Initialization cannot be deleted in source system

Hi All,
   While doing an Init Load for the first time, the load failed sinc there was a dump in the source R3 system.
   Then I corrected the error (a CMOD coding error) in R3 and tested it in RSA3. The simulation worked fine.
   Now I am trying to do a second INIT for which I need to delete the first failed INIT (from Scheduler->Initialization options for this source->Delete).
    It says "<b>Initialization for Data Source 0CA_TS_IS_1 Can Not Be Deleted in Source System...There was a dump in source system...Check the short dumps in the source system (/nst22 and /nsm21)...</b>."
   Please suggest how to correct this.
   Any help will be greatly appreciated.
Thanks
Vishno

Anil,
Firstly thanks for ur reply.
As per your suggestions:
1. I made it red and tried to delete from the Info pkg screen but it didnt allow.
2. Then I tried to delete from RSA7. It dumped.
3. So I deleted the two entries in two tables ROOSPRMSC & RSSDLINIT
in R3 and .
4. I recreated, replicated the Datasource.
5. But now on trying to open a Info Pkg its dumping (Message type X). It also doesnt allow to create one.
Our BW DEV box is BW 700 Level 010 SupPack KW70010
I tried OSS notes 852443, 888677 and 872278 but didnt allow me to implement.
Please suggest.
Thanks
Vishno

Similar Messages

Deleting a Source System in BW Prod

Hi Guys,
I am trying to delete the assignment of R/3 Production as a Source system in BW Prod but the system is not letting me- informing that:
Package ZBWD does not exist- choos display object or cancel.
The reason I am doing this is at present the source system is assigned to Infoobject 0WBS_ELEMT but I want to assign the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT datasources to the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT InfoSources. I would like to un-assign this datasource from 0WBS_ELEMT and assign to the InfoSources stated above.
I am trying to bring in WBS Element master data but found in Dev when I bring it in through the infoSources it is available in BW but through the 0WBS_ELEMT infoObject there is no data in the masterdata tables.
How can I delete this source system assignment in BW Prod?
Thanks
Depesh

hi Depesh,
i think system won't let you delete source system assignment in prod if it's closed for modification
(transaction scc4), if you really need to do this directly in prod, please ask basis open awhile,
have you tried delete the source system assignment in dev and transport to prod ?
regarding package zbwd not exist, check in prod if package zbwd exist,
transaction se80, choose 'package', type in zbwd,
it will display the package or ask to create new if not exist. transport package zbwd from bw dev if it's not exist in prod.
hope this helps.

How to delete a source system in BW?

Hello All!
Can anone please inform me about the procedure to delete a source system or inform me in which document i can find this information. Actually i wish to assing my newly installed BW3.5 system to a new logical system (i.e) its currently assigned to some other logical system where it has ME as default source system. to change the logical system we need to delete all the source systems in the old logical syste. So please explaing me how to delete the source system Myself(current BWsystem). there is no data and no data sources existing in the system its abosolutly fresh.
Thanking you for help in advance
with regards
Ashwin Kumar Gadi

Hello Roberto!
Thanks for ur response. But there bo such delete option available under the context menu for the source system for the Myself source(current BW). only change buton appears but when we click that it say changes are no posible. Is the any other way to delete it manually.
with regards
Ashwin

Deletion of source system after an upgrade : consequences ?

Hello,
I'm a sap basis guy.
We have a SAP BI 701 sytem mapped to our 4.7 Non Unicode source system.
I have now perfromed the unicode migration and upgrade to ECC6 of the source system on another server.
It means now, that I have two sourtce systems with exactly the same SID, and logical name.
Sicne the BI connexion in RSA1, is based on the logical system name , I have no ther choice than delete the old
source system, and recreate it with the same logical name but different connexion parameters (hosts, ...) and differentversion (
I have talked with the BI team, but thnigs are quite unclear about the consequences of deleting a source system in RSA :
Do all Transformations/ Transfer Rules between DataSources and targets are deleted ?
Does it mean that they have to be manually recreated after the new source system has been recreated ?
Is there any workaround ?
Thank you in advance for your help.
Regards.

Hello,
If you do not save the source system dependent objects to a transport request before you delete the connection then the objects will be lost , you can avoid this by saving the objects to a transport request and then release the transport before you delete the connection and import it in the new system, the steps in general are below:
RSA1
Transport Connection
Button 'Collection mode' set to 'start manual collection'
Press 'Source system assignment' button (it's the one left of the
'Request BEx' button)
Select the source systems you want to save the transfer rules for
Continue
Button 'Grouping' set to 'Save for system copy'
At the left border click on 'Object Types'
Extend tree 'Source system' LSYS
Double click on 'Select objects'
Select the source systems you want to collect objects for
the source system is now displayed in the right box
Press collecting button ('gather dependent objects')
this may take a while
Right click on the root of the tree and select
Transport all below
Expand the whole tree and check if there isn't an object which is locked
by an other open transport request !!
(the column 'Transport request' has to be empty (BEFORE deleting the corresponding source system
connection!)
Best Regards,
Des

Refresh of BW System without deleting the source system

Hello experts
I want to know, is it possible to refresh BW system without deleting the source system.
That means I just do the renaming via BDLS and reconnect.
If I do so, do I have a post refresh activities.
According to OSS note 886102 and 184447, there are 3 scenarios:
Scenario A: You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group).
Scenario B: You want to copy a single BW system of the group, the sourcesystem is not copied.
Scenario C: You want to replace a single sourcesystem of a BW-system with another system using a database or client copy (Example: Refresh of the OLTP consolidation system by a copy of the OLTP production system). The BW system is not copied
Assuming I use Scenario A, can I refresh BW system without deleting the source system.

Hi:
The primary source of information is the how to paper on this topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
YOu are correct, you can refreh the BI system without deleting the source system.
Thanks for any points you assign (after all, I wrote the paper!).
Best Regards -
Ron Silberstein
SAP

Deletion of Source system

Hello,
I need help in deleting any links that exist for an old R3 system. We have migrated our source R3 system which was called SP1 to another system called SP2. Now we have datasources, DTP and update rules pertaining to the old system that we would like to delete. I tested out an option to delete the source system in the workbench by clicking under the Source system , choosing the one I wished to delete and right clicking on that and choosing Delete. I got a warning saying that its not possible to delete because the RFC connections are no longer available, which is true. I chose Ignore in the message window that popped up and that led to all the datasources, DTP and infopackages getting deleted. This seems too good to be true that we got rid of all links to the old system . What I am wondering is whether this method causes some other important data to vanish as well. Is there also a better way to delete all links to the old system.
Regards,
Jaya

Hi Jaya
As you said there is no connectivity with the source system, then you are no more using the Datasources from that source system.
Ensure that you are not using the datasources in your regulary used Infosources.
If you are using then they me be set to inactive.
As you said youa re not at all using that source system you can delete that.
Regards
PBI

Deleting the Source System

Hi All,
Can Anyone the consequences on deleting the source system in BI and steps to re-build once again, as i need to take up the activity. Generally what can be issues that crop up when deletion takes place..
<removed by moderator>
Regards,
Madhav
Edited by: Siegfried Szameitat on Dec 12, 2008 11:28 AM

Dear Linturi,
believe you trying to delete the current R/3 source system and trying for SAP BI my self source system right?
If yes
We can very well dete the source system
The impact would be in th efollowing ways
You will loose entire datasources,transfer rules and PSA related to that particular source system and it will be Major impcat on you Bi system which is not at all preferable untill unless you are really no more use of the R/3 source system and its configured with any of the bi pass clients.
Coming to BI Myself souce system : Which is purely realted to the DATA MART Loadings and its also a similar like R/3 source system connection you have to give ALEREMOTE passwords and serve ips.
Hope this helps u...
Best Regards,
VVenkat..

Deleting a Source System Connection

Hi all,
We made some updates to a QA source system and when we try to do a 'activate and replicate datasources', errors are being thrown out. So, we decided to delete the connection and recreate the connection. I have a few questions:
1) If I right click on the source system in BI and click delete, it is prompting for a transport request to delete transfer structures. What are the steps to follow in deleting the source system? How will I be able to rebuild the transfer structures?
2) I deleted a couple of transfer structures. Can I roll it back? If yes, how
Greatly appreciate your help.
Anita.

instead try to trouble shoot the issue with the source system creation.
i don't beileve you can easily recover a deleted transfer str / rule without recovering from a backup or transporting it again from dev, once the sourcesystem issue is resolved
i believe this source system definition has been there for a while therefore just deleting it outright is not recommended for a lot of reasons,,,,,,,

DELETE OLD SOURCE SYSTEM IN BW

Hello.
We have one source system created a few years ago but source system physically doesn´t exits.
I tried to delete it in RSA1, but we got many errors causes there´s not any system whith this physicall and logical name.
I can execute function RSAP_BIW_DISCONNECT and disconnect it, but I have a lot of entries of that system in tables like RSISOSMAP. I think that we have many transfer rules and PSA tables with this system
Are there any procedure to delete an old source system manually?
Kind regards.
Marta

Thank you Manga.
But I have a question...
If I execute function, what happens with transfer rules and PSA tables?
We want to clean about this old source system data.
Thank you

How to Delete a Source System from BW System

Dear All,
I have a request to delete a UDC based source system from a BW system. Can you please let me know the steps to be followed to delete a UDC source system.
It would be helpful if you provide steps to delete a SAP Source system also from a BW system.
If there are any such documents for both the cases, please provide me the link.
Thanks to all.
Regards,
Karthik
Please search the forum before posting a thread
Edited by: Pravender on Mar 11, 2011 6:19 PM

Hi,
      Go to RSA1 T-code
      Click on source System on Left window
      select the Source System
      right click on it and Delete.
      click yes if you want to delete the PSA table as well
Best Regards
Obaid

What 's result of deleting a source system?

what happed if I delete source system?
What's the difference between spurce system

Hi Shen Peng
I believe you trying to delete the current R/3 source system and trying for SAP BI my self source system right?
If yes
We can very well dete the source system
The impact would be in th efollowing ways
-- You will loose entire datasources,transfer rules and PSA related to that particular source system and it will be Major impcat on you Bi system which is not at all preferable untill unless you are really no more use of the R/3 source system and its configured with any of the bi pass clients.
Coming to BI Myself souce system : Which is purely realted to the DATA MART Loadings and its also a similar like R/3 source system connection you have to give ALEREMOTE passwords and serve ips.
Hope its help you...!
Cheers
K M R
Assigning points is the only way of saying thanx in SDN***
>
Shen Peng wrote:
> There are two client, 800 is the BW system, has lots of data, 810 is ERP system, not too many data.
> If I connect to the BW source system to BW, it is the same way with SAP source system?
>
> What's the difference between a SAP source system and BW system?

How to delete old source system assignment and assign new source system.

Hi Experts,
I have bunch of datasource which are pointing to source system A (when I see it in RSA1). Recently all the datasources which are in source system A has been moved to source system B.
Now I have replicated all the datasources from the source system B. But in RSA1, still I am seeing the datasources which are pointing to sourcesytem A. I want this to be pointed to source system B.
Is there a way to do this?. I have searched in forum and found that this ned to be done manually. Do i need to do it for all the datflows? Is there any thing we can do when running BDLS?.
Please let me know if you need more inputs.
Thanks a lot for you suggessions. Eagerly waiting for valuable suggessions.
Thanks and Regards,
Saravanan Payani.

Hi Anindya,
Thanks for your quick reply. I want to keep the data what ever there in the cube as of now. From now on I want to extract data from new source system.
Basis team ran the BDLS but i don't see any changes. Still my datasources are pointing to OLD source system.
Background : I have an infocube for which the datasourec is ZCRM_MKT_001, which is available at source system IRDCLNT001. Now the above datasource has been moved to new source system IRXCLNT001. As my datasource is moved to new source system, I want the data from the new source system.
My issue : But when i expand the data flow of the infocube in RSA1to the lowest node, against the datasource i can still see the source system as IRDCLNT001 (which is old) under 'Object Information' column. I want this to be pointed to my new source system that is IRXCLNT001.
Is there any way to arrive at this?.
Thanks for your time on this.
Thanks and Regards,
Saravanan Payani.

Source System Deleted

I am running 2004s SP 10 and have recently delete a source system that no longer connects to an r/3 client.
The problem is that I cannot access transport connection and BI Content tabs in RSA1 because I get an error telling me that my deleted source system cannot be found. I have also noticed there are still some transformations and datasources that still exist and cannot be deleted.
Can someone tell me how to delete these objects or suggest how I can solve this problem.
Thanks

Hi
here is function module by executing this u can dissconnect the source sytem
RSAP_BIW_DISCONNECT
and also using this u can reconnect also
RSAP_BIW_CONNECT
Hope this will help u
Regards,
M Kalpana

Error deleting source system with error message: "incorrect input for....."

Hi,
I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
"incorrect input for activating transported shadow IPacks"
Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
Please let me know what is the caused of the error and how to solve the problem.
Thanks for your kind help.
Regards,
Mark

Hi Mark,
Which version of BW are you in?
check this thread and also the note 709581
Error Deleting Source system connection
Thanks,
Raj

How to delete source system in BI system

Dear Experts ,
recently we finished client copy in BI production system to quality system,
now we are facing problem with source system connections in bI system
in RSA1 APO production system's source system is comes to BI quality system now i need to delete that APO source system in BI quality system ..please let me the process how can i delete source in BI quality
can i delete it as below
log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
or we have any other process to delete it.
Regards

Hi Swathimatta,
Apart from the two ways to delete the source system:
1.- log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
2.- Execcuting the FM 'RSAP_BIW_DISCONNECT.
If you cannot delete the source system:
Use fuction module RSAR_LOGICAL_SYSTEM_DELETE to delete
the source system:
1 - Go to SE37.
2 - Run fuction module RSAR_LOGICAL_SYSTEM_DELETE.
3 - Fill with the parameters as mentioned below:
      I_LOGSYS          = FUENTE
      I_FORCE_DELETE    = X
      I_NO_TRANSPORT    =
      I_NO_AUTHORITY    =
Or follow the recommendations from note 140276, Solution 2:
"You cannot delete the source system. Two cases have to be distinguished:
    o The source system still exists.
       Switch to Transaction SM59. Find the destination which has the
       same name as the logical system of the source system from field
       SLOGSYS in table RSBASIDOC (see above).
       - Such a destination does not exist in Transaction SM59. In this
          case, you have to create the destination to the source system.
          Name the destination equal the entry in SLOGSYS from above.
          Then return to the Administrator Workbench and repeat the
          deletion.
       - The entry exists but a remote login is not possible. Correct
          the communication parameters.
       - Everything works. Change to Transaction SE37, function module
          RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS =
          <log. name of the source system>, I_FORCE_DELETE = 'X'.
    o The source system no longer exists or was replaced with another
       source system with the same IP address.
       Proceed as described in the first case but make sure, that the
       field 'Target host' contains a not existing server in the
       maintenance screen of the destination (Transaction SM59). If
       necessary, change an existing entry. Later when you delete, the
       system asks you whether you want to delete, although the source
       system is not available. Select 'Ignore'. "
I hope it can help you.
Regards,
Fran.

Initialization cannot be deleted in source system

Similar Messages

Maybe you are looking for