Initialise to standard and error1073 in applicatio​n

Hallo,
I have an application with each, a string control and a string indicator.
While running I want to clear these with a method node and the "Initialize
to standard" method.
In development mode this works fine. But if I compile an application, these
two method nodes fail and produce an error 1073 and some weird descriptions
which are not useful to me.
What's the trick. Can't these methods used outside development mode?
Thanks
Oliver Friedrich

Hi,
Yeah I fell for this one, follow link:
http://exchange.ni.com/servlet/ProcessRequest?RHIV​EID=101&RPAGEID=135&HOID=5065000000080000005538000​0&USEARCHCONTEXT_CATEGORY_0=_8_&USEARCHCONTEXT_CAT​EGORY_S=0&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Never did see a reason why this doesnt work as expected.
I had to change my code initialising the control /indicator with the Value node.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • Standard and customized reports

    Experts,
    I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
    OPEN PURCHASE ORDER REPORT
    OPEN REQUISITION REPORT
    OPEN RFQ REPORT
    PURCHASE ORDER CONFIRMATION REPORT
    STOCK ITEMS RE-ORDER
    STOCK ITEMS RESERVED
    STOCK ITEMS ABOVE STOCK MAX
    STOCK ITEMS BELOW STOCK MIN
    STOCK ITEMS DETAILS
    STOCK ITEMS INVENTORY CONTROL
    STOCK ITEMS LIST BY NUMBER
    STOCK ITEMS MOST USED
    STOCK ITEMS NOT USED
    STOCK ITEMS ORDER BY COST
    STOCK ITEMS ORDER BY LOCATION
    STOCK ITEMS ORDER BY VENDOR
    STOCK ITEMS OVER RESERVED
    STOCK ITEMS STATUS
    STOCK ITEMS VALUE
    VENDOR PERFORMANCE REPORT
    Regards,

    Hi,
    SAP Std. Reports     Description                                                                          Z-Dev
    ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT     
    ME5A                          OPEN REQUISITION REPORT     
    ME4N / ME4M / ME4L     OPEN RFQ REPORT     
    ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT     
    MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
    MB24 / MB25                          STOCK ITEMS RESERVED     
                              STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                              STOCK ITEMS BELOW STOCK MIN                                ABAP Report
    MMBE / MB52     STOCK ITEMS DETAILS     
    MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL     
    MMBE / MB52     STOCK ITEMS LIST BY NUMBER     
    MC46                           STOCK ITEMS MOST USED     
    MC50                           STOCK ITEMS NOT USED     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION     
    ME2L                          STOCK ITEMS ORDER BY VENDOR     
    MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
    MMBE/MB53                           STOCK ITEMS STATUS     
    MB52                           STOCK ITEMS VALUE     
    ME6H                           VENDOR PERFORMANCE REPORT     

  • Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

    Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
    The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

    try this link
    *https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

  • I have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

    i have acrobat standard and it will not allow me to edit.. every file i go to open it says "there is a active file open and must close in acrobat" other times it says account cannot be validated after I have already paid for it.. please advise

    Hi Timothy,
    The account cannot be validated error was due to a glitch on our activation server that has been fixed now.
    Please try using acrobat now and check if you are still facing the problem.
    Regards,
    Rave

  • About a year ago I purchased the student addition of the Adobe Creative suite 6 Design Standard and just recently purchased an additional computer for my home. Can I use the same disc that I previously purchased to download the program?

    About a year ago I purchased the student addition of the Adobe Creative suite 6 Design Standard and just recently purchased an additional computer for my home. Can I use the same disc that I previously purchased to download the program?

    Yes, as long as the machine meets the system requirements for the software you can install and activate it.  Your license allows you to have the software installed and activated on two machines.

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • How to find all those list of SAP standard and custom objects that are changed from a specific point of time

    Hi all,
    Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
    Is there any function module or any table where this change log is maintained.?
    I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
    Thanks in advance

    Hi RK v ,
    I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
    Have a look into table E070 and E071 .
    Regards ,
    Yogendra Bhaskar

  • Acrobat 8 Standard and Acrobat X Pro unable to install

    Hello,
    I have purchased Acrobat 8 Standard and Acrobat X Pro, and have both serial numbers. 
    I am unable to install either in my new computer. 
    I do not have a disc for Acorbat 8, but do have one for Acrobat X Pro. 
    I have tried downloading from Download and Installation Help.  I received the following error message:  "Setup has detected that you already have a more functional product installed.  Setup will now terminate." 
    I have uninstalled and re-installed 8. 
    I have used the Adobe Reader and Acrobat Cleaner. 
    Nothing has worked so far. 
    I received an email from Adobe Help & Support. I replied in order to set up an appointment, but never received a response. 
    It was suggested in one of the last communications in another forum, that I post a new discussion in the Acrobat Installation & Update Issues forum. 
    Please help.

    Hi Elizabeth ,
    It is not recommended to download and run two Acrobat versions on the same machine as it can lead to some conflicts between the two and as well as with the activation server .
    Try and use single software on one machine .
    Please use the Adobe Cleaner tool to uninstall the software .Here is the link for the same .
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Once uninstalled ,try downloading the software once again and see if that works for you .Make sure you disable all the third party software while the installation is in progress to avoid any interruption.
    Or you could refer the following to download Acrobat X Pro .Acrobat 8 standard ,as it is an older version would not be available now .
    You could try and download Acrobat X referring the following KB document and serialize by typing the serial number mentioned on the disk .
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards
    Sukrit Dhingra

  • Acrobat 8 Standard and Photoshop Elements

    I need to download my Acrobat 8 Standard and Photoshop Elements on my new computer. Adobe downloads will not let me do this and tech support says they cannot help because of the age of the products?

    You needed to keep them when you first downloaded. It's vital to keep downloads you pay for, and to burn them to CD so you don't lose them if your disk fails. It is likely to be too late to get these now, but let's see if someone has any info that might help. Good luck!

  • I am retired.  In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment.  I recently spent a fortune to migrate to  Apple.  I realize that my licenses are not recognized by Adobe. I am desperate

    I am retired.  In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment.  I recently spent a fortune to migrate to  Apple.  I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still,  I need the tools for all those little things I do for enjoyment. What can be done?

    The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
    If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

  • What's the difference between Standard and Enterprise?

    Hi,
    I want to download oracle 8i for linux,and I don't know
    what's the difference between the standard and enterprise
    version. Can anyone give me the answer? Thanks a lot.
    forfun
    null

    forfun (guest) wrote:
    : Hi,
    : I want to download oracle 8i for linux,and I don't know
    : what's the difference between the standard and enterprise
    : version. Can anyone give me the answer? Thanks a lot.
    : forfun
    Enterprise vs Standard : technical view
    If you install Enterprise you must:
    - install Enterprise whith all the modules
    - apply the patch 8.1.5.0.1
    (if all the modules weren't installed, the patch fails because
    he tries to relink non installed products)
    If you install Stardard you must:
    - install Standard
    - no patch required !
    Enterprise vs Standard : package
    Standard is good enougth for a lot of purposes. It includes
    TextRetrival, Java inside the database, etc.
    With Enterprise, you can by additional products like Spatial
    data, Time Series, etc.
    Hope this helps,
    Thanks to Yann Doussot for these informations
    Gilles
    http://perso.club-internet.fr/gbriard
    null

  • Standard and Detailed Profitability

    Hello Gurus
    I am a newbie in HPCM.
    I am aware that there are standard and detailed HPCM available,
    standard HPCM uses Essbase while detailed HPCM uses a relational database.
    What are the Pros and Cons and major differences for these two?
    Thank you very much for your time!
    Regards
    K

    Table type
    The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
    Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
    Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be UNIQUE or NON-UNIQUE. Standard tables and sorted tables are known generically as index tables.
    Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
    http://help.sap.com/saphelp_erp2005/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/frameset.htm
    Please award points

  • Standard and sys audit to syslog

    Hello,
    I have question about enabling auditing to syslog.
    Is it possible to configure standard and sys auditing to local syslog in linux environment?
    I have read that from version 10.2 it is possible to add AUDIT_SYSLOG_LEVEL parameter to init.ora to send audit trail to syslog. But I need to have both auditings: standard auditing and sys operations auditing on a remote host using syslog.
    Regards
    Dominik

    Hi,
    I hope that the following document helps: http://www.springerlink.com/index/ut68j3652k06747j.pdf
    Regards,
    Naveed.

  • Standard and Pro versions compatible with Windows 7

    Hello
    I am looking for a list of Adobe Acrobat Standard and Adobe Acrobat Pro that are compatible with Windows 7. We are upgrading over 1000 computers to Windows 7 and we have many different versions of Adobe Acrobat writer Stndard and Pro.
    Thanks

    There are also issues with 32 vs 64-bit systems. The latter requires updating your version in general. Generally the initial releases have not worked in the 54-bit environment. There are many driver issues with 64-bit systems and probably should look carefully if 64-bits are needed. The 64-bit system is useful if you are computationally focused, but may not be much of an advantage in standard office environments. Just be careful. If you are installing OFFICE 2010, then you need AAX for PDF Maker compatibility -- prior versions of Acrobat only allow printing from the OFFICE 2010 suite. Some folks have been successful with AA8 on 32-bit Win7 (I have only seen 1 post that would suggest success with 64-bit Win7). Prior versions of Acrobat can be made to work on 32-bit Win7 systems, but require work arounds (i.e., the AcroTray tool that automates the conversion to PDF process fails in Win7). The 64-bit system will probably fail for most of the earlier versions in such cases.
    Realize that you may have to deal with Win8 shortly that has it's own issues.

  • Standard and Moving Average Price in Material Master

    Hello,
    Can any one please tell the basic difference between Standard and Moving Average price? both the cases how the Material Price is calculated?
    And please provide the accounting entry's also.
    Thanks

    Dear S McIntosh,
    You may check URL below that explain the difference between MAP and Standard price.
    http://help.sap.com/saphelp_47x200/helpdata/EN/47/60ff0749f011d1894c0000e829fbbd/frameset.htm
    Regards,
    ian Wong

Maybe you are looking for

  • Reinstalling Snow Leopard from Mountain Lion

    In another thread, I was getting help with cloning and told to purchase a new external drive to do so.  When I went to the Apple store today to purchase an external drive, he actually talked me out of it.  I told him my goal was that if I tried Mount

  • ORA-00339: archived log does not contain any redo

    Hi All, recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side, after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's i

  • Joining Issue

    Hi , I have 4 tables , Locations , Countries , Regions , Employees . In which EMPLOYEES is the fact table , and in physical i have joined them ...... Countries----->Regions------>Locations------>Employees Countries(Dimension) is not directly joined t

  • On ffox4 where is padlock icon that denotes secure website

    in firefox 3 the padlock icon in lower right hand corner of screen indicated an https web page. in firefox 4 this icon is missing-at least in my installation. is there a way to get this back in ff4?

  • Network disconnects when using youtube on ipad air

    network disconnects and turns it self off when using youtube app on ipad air