM. (CS5 and later are all 64-bit, so they can all access much more RAM.) When you enable multiprocessing in CS4, it actually launches several instances of AE so that it can address more RAM. Thus, your RAM preview will be longer because you are accessing more RAM. Does that help?

Initial setup for standby database - doubts ??

Hi,
While creating a physical standby database from a primary database what is the initial setup in case of the standby database which will be created.
1.Is it that I will only install the oracle with no starter database and then continue with the steps for creating standby database.
2. The SID has to be the same for both the database or can it be different.
Waiting for your answer.
sl

1)
Fulfill the prerequisites
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm#i58150
2) It has to be same.

Initial setup for teacher laptops?

I am sort of the default tech person for my school district eventhough I have no formal training in computers. We are replacing our 6 year old laptops soon and I wanted to know what the best way to set them up would be. With our current computers I am constantly struggling with them because every computer is so different and I cannot make changes without the staff member right there to enter their password for me.
What I would like to do is to either be the root user or an admin and then have the teachers be admins as well. I also would like to use ARD but half of the laptops will be in a building 20 miles down the road so I am not sure exactly how to set those up so I can troubleshoot issues from my building. A lot of the issues are insanely simple to fix if I have access and it ***** to have to drive 20 miles to change a setting or restart a program.
Also is it possible to set one of the computers up and then put that image on all of them?

Create yourself a LogMeIn Free account and add these system to that account for remote access. The client loaded on them will run on startup and tunnel out of the networks to the LogMeIn servers to establish an SSL availability connection. When you log into your account from any browser on another system you use for admin purposes, you'll see which machines are available to access. When you connected to them remotely, the connection is completely secure. Read up on it if you're not sure it's for you. Go to www.logmein.com. They even make a client for iOS devices if you're ever in a pinch and need to fix one of these system remotely from your iPhone or iPad. Slick stuff... and it's trusted.

Help with initial setup for AirPort Express

Now, before we decided to go wireless, our internet was configured like this: cable cord to router, ethernet cable connecting the router to CPU. This worked fine and our internet has never really had any sort of problems. However, we have had problems with our new AirPort Express. I've tried taking the ethernet cable that's connecting our router to our CPU, and using it to connect the router to the AirPort Express.
However, I keep getting the flashing amber light. When I go into the diagnostics, it says that it cannot pick up an internet connection, even though I'm able to get internet when I plug in directly. If I try to ignore this and set up the account anyway, I can get my computer to connect to the AirPort Express, but I can't get the AirPort Express to connect to the internet.
Please help!

pen22, Welcome to the discussion area!
Did you configure the AirPort Express (AX) to use the same settings as your CPU to connect to the internet?

Logistic initial setup with delta going on

Hi,
I am needing to check an old document extraction, since i found it in BW productive system with an error.
The PSA was deleted so i can't see the records that came from R/3.
So, i was thinking to run initial setup for my purchasing datasources, only taking that document. My question is, if the loading process (delta) still going on (i don't want to reload BW), can i make a test to run setup and then delete the tables? Can it be any problem with that?
Thanks in advance.
Regards,
Diego Lombardini

do a full loadd with repair request option.
in the infopackage > scheduler menu > repair full request > enable request as repair full request.
in the selection give ur document number
Regards,
BWer
Assign points if helpful.

HT5622 I did not choose "use icloud" option for my initial setup. so, it is creating for not enough space in my ipad. How do I go back and set up icloud to store data?

I did not choose "use icloud" option for storing during my initial setup. How can I reset icloud account, so it can be used for storing.

Welcome to Apple Support Communities
If you are planning on using iCloud to store files, forget about iCloud and use a cloud storage service like SkyDrive or Dropbox. iCloud is focused on information sync between the iPhone, iPad, iPod touch, Mac and PC instead of storing files like MobileMe. It's not worth using iCloud for this.
If you still want to set up iCloud, open Settings > iCloud, log in with your Apple ID and follow its steps

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Initial setup of iMac's for business

I recently purchased several iMacs for our business to replace our old Dell desktops.
Since these are going to be work computer and not personal, what would be the best practice during initial setup and registration? Should I register them all up under my name? or is there a option to register under company profile? Along with that, how would each iMac be identified/named on the network?

Bagumyan wrote:
Since these are going to be work computer and not personal, what would be the best practice during initial setup and registration? Should I register them all up under my name? or is there a option to register under company profile? Along with that, how would each iMac be identified/named on the network?
I think there is even an option to skip registration altogether by pressing Command-Q.
As far as the network identification: On each Mac go to System Preferences and open Sharing. You will see an option for Computer Name. This is the name that will be visible on the network. It would be a good idea to make a spreadsheet in advance where you work out the naming convention for all workstations on your network, then enter the names you decide on into each Mac's Computer Name.
I agree it is a good idea to also set each Mac's hard drive name in a manner consistent with both the other workstations and each Mac's Computer Name, so that each machine and its drives are easy to identify when being browsed over the network in a list with the rest of the machines.
The Computer Name is the "entry point" for each Mac when someone browses your business's network. Logging in to a Computer Name then reveals the volumes shared by that Mac, including the boot drive and any additional hard drives inside the machine or attached externally, which is why consistent naming is important.
Getting the Computer Name right is also important because many other Mac sharing services are tied to it. If you set the Computer Name of a Mac to "receptionist", then people browsing the network will see services (if enabled) like
receptionist (in the Finder sidebar as a Mac with File Sharing/Screen Sharing on)
*receptionist's iTunes Library*
*receptionist's iPhoto Library*
*HP Printer@receptionist*
*Epson Fax@receptionist*
and so on.

Have base station and added extender for downstairrs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. What's wrong? Thanks!!

Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!

Power off both the AirPort Extreme and AirPort Express
Wait a minute
Power up the AirPort Extreme and let it run for a few minutes
Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate.

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

HT1430 Initial setup of new iPad I opted for passcode. Now I don't want to use it. How do i eliminate the passcode?

Initial setup of new iPad I opted for lock passcode. Now I wish to opt out. How do I do this?

Thank you so much. You may be able to tell that I am a 70 year old new to Apple products. i tried that but when I had to re-enter passcode, I figured that wasn't the way....duh!!!!!

Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation

Hi,
We have customized Quote Approval Workflow (ASOAPPRV) XXXASOAPPRV, would like to understand how to setup that custom workflow XXXASOAPPRV will be triggered for Quote Approval process, when we submit the Quote for approval from Quotes screen.
Appreciate your help on this.
Regards,
Ram

Pl see your duplicate post here - Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Srini

Initial Setup for Canon HFS100

Similar Messages

Maybe you are looking for