Initialization of encryption for the session failed.

Everytime I try to remote control into a machine that has the adaptive agent installed I get an error that states "Initialization of encryption for the session failed. Unable to proceed." I have tried to remote into both Windows XP and 7 machines with no luck. I have confirmed that the zcm certificate is a trusted certificate with the client. The server time and the client times are also in sync. Any thoughts??

Try This.........
Change AllowedTimeDiff from 10 to 120 in serverstats.xml.
Then restart your services.
This was changed from 10 to 120 in ZCM 10.3.0
I just found out it was changed back to 10 in ZCM 11, not sure why.
It's really hard to spot a 10 second TimeSynch diff.
Might be something else, but this could be it.
On 4/18/2011 1:06 PM, rhedgecorth wrote:
>
> Everytime I try to remote control into a machine that has the adaptive
> agent installed I get an error that states "Initialization of encryption
> for the session failed. Unable to proceed." I have tried to remote
> into both Windows XP and 7 machines with no luck. I have confirmed that
> the zcm certificate is a trusted certificate with the client. The
> server time and the client times are also in sync. Any thoughts??
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

  • My iphone cant sync as the session failed to start

    My Iphone 3GS wont sync with my Windows Vista Computer as the session failed to start. It has been working for some 6 months - now all of a sudden it doesnt sync
    Manny

    Thankyou, this did the trick..not sure how or even why...but all is good in my world again.

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

  • Save parameters for the session

    Hello,
    I  am using WDP CE 7.2 and wants to store parameters in the memory for the session:
    In Wdp 7.0 we used:
    IMaintainScope maint = Utils.getScopeMaintainer(WDScopeType.SERVERSESSION_SCOPE);
    maint.getScope().put(<  Some object >);
    I cant find this interface on CE 7.2, is there any other way to do the same ?
    Thanks for all the help.
    N.

    Hi trixie!
    This depends on your app. On page A U enter parameters and start execution. Result is presented on page B. How, when or why the user is on page A doesn't matter as long as he has permission. So the servlet (or whatever) between the pages does always the same: read parameters from request, do calculations, present result.
    That is how I think about it.
    Thomas.

  • Enable Trace for the Session Loggied in..

    Hi All,
    How to enable trace for the session logged in with out db bounce.
    after enable how to stop and how to get the trace file in readable format.
    Please suggest
    Thanks
    Mano

    Trace a session.
    1)Logout all sessions from the database
    2)Login to application (ensure that only one session is available)
    3)sqlplus trace/trace
    Schema which has privilege to trace the session
    4)check the sid and serial# of the session from v$session
    Use the following query
    SQL> select username,to_char(logon_time,'DD-MON-YYYY HH:MI:SS') from v$session where username='<db username>' order by logon_time;
    SQL>exec sys.dbms_system.set_sql_trace_in_session(sid,serial#,TRUE);
    5)now execute the report/transaction.
    6)once the activity is over
    SQL>exec sys.dbms_system.set_sql_trace_in_session(sid,serial,FALSE);
    7)Now the trace file will be available in the udump folder of the database ip
    Userid/password: trace/trace
    The trace wil be available in /oracle/admin/orcl/udump
    8)To find the name of the trace file use the below query
    select spid from v$process where addr=(select paddr from v$session where sid=<enter the SID>);
    This will give the name of the file
    If you are not able to identify the trace file then please remove all files in udump before starting trace.
    9) ftp the trace fil to ur local pc and issue the tkprof command
    TKPROF <trace file (like D:\orcl_8853.trc)> D:\trace.txt explain=Oracle username/password (application user) sort=(prsela,exeela,fchela)
    This will give trace file in readable format(you need to have 10g client on your pc for tkprof to work)

  • FMor Bapi to get the number of transactions in SM35 for the session name

    Hello All,
    Can you anybody give me a function module or bapi to get the number of transactions in SM35 for the session name.
    Can anybody help me out in this issue.
    Thanks

    Hello Maroz,
    Thanks for the help.But can you provide me a FM or BAPI.
    Thanks

  • Which encryption for the remote control of zenwork use?

    Which encryption for the remote control of zenwork use?

    Well, score is now 2:100, but it ain't over until the fat lady sings... :)))
    Denis
    "Marcus Breiden" <[email protected]> wrote in message
    news:fgav7820vql0$.[email protected]..
    > On Thu, 19 Apr 2007 06:42:55 GMT, Shaun Pond wrote:
    >
    >> oops, my mistake - as far as I know it's proprietary
    >
    > mark that in the calendar Denis!!
    >
    >
    > --
    >
    >
    > Marcus Breiden
    >
    > If you are asked to email me information please change -- to - in my
    > e-mail
    > address.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net

  • Iphone could not synced because the session failed to start

    My iphone when i conect it to itunes it says could not synced because the session failed to start what can i do ?

    Make sure you don't have Restrictions enabled under Settings/General. If it's enabled, you might need to restart your phone afterwards.

  • My ipod won't synch cause the session failed to start

    my ipod won't synch cause the session failed to start
    Help, please

    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • FileVault 2 encryption for the startup disk not a good idea for server?

    Hello,
    in the Mac OS X Lion help files it states the following:
    With Mac OS X Lion Server, encryption isn’t recommended for the startup disk or any disk that stores service data. If these disks are encrypted, the server can’t restart until you go to the server and enter the password at the server’s keyboard. If you use Lion Server to share an encrypted disk, the disk isn’t available to users until you enter the password at the server’s keyboard.
    Does this also apply to regular Mac OS X Lion? I would like to be able to wake up my iMac from sleep through SSH, and occasionally be able to restart the system remotely if I need to. If the above is true it seems like it would disable me from doing this.
    Thanks

    Does anyone have an answer?

  • Export for the web fails

    I am using QT 7.5.5 and keep hitting the same problem trying to export for the web - to make a movie for the iPod - I get the Error message "Export Failed - the operation could not be completed". As with other people I resort to MPeg Streamclip or Compressor but I really liked the ease that this command gave, three different size movies in a folder. Very neat but now, Fail and no explanation.
    I've tried different size movies and different types or formats too; all fail.

    I'm running QT 7.6.4, and am experiencing a QT issue I can't resolve. Have exported from FCE (settings: best quality, H.264, 720x486 4:3 NTSC). Movie plays fine in QT, but when I use the Export for Web setting, the Desktop version terminates with a"failed export process terminated unexpectedly (11)" message. (iPhone version continues w/no problems.)
    I've used these same settings many times and never had a problem. I've tried re-exporting older QT files and they still work, so I'm guessing there's something corrupted in this file...but I've re-exported it from FCE and still same issue.
    I've tried this on two different Macs...repaired permissions on both...still no love. I've trolled the web for solutions, none found.
    Any input welcome. Thanks.

  • HT3702 I know I bought something on iTunes and I got charged but my credit cards doesn't work anymore. It won't let me update or download any apps. Could I just go buy a 20$ iTunes card and will it charge that for the past failed purchase? Help please

    could I use a 20$ giftcards from iTunes for a failed purchase Instead of a new credit card? I'm not going to add a new credit card to my account. When I try to update or download a new app it tells me I have to update my billing. So I can't do anything about it because I don't have a new credit card and I will not be getting one. I just want to use a 20$ gift card so that past purchase could just take it off of my giftcards I will add. Will this work?

    Select None for payment method >  iTunes Store: Changing account information
    If None is not available > Why can’t I select None when I edit my payment information?
    Yes, you can redeem an iTunes gift card for current purchases.
    How to Redeem iTunes Gift Cards and content codes
    And you can check the balance of a redeemed card >  Account Home - Apple Store

  • Full disk encryption for the Mac ?

    I desperately require a security measure against data compromise in the event of a physical theft of one of my Macs.
    Is there some full disk encryption solution, similar to the TrueCrypt solution for Windows, that can work with a Mac? (TrueCrypt works on Mac but not its feature of full disk encryption)
    Any other ideas on reinforcing security in such physical theft incidents?
    Thanks!

    Visited http://www.macintouch.com/
    PGP Corporation is now shipping PGP Desktop 9.9 for Mac OS X, a major update of the encryption software. Highlights of this release include full support for pre-boot authentication, full support for external drives (including the sharing of Whole Disk Encrypted thumb drives between Mac and Windows clients), use of the FIPS 140-2 validated PGP SDK for cryptographic operations,
    http://www.pgp.com/

  • Encryption for the entire hard drive?  (traveling with a MacBook Pro)

    Is there a way to encrypt the entire hard drive? Maybe I am being too cautious. But I will traveling overseas for an extended period of time and I am curious to know if there is a way to secure my hard drive by encrypting it. Is there a built-in feature in the latest OS that allows me to do so? And if so, where can I get information on how to do it?
    If there is a way to encrypt the entire drive, what are some trade-offs? How does it affect future software installation, software utilization (iTunes, iPhoto, Aperture 2, etc.), and so forth?
    Thanks!

    You can use FileVault to encrypt your data. Also, in System Preferences > Security, turn on "Use secure virtual memory". There is no reason to encrypt the system or applications.

  • Reason for the loads fail

    Hi
    What are the possible reasons (Not the Errors) which cause the data load failure..??
    Regars

    Can be multiple...
    Few of them....
    1. If the exchange rates, factory calendors are not maintained...
    2. If the characteristics contain invalid characters
    3. If already a failed request exists
    4. If the datasource has changed and you havent replicated
    5. If the maximum runtime of the request is reached (if the load takes lot of time)
    6. If there are any routines which cause the load to fail... Something like divide by 0
    Its not an exhaustive list...

Maybe you are looking for