Initial setup of functional unit Development Infrastructure (DI all-in-one)

SDN Team,
When we login in into NWA
In deploy and change tab we find 9 wizards.
But i could not see below wizard for NWDI configuration
Initial setup of functional unit Development Infrastructure (DI all-in-one).
Please let me know their are any prerquisities to be done??
Thanks
Srikanth

ideally you should not use NWDI as an Add in, it is not a recommended scenario.
For problem shooting this I would look in the Server0 directory for the RFC trace file which should show you what the issue is.
If not I would then log onto the ABAP system with NWDI down, go to SM50 and increate the trace level of all DIA Wp's but only have the Security component ticked... then I would start up the J2EE and after it has failed to connect I would look through the trace files (after turning off tracing) looking for the word sapjsf. That should tell you exactly why it is failing.
hopefully the sysnr below of $$ was just a typo.
Ensure it is client 001 that you have changed the sapjsf password in (a common error)

Similar Messages

Error during Initial setup of functional unit Development Infrastructure

Dear All,
During the template installation of DI all-in-one (Initial setup of functional unit Development Infrastructure (DI all-in-one)) I get an error at Step 64/96 Upload Default ACL Settings.
Error: not a valid URL: unexpected character found [':' at position 7]
Step: Upload Default ACL Settings
Does anyone know how to fix this issue?
Kind regards,
Joost Christenhusz

Hi Lee,
I think I know how to solve this. I have just solved a similar problem with my PI 7.1 EHP1. Deployment in JSPM of various software components all failed like this example:
JSPM log:
Deploy status is 'Aborted'
Client path '
pi71\sapmnt\trans\EPS\in\SAPXIAF04_7-20002649.SCA'
Description:'1. ERROR CODE DPL.DS.5089 Exception during generating components of sap.com/com.sap.aii.af.app application in webservices_container container.
-> com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I'.
Default Trace:
Caused by: java.lang.NoSuchMethodError: com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I
at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.getBindingDataId
After that most of the browser based admin apps, such as NetWeaver Administrator ( /nwa ), would refuse to start.
But finally after several tests, searching on SDN+SMP and restore to backup version I found the solution in [SAP Note 1328776|http://service.sap.com/sap/support/notes/1328776] which describes a similar problem: Update to the newest version of ENGINEAPI 7.11. Today this is ENGINEAPI04P_4-20002603.SCA.
You may also want to make sure that you are running the newest version of the Configuration Wizard, so you should check/update LMTOOLS, LMCTC and LMCFG*, currently LMTOOLS04P_3-20002705.SCA, LMCTC04P_1-20002694.SCA and LMCFG04P_4-20002729.SCA.
I hope this proves to be useful.
regards
Mauri

Can't find Initial setup of Functional unit SLD

Dear all,
when i start Initial setup of Functional unit SLD,the sudden interruption,then i can't find it under the All Configuration Tasks ,i only can find it under the History of Executed Configuration Tasks .
How can i do it?
Thank you

There is no SLD installed by default in CE.
For this you need install one dedicatd j2ee server that will talk to remote system. After that we can use that in our development
check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1
Raghu
Edited by: Raghavendranath Garlapati on May 19, 2009 12:49 PM

Problem in Initial setup of functional unit ADS

Hi All,
I started the initial setup of functional unit ADS in configuration wizard in NWCE system. The second screen was asking for options like typical or custom. I had left this screen for a while and when i came back and choosed custom, it throwed error saying 'session expired. '
so i closed the configuration wizard and start the Initial setup of functional unit ADS again, but this time it is in status 'currently executing' and the button 'start', 'resume' and 'reexecute' is all grayed out.
How to resume this configuration now ?
Any solutions are most welcome.
thanks
Moses

My basis has not found a better solution so far. For now he just "bounces" the server. (shutdown and restart, just the CE instance). Please, let me know if you find a better solution. Cheers.

"Initial Setup of Functional Unit DI all-in-one" not visible in NWA

Hello,
I am trying to configure the functional unit DI using the NWA configuration wizard. I am unable to see the configuration task "Initial Setup of Functional Unit DI all-in-one" in the NWA --> Deploy and Change.
I checked the note 1142136 on how to activate the usage type manually and performed the steps mentioned. However, still I do not see this configuration task.
Could anybody please help me how to perform the initial configuration tasks on the DI?
Thanks.

Hi Divya,
Looks like you already found the /sld/fun alias. The 'Configuration Task' checkbox in the table for the entry 'System Landscape Directory' should be checked. If so, and the config wizard hasn't been run the 'Enable Automatically' button should be available (not grayed out). Click on the 'Enable Automatically' button and the config wizard should start.
HTH.
O.

Problems with initial setup of Java WebDynpro development environment

Hi Experts
I am very new to Java WebDynpro environment. I am trying to setup the J2EE engine and SAP Netweaver Developer Studio on my local machine. I have installed MaxDB, SAP NetWeaver Developer Studio and NW2004s on my local machine. After this I have started my server node from SAPMMC. I have following doubts to be clarified:
1. How do I know the Message Server Port number of the SAPJ2EE engine which needs to be specified in the SAP J2EE engine settings in Developer Studio.
2. How do I make sure that my server process are properly started and running properly?
Best Regards
Anand.

Hi Arun
In my SAPMMC, I am seeing two instances under my server node running in green status. I assume that one is J2EE instance and other in SCS Instance. J2EE instance number is 30 and SCS instance number is 31. I tried to access the links:
http://localhost:53000/index.html and
http://localhost:53100/index.html
I was unable to access both these links. However when I tried to access only
http://localhost/index.html , I got the SAP Web Application Server Homepage. Here on clicking the System Info link, it asks for user/password. The default user/password can be used as Administrator/abc123.
Here I got all the info about my server ports.
For me http port was set as 80 and thatswhy 53000 and 53100 were not working for me.
Thanks a lot for your help.
Cheers & Best regards
Anand.

My new iPad2 synched OK on initial setup but I didn't really want all the photos in iPhoto transferred so on later synch I tried limiting the sych to certain albums only to find that only a fraction of the albums now on the iPad. I tried synching again.

My new iPad2 set up OK with all the photos in my iPhoto transferring . On a later synch I tried limiting the transfer to only certain albums. After that I find only a fraction of the desired albums transferred. I tried synching again without any restrictions but get the same limited number of photos and albums. I think I've seen the solution to this fault somewhere - something to do with deleting the iPhoto cache but can't find it.

Update: I was unsuccessful on my attempt to delete the iPhoto Cache folder because I didn't follow the directions exactly. There seems to be more than one folder with an identical name. Finally succeeded in getting all my photos back on the iPad2.
If one desires to change the selection of photos snc'd, however, it apears that you must change the selecion from the iTunes screen while the iPad is plugged in and the select "Apply". Unfortunate, the sync starts immediately when you plug the iPad in and it doesn't seem to smart to stop the sync. It appears you have to make a change in iTunes while syncing. Let it complete. Detach the iPad. Go back and delete the iPhoto cache ad directed. Then the next time you sync presumably the new sync restrictions will apply. I didn't want to risk stopping the sync that started automatically to change the sync options and then direct it to sync again but that might work. Too bad we don't have more control over the starting of syn when the iPad is attached. Maybe we actually do but I haven't noticed it.

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

T500 Vista buying experience and initial setup problems

This a long post but I felt the information could be used by others buying a notebook and trying to set it up.
I have used a Thinkpad T40 (1 GB, XP Pro) at work since 2003 and just love the rock-solid keyboard, screen, and hinges. The IT department has offered me the most recent Dell computer as an upgrade but I much prefer to keep my old reliable T40.
When my daughter needed a notebook for university in September, it was only natural to consider Lenovo, having heard about too many quality problems with other manufacturers. I wanted this notebook to last through the 4 years without any hardware problems.
I did a lot of research on the Web and read numerous Thinkpad forums. The information gathered was invaluable for deciding which configuration to buy. Note that I have never used VISTA before, nor have I ever opened a notebook to replace parts.
Buying experience:
- On my first contact with the Lenovo Sales desk in Canada, they mentioned there was a special 25% coupon sale, if my configuration was over $1500 (discounted price). These specials come back often, so it is best to check the Lenovo site. At the time, there was a free integrated camera, free upgrade to 250 MB HDD and free shipping. Since these promotions can be removed at any time, I decided to place an online order for a Thinkpad T500, before having completed all my research. It is easy to place an order online. You just have to remember that not all items contribute to making up the $1500, such as MS Office software.
- Lenovo Sales telephone support for answering any questions about online ordering was outstanding and very helpful.
- Note that if a particular online configuration is there one week, it might not be there the next week. It depends on parts availability at Lenovo.
- In order to get the 25% coupon discount, I had to add some items to my configuration to reach $1500, such as Bluetooth, Wifi 5100, which I did not really need, but the saving on the overall cost was worthwhile.
- I had ordered a WXGA (1280 x 800) High Brightness LED Backlit screen and 3 GB of RAM. After reading about the poor display quality of these screens, I was able to cancel my order by phone the next day (after making sure the same deal was still available), and place a new revised order for a WSXGA+ TFT (1680 x 1050) screen. Since the configuration price for an additional 2 GB RAM was $110 CDN, I decided to buy the extra 2 GB RAM (only $43 CDN) as an accessory, on the same order, separate from the T500 configuration. I could then install the RAM myself to save $67 ! Just make sure you pay the extra to get the base 2 GB RAM on one DIMM, since there are only 2 slots available. I know I will only be using 3.5 GB with my 32-bit Windows, but at least, if one of the DIMMs goes bad, I can still operate on 2 GB.
- as for choosing which CPU to buy, I chose in the middle range, starting with the first CPU having 3 MB L2 cache.
- I did not buy MS Office or McAfee Antivirus with the configuration. Since my daughter attends a post-secondary institution, she was able to order MS Office Ultimate 2007 for $64 CDN + $13 for the DVD. Microsoft has had this promotion on their site
(http://www.microsoft.com/student/discounts/theultimatesteal-ca/default.aspx)
for a while, but it is not well known. You get 8 MS products for one low price and it is completely legal for numerous countries ! I downloaded the software since it took 5 weeks to get the DVD delivered ! At the end of 4 weeks, I contacted Microsoft to tell them I had still not received the DVD. So I received the first DVD and a few weeks later, I received a second copy. So much for quick shipping !
Initial impressions:
- I received 3 separate shipments: 1 free Thinkpad privacy filter to install on the screen, the 2 GB RAM, and finally the T500 (which took about 2 weeks).
-The stainless steel hinges are rock-solid. When trying to raise the lid in the first weeks, you have to hold down the keyboard. Not at all like the hinges I see on the Dell notebooks at work.
- The 3 USB port connections are very tight, which means they should last through repeated plugging and unplugging.
- The T500 is surprisingly quiet, more than my T40. You can hardly hear the fan.
- I am extremely satisfied with the screen resolution, colours, and quality.
- The only disappointment was the keyboard ! Typing on the left-hand side (Q,W keys) produced an annoying "clunk". This was the worst keyboard I had ever used, being accustomed to the legendary quality of my T40. Even my daughter complained about the keyboard. I had read on the forums about the "flex" in the keyboard. Before ordering, when I asked the Sales Rep if these known problems had been solved, I was told that yes, the keyboard flex was no longer an issue. Too bad this was not true !
Initial Setup:
- Setup was easy. Just follow the on-screen instructions.
- I was not very happy to see a trial version of MS-Office and McAfee Antivirus on my notebook. I had not ordered it on the online configuration and did not want it. I had read on the forums that other users had all sorts of problems trying to get their own version of MS Office working (activation keys not being recognized), when the pre-loaded software was still there. And I knew how difficult it could be to erase all traces of McAfee by myself.
Hardware problems:
- after I burned my very first DVD, I pressed the Eject button. To my surprise, there was a thin grey foam ring (about 3 cm diameter) sitting on top of my DVD media. I assumed that this came from the roof of the DVD drive and the manufacturing process had missed the glue to keep it there. I contacted Lenovo and they immediately sent out a replacement (received the next day), which was easy to install. I then returned the defective part to Lenovo. My only complaint is that this was a refurbished unit. I was expecting a new unit since the part was defective out of the box and not a few months later.
- for the defective keyboard, I contacted Lenovo and mentioned the numerous complaints on the forums, and they sent me a new keyboard (FRU 42T3938). Unlike the DVD drive, I did not have to send back the original keyboard. However, the replacement keyboard was exactly the same as the original, with a thin flexible backing full of holes. I contacted Lenovo again in the morning and the agent mentioned I should contact Sales, since there was nothing more he could do. That afternoon, the agent called me to say that after further research, he had found a replacement keyboard that would correct the flex. When I received the second replacement keyboard (FRU 42T3210), I knew it was the right one, since there were far less holes in the more solid backing plate. I followed the instructions for replacing the keyboard and added my additional 2 GB RAM at the same time, since it is in the same area, under the palm rest. Now the keyboard is almost like my solid T40, and I am no longer ashamed of the T500 keyboard. For those of you wondering what an ACNOR or CSA keyboard is, it is one where the 5 most common French accented characters (and not only the é) are used with one keystroke. I have been using such a keyboard disposition since 1994 and it is invaluable when typing in French.
For pictures comparing the defective and replacement keyboards, see
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-keyboard-replacement/m-p/158451#M15525
My immediate goals:
- out of the box, there are 3 partitions: partitions Q (10 GB) and S (1 GB) are Lenovo partitions to recover the operating system, C partition is a single partition over 200 GB on my 250 GB DD. I wanted to partition the C: drive in multiple partitions.
- I also wanted to eliminate MS Office and McAfee so I could install my own software (MS Office 2007 Ultimate and free Avast Antivirus). When I contacted Lenovo to ask how I could do this, they said I could use the recovery partition and "customize" it so that this software would not be installed. Turns out that this option was removed by Lenovo. I guess pressure from Microsoft and McAfee was too great ! The only other option was to use Add/Remove.
Partitioning problems.
- I ran Diskmgmt.msc (also available on XP) to see the layout of my HDD. Unfortunately, it did not seem to be powerful enough to partition like I wanted. But it is great to see the layout of the disk and do basic partitioning. (http://www.theeldergeek.com/hard_drives.htm)
- I installed the free EASUS Partition Manager (http://www.partition-tool.com/); the non-free Pro version works on 64-bit. I wanted to partition: C 35GB (Operating System and Office), D 20GB (other applications), E 25GB (Data), F 100GB (Music and Pictures). I also installed the free EASUS Todo Backup (http://www.todo-backup.com/) to do regular image backups as I was proceeding.
- while trying to partition the C drive, I must have made an error somewhere (I think I accidentally declared another partition as the active partition). Whenever I rebooted, I would get the message "Boot MGR is missing". I could not even use the recovery partition (Q and S) on the HDD. So my notebook was totally unusable. Fortunately, I had burned 4 Recovery DVD's, as soon as the OS was operational. The first recovery DVD booted OK. However, the system would not recognize any of the 3 other recovery DVD, displaying a message such as wrong disk inserted or something similar. Imagine if in a few months I had needed to use these recovery DVD that I had burned; they were completely useless and I would have nothing to recover with. Very scary !
- I explained the problem to Lenovo Support and they sent me within 3 days a set of 4 Rescue & Recovery DVD. By following the instructions, it took 2 hours to recover to a working system. The good: no Office or McAfee trial software came with this recovery. The bad: there was a 2 GB empty partition at the beginning of the HDD and 10 GB of unallocated space at the end of the disk. Why Lenovo would do this, I don't know; seems a bit sloppy to me. Also, I had to manually reconfigure everything, since there is no "just follow the instructions" as when configuring the "out-of-the-box" system. I had to install my own PDF viewer
(free open source PDF X-viewer http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer), Adobe Flash, etc...
- the major problem in partitioning is the inability to shrink a partition (such as C) in order to free up space after to add extended partitions
(http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-...). There always seems to be VISTA unmovable files, MBR or something else. After reading numerous posts, I installed the trial version (30 days) of Raxco PerfectDisk Home edition in order to consolidate all the files to the front of the C: drive. A few iterations were required since the MBR seems to be placed in the middle of the partition. I was finally able to partition my HDD exactly as I wanted. I was so pleased with the efficiency and ease of use of PerfectDisk that I bought the Pro 10 version. Just wait for when the software is occasionally discounted. (http://www.perfectdisk.com/home)
VISTA User account setup:
I had created my E partition to store all user data of all accounts, since I would have multiple accounts on the computer. I also wanted to store all music and pictures in the Public folder on F partition. There are numerous methods described on the Internet, most of which seem too complicated. See http://joshmouch.wordpress.com/2007/04/07/change-user-profile-folder-location-in-vista/ and
http://www.vista4beginners.com/Move-user-files-folders-to-another-partition?page=1. I finally decided to do just 2 simple registry modifications described in the last post here
(http://superuser.com/questions/6391/moving-users-folder-on-windows-vista-seven-to-another-partition).
It worked for me but use at your own risk ! Just edit the 2 Registry keys and replace the C: drive by the one you need.
- I only had the Admin account created on the C: partition. Before creating any other user accounts, I modified the registry so that all new user accounts created would use my E partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList ProfilesDirectory = E:\Users
- I modified the registry so that the Public folder would be on my F partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Public = F:\Public
Other notes of interest:
- I had been a long-time subscriber to the Fred Langa Langalist
(http://www.langa.com/backups/backups.htm). I now subscribe to the excellent Windows Secrets newsletter (http://www.windowssecrets.com/). The information provided is very useful.
- I had considered an inexpensive boot manager, partition manager and imaging software (BootIt Next Generation) highly recommended by Fred Langa
(http://www.terabyteunlimited.com/index.htm). But it seemed a bit like overkill for my needs. There is a fully-functioning trial version.
- I regularly consult a complete list of recommended free software on Gizmo's Freeware review (http://www.techsupportalert.com). One recommended free open source defragmenter which I did not use was MyDefrag (http://www.mydefrag.com/).
- download and install the latest version of the Lenovo System Tools (Toolbox). It is very easy to use and can troubleshoot all hardware problems. Search for MIGR-67520 on the Lenovo site.
- you can find Roxio DVD burning software on the Lenovo site (MIGR-72359 on the Lenovo site). I have not installed it yet.
- use the Lenovo System Update to keep your drivers up-to-date.
- for info on how to use switchable graphics, search on the Lenovo site for MIGR-70495.
- for tips on setting battery parameters, http://forum.notebookreview.com/showthread.php?t=320082
Recommendations to Lenovo:
- don't ship poor quality keyboards. You have too much to lose, for the small manufacturing savings.
- don't pre-install trial versions of Office or McAfee. This should be an option and not be forced onto buyers.
- at least ship the HDD with a 40 GB C primary partition and the rest as D: partition. This would make it easier for users who are not technical.
- if you are going to include an integrated camera, provide software to use it. Currently, I have no way of taking a picture or making a video without acquiring other software. The technique described here
(http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67413) does not work !
- provide some software to reduce the speed of the DVD drive when watching movies. The noise at the default maximum speed is very annoying.
Thinkpad T500 | Model 2081-CTO | Intel Core 2 Duo P8700 (2.53GHz, 1066MHz 3MB L2 Cache) | 4 GB PC3-8500 DDR3 RAM | 15.4" WSXGA+ | ATI Mobility Radeon 3650 (256MB) | 250GB Hitachi HDD (5400rpm) | Bluetooth 2.1 | Integrated Camera | DVD Recordable UltraBay Slim | Intel Wifi Link 5100 | Sony 6-cell Li-Ion battery | Vista Home Premium 32-bit SP1

people complaining about problems installing an office over another office are (dare i say it) stupid. it makes absolutely no sense installing one over the trial version. just uninstall the trial and you'll be fine. every single time.
as for problem with uninstalling mcafee (or any other antivirus, for that matter, just download the uninstaller from the software company e.g. http://service.mcafee.com/FAQDocument.aspx?id=TS100507 for mcafee.
that said i believe you get to choose if you want mcafee and/or office when you go through the inital boot, the "on-screen instructions"
you can slow down the odd via power manager
and thanks for the tips on changing the reg to have the user profiles somewhere else!
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

SAP PI 7.3 - initial setup Configuration wizard

Hi Experts,
While running the initial setup Configuration wizard.,facing the following issue.
Thanks in advance
Exception Class: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException
Exception Message: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
Stack Trace
com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:144)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:156)
     at java.lang.Thread.run(Thread.java:679)
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:61)
     at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:36)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:133)
     ... 18 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.CPIServiceExecutionException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:107)
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:59)
     ... 20 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.AbapConfigurationProviderBaseException: Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.
     at com.sap.tc.lm.ctc.provider.abapconfiguration.connector.JCOServiceConnector.getFunction(JCOServiceConnector.java:97)
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:98)
     ... 21 more

Hello Vijay,
Please check user DDIC in client 000 - ensure that it exists, not locked and has the same password as in Integration Server client.
Regards,
Vadim

SEM BPS - initial setup

Hi All,
I am new to SEM BPS, could you please guide me in the initial setup process please?
Regards,
Vicki B.

Hi,
There is no initial setup process.
BPS is just a tool embedded in BW for creating planning applications which comes with some pre-defined planning areas.
You must have a business requirement and then, according to it, develope an application in BPS.
BR,

Catalyst 3750 24FS-S Initial Setup help please

First time with Cisco and with Fibre, so a double whammy!
I would appreciate some help from the community from someone with experience setting up a 3750 24FS Switch
I have WS-C3750-24FS-S fibre switch that I have inherited In good working order but factory reset) which I need to configure just as a very simple Layer 2 switch where the Gbit SLIC is the uplink (trunk) and the 24 ports connect to 24 different users (Soho Router). All users and the uplink Gateway are on the same subnet, so I don't think I need Layer 3 switching, but not avers to using it if necessary to get things working.
Firmware is v12.2(25)SEE2 and I have the switch Console connected to a PC serial port. I have gone through the initial setup process following the guide and I appear to have the initial setup done correctly but non of the ports are "UP" and I can't for the life of me see how to switch the ports on?
MySwitch>show interfaces fastethernet1/0/1
returns
FastEthernet1/0/1 is down, line protocol is down (notconnect)
I can change duplex from half to full and I can set flow control up on receive, so the switch is functional programmatically speaking. But what are the magic incantations to change the "down" state to the "up" state???
If I am posting in the wrong forum please tell me where I should post this request for help?
Thanks

Thank you Tom - on the money with that answer. There is no magic "up" command (other than no shut). The ports just come "up" when correctly connected. I had just about figured it out by connecting two of the 3750 Switches to each other and bingo the connected ports came up by themselves. I had previously connected the ports to an external Media Converter so I could get a wired Ethernet connection. I think the Media Converter is not doing it's job or is incompatible. All the right LEDs came on apart from FX Active!
Thanks for the help Tom, much appreciated.

Initial Setup Problem - Starting the SLD Registration process

Hi,
we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
We have restarted the system but after starting again the wizard it stands still again.
Same problem on our PI quality assurance system.
PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
Steps of installation:
1) Installation of PI 7.11
2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
3) Kernelupdate to 106
4) Updates SPS7 ABAP
5) Updates SPS7 JAVA
6) Run NWA Initial Setup with J2EE_ADMIN
Could someone help?
Thanks
Regards
Thomas Mühl

Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

Have base station and added extender for downstairrs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. What's wrong? Thanks!!

Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!

Power off both the AirPort Extreme and AirPort Express
Wait a minute
Power up the AirPort Extreme and let it run for a few minutes
Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate.

Initial Setup Loop on 5508

I have a new from the box 5508 which I am attempting to follow the initial setup process to IP it. When I make it through the initial setup the box reboots buts brings me back to the "terminate auto-install" prompt again for some weird reason?
Any ideas?
Others I have setup have been fine.

Some additional information is the unit is running version 7.3.101.0 and there appears to be an error as it scrolls through the boot which talks about not accepting the EULA (I wasn't prompted to accept anything in the initial startup questions)

Initial setup of functional unit Development Infrastructure (DI all-in-one)

Similar Messages

Maybe you are looking for