Initialization Error: Failed to read POST response

Guys,
I need help, I am cloning ,y PROD DB to a test environment, I did first using my test database and it worked, but running with my PROD failed.
I am using OEMGrid Control, Wind2003, DBOracle9i, I am trying to connect using OEMGC and when start trasnfering "One datafile" via HTTP (I guess is the temp file) fialed with the error: Initialization Error: Failed to read POST response.
Please does anybody have a little idea what could happen?...please I need some guide...I will appreciate so much....Thanks
I tried looking for the error I the only I got was the follwoing:...It looks like a patch
Subject: Oracle Enterprise Manager Management Agent Patch Set Notes for Windows 10g Release 2 (10.2.0.2)
Doc ID: Note:375161.1 Type: README
Last Revision Date: 01-AUG-2006 Status: ARCHIVED
Skip Headers
Oracle® Enterprise Manager Management Agent Patch Set Notes for Windows
10g Release 2 (10.2.0.2)
B31109-01

What is the size of the data file which fails during transfer? I could find one reference on Metalink where the large file size (6GB) resulted in this error but that is in Oracle 10g.

Similar Messages

"failed to read POST response" when adding a standby database

Hello everybody,
I've got a problem ...
I try to create a standby db using the Oracle Grid Manager. When running the job, it is broken in step "httpOneDatafile" with message "failed to read POST response".
In metalink, I found the one-off patch 6670069. As it is only applicable to Oracle agent 10.2.0.4, I've de-installed the agent 10.2.0.5 and tried to install patch 6670069 to this version, but all I get is this error:
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 6670069: Required component(s) missing : [ oracle.sysman.top.agent, 10.2.0.4.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
I tried with different ORACLE_HOMEs (<path_to_db_home> or <agent_home>) and different PATH (<path_to_db_home>/bin or <agent_home>/bin) variables, but anytime, I get the same message when trying to patch the agent.
Does someone have an idea, what's going wrong?
Environment:
Primary Database : 10.2.0.4 on HPUX 64 Itanium
Standby DB: 10.2.0.4 on HPUX 64 PA-Risc (this combination is ok as we used it in a former config with two 10.2.0.2 DBs for the last 2 years...)
Oracle agents: 10.2.0.3 up to 10.2.0.5
As I'm trying for 1 week now, any (ANY!) idea is very welcome...
Regards,
Roland

JVM is probably not the correct forum for this post. JVM is for issues related to the RDBMS resident Oracle proprietary java VM, which isn't involved in what you are doing here.

RH7 Error: Failed to read from log... Failed to generate WebHelp Pro

Installed RH9 trial on Windows XP PC. Then, generated an existing project using RH7 to a new C: drive directory location on the PC using the same name. Renamed the project files in that C:drive directory to a test name and opened the project's .xpj file in RH9. It converted cleanly.
Now, when I go to generate the RH7 original project from the original server directory, I receive:
Error: Failed to read from log (file name) .log.... Internal error encountered, Failed to generate WebHelp Pro.
Does the log file keep track of the previous generation (time stamp,etc), since this RH7 generation has a skip in it for the one generated to the C:drive? I've compared the log files from each run (.txt files) and don't see a difference. I even copied the log file from the C:drive run to the Server directory. No luck. Any ideas?

Hi John,
Thanks for the prompt response. I am trying to evaluate RH9 / RH Server 9.
When I generate RH7 projects, I’ve always put the server (RH7 Server) directory reference in the ‘Output Folder and Start Page’ field. This directory reference is where the compiled output ends up right? In my case, it’s in that field as:
PBSrobohelp\D$\RoboHelp <file:///
PBSrobohelp\D$\RoboHelp> Web Files\PBS Unit Processes Manual. I’m not aware of a C:Drive local copy of the files. Doesn’t it go out to the server output for the .log file in question?
For the test, I took an existing project in RH7 and replaced this server reference with a C:Drive local hard drive directory reference and ran the output to it. Then I went to the C:Drive directory and changed the project name, because there doesn’t appear to be a way to do a ‘save as’ on a project – RH7 wants to keep that name badly. I then, shutdown RH7 and started RH9. I opened the .xpj file from the new test project copy. It recognized that it was from an older release and it converted the test copy to RH9. It converted cleanly with about 2 inconsequential document warnings but did not create a TOC. I looked it over and saved it in RH9 – it was already my test name.
The original RH7 project opens fine in RH7 and the Test RH9 project opens fine in RH9. So I think I have a good test copy. It’s just that when I point the RH7 original to the Server Output folder (which has its files) it gets the error on generation.
We are evaluating RH Server 9 but I haven’t attempted to publish anything to it yet. I’ve stayed purely on my desktop.
Hope this clears it up.
Jim
Jim Dages
Business Professional Technician III
University of Colorado, Payroll & Benefit Services
1800 Grant St, Suite 400
Denver, CO 80203
t. 303-860-4230
f. 303-860-4299
   Please consider the environment before printing this e-mail.
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner. Thank you.

Error: Failed to get a response after sending the message

This is another one of those errors I only get some of the time with a specific script. I can't figure a rhyme or reason for it. The full error is:
Failed to get a response after sending the message: <Message name="PageComplete"><Parameter WindowIndex="0"></Parameter><Parameter PassIfPageAlreadyComplete="false"></Parameter></Message>.
It's triggering at a WaitForPage() method in the script. The script is executing from the OTM server which is Windows Server 2008 R2 and only runs for OTM. No roles or features (other than SMTP). IE-ESC is off for all users. The script runs with -delayPercentage 1.
The script runs fine from within OpenScript workbench every time. The script does work when executed from OTM, however it will sometimes fail. When I run the scripts back to back the failure rate is about 50%. Same error every time....
Any help, insight, and ideas would be greatly appreciated.
Edited by: Colyn1337 on Mar 14, 2013 11:20 AM

Also, some time it throw slightly different error like:
"/web:window[@index='0']/web:document[@index='2']/web:form[@index='1']/web:inp
ut_text[@id='saw_*' or @index='1']" failed to respond to action: <Message
name="Click"><Parameter WindowIndex="0"></Parameter><Parameter
DocumentIndex="2"></Parameter><Parameter index="1"></Parameter><Parameter
tag="INPUT"></Parameter><Parameter type="text"></Parameter></Message>.
Please help to triage.

Compilation error: Failed to read wsdl

Dear Experts,
I am getting issue during deployment of BPEL process. I have created a BPEL process with schema named TD_Init.xsd and I get deployed. Later I have changed my xsd content in the sense I have added some more elements on the same xsd and update my process. getting compilation error as
Error: [Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Global element declaration/definition of name '{http://www.example.org}ProcessRequestElement' are duplicated at the following locations:
file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [line#: 14]
http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [line#: 14]
http://eway:8889/orabpel/default/AdvanceIssue/TD_Init.xsd [line#: 14]
There are at least two of them looking different:
file:/F:/JDeveloper/jdev/mywork/TDRequest/TDIntegration/bpel/TD_Init.xsd [difference starting at line#:23]
http://eway:8889/orabpel/default/RecommendProcess/TD_Init.xsd [difference starting at line#:23]
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).

Hi Rajesh,
Thanks. You are having this issue because you are referencing the same xsd at a time with more than one process. Ensure that you reference the schema with its logical reference and use it within you local project directly. Even, if that does not work, then make it global and so all processes can use it .
Example :
You need to copy all your schemas into <ORACLE_SOA_HOME>/bpel/system/xmllib folder and access them using the following URL:
http://<HOST NAME>:<PORT>/orabpel/xmllib/<XSD_PATH>
For Example:
http://localhost:7777/orabpel/xmllib/myxsd.xsd
Regards
A

Error: Failed To Read Phone's File System

I'm using PC Suite 7.0.8.2 on XP SP3 connected to a Nokia 6300.
I keep getting an error message when I click on Nokia Video Manager. The message states "Failed to read phone's file system. Internal error occurred". Video manager then hangs. I see it in the XP task bar but no window ever appears.
I've tried connecting the phone via Bluetooth and USB with the same message.
With no phone connected I should still be able to use Video Manager to convert videos and store them on my PC, but it still hangs (without the phone file system error message), so it looks like perhaps more of an issue with Video Manager than with my phone. It was working a few days ago.
I've tried running the PC Suite installer and selecting the repair option, but that didn't help.
Not sure what to try next. I did a search on the error message phrase in these forums but nothing turned up.
Any ideas or suggestions?

I have messed around and found some sort of solution.
What seemed to be happening was the phone was creating conflicting folders on the memory card.When anew video was created the phone created a folder named video clips and stored the new video in there.
So what I did was move all videos out of the Videos and video clips folders so that they were just on the memory card when you open it, then delete the folder named videos leaving the other video clips.
Now when you go to video manager it can read the videos.
However you may still get the error message but at least you can now transfer stuff.

Update muse and made changes to home page now getting this error message... error calling selector function: Security error:Failed to read the content document html Iframe element

Made changes on my home page and it looks great in the preview in browser, but when i upload to my server I get the attached error message. PLEASE HELP!!!

It's common for opening a locally exported website that contains Social widgets or other third party code to generate security errors because it will be loaded in the browser using file:// protocol. When a site is previewed from Muse (in Muse or in browser) or uploaded to a hosting provider it's served using http:// (or https://) protocol and the security errors don't occur.
The third party code that comes with using the Social widgets or any other widgets that rely on third party code and/or services is frequently not designed to work over file:// protocol.

Failed to read the table scslmthresh: error = 113

I'm continously getting the above error (Failed to read the table scslmthresh: error = 113) on a new sun cluster 3.2 on two T5240s with a 2540 as their storage. I've searched for this error but I cannot find any information on it. Anyone know what this is??
java[1935]: [ID 513556 daemon.warning] Failed to read the table scslmthresh: error = 113
I do have the cluster telemetry services running and a few storage resources, but nothing big yet. This error happens about every 2 hours, but the timing is not exaclty consistent.
thanks for any insight.

I figured out that this error definitely has to do with reading/writing information to the telemetry resource/data service, so I removed mine completely and re-installed it using the clsetup (option 8, then option 2). That seems to have removed the error. I'm guessing a Java patch changed something that the telemetry service didn't like.

Remote Management: "Failed to read remoting state" error

Hello,
I am facing the following error on my Windows Server 2012 Datacenter installation:
If I try to enable the Remote (Server) Management from the Server Manager UI I get the following error: "Internal Error: Failed to read remoting state. The system cannot find the file specified."
Has anyone else faced the same error? What could be the cause of this error?
Thank you in advance

Hi,
The issue which you are facing can be the result of security or authentication problems (such as attempting to manage a remote server in an untrusted domain, for example; or attempting to manage a server by using credentials that are not recognized as those
of an administrator on the remote server), or configuration problems (missing Windows PowerShell, remote management not enabled on the target server, etc.). For more information you can refer below article.
Windows Server 2012 - Server Manager
Troubleshooting Guide, Part II: Troubleshoot Manageability Status Errors in Server Manager
In addition if you want to enable Remote Management you can try to enable using command line or Windows Power Shell. Go through
this article for additional details.
To Enable through Command line & Windows Power-Shell (Run as Administrator):
Configure-SMRemoting.exe –enable
Hope it helps!
Thanks.

Failed to read the configuration file. Fresh install on windows 7

I have just downloaded and installed firefox on my windows 7 computer. No errors on the install. When I try to launch Firefox I get this dialog box. Configuration Error - Failed to read the configuration file. Please contact your system
administrator.

Check for the presence of a mozilla.cfg file in the Firefox program folder to initialize some prefs.
This also involves the presence of a .js (JScript) file, probably in "defaults\pref" folder, that specifies to process this mozilla.cfg file.
If you have .js files apart from the channel-prefs.js file, that sets app.update.channel, in the defaults\pref folder then open this file in an editor like Notepad and please post its content.
Also please post the content of the mozilla.cfg file.
There shouldn't be a mozilla.fcg file present unless you've created it yourself to initialize some prefs.
If you have this mozilla.cfg file then best is to do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Preferences_not_saved#Other_solutions

Failed to read parameter object when publish crystal report 11

Hi,
I created a dynamic parameter crystal report and while running in CR (XI) everything works fine.
Once I am trying to publish to server (infoview & business objects) I am getting error message "Failed read data from report... Reason: Failed to read parameter object"
(It works fine and was published sucesfully if I change to static parameter.)
I already try to change 'Edit right' in Business View Manager as other people suggest in other place and I still can't publish it without error.
Please help.

Re: Failed to read parameter object using Dynamic Parameter
Posted: Sep 27, 2010 9:23 PM in response to: sharonamt Edit Reply
Hi Sharon,
I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
I am not sure what to do..can you please guide me ?
Where we need to install service pack at machine which having crystal report designer or at Bo server
Regards,
Johnes

Failed to read ObjectTypes: Missing CMF Instance

Hi experts,
We are facing a problem when trying to configure authorization rules for CAF Business Objects.
As soon as we open the "Composite Application Framework Authorization Tool: CAF Authorization Tool" page it throws the following error:
failed to read ObjectTypes: java.lang.RuntimeException: Missing CMF Instance, GUID = 2e45f5c0-255c-11df-cd10-0024e8dbf4d0.
It was working fine but a few days ago it started to throw the error. As the error mentions "Missing Instance" we tried redeploying all of our CAF DCs but it didn't fix the problem.
Can anybody figure out what could be happening?
Regards,
Daniel

Hi Steffen,
We didn't find a good solution, we just undeployed and redeployed all our DCs and it worked but this is not a serious solution.
We posted several CAF issues and got no replies, it seems that not much people is using CAF or not people knows anything about this technology. As a result of this we are thinking about using another mid-layer framework for persistance and intermediate business logic.
Regards,
Daniel.

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

ERROR: Fail to parse policy requests

I noticed that the ..\sms_p01\inboxes\polreq.box\bad\ folder has accumulated 20 bad policy request files over the last three days. The ..\sms_p01\Logs\chmgr.log shows this every five minutes:
Inbox file change detected at 7/20/2012 11:46:09 AM Central Daylight Time 7/20/2012 11:46:09 AM
New policy file arrived 7/20/2012 11:46:09 AM
On primary site: process files to DB 7/20/2012 11:46:09 AM
Client Health Manager is processing *.POL files 7/20/2012 11:46:09 AM
Processing file POL2012720164690.POL 7/20/2012 11:46:09 AM
Try to bind to table v_CH_PendingPolicyRequests 7/20/2012 11:46:09 AM
Column number is 3 7/20/2012 11:46:09 AM
Successfully bind to table v_CH_PendingPolicyRequests 7/20/2012 11:46:09 AM
Begin to get policy requests body 7/20/2012 11:46:09 AM
Successfully get policy requests body 7/20/2012 11:46:09 AM
Begin to parse policy requests 7/20/2012 11:46:09 AM
ERROR: Invalid policy request data 7/20/2012 11:46:09 AM
ERROR: Fail to parse policy requests 7/20/2012 11:46:09 AM
ERROR: Fail to read from file D:\Program Files\Microsoft Configuration Manager\inboxes\polreq.box\POL2012720164690.POL 7/20/2012 11:46:09 AM
WARN: Fail to process file POL2012720164690.POL 7/20/2012 11:46:09 AM
Bad Policy request file was moved to D:\Program Files\Microsoft Configuration Manager\inboxes\polreq.box\bad\POL2012720164690.POL 7/20/2012 11:46:09 AM
Successfully executed stored procedure CH_SummarizePolicyRequests 7/20/2012 11:46:09 AM
Work completed at 7/20/2012 11:46:09 AM Central Daylight Time 7/20/2012 11:46:09 AM
Next wake up time is 7/21/2012 11:46:09 AM Central Daylight Time 7/20/2012 11:46:09 AM
The SMS_CLIENT_HEALTH component's status shows that it is healthy.
The only component that shows an unhealthy status is the SMS_DISTRIBUTION_MANAGER. The DistMgr.Log shows this for package P0100008:
Used 0 out of 3 allowed processing threads. 7/20/2012 12:37:22 PM
Starting package processing thread, thread ID = 0x1580 (5504) 7/20/2012 12:37:22 PM
Sleep 3600 seconds... 7/20/2012 12:37:22 PM
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=PSCCMA2W.theocc.com SITE=P01 PID=256 TID=5504 GMTDATE=Fri Jul 20 17:37:22.883 2012 ISTR0="P0100008" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="P0100008" 7/20/2012 12:37:22 PM
Retrying package P0100008 7/20/2012 12:37:22 PM
No action specified for the package P0100008. 7/20/2012 12:37:22 PM
Start validating package P0100008 on server ["Display=\\PSCCMA2W.theocc.com\"]MSWNET:["SMS_SITE=P01"]\\PSCCMA2W.theocc.com\... 7/20/2012 12:37:22 PM
Failed to start DP health monitoring task for package 'P0100008'. Error code: -1 7/20/2012 12:37:22 PM
Updating package info for package P0100008 7/20/2012 12:37:22 PM
Only retrying local DP update for package P0100008, no need to replicate package definition to child sites or DP info to parent site. 7/20/2012 12:37:22 PM
StoredPkgVersion (7) of package P0100008. StoredPkgVersion in database is 7. 7/20/2012 12:37:22 PM
SourceVersion (7) of package P0100008. SourceVersion in database is 7. 7/20/2012 12:37:22 PM
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=PSCCMA2W.theocc.com SITE=P01 PID=256 TID=5504 GMTDATE=Fri Jul 20 17:37:22.989 2012 ISTR0="All Security Updates " ISTR1="P0100008" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="P0100008" 7/20/2012 12:37:22 PM
Failed to process package P0100008 after 45 retries, will retry 55 more times 7/20/2012 12:37:22 PM
Exiting package processing thread. 7/20/2012 12:37:22 PM
Used 0 out of 3 allowed processing threads. 7/20/2012 12:37:28 PM
Sleep 1824 seconds... 7/20/2012 12:37:28 PM
Site P01 is the one and only site and has all of the site system roles - including DP. There is only one site server for this Primary Site. SQL is local as well. The server has been restarted to see if this would help. It didn't.
If I open one of these 'Bad' *.POL files, I can see that one GUID is not like the others. It is the same for all of the other corrupt *.POL files:

I have been having similar issues. Check if you have the EndPoint Protection client running on your site server. If you do, ensure that you have the scanning directory exceptions set.
http://blogs.technet.com/b/systemcenterpfe/archive/2012/11/29/system-center-2012-configuration-manager-antivirus-exclusions.aspx
-Ravi

Transportable Tablespace Importing - Failed to read stderr from process

Hello,
I'm using the normal EM console packaged with Oracle (10gR2) and am trying to import a tablespace on RedHat rel4.
I follow the Transport Tablespaces link on the maintenance tab and get the option of export or import and also the place to put the host credentials in. I select import, enter the credentials and click continue and am given this error: Failed to read stderr from process.
I've tried logging into EM as SYSTEM, SYS, and a DBA account I use and have used both root and the oracle account with no luck.
Searching hasn't gotten me any useful results here or in metalink so I'm stuck. What am I missing?
Thanks

Thank you thank you!
The short version is I traced it back to an error with /bin/nmo which traced back to a failure to run root.sh when upgrading to 10.2.0.3.
Thanks again!

Initialization Error: Failed to read POST response

Similar Messages

Maybe you are looking for