Initial User not getting populated

Hello
We have just upgraded from SAP 4.6 to ECC 6.0, there is a task to get Initial User details, in older version we were using binding workflow cont - 'workitem.workitemcreator' to task cont - 'Initialuser', In upgraded version the binding changed itself to workflow cont - 'Intialuser' to task cont - 'Intialuser', which does not populate the 'Intialuser' in task cont.
If i change workflow cont to 'workitem.workitemcreator' or 'inituser' the task goes in error. What should I do??? to populate 'Initialuser' of task cont.
Thanks
Bhavna

No, it's not a problem of an UI (portal).
"We also wrote a script that would fetch all the details of the users from the FIM DB and the values are blank there too. so i'm guessing there's no problem with the portal." -
I hope you know that it is highly not recommended to do any operations on DB directly?
Ok, you say that you create user programmatically on FIM. Is it via PowerShell or another way? If attrbiutes are blank in Request - it seems that they are not passed to FIMService correctly. Maybe some special characters in those fields in source?
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

  • ALV Block list. Field name at user command not getting populated

    Hi All,
    I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
    I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
    FORM user_command
              USING
              ucomm    TYPE sy-ucomm
                    selfield TYPE kkblo_selfield.
    What could be the possible reason?
    I appreciate your inputs.

    Hi Surya,
             Did you find the solution for this?
    Best Regards.

  • OVS value not getting populated in field

    Hi Experts,
    Kindly suggest me a solution for the below given issue.
    I have added three custom fileds to an already existing WD Coponent.
    And also added OVS help as an input help method to these fields.
    If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
    If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
    Below is the logic I have written.
    method ON_OVS_PAYMENT .
    TYPES:   BEGIN OF ty_payment,
                 payment TYPE char4,
                 desc    TYPE char30,
               END OF ty_payment.
    * declare data structures for the fields to be displayed and
    * for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
    *   add fields for the display of your search input here
          payment type char4,
    *      desc    type string,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
    *   add fields for the selection list here
          payment type char4,
          desc    type char30,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_payment       type string,
            lt_payment       TYPE TABLE OF ty_payment,
            ls_payment       TYPE ty_payment,
            lv_short         TYPE string,
            lv_table_header  type string.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
    *   in this phase you have the possibility to define the texts,
    *   if you do not want to use the defaults (DDIC-texts)
          ls_text-name = `PAYMENT`.  "must match a field name of search
          ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
          insert ls_text into table lt_label_texts.
          ls_text-name = `PAYMENT`.  "must match a field in list structure
          ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ls_text-name = `DESC`.  "must match a field in list structure
          ls_text-value = `Description`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.
          ovs_callback_object->context_element->get_static_attributes(
              importing static_attributes = ls_search_input ).
    *     pass the values to the OVS component
          ovs_callback_object->set_input_structure(
              input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
          if ovs_callback_object->query_parameters is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    ******** TODO exception handling
          endif.
    *     call business logic for a table of possible values
    *     lt_select_list = ???
          lv_short = <ls_query_params>-payment.
          CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
          EXPORTING
          i_payment             = lv_short
          TABLES
          ET_PAYMENT            = lt_payment.
        lt_select_list[] = lt_payment[].
          ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
    *   apply result
          if ovs_callback_object->selection is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `PAYMENT`
                                   value = <ls_selection>-payment ).
          endif.
      endcase.
    endmethod.

    Hi Pradeep,
    I don't think it really make any difference to the application run if we run from SE80 or run via application url.
    Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
    Regards,
    Rama

  • Default Value in a DFF is not getting populated in Self Service Page

    I had an issue in Self Service Page.
    In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
    But this field is not getting populated with the default values.
    But this is working fine in Forms , i.e the default value is populated in forms.
    Why the default value is not populated in Self Service Pages?
    For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
    Context Code : GB_CODE
    Segment : "Enter the Group"
    and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
    In forms if am not entering any value, then its defaulted to 'XXXXX'.
    But in Self Service this is not happening.
    Can anybody help me out...

    Actually, I have narrowed down the problem. It is not quite the same.
    DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
    So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
    We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
    Any thoughts?
    Thanks much!

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Search Help for Vendor Feild not getting populated in the Screen Element

    Hi Everyone,
    In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
    The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
    Now that the search help exists and I can drill down the values too but when i select/choose any value,  that value is not getting populated in Screen feild.
    is there any validation I need to do for this.
    Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
    Regards,
    Raj

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • XREF3 field not getting populated in BSEG table while posting MIRO

    Hi,
         I have one query in MIRO tcode.I have activated xref3 field in MIRO tcode using enhancement LMR1MF6Q.Now when i try to post document with some values in xref3 field on screen ,value is not getting populated in BSEG table.Please tell me what else needs to be done to achieve this ?
    any hint on this?
    Thanks & Regards,
    Soniya S.

    Hi,
    1.- According to SAP Note 904652 - MIRO: Different from FB60
    https://service.sap.com/sap/support/notes/904652
    MIRO is an independent Materials Management (MM) transaction that does not
    claim to be the same as the accounting transactions (such as FB60 or FB01).
    MIRO was developed to allow users to process vendor invoices within the
    context of the MM procurement processes as simply as possible.
    For this reason, among other differences, the field selection was limited
    to the absolutely necessary. For example, the following fields from the
    accounting document are not available in Transaction MIRO (this list is not
    complete):
    Reference key (BSEG-XREF1, -XREF 2, -XREF 3)
    2.- SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment
    https://service.sap.com/sap/support/notes/1156325
    Have a look at badi MRM_ITEM_CUSTFIELDS.
    This badi will create a new tab at item level in order to display the new fields.
    I haven´t used this badi so i cannot talk from experience here.
    Think twice before deciding.
    Best regards.

  • Data not getting populated in Payslip in ESS Portal

    Hi All
    I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
    Correct Payslip form is visible but data is not getting populated in the payslip.
    Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
    Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
    Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
    what is role of PZ11_PDF transaction in Payslip display in Portal?
    Regards
    Asha

    Hello,
    Do one thing for executing the PZ11_PDF trsaction please follow following steps.
    1. Once you log in SAP system with same User - Id which you r using on Portal .
    Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
    Call the salary statement .
    Or
    Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
    call the salary statement ..
    give inputs once you done
    .....The issue with  Authorisations please check it ...
         Add this object in ESS role "S_SERVICE' ...
        and this object in ESS role "P_PERNR" ---infotype 0008
    Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

  • Currency Field is not getting populated in 0FI_AR_3 Data source

    Hi Friends,
    I have unchecked the currency  fields DMBE2 , DMBE3 and curresponding currency type fields HWAE2
    and HWAE3 in the data source 0FI_AR_3 and activated the DS.
    when i am checkin the data using extract checker rsa3 , the fields DMBE2 and DMBE3 are filled with the amount but the corresponding currency types are not getting populated in HWAE2
    and HWAE3 fields.the currency field are maintened in R/3 side.
    Please suggest.
    Thanks

    I was checking this issue, and all the enhancements with fields need to
    have a customer-exit to be populated.
    If those fields are not delivered by SAP and are not in the original
    datasource(RSA5) from Business content, this is related to an enhancement.
    We can only see these fields in the datasource enhanced through RSA6.
    To have the proper values assigned to those field, you should write an
    User Exit program. This program must be created to fill the enhanced
    fields as they are not filled in the same way as the SAP delivered
    fields.More details about this process you can check note 576886.
    576886-Change to user-defined fields not extracted.
    This SAO Note is an example for some datasources regarding what should be
    done.
    Thanks,
    Walter Oliveira.

  • Condition type not getting populated at first line item of Sales order

    Hi Experts,
    We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
    we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
    Let us know  there are any other possible ways to find the same
    please help.
    Thanks!

    Hi Rajani,
    check the user exit in the FM..IDOC_INPUT_ORDERS
    check if any filters kept for condition type field..
    check the belwo user eixuts
    ORDCHG I VEDB0001 Sales Ord. Change
    ORDERS I VEDA0001 Sales Orders..
    Regards,
    Prabhudas

  • Dbacockpit overview pane does not get populated

    Hi guys,
    I have already gone through the several other threads on sdn which repeat the same issue here but I am not able to find a solution via them. Can any one give me some leads into this...
    -- CHANGES DONE --
    We applied all relevant support packs which were part of Support stack 13. This involved also patching SAP BASIS from 10 to 13. Also NW04S 700 kernel was upgraded to patch 114 (SAPEXE and SAPEXEDB SAR packages)
    STATEMENT OF PROBLEM(S)
    Tcode dbacockpit does not refresh data in the overview pane.
    note: db02old still works and we are able to refresh stats from there but dbacockpit overiew pane does not get populated.
    Also post support packs: “sap_collector_for_performance” runs successfully but reports in job log “database system is not supported”
    When we do a refresh via dbacockpit, the job “refresh space statistics” ends with a “compute bcd overflow” dump.
    CHECKS ALREADY MADE
    --Note 1066044 – for the BCD overflow dump – does not help. We are already at BASIS pack 13 and the correction contained in the note is already in place. As
    per the note since are already at BASIS SP13 we should not be facing this. Why are we facing this then ?
    --Note 868063
    Call report rsoracup; put in con_name=DEFAULT; operatio=CREATE;F8 – did this.
    --Note 1002840.(checks done as per note)
    a) Check if SAP_Collector_for_perfmonitor is scheduled hourly
    It completes successfully but gives job log below
    1/16/2007 12:06:14 Job started
    1/16/2007 12:06:14 Step 001 started (program RSCOLL00, variant , user ID DDIC)
    1/16/2007 12:06:14 Clean_Plan:Cleanup of DB13 Plannings
    1/16/2007 12:06:14 Clean_Plan:started by RSDBPREV on server
    1/16/2007 12:06:14 Clean_Plan:Cleaning up jobs of system xxx
    1/16/2007 12:06:14 Clean_Plan:finished
    1/16/2007 12:06:15 Database system not supported
    1/16/2007 12:06:17 Job finished
    Why ?? (we got oracle 10.2.0.2)
    b) se16 -> table TCOLL. Check if entery RSORACOL exists.
    It does exist as below
    RNAME RSORACOL
    RENUM 1
    SYTYP S
    ALTSY
    DAYOW XXXXXXX
    TIMOD XXXXXXXXXXXXXXXXXXXXXXXX
    c)SE16 -> table ORA_MON_DBCON. Check for enrry con name: DEFAULT.
    It does exist as below
    CON NAME DEFAULT
    STATUS A
    MAX RUNTIME 1,800
    MAX UPLOAD 1,000,000
    LOG LIFE 100
    DESCRIPTION Local database. R/3 system available.
    d)se16 -> table db02_coll_plan. Check if all the entries have status A and there are 64 entries. This is ok
    --Note 1042725
    SE16-> PROGDIR for Name= 'LSDBORA3F03'; Set field EDTX to blank
    All entries have EDTX blank but there is no entry 'LSDBORA3F03’
    Despite all the above checks I am unable to get the dbacockpit to refresh. Does anyone have any ideas. Will putting in the latest DBSL shared library patch for oracle solve this... I did SAPEXE and EXEDB.SAR latest. Any ideas...?
    Cheers, Vikram
    [email protected]

    For this issue it's still not working for me in Sanbox BI. I got a SAP message open for this. But I got it to work on Dev and TST systems. There was one mistake I was making. This may not be the cause though but just for your info. When we go to dbacockpit, click on collector setup icon. And there when we give connection name = "default" and then action as "create connection", I was not saving the variant. Click save and give a name to the variant like "refresh stats" or something. Then click refresh icon so that the "Refresh space statistics" will run in background. When I saved the variant on dev and test BI I did not end with a BCD overflow dump for the  "refresh space statistics" job.The refresh space stat job needs to find the variant name.And this then populated the dbacockpit -> space -> overview pane. Although the "perf for monitor" job still has log entries "db system not supported" that doesn't matter. It's probably a message we can ignore.
    Also if you are still facing prob, check these.
    You say you are on SP12 which SP component are you referring to (stack number ?. BASIS ? BW ?). Make note I have done the support stack 13 which contains upto the BW patch upto 15 and upto BASIS patch 13. Note 1066044 says if you have BASIS 13 you won't face this problem .
    Is your "perf for collector" job running without issues. That is a prereq to the "Refresh space stats" job. Try to troubleshoot that as well. I think the refresh stats job has to find the data in table MONI which gets populated via "perf for collector" (RSCOLL00).
    regards, Vikram

  • Field in ALV not getting populated

    Hi all,
               I need some help. I am displaying an ALV with fields.
        GROUP     G/L ACCOUNT     Local currency       USD     Period
           100              10                       5                       5           12
           100               11                      6                       4            12
      now i have added an extra field TXT20 in the as last field of structure
        GROUP     G/L ACCOUNT     Local currency       USD     Period      TXT
           100              10                       5                       5           12          aa
           100               11                      6                       4            12         ab
    TXT should come as 3rd coloumn in the output.
    EXAMPLE:
         GROUP     G/L ACCOUNT       TXT      Local currency  USD     Period     
           100              10                      aa                  5              5           12         
           100               11                     ab                   6             4            12        
    I have changed the coloumn positions in the field catalog accordingly and I have not written or changed any select queries from earlier output.
    now my problem is PERIOD field is not getting populated in the ALv,the data is visible in the IT_FINAL which I am passing to Reuse_alv_grid_display. the field catalog is also getting build properly.
    so plz suggest some changes so that I can move ahead.

    Hi
      I don't know what's the reason and now I have no environment to test it, but you can try other way:
      1. define your fieldcate one by one as the sequence of your output like
          GROUP         G/L ACCOUNT          TXT           Local currency         USD          Period
          In this situation, you needn't use component -- position of fieldcate structure. Pay attention to
          fieldname in upper case.
       2. If only doing step1 has no effect, then adjust your structure of internal table. Sequence your
           component of IT_FINAL as the output field like step1.
       If still no effect, please let me know.

  • IS Retail - Inventory - Retail price BWGV0 is not getting populated

    Hi ,
    We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
    Thanks
    Hareesh

    Some documents below might worth taking look..
    Process key logic for MM inventory can be found in OSS note 492828
    Logic for MM purchasing can be found in note 684465
    Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
    352344
    492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
    Hope it Helps
    Chetan
    @CP..
    Hope it Helps
    Chetan
    @CP..

  • Values not getting populated in the o/p

    Hi,
    I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
    Regards,
    Hema

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

Maybe you are looking for