Initial transportation settings

hi,
we are conneting BW development server to BW quality server, i learn that some tecnicial setting has to be carried out in BW Dev server .to ensure that all transportation are guided to the specfic BW quality server. could u pls let  me know wht r technical setting and how to do them.
regards
siva

Hi,
You may also want to check out this site that gives useful tips and tricks with GarageBand:
http://www.synthtopia.com/Articles/GaragebandTips.html
One of the first sections covers the Tempo adjustment for GarageBand.
Please let me know if you found that information useful,
Vicente.

Similar Messages

  • Acrobat 7 Pro, Script to Automate "Initial View" Settings

    Can you create an Applescript that let's you batch define Acrobat's 'Initial View' settings under the Document Properties of an existing PDF?
    I am not familiar with scripting language and enable the UI feature of Script Editor, but it didn't seem to record my actions. Photoshop's Actions don't allow me to define these specific settings.
    Dual 1.8 G5   Mac OS X (10.4.7)  

    Thanks, Bernd. I forgot to mention in the original post that the "Restore last view settings when reopening documents" option IS disabled (unchecked), both in Acrobat and Reader. The behavior described occurs with this option disabled.

  • Action Wizard - modify "Initial View" settings

    I am trying to figure out if there is a way to change the "Initial View" settings in the document properties using the Action Wizard.
    For accessibility reasons I need the Document Properties > Initial View > Window Options > Show settings to "Document Title" as opposed to the default "File Name".
    Any suggestions? i cant find a way to change this using the "Create New Action" options
    Thanks.

    It's under Document Processing - Set Open Options - Display Document Title.

  • Prevent pdf initial view settings from disabling my menu bar

    Some pdf files are configured with initial view settings to remove my menu bar and other toolbars. This is incredibly intrusive, and difficult to get those back unless you know the correct keyboard shortcuts. Most users don't.
    So please tell me how to permanently disable pdf files from asserting their own initial view settings on my viewing environment. I do not want to permit them to take over my window and get rid of my menu bars. I find that behaviour incredibly annoying.
    Thanks

    Sorry, you can set the default view parameters only for documents that the author has not specified a view option for.
    You might be able to write a plug-in that could change the open document action.
    Have you tried contacting the authors about this issue?

  • Initial View settings not always working

    A user recently reported this problem:
    She opens a PDF for the first time through our website by click a link on an HTML page in IE. The PDF opens in a new browser window to the default view and first page, as specified in the initial view settings.
    She advances several pages into the file to a page with links.
    She clicks one of these links, which takes her to another page in the file.
    She closes the browser window.
    She returns to the original web page and clicks the link to the PDF again. The PDF opens to the LAST page viewed -- not the first page as specified in the initial view settings.
    I'm seeing the same behavior on my PC. The versions of Acrobat Pro and Reader I have are 8.1.3. I've tried turning on and off the web browser settings in Acrobat and Reader (Allow fast web view and Allow speculative downloading ...), but I'm getting the same results.
    Any ideas?
    Thanks,
    Rob Miles

    Thanks, Bernd. I forgot to mention in the original post that the "Restore last view settings when reopening documents" option IS disabled (unchecked), both in Acrobat and Reader. The behavior described occurs with this option disabled.

  • Acrobat 9 Ingores Document Initial View Settings

    I've created a PDF from InDesign. I set Initial View Settings for the document in Acrobat 9. When I open the document in A9, the Initial View Settings are ignored. I then open the same document in A8 and it opens fine. I'm guessing there is a global setting in the A9 preferences, but I can't seem to find one that works. Please help.

    I apply the Initial View settings as I first create the PDF.
    I use File... Properties... Initial View.
    Depending on the length of the document, I make the first setting Page Only, Pages Panel and Page (most often), or Bookmarks and Page (if it is a long report and I am making bookmarks).
    I make Page Layout be Single Page.
    And I check Hide Tool Bars in the last group. (All commands are still available with menus, with much less real estate taken up by tall toolbars.)
    Then I save and close the document. Then I re-open it to make sure it looks as I intended.
    On my old computer, that always worked great and made a professional looking PDF.
    But when I downloaded the same product onto my new computer, this no longer works.
    I am using a workaround and hoping that when I upgrade on the new computer that the later version will work.

  • QuickTime X Transport Settings

    I'm not finding any way to adjust the transport settings under QuickTime X.
    In QuickTime 7 and prior we sometimes had to have our users adjust their transport settings due to various issues.
    But I'm not seeing any way to adjust the transport settings under QuickTime X
    Does anyone know if it's possible?
    Thanks in advance.

    Hi Mitchell
    Thanks for the 'Share' tip - I never new that existed either.
    Good work
    B

  • Transport settings for ASA's

    Hi,
    Is there a way to change transport settings for archive collection based on groups?  We have ~1100 switches/routers that use telnet and 7 ASA's that use SSH. I have the transport order set to telnet first and then SSH.  This is causing ASA failed password attempts to be logged to the MARS appliance and I don't want the SSH passwords to be sent in plain text.  We are using LMS 3.2.
    Thanks,

    No, there is no way to tie transport settings to certain device types.  It's an all-or-nothing thing.  For what you want to do, set your protocol order to SSH then TELNET.  For the majority of devices, the SSH will fail, but you can be assured that the ASAs won't have that clear text password logged.

  • Removing the initial Import Settings Dialog

    i want Removing the initial Import Settings Dialog for all users and any new profils

    See https://bugzilla.mozilla.org/show_bug.cgi?id=286557#c38 (comments 38 and 39)

  • Initial customizing settings for SAP BI

    I wanted to find out initial customizing settings (in general) for introducing SAP BI 7 in the Environment assuming SAP ECC already working.
    Can anyone please list out area wise customizing activities(Extraction, Transform, Reporting)in achieving this.

    Hi,
    You will find the information in the below OSS Notes:
    OSS Notes 150315
    OSS Note 356018
    OSS Notes 192658
    -Vikram

  • K8T Neo FISR2 and Initial BIOS settings

    I’ve have a YANQ… (Yet Another Newbie Question)
    Are there any recommendations for initial BIOS settings for a new build?  I checked southmike’s  “My Unofficial K8t Neo Guide”  and searched posts.  I realize that many settings are based on Memory Configuration, OCing, personal preferences, etc.  But what I’m wondering if there is a basic configuration that has shown to be a good starting point for first time bring up?
    I have not received my board yet, so if this is covered in the manual, sorry for wasting the space
    Any thoughts would be greatly appreciated!

    Hi
    Apart from the Boot Sequence and the SATA / IDE settings you want, the best thing is run at safe defaults, and everything on auto, the mobo is good at selecting the best settings for good performance. And will probably perform better than if you try to tamper.
    There is a lot of things to help you DOT, Core Center, etc.
    cheers
    jocko

  • Final Cut Pro 7 initial setup settings (DSLR user) new user

    Hello Guys,
    I just bought Final Cut Pro 7 and installed it. Can anyone give me some tips on how to do an initial setup or how I should set up my Final Cut Pro. Scratch disk, ext.
    How can I optimize it for HD DSLR? I mainly shoot with Canon 5d and Canon7d DSLR with 24frames per second and I will importing and editing and capturing footage from these DSLR, how should I set the preferences and settings be on my final cut pro 7 best optimal use for these cameras.
    I also heard that I should be converting all the videos to pro res 422 before editing, so It can render faster or something like that. Can some please explain that pro res conversion part.
    I am also a new user, I have little knowledge on fcp, so please bare with my newbie questions. Thanks so much.

    Thanks Nick for the links, I'm actually a video guy, been doing corporate av video for concerts, professional sports, broadway theatre, and corporate evens, and also do my own videography on the side. But I am more of a shooter, I have used FCP in the past awhile back but I had a partner that did all of the editing. But I have used it FCP in the past, can't remember much though.
    Does anyone know which apple pro res format is best for DSLR editing. I see there is 422, 422(proxy), 422(HQ), 422(LT) and 4444.

  • Exporting PDF's - Initial View settings?

    Hey all!
    Is there any way from InDesign CS4 to set the Initial View of the PDF when exporting your layout to a PDF? I would like to be able to set the display of the Navigation Tab, the Page layout, Magnification, and a few security settings. Is this even possible? Or do I just have to do this from Acrobat? This might be where developing a script for Acrobat might be in my future
    Much thanks!
    Eric

    That must be done in Acrobat.
    Bob

  • Acrobat crashing when editing Initial View settings (3D ver 8.1.6)

    Two of my colleagues are experiencing crashes in Adobe Acrobat 3D Version 8 when they try to adjust the settings on the Initial View tab. (It's working fine for me, and we all have similar systems.) Any suggestions?
    Steps to recreate:
    Create a PDF. (Note: One coworker created a PDF from a Word 2003 document. The other created a PDF from a FrameMaker 8 document. The crash is happening for both of them.)
    Open the PDF in Acrobat 8.
    From the File menu, select Properties. The Document Properties window appears.
    Click the Initial View tab.
    Attempt to change some settings on this tab. (For example, change the Navigation tab option to Bookmarks Panel and Page.) Note: This is the point at which Adobe is crashing for my coworkers. They used to be able to adjust these settings, and we're not sure specifically when this functionality stopped working.
    Any help is greatly appreciated. Thanks.

    Hello try67,
    the system is an terminalserver where only a special group can use the Acrobat 8 pro. The other users only can view the PDF-Files with Adobe Reader.
    I have figuerd out the problem.
    The problem results from two registry keys.
    HKEY_CLASSES_ROOT\AcroExch.Document\shell\open\command
    HKEY_CLASSES_ROOT\AcroExch.Document.7\shell\open\command
    This keys are set to Adobe\Acrobat 8.0\Acrobat\Acrobat.exe.
    If you change this keys to Adobe\Reader 8.0\Reader\AcroRd32.exe all links in Office 2003 to PDF-Files will open for "normal" users the Adobe Reader and for the users in the special group the Acrobat 8 pro is opened.
    Regards
    Lukas

  • Custom Streaming Transport Settings

    I can't get QT preferences to retain custom settings for Streaming Transport. I need to see if I am receiving stream via http port 80 or UDP 554. Each time I change and apply settings then close the window, re-open preference the streaming Transport is re-set to automatic
    I have Windows version of QTPro 7.04

    My location: at work:
    If you are using a workplace computer on a local network this may well be the case. A Firewall blocks out all Internet traffic except those services that local network administrators consider essential. You will need to contact your local network administrators and have the University's streaming server included in the acceptable services. There's an adminsitrator's guide to allowing streaming Quicktime through a firewall <a href "http://www.apple.com/quicktime/resources/qt4/us/proxy/proxy.html">here. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.
    My location: at home:
    If you have a DSL router with a NAT firewall you will need to configure it to allow streaming media files. Open the Web-based interface for the router, select Advanced and choose "Port forwarding" (wording may differ for your router). Open port 554 for RTSP/TCP data and ports 6970 through 6999 (inclusive) for RTP/UDP data. Consult your router's documentation for specific instructions on configuring port forwarding, or contact the router vendor. To check to see that you can access any streaming movie, open the Quicktime Player and clicking Edit > Preferences > Quicktime preferences > Streaming transport. Click the Auto Configure button. Quicktime should confirm that it can use UDP/RTSP port 554. If it switches to http:// port 80, then you are most likely behind a firewall that is configured to block Quicktime streaming files.

Maybe you are looking for