Initial value in transformation

In 3.5 update rules there was an option of setting the value as initial value. How can I do this in a BI 7 transformation?
Thanks

This is still possivle wihtin transofrmatio's rule to set value of IO to initial one. One of "Rule Type" is "Initial":
The field is not filled. It remains empty.
Check out it in docu:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e5/f913426908ca7ee10000000a1550b0/frameset.htm

Similar Messages

What the Initial value for sy-tabix & sy-index

Hi Folks
I have a small doubt.
What the Initial value for sy-tabix & sy-index?
Can anyone please clarify me?
Regards,
Sree

hi sree,
both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
if helpful reward some points.
with regards,
suresh babu aluri.

Initial value and value in the database

Hello world ,
i want to add initial value with value in the database depend on the date
for example i have initial value for 30/09/2009
i and to all it with value in the database in 31/12/2009
take a look what i did
PROCEDURE pkd_prem IS
cursor gr_pkd_prem is select
SUM(DECODE(mark,'01',FM_mark,TM_mark) A,
SUM(DECODE(FMS,'01',LS,NS) b
from fr_treaty_profile ftp, fr_monthly_summary
where
(ftp.tpr_cgp_id = fr_monthly_summary.fms_cgp_id )
AND (ftp.tpr_cmp_id = fr_monthly_summary.fms_cmp_id )
AND (ftp.tpr_treaty_origin = fr_monthly_summary.fms_treaty_origin )
AND (ftp.tpr_uw_year = fr_monthly_summary.fms_uw_year )
AND (ftp.tpr_class = fr_monthly_summary.fms_class )
AND (ftp.tpr_type = fr_monthly_summary.fms_type )
AND (ftp.tpr_serial = fr_monthly_summary.fms_serial )
AND
(fr_monthly_summary.fms_treaty_origin=:BLK1.EO_ORIGIN) AND
(fr_monthly_summary.fms_uw_year=:BLK1.EO_UW_YEAR) AND
(fr_monthly_summary.fms_class=:BLK1.EO_CLASS) AND
(fr_monthly_summary.fms_treaty_type=:BLK1.EO_TYPE) AND
( fr_monthly_summary.fms_treaty_serial=:BLK1.EO_SERIAL)
AND (FMS_TYPE ='P')
AND FMS_SERIAL = '01'
AND (FMS_OFC_ID !='X')
and (FMS_YEAR =substr(to_char(:BLK1.EO_TRNX_DATE,'DD/MM/YYYY'),7,4))
and (FMS_PERIOD between substr(to_char(:BLK1.EO_TRNX_DATE,'DD/MM/YYYY'),4,2)-2 and substr(to_char(:BLK1.EO_TRNX_DATE,'DD/MM/YYYY'),4,2)) ;
---Initial value
cursor base is select EO_GR_BKD_PREM from FR_EN
where
EO_TREATY_ORIGIN=:BLK1.EO_ORIGIN AND
EO_UW_YEAR=:BLK1.EO_UW_YEAR AND
EO_CLASS=:BLK1.EO_CLASS AND
EO_TREATY_TYPE=:BLK1.EO_TYPE AND
EO_TREATY_SERIAL=:BLK1.EO_SERIAL AND
EO_YEAR=:BLK1.EO_YEAR;
A number(18,3);
B number(18,3);
v_base number(18,3);
BEGIN
open base;
open gr_pkd_prem;
fetch gr_pkd_prem into a,b;
fetch base into v_base;
:BLK1.EO_GR_BKD_PREM :=nvl(a,0)+ nvl(b,0)+ nvl(v_base,0);
close gr_pkd_prem;
close base;
END;
the proceudre is correct and the values come as i want
but here
FMS_PERIOD between substr(to_char(:BLK1.EO_TRNX_DATE,'DD/MM/YYYY'),4,2)-2 and substr(to_char(:BLK1.EO_TRNX_DATE,'DD/MM/YYYY'),4,2))
suppose i will add from 6 to 9
the value will come down to add with base value
but next time i want from 10 to 12
it will add value 10 to 12 with the base for just period 10 to 12
i want to keep adding
if i start from 6 to 9
then shoud be
add the value of 6 to 9 to 10 to 12
but

look ..
i created a form and let's say there is one field called Base ..
and i inert value on that field and saved .
then
i created cursor to fetch value from another table
that value which i fetched from another table must add to past value
take this scenario
i started with value 6
then i fetch by cursor value from 1/1/2010 to 31/3/2010 and that value = 33
first action
6+33
then
i fecth by using cursor from 1/6/2010 to 30/9/2010 and that value = 2
the result of first action must add with the last value which is 2
(6+33) from first action plus(+) 2 and display the result on the secreen

What is reason for cl_fpm_factory= get_instance( ) return initial value?

In DEV system, this piece of code is working fine. However when it moves to Testing system it dump due to cl_fpm_factory=>get_instance( ) return initial value. What could be the reason for this? Thanks!
data lo_fpm type ref to if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
wd_this->go_message_manager = lo_fpm->mo_message_manager.

Hi Anthony,
how sure are you that the DEV and Test system running the same Netweaver SP versions ?. My doubt is that the test system is not NW7.01 (Ehp-1) . Or some thigs are not enabled in the configuration.
Regards
Senthi

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Problem setting initial value for LOV

Hello, everyone. This seems like it should be simple, but it's giving me lots of problems. I am trying to create my first LOV. I have a messageLovInput item called PFedFilingStatus. From the Property Inspector, I can set an Initial Value of "02", which displays when I run the page, and lets me change it and validate it using the associated LOV.
What I would rather do is set the initial value programmatically, but here are my problems:
If I set the value like this:
OAMessageLovInputBean lovText = (OAMessageLovInputBean)pageLayout.findIndexedChildRecursive("PFedFilingStatus");
lovText.setText("02");
then the field displays properly at run time, but can't be changed. The LOV runs, but any value I select flips back to "02"
If I set the value like this:
lovText.setDefaultValue("02");
then nothing seems to happen at run time. The value is not displayed at all.
Can anyone tell me what I am doing wrong? Thanks for your help.
--Dave

Yes, that helps a bunch. Now can you tell me where that is set?
Thanks so much.
--Dave

Default initial value for opportunity field

Hi all,
What is the fastest and most elegant way to achieve this requirement:
When user clicks create opportunity the field "Relevant for forecast" should be default unflagged. Currently it defaults it to be flagged. It should only happen at creation time. The user should be able to flag the field again before saving. So basically I need to make sure that the defaulting is only done once in the lifetime of an opportunity (i.e. at the very first creation).
Br,
Anders

Hi,
1) Enhance your component
2) Enhance view "BT111H_OPPT"
3) Generate GETTER/SETTER for "STRUCT.FORECAST_REL" in context node "BTOPPORTH"
4) Add the following code at the end of the method "GET_FORECAST_REL"
IF value IS INITIAL.
* value = 'X' -> to check the checkbox if initial
value = ''.
ENDIF.
This should work, but I have not tested it in this case.
Kind regards
Michael

Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

Gurus
I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
I have a filter in DTP as a routine to get the year from system date.
The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
Incorrect initial value for characteristic 0FISCYEAR in i_t_range
Message no. DBMAN889
appreciate any help I can get to reoslve this ASAP.
Thanks in advance

Hi
Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

Incorrect initial value for characteristic 0fiscyear in i_t_range

Hi,
While extracting the data from the source DSO to Target I got an error message like '' Incorrect initial value for characteristic 0fiscyear in i_t_range".
what is the step should i take to resolve this?
Thanks in Advance.

Gurus
I have the same problem with my ABAP code written in DTP filter.
Can anyone please help what needs to be done , I am getting this error when I try to load the data to cube.

What is the purpose of the Initial Value checkbox in SE11?

Hi,
When we create database tables using SE11, there is a Initial Value checkbox for the fields that we create. How do we make use of this checkbox?
For example, after checking the Initial Value checkbox, how do I go about entering the intial value? There isn't a input field for me to do it. Thanks.

"Initial values" Flag ---> Indicator that NOT NULL is forced for this field
Select the flag if a field to be inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field.
Please note that fields in the database for which the this flag is not set can also be filled with initial values.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.
Restrictions and notes:
The initial value cannot be set for fields of data types LCHR, LRAW, and RAW. If the field length is greater than 32, the initial flag cannot be set for fields of data type NUMC.
If a new field is inserted in the table and the initial flag is set, the complete table is scanned on activation and an UPDATE is made to the new field. This can be very time-consuming.
If the initial flag is set for an included structure, this means that the attributes from the structure are transferred. That is, exactly those fields which are marked as initial in the definition have this attribute in the table as well.
Hope this helps.
Thanks,
Balaji

Initial value for a dropdown box

Hello all,
I have created a web template in the WAD (BI 70) with a dropdown box on a characteristic. A chart is displayed based on the query result. My query is built on an infoset.
My problem is to populate the filter with an initial value and still let users change the characteristic value in the dropdown (all values for the characteristic is not acceptable in the context) . Also, I don't want the variable screen to show up.
What is the best approach to achieve this?
Thanks,
JL

In Query Designer you put in your default value in the area to the right in the first pane..
If you put it on the left hand side, the filter will not be changeable.
Hope this helps.
Can give more presise answer if you need it.

What is the initial value for a numeric field ??

Can someone tell me what the INITIAL VALUE FOR A NUMERIC FIELD is ?? Thank you
Rod.

Using the following...
   class MyClass
     int myvar1; // Default initial value
     int myvar2 = 3; // Default initial value and default value
     MyOtherClass myclass1; // Default initial value
     void doit()
       int mylocal1; // No value
       MyOtherClass myclass2; // No value
All number member variables, like myvar1 start off with andefault initial value which is zero. For booleans this is false. Object reference variables, like myclass1, have a null value.
All local numeric variables are considered undefined. So mylocal1 and myclass2 are undefined. Before you can use them you must explicitly provide a value.
Finally note that myvar2 will have two values during class instantiation. Initially it will have a value of zero. Sometime later it will have the value of 3. (When that happens is very definitely outside the scope of what this forum covers. If you want to know then ask in the advanced forum.)

Sequence created in anon PL/SQL missing initial value

If I create a sequence in an anonymous PL/SQL block, with execute immediate, then perform a select nextval from that sequence outside the block, it misses it's initial value.
Easily reproducable here:
create table tab_a ( col_a number(4) not null );
begin
execute immediate 'create sequence seq_a start with 47 increment by 1';
end;
insert into tab_a select seq_a.nextval from dual;
select * from tab_a;
This is a much simplified representation of the circumstance I found myself in, but it reproduces the effect I see.
If I drop the sequence and truncate the table, and run the statements (excluding the first) again, it works as expected. If I drop the table and run all the statements again, it returns the wrong answer again.
I don't need a workaround, the issue has been addressed long ago, but I would like to know WHY this happens. starting the sequence at 47 can be any number, it's there just to show the issue when 48 is inserted into the table. The insert could be into any table, and the from could be over any table rather than dual.
Oracle EE 11.2.0.1.0 on OE Linux, RAC and Single node.
TIA.

Can you show the output you get like this? Mine is a 10g DB. But sure it would work in 11g DB as well.
SQL> select * from v$version where rownum = 1;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
SQL> drop table t;
Table dropped.
SQL> create table t (no integer not null);
Table created.
SQL> begin
2     execute immediate 'create sequence seq start with 47 increment by 1';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> insert into t select seq.nextval from dual;
1 row created.
SQL> select * from t;
        NO
        47
SQL>

Setting initial values on structures

I have written a middle-ware wrapper which allows me to call a SAP RFC from SQL Server stored procedures. I am upgrading it from the DCOM to the .Net connector so I can run it on Windows 2003 Server.
When I set a string value (SAP C type) to initial I get the error "Object reference not set to an instance of an object." raised in the proxy object. This error does not happen for non-initial values, and also does not happen on my development workstation. It happens if I set the string to "" or to " ". It occurs on two servers - Windows 2000 and Windows 2003.
I can't figure out how to debug this, and can't find anything in this forum or on SAP Notes. Has anyone else found this error?

A clear head in the morning makes all the difference. There was no problem with the .Net Connector.
The problem lay with SQL Server's sp_OAMethod procedure, or possibly in the .Net component's CCW. If you pass an empty string in as an argument, your component gets a Nothing. I therefore fixed it in the component with:
If Value Is Nothing Then Value = ""
Thanks,
Derek

How to use bind variable value of one VO as initial value for other VO row?

JDeveloper 10.1.3.3, ADF Faces, ADF BC
Hi,
I have two View Objects: one read only with several bound variables and another editable entity based. Correspondingly there are two ADF Faces pages: first contains search form based on the read-only VO and second create form based on the editable VO. The search form has several hidden fields for some of bound variables because they aren't edited directly by user. These fields are updated with PPR when user selects other search criteria from LOV.
There is a command button in the first page that navigates to the second form. Is there any way to transfer values of bound variables from the first VO to the second VO as initial values of the new row?
I tried to set custom controller for the second page and retrieve search criteria values from request parameter map but values from hidden fields are missing. I think because that these fields are updated by PPR. Of course I can add custom action method to the navigation button and in the method put these values to request parameter map but I hope there is better solution.
Thanks,
Marius

To summarize, given a bind variable value for one VO, on creating a row in a second VO, for 1 of the attributes of the second VO, you want to use the first VO's bind variable value. Correct?
A potential solution ADF BC driven:
1) Ensure you have an AppModuleImpl for your AM
2) Ensure you have a ViewImpl for your 1st VO (where the bind variable will exist) - lets refer to that VO as "Alpha"
3) Ensure you have a ViewRowImpl for your 2nd VO (the one you want to default the value in) - lets refer to that VO as "Beta"
4) For your first VO "Alpha" create the bind variable (say pValue)
5) In your second VO "Beta" ViewRomImpl add following code:
@Override
protected void create(AttributeList attributeList) {
super.create(attributeList);
AppModuleImpl am = (AppModuleImpl)this.getApplicationModule();
String someValue = am.getAlphaView1().getpValue();
setSecondVOAttr(someValue); // change this code to whatever your setter is for the field you want to initialize.
}Hope this helps. Let us know how you go.
Regards,
CM.

Initial value in transformation

Similar Messages

Maybe you are looking for