Initialisation extracts too less data

I'm running an initialisation of the 0FI_GL_4 extraction to BW. In terms of settings in the InfoPackage it is nothing special and I don't do any selections on the first tab (dataselection) of the InfoPackage.
However, the initialisation only brings up data from fiscalyear/period 2002.001 till 2003.008. And this I don't understand as the tables BSEG and BKPF in R/3 also contain data for 2004.
Can someone explain how this is possible? I would expect all data in the tables to be extracted. Can an init be restricted in anyway? Or am I not seeing things straight?
Thanks in advance for your help! And of course it will be rewarded...
Kind regards,
Hans
Message was edited by: Hans de Klein

Mmm.. I'm wondering what would make the difference to delete the delta queue. Then your assumption would be that the records of >2004 are in the delta queue, so they are not extracted on initialisation?
It is not quite clear to me, moreover because the delta queue is not used for 0FI_GL_4.
Could you explain your theory?
Thanks in advance.

Similar Messages

  • We are exporting data to the SAP Business one. Error: "The field is too small to accept the data you attempt to add. try inserting or pasting less data"

    Hi,
    I have exported the data from two sources, MS-Excel and SAP Business One to Sap Business One (8.81). While exporting the data, I got the error "The field is too small to accept the data you attempt to add. try inserting or pasting less data" for the first time, Immediately when I run it again, it shows export successfully completed, but nothing is changed in the SAP Business One. Could you please provide the solution as early as possible?
    Thanks & Regards,
    Chaitanya.B

    ok
    i solve the problem.i rezise the colomn size
    thanks

  • WAD : Result set is too large; data retrieval restricted by configuration

    Hi All,
    When trying to execute the web template by giving less restiction we are getting the below error :
    Result set is too large; data retrieval restricted by configuration
    Result set too large (758992 cells); data retrieval restricted by configuration (maximum = 500000 cells)
    But when we try to increase the number of restictions it is giving output. For example if we give fiscal period, company code ann Brand we are able to get output. But if we give fical period alone it it throwing the above error.
    Note : We are in SP18.
    Whether do we need to change some setting in configuration? If we yes where do we need to change or what else we need to do to remove this error
    Regards
    Karthik

    Hi Karthik,
    the standard setting for web templates is to display a maximum amount of 50.000 cells. The less you restrict your query the more data will be displayed in the report. If you want to display more than 50.000 cells the template will not be executed correctly.
    In general it is advisable to restrict the query as much as possible. The more data you display the worse your performance will be. If you have to display more data and you execute the query from query designer or if you use the standard template you can individually set the maximum amount of cells. This is described over  [here|Re: Bex Web 7.0 cells overflow].
    However I do not know if (and how) you can set the maximum amount of cells differently as a default setting for your template. This should be possible somehow I think, if you find a solution for this please let us know.
    Brgds,
    Marcel

  • My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    Yes, windows to Mac too.
    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • How to change too less than 4seconds...

    I have more recordings,
    they are less than 4 seconds,
    When i want to make a cd of it,  it doesn't work,
    Because these recordings have to be more than 4 seconds in length.
    How can i change this?

    Many thanks for the useful info from both, Bob Howes & Ryclark
    Date: Thu, 4 Nov 2010 09:22:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: How to change too less than 4seconds...
    Ryclark is, alas, spot on.
    In the bad old days I used to use CD to playback sound effects in the theatre and many of these were less than 4 seconds duration.  I used to have to edit in a few seconds silence at the end of all the short effects to keep the CD format happy.
    Bob
    >

  • Query Error Information: Result set is too large; data retrieval ......

    Hi Experts,
    I got one problem with my query information. when Im executing my report and drill my info in my navigation panel, Instead of a table with values the message "Result set is too large; data retrieval restricted by configuration" appears. I already applied "Note 1127156 - Safety belt: Result set is too large". I imported Support Package 13 for SAP NetWeaver 7. 0 BI Java (BIIBC13_0.SCA / BIBASES13_0.SCA / BIWEBAPP13_0.SCA) and executed the program SAP_RSADMIN_MAINTAIN (in transaction SE38), with the object and the value like Note 1127156 says... but the problem still appears....
    what Should I be missing ??????  How can I fix this issue ????
    Thank you very much for helping me out..... (Any help would be rewarded)
    David Corté

    You may ask your basis guy to increase ESM buffer (rsdb/esm/buffersize_kb). Did you check the systems memory?
    Did you try to check the error dump using ST22 - Runtime error analysis?
    Edited by: ashok saha on Feb 27, 2008 10:27 PM

  • Result set is too large; data retrieval restricted by configuration

    Hi,
    While executing query for a given period, 'Result set is too large; data retrieval restricted by configuration' message is getting displayed. I had searched in SDN and I had referred the following link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d047e1a1-ad5d-2c10-5cb1-f4ff99fc63c4&overridelayout=true
    Steps followed:
    1) Transaction Code SE38
    2) In the program field, entered the report name SAP_RSADMIN_MAINTAIN and Executed.
    3) For OBJECT, entered the following parameters: BICS_DA_RESULT_SET_LIMIT_MAX
    4) For VALUE, entered the value for the size of the result set, and then executed the program:
    After the said steps, the below message is displayed:
    OLD SETTING:
    OBJECT =                                VALUE =
    UPDATE failed because there is no record
    OBJECT = BICS_DA_RESULT_SET_LIMIT_MAX
    Similar message is displayed for Object: BICS_DA_RESULT_SET_LIMIT_DEF.
    Please let me know as to how to proceed on this.
    Thanks in advance.

    Thanks for the reply!
    The objects are not available in the RSADMIN table.

  • My daughter has sent me over 100 photos via 8 messages and can't see them as message crashes every time I try to open, probably too much data but what do I do?

    My daughter has sent me photos to my iPad mini, when I go to messages it crashes, probably too much data, what can I do?

    My daughter has sent me photos to my iPad mini, when I go to messages it crashes, probably too much data, what can I do?

  • Extract work order data from r/3 system in flat file(csv)and export to BI

    Hi,
    I am new in interface.
    I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
    This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
    Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
    Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
    Please provide the step-by-step proces to do this.
    Thanks
    Suchi
    Moderator message: anything else? please work yourself first on your requirement.
    Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

    Hi Ravi,
    you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
    BR Michael

  • How to extract the historical data from R/3

    hi
    I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
    how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
    regards

    Hi Satish,
    As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
    After data source enhancement it is supported to load normally because you don't get any historical data for that field.
    Best way is to take down time from the users, normally we do in weekends/non-business hours.
    Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
    1. Load set-up tables by yearly basis as a background job.
    2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
    This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
    Then after you can load all the data into BI first into PSA and then into Cube.
    Regards,
    Ravi Kanth.

  • How to extract 64 bit data from imaq image using IMAQ Extract VI

    I have LV 8.5.1, Vision 8.5 and need to extract 64 bit data from a 64 bit image and I get the "invalid image" error while using the IMAQ Extract VI.  What version of Vision do I need to allow me to do this? 
    Currently, the work-around I have...
    1) convert the image to 32bit
    2) use the ROI tools I to get the rectangle data I need
    3) then go back to the original image and the convert the image to a 64 bit array
    4) take the rectangle data to extract the data needed out of the 64 bit array data.
    klunky but it works.  I would think that the IMAQ Extract tool should allow me to extract the 64 bit data but it doesnt... forces me to 32 bit.
    suggestions?

    steve05ram360 wrote:
    awesome, that does work. 
    Attached DLL slightly corrected and should be OK also "in place" when Dst is not connected like original IMAQ function. Hopefully it works properly now. By the way all IMAQ types are supported, not only U64.
    Andrey.
    Attachments:
    ADVExtractDLL.zip ‏9 KB

  • Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

    since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

    I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
    The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
    The crashing were stopped! also the battery was back to normal.
    I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
    There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
    I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
    I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
    Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
    After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
    Adding the mail accounts back, still everything work ok
    Hope this solution will help you too,
    Enjoy!

  • Unable to extract Customer Master data from MDC

    Hello,
    We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
    First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
    I have created a New Variant which properties are:
    Variant: CUSTOMER_TOTAL
    Description: Send all customer data to MDM
    Extraction Object: CUSTOMER_EXTRACT.
    Target System: PI7.
    But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
    We need to focus the problem. We have done the following ALE configuration.
    SALE transaction:
    In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
                  EUS100
                  MDM: Master Data Management
                  PI7: Process Integration 7.0
    WE21:
    Transactional RFC -> PI7, IDOC record types SAP Release 4.x
    RFC destination: SAPSLDAPI
    BD64
    New Model -> PFMC
    Add message type: Model iview: PFMC
                                 Sender: EUS100
                                  Receiver: PI7
                                 Message Type: DEBMDM
    WE20 transaction shows:
    Partner profiles -> Partner Type LS (logical system)
                        PI7: Outbound parmtrs. DEBMDM, SYNCH.
    Any idea will be very helpful,
    Thanks in advance
    Marta.
    Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

    Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
    In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
    SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
    before that I have done the following steps at SAP ERP:
        1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
        2. SM59: I have checked successfully 700PI70CLNT RFC connection.
        3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
        4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
    and at SAP PI:
         5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
         6. technical and business system for sender SAP system(System Landscape Directory)...
    - Maybe some of the previous steps is not correct....
    - Is RFC Destination = PI7 is correct in step #5?
    - Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
    - I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
    Please any idea will be very helpful.......
    Thank you!
    Best regards,
    Marta.

  • Applications are using too much data

    my iphone 5 fatching too much data on every application like facebook , whats app etc...

    Thanks for sharing.  I'll share something with you.  My Sony TV has a great picture.

  • Extract Range of Data / Waveform Zoom

    I have an NRF recording file with several channels. What I need to do is visualize the data and then extract a small part of the waveforms into a TDM or Matlab file. I actually managed to get all this done in DIAdem, but in a most cumbersome way:
    1) Import NRF file into the Data Portal using the DataPlugin
    2) Convert all signal channels to Waveform channels (using the function in the ANALYSIS module)
    3) Display the waveforms in the VIEW module
    4) Zoom downto the sample level in order to figure out where to start and stop the extraction
    5) Write down the start/stop x-coordinates (i.e. XStart, XEnd)
    6) Switch to the ANALYSIS module and generate a numeric channel with "First value" = Xstart, "Last value" = XEnd and "No. of values" = (XEnd - XStart)/SampleTime
    7) Use "Linear Mapping..." to extract the desired data
    8) Convert the extracted data to a waveform channel
    9) Export data to desired file format
    Now for my questions:
    * I'm using DIAdem 10.0 (Base Edition) and would like to know if there is not a much simpler way of getting this job done, i.e. selecting two points on a waveform, click one button and get the data between those points as a new waveform in the Data Portal (ideally for several waveforms in parallel)
    * Isn't there any way of zooming out one step in the waveform viewer? I only found zoom on/off which is a rather crude way for navigating)
    * Are there any news regarding the topic in the thread "Selecting a range of data from a file" (last posts date back to February 2005)
    Any help is greatly appreciated. Thanks

    Hi,
    * How can I run a VBS script with my Base Edition: the whole Script feature is disabled, but I was under the impression that I can run scripts (just not edit/debug)
    ... with an Link on the Desktop from your DIAdem. In Properties of this Link, you can set the Parameter:
    "DIAdem.exe" "/cScriptStart('MyScript')"
    ... with the start Script in every Module in DIAdem. Have a look at the Screenshot.
    * Isn't there any way of zooming out one step in the waveform viewer? I only found zoom on/off which is a rather crude way for navigating
    ... I´m sorry Zoom out isn´t anywhere! But you can make it like the second picture. With the upper Graph, you an control what you see in the second Graph. Zoom In/Out, no Problem
    * Also how can I precisely (down to the sample level) place the two band cursors? Using the different zoom modes I manage to do it for one of the two cursors, but not the other one.
    Sorry, I don´t understand your question! Perhaps you can precisely set you Cursor with the Coordinat Window? Have a look!
    Best regards
    Alex
    Attachments:
    Start Script.gif ‏6 KB
    Zoom.gif ‏55 KB

Maybe you are looking for