Initial Uploading of Stock to MM

Hi Experts,
I need to upload the initial stock as MM stock. When I tried with MType 561, it goes to WM (Warehouse Management) Stock. So, I do not want to upload the stock to WM. I need to upload to MM Stock. Your valuable inputs are solicited.
K Bharathi

Shiva Ram wrote:
When you upload the stock, don't enter the storage location details (only maintain plant).
if you load stock, then you have to have a storage location, except it is special stock like stock at a subcontractor, or stock in a customer consignment.
Shiva Ram wrote:
Or use the storage location that is NOT tied to a warehouse.
> Regards,
I agree to this statement.
However, if you have to load stock and your location is setup to be warehouse managed, then you should test the real case. What can you gain from a test load to MM only when you finally have to load to a warehouse managed location?
if you load with 561 into a warehouse managed location, then the stock goes to storage type 998. And from there you do a WM internal movement (create a TO) to move the material from 998 storage type to the final bins.
No need for an extra MM movement, this adds just complexity without any benefit.
Depending on the complexity of the warehouse you might be able to post it to the final bins directly with the MM movement, you just need a small customizing for the movement 561.
In any case the WM-TO to move from 998 storage type to final bin can be created as well with a load program

Similar Messages

Initial upload of Stock in WM without creation Transfer order

Hi All,
I want perform intial stock upload (movement type 561) in a Plant and Storage Location. The Storage location is WM activated.
So I need to post 561 movement in IM i need then manual move the stock from Interium Bin to normal bin through Tcode: LT01.
Is it possible that I can upload the stock both in Stroage location and respective bin in one step without creating Transfer order.

Please check these answered links:
WM(Stock Upload WM)
Urgent-uploading initial stock in wm
Initial load for WM after MM implementation
Edited by: Afshad Irani on May 7, 2010 5:35 PM

Initial Uploading of Stock in Transit

Hi all
We are going Live by next week. But there are some materials which has been already dispatched and the stock are in Transit. But the Material will reach the Receiving plant after Go-Live only.
How to accomodate the Stock in Transit when doing Initial upalod.
Kindly suggest.
Regards
Madhesh Kumar

Hi,
Alternative is to re-enter purchase orders but treat them as a normal external vendor process rather than inter-company. To do this you would need to create the external vendors (exactly same as inter-company ones) but the STO config will be based on inter-company vendor number.
This way you don't need to worry about creating outbound deliveries etc.
Thanks.

Error when CRETING STOCK INITIAL UPLOAD USING MB1C

THE ERROR IS : The number range for document number assaignment has not been maintained in the year 2011 for the transaction event type WA.
we are getting this error while creating stock initial upload using t.code MB1C.
and another ERROR is : Number range for trans/event type WA in year 2011 does not exist.
please give me the solution to this error.
Moderator message:
Locked. Reason: 1) basic question 2) improper use of capitals
Please read forum rules before posting.
Edited by: Csaba Szommer on Jan 7, 2012 8:18 AM

Hi Dear,
Use T . Code u2013 OMBT, then go to change interval , then go to edit > insert year (f6) and mention in year 9999 and choose the number range interval from number to number and mention in current number is 0 and save exit.
Hope it helps you.
Regards,
Yawar Khan

Initial entry of stock (561) using MB1C

Hi all
Can someone help me understand how to create initial entry of stock using references.
I see there are options to create "To purchase order", "To Reservation", etc. Do they mean that we can create initial entry with reference to purchase order?
Also there is option to create with reference to Material document. What kind of Material documents can be used as reference?
Thanks in advance
Regards
Mui

Hi,
All this options are for other goods receipts means without reference to purchase order.
otions are To Reservation, To Order.This order means not Purchase order i.e Production Order or Internal Order.
Initial entry are used to Upload the stock at initial stage i.e at the time of Cutover strategy,we uploading the initial stock which is present at plant at SAP system and after that only we process the normal transaction like PO, MIGO..
Regards
Sanjay L

Asset Initial Upload & reporting for uploaded value

Hi SAP Gurus,
I have uploaded the asset data using AS91 and also updated the GL values in OASV.
The initial upload seems to be all correct in this manner since TB is tallying.
However when i view the FA reports for the date of upload i am finding discrepancies in the Accumulated Depreciation values as shown in the report & the values uplaoded in AS91.
Let me explain further, say for eg. the Cost of the asset was Rs. 10,000/- and Accumulated Depreciation as per legacy (as on date of upload) is Rs. 1858/-. However the actual Accumulated Depreciation should have been Rs. 1863 --- the diffference in legacy data was due to runding offs in previous months.
Now when i uploaded the intial data i used the legacy figures i.e. Rs. 10,000 & Rs. 1858 since trial balance had to be tallied.
However when i run reports in FA for the initial upload date, i find that the reports are showing the Acc. Depn (plan values) as Rs. 1863 & not the value that i have uploaded.
What possibly is the reason for this ?
Can anyone tell me any report to view only the uploaded information ?
Points will be awarded for useful answers.
Thanks & Regards
Piyush Kothari

Hi,
There is an error appearing as below:
"Report date 31.08.2007 is invalid for this report.
Reports of this kind can only be run for the last day of the period in which the last depreciation posting run took place (or in a subsequent period) in the relevant fiscal year.
It is not possible to run a report on posted depreciation in a fiscal year in which no depreciation posting run has yet taken place."
My legacy upload date was 31.08.2007.
When i run for 31.12.2007 (last period in the fiscal year for which dep. run has taken place) then the results are ok.
But still i would like to assign some points to you since this would have helped indeed.
Thanks
Piyush Kothari

Intial upload of Stock in Transit Material with in plant / Inter company

Hi Friends,
How can we do Intial upload of Stock in Transit Material with in plant / Inter company.
In this case accounting entries has already completed while doing post goods issue (thru SD route) or in 1st step 301 mov. type.
Now the material is in transit. While we go to new system how can do this without hit of aacounting entries.
I tried 565, it Intial upload of stock to Blocked, so accounting entries took place.
Regards
Sai Krishna

Hi,
What I am proposing is:
At this juncture both plants accounting has been done in legacy.
Coming to new system whatever stock we upload that much value only updated in receiving plant. In reality there is difference between legacy & new system in this case. In legacy stock in transit value also added in receiving plant (since we did PGI). If we do stock upload with 565 mov. type .. intial entry to blocked stock i.e value of inventory is matching the legacy.
Actual receiveal of material do transfer posting from blocked stock to unresticted stock.
What is your opinion.
We won't upload the G/L inventory, it will come thru stock upload for kishore infor.
Regards
Sai Krishna

Initial entry of stock balance

hi everbody
what will be the account posting in case
1) of initial entry of stock balance
2) of gr witout reference to po (mvt type 501)
in both case raw material account is hitting with transaction key bsx posting key 89 then what will be secind accounting entry ahd with what posting key.and which account will be hit(nature of a/c).
points will be given

Hi,
The following are accounts are updated with the transaction keys
1.Initial entry of stock balances:
Material stock account debited with account key BSX with posting key 89.
Intial entry account is credited with account key GBB-BSA posting key-91 and the account is expence account type.
2.GR without PO.
Material stock account debited with account key BSX with posting key 89.
Other purchases(purchases made without PO) account credited with accounting key GBB-ZOB with posting key 91and the account is of expence nature.
Thanks,
Rambhupal reddy

Initial update of stock with 561 movement type in MIGO

Dear All,
For the initial entry of stock into the system by using 561 movement in MIGO, the following error is being raised
Maintain Vendor for the excise invoice
Message no. 4F185
For this the plant has been created as vendor and all the excise details were maintained in J1ID.
But still the same error is being raised.
Please give a solution for this error.
Thanks & Regards,
Venkat.

Hi Venkat
Check again in J1ID Chapter id,Material and Chapter Id Combination ,and Vendor excise Details whether you have maintained or not, if not maintained it
also make sure that excise indicator for plant and vendor is active
Vishal...

Difference between initial upload & delta upload.

Hi experts,
Please tell me the difference between Initial upload & delta upload.
please tell me the characteritics of each upload.
Thanks & Regards
prajith P

Hello
These 2 load are performed for the data loading in CRM from other SAP system like ECC. Initial download is the activity that to be performed when you want to download the master data 1st time.
Delta load is performed automatically if we make any change in the master data records.
For the more depth knowledge you can go through the below mentioned links.
http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C03_CRM701_BB_ConfigGuide_EN_XX.doc
Points can be issued if you found you answer.
Thanks
Karan

Upload QI stock in SAP system

We are in cut over face of implementation project.
We have already QI stock for multiple materials outside SAP system, now we want to upload this stock in SAP system.
What is the best approach in this situation?

SAP has a standard process for this.
In the QM plant settings on the tab insp. lot creation, you shoudl find a field call "InstypeForInspStock".
Per the SAP standard, you enter 0800. (you can try another inspection type, but this one works!)
Make sure in config you have defined a task list usage for inspection type 0800.
Make sure you have not turned on QM for any of the materials you are planning on loading inventory for. If you already did, you'll have to use QA08 to deactivate all inspection types before doing the inventory load.
Load all your inventory, including the QI stock into QI stock via IM.
Use QA08 to turn on all your inspection types. On the QA08 screen you'll find an indictor "Activate despite insp. stock". Make sure this is clicked on when running QA08.
One you have run QA08 for all the materials, all those with stock in QI should now have inspection lots associated with them.
They will be an 08 origin and 0800 inspection typ.
Be careful. Once the inspection types are created, you won't be able to load additional qtys to QI via IM. You only get one shot.
FF

Data upload with stock catogories

Hi experts,
Can we upload the stock with their respective stock catogories through LSMW? Or through any other upload program?
Please advice

Hi,
yes its possible through LSMW .
Or you can upload with BDC/CATT.
regards

Pricing Condition Records initial upload - COND_A

Hi,
I have configured outbound COND_A pricing condition Idocs for Change documents. Whenever the pricing condition is changed IDoc will be generated.
Now my requirement is how can I do the initial upload of existing Pricing Condition records to legacy system? I mean how can I generate Outbound IDocs for existing pricing condition records to do initial upload.
Thanks in advance for your help.
Rgds,
AK

HI,
way1:
if you are using Sretail (ARTMAS) then you can use BD10 tcode with the flag "send all data".
In that case the COND_A for every ARTMAS is send.
way2:
1. if you want to send a all condition, then go to MEK3 choose your conditiont ype and push "condition Info".
2. Make your selection and go ahead with F8
3. Push "Send condition"

Probleme with Initial custmer consignment stock

Dear All,
Initially when client went to SAP. He had some consignment stock at customer site, in SAP same stock maintained as consignment stock, Eventually some of the consignment stock return back, In sap client done normal return delivery to get back these stock without any reference, so now he came to know that it result in double inventory. Also result in increase in stock account balance is standing in clearing acct. now he want to adjust this double inventory stock ,
So pls tell me how he can adjust initial customer consignment stock, also how adjust the account entries.
Pls Help

Hi,
Whenever we get back the stock from customer consignment.we should use consignment pick up doc.type KA and subsequent delivery.this transaction will add the customer consignment stock to the main stock
So in your case you done normal return process so consignment stock is same and extra qty stock is added to main stock.thats why inventory is doubled.
So reverse this normal return process and again do consignment process.
Thank you,

Upload FIFO stock items

Hi experts
we have a new client who uses FIFO method and we want to upload their stock data to SAP. Is there a documentation on this interms of entering the prices for difference layers etc
Can someone reply urgently
Thank you
Kind Regards

Hai!
U have to book opening stock layer wise.
ex:
Item - xxx - 5 qty - INR 20
Item - xxx- 4 qty - INR 30
Item - xxx - 3 qty - INR 20
Regards,
Thanga Raj.K

Initial Uploading of Stock to MM

Similar Messages

Maybe you are looking for