Initialization stuck at 0%

G5 dual 2.3 Ghz Xserve running 10.4.3 brand new out of the box. Xserve RAID with 7 drives all in the upper bay brand new. I have tried creating a RAID 5 array but initialization is stuck at 0%. I tried creating a RAID 0 with two of the drives and still get 0%. I have tried with RAID now enabled and disabled. I cannot see any arrays in Disk Utility.
RAID admin says the fibre channel links are up and the link lights are on.
Fibre Channel Utility is telling me the port link is down, card is in slot #2
RAID Admin 1.5 with the latest firmware and the Apple Fibre channel card in the Xserve.
Any ideas ?

OK I reseated the Fibre Channel Card and now I get some information in the Fibre Channel Utility. But the Array doesn't appear in Disk Utility ( I am formatting a 2.73TB RAID 5 with RAID now option). The system profiler does show there is communication with the XRaid.
Any ideas why the array doesn't show up in Disk Utility ?
Cheers

Similar Messages

  • LMS 4.2.3 - DCRServer stuck in state: Waiting to initialize

    Hey Forum,
    One of my installation has gone stuck ... OVA install with SP3, has run great until now ...
    I had problems with DCR, and restarted the daemons via Shell-CLI.
    Did not start up again ...
    Then reload via nomal-CLI
    Did not start up again ...
    Then I noticed this when issuing "show application status LMS"
    DCRServer             Waiting to initialize.
    and it is stuck in this status
    in daemons.log i see this and similar:
    03/Sep/2013 16:11:45:964 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:11:45:964 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:11:45:964 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    In EPMOgsAdapter:since isOGSup is not true
    03/Sep/2013 16:11:55:968 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    ms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:11:55:968 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:11:55:968 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:12:01:737 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    com.cisco.nm.trx.tis.service.TISServiceException: URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    03/Sep/2013 16:12:01:737 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    at com.cisco.nm.trx.tis.service.TISRemoteServiceFactory.getService(TISRemoteServiceFactory.java:51)
    at com.cisco.nm.trx.tis.service.TISServiceFactory.getService(TISServiceFactory.java:32)
    at com.cisco.nm.trx.tis.service.TISService.getService(TISService.java:169)
    at com.cisco.nm.trx.tis.service.TISService.<init>(TISService.java:192)
    at com.cisco.nm.trx.tis.service.TISService.<init>(TISService.java:180)
    at com.cisco.nm.trx.tis.service.TISService.getInstance(TISService.java:130)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory$InnerFactory.getInstance(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.tis(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.getMOId(Unknown Source)
    at com.cisco.nm.cesar.kernel.binding.EventBinder.processNormalizedEvent(Unknown Source)
    at com.cisco.nm.cesar.kernel.binding.EventBinder.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:662)
    03/Sep/2013 16:12:01:737 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    03/Sep/2013 16:12:02:770 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    com.cisco.nm.trx.tis.service.TISServiceException: URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    at com.cisco.nm.trx.tis.service.TISRemoteServiceFactory.getService(TISRemoteServiceFactory.java:51)
    at com.cisco.nm.trx.tis.service.TISServiceFactory.getService(TISServiceFactory.java:32)
    at com.cisco.nm.trx.tis.service.TISService.getService(TISService.java:169)
    at com.cisco.nm.trx.tis.service.TISService.<init>(TISService.java:192)
    at com.cisco.nm.trx.tis.service.TISService.<init>(TISService.java:180)
    at com.cisco.nm.trx.tis.service.TISService.getInstance(TISService.java:130)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory$InnerFactory.getInstance(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.tis(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.getMOId(Unknown Source)
    at com.cisco.nm.cesar.kernel.binding.EventBinder.processNormalizedEvent(Unknown Source)03/Sep/2013 16:12:02:770 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    In EPMOgsAdapter:since isOGSup is not true
    In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:12:05:973 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:12:05:974 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    03/Sep/2013 16:12:05:974 ERROR  ? ?  - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
    com.cisco.nm.trx.tis.service.TISServiceException: URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    at com.cisco.nm.trx.tis.service.TISRemoteServiceFactory.getService(TISRemoteServiceFactory.java:51)
    at com.cisco.nm.trx.tis.service.TISServiceFactory.getService(TISServiceFactory.java:32)
    03/Sep/2013 16:12:06:649 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    03/Sep/2013 16:12:06:649 ERROR  ? ?  - URN_NOT_FOUND : urn "TIS-1.0" : Not found !!
    .tis.service.TISService.<init>(TISService.java:180)
    at com.cisco.nm.trx.tis.service.TISService.getInstance(TISService.java:130)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory$InnerFactory.getInstance(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.tis(Unknown Source)
    at com.cisco.nm.trx.epm.providers.inventory.EpmTISInventory.getMOId(Unknown Source)
    at com.cisco.nm.cesar.kernel.binding.EventBinder.processNormalizedEvent(Unknown Source)
    at com.cisco.nm.cesar.kernel.binding.EventBinder.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:662)
    In the release note i find this:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.3/release/notes/lms4_2_3_release_notes.html
    Table 2 Open Bugs in Cisco Prime LMS 4.2.3 
    CSCuc82281
      .. DCR Server takes long time to initialize.
      ... This happens when there are lot of files in < NMSROOT>/log directory.
    So i have removed all files i  /var/adm/CSCOpx/log/ ( i only had 252 files, which is not "a lot")
    started again:
    /etc/init.d/dmgtd start
    But still same issue ...
    I am think of upgrading to SP4, but the bug is still open in SP4 aswell, so i am not sure this will fix it
    Please help
    regards
    Martin

    Hi Afroz,
    Thx for your nice post. I think I was running into the same problem after running the rmeptt.sh script at 4.2.5 Linux VA.
    I think the last file from your explanation was destroyed by ptt
    [lms4/root-ade bin]# ls -l /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    -rwxr-xr-x 1 casuser casusers 52 Jul 28 16:00 /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    [lms4/root-ade bin]# cat /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    #CSTM Configurations
    #Mon Jul 28 16:00:20 CEST 2014
    So I want to ask if you can provide an /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt for 4.2.5?
    thx, Steffen

  • JRM stuck initialize

    JRM is stuck initialize.
    pdhsow below for jrm and attached is a full pdshow and jrm log with some error in it.
    Process= jrm
    State  = Waiting to initialize.
    Pid    = 13844
    RC     = 0
    Signo  = 0
    Start  = 19/04/2010 10:28:56 AM
    Stop   = Not applicable
    Core   = Not applicable
    Info   = Application dependency start: application(s) depending on it.

    Do you have the Windows firewall or some other host-based security software enabled on this server?  If so, disable it, then reboot, and see if jrm starts up.

  • Macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no

    macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
    have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

    macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
    have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

  • Stuck on Processor Initialization

    Hi all,
    Tonight I decided to upgrade to Windows 7. I preordered almost 2 months ago so I was quite eager to install it :D I also purchased 2 more gigs of ram.
    So after I backed up PC I turned of PC, grounded myself and installed the extra 2 gigs of ram. Cleared CMOS, booted PC and it went into Windows XP  no worries. Shut down PC again, un-plugged my IDE HardDrives and all USB devices. Installed Windows 7 and all went ok, had a play around with W7 after about 30 mins I shut PC down again, grounded myself, plugged in IDE HardDrives. Switched on PC and it made a 3 second beep and repeated every 5 seconds or so. According to D-Bracket it stuck on "Memory Detection Test". So I took out the modules one by until PC started to boot. Replaced modules and it passed the memory test but then nothing else happened ie not posting and gets stuck at "Processor Initialization". I know this because the d-bracket lights are as follows 1-Red, 2-Green, 3 - Green, 4 - Red.
    There was at one point where all 4 lights on the D-Bracket were red and nothing else happened. Discovered there could be an issue with the processor. Any way I Cleared CMOS and again stuck on "Processor Initialization". I'm starting to feel that somehow I fried the processor, what you guys/gals think?
    any help appreciated.
    Cheers
    Darren
    Specs in signature

    Thanks Fredrik for quick reply.
    You reminded me, I forgot to say I did accidently remove the power to the fan for the main board but I did put it back straight away!
    Main Board power cable connected defo.
    This is what I did just now:
    1. Removed all ram.
    2. Rebooted and got the beep.
    3. Tried all memory sticks in slot one and each time D-Bracket reported "Processor Initialization"
    4. Replaced all Ram.
    5. Removed SATA HD, USB PCI Card and Graphics Card turned on PC and still getting "Processor Initialization"
    So as it stands there is nothing connected apart from fans and the system wont get past "Processor Initialization".

  • Neo2 plat stuck at processor initialization

    help,out of the blue, my k8n neo2 platinum won't boot. the diagnostic bracket is showing red,green,green,red which the book says is processor initilization. i swapped in a known working processor with no luck, swapped known working memory, jumpered the cmos reset, removed the battery, disconected the drives. nothing has worked. any ideas? the motherboard just go bad? it's been bullet proof up 'till now. any help would be appreciated.

    here are the specs
    k8n neo2 platinum w/ whatever the latest  bios is, cant remember exact version
    athlon x2 4200
    2x512 sticks of corsair pc 3200 xms memory
    ati x800xl
    aspirie 520 watt ps  28a,30a,34a,
    maxtor 140 gig hd ide
    windows xp sp2
    couldn't really find anything else in that post that helped, i can't even get in to the bios. this thing has been running flawlessly for 3 years until this situation cropped up out of the blue. i looked through the stickies but to no avail. thanks.

  • Cannot restore iPod Touch 2G - stuck on "operation 28" case #108375671

    iPod Touch 2G with 8GB, got it from Apple Store last week.
    I tried restore on 3 different computers - 2 laptops and 1 desktop, running XP SP2 and Vista. Resintalled iTunes(latest version) and Apple Mobile Device drivers a few times. Also created new accounts to restore. None of these works.
    Most of the time iTune stuck on the "Waiting for iPod..." screen. Checked the iPodUpdater.log and found the restore process stuck on "operation 28 progress -1" forever. Operations 4, 42, 5, 6, 7, 8, 9, 3, and then 4 seems to be successful. iTune was also able to read the SerialNubmer and Hardware model.
    2008-10-15 14:34:29.407 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 98
    2008-10-15 14:34:29.438 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 99
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: WinDFU::UploadData: EOF, cbRead: 3784
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 100
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: WinDFU::UploadData: ZLP
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ResetDevice: resetting...
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: success
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 8 progress -1
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 9 progress -1
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: Recovery mode succeeded
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceRemoval: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: WinAMRestore::RemoveAppleDeviceFromDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: IBOOT, DFU \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000
    2008-10-15 14:34:31.235 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceRemoval: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:31.235 iTunes.exe[2620:f38]: WinAMRestore::RemoveAppleDeviceFromDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: iTunes: Restore mode device appeared, device 0X10D09D88
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: iTunes: Creating restore mode device with usbMuxDeviceID 0X2
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: <Restore Device 01E4B520>: operation 3 progress -1
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: <Restore Device 01E4B520>: operation 4 progress -1
    2008-10-15 14:34:33.392 iTunes.exe[2620:ccc]: type query response = <CFDictionary 140BD558 [673D78F0]>{type = mutable, count = 5, capacity = 17, pairs = (
    9 : <CFString 140BEDA8 [673D78F0]>{contents = "RestoreProtocolVersion"} = <CFNumber 0D0E8BC0 [673D78F0]>{value = +11, type = kCFNumberSInt64Type}
    13 : <CFString 140A32D8 [673D78F0]>{contents = "Type"} = <CFString 140BE2B0 [673D78F0]>{contents = "com.apple.mobile.restored"}
    15 : <CFString 0D0D20B8 [673D78F0]>{contents = "SerialNumber"} = <CFString 14099A80 [673D78F0]>{contents = "removed by poster"}
    19 : <CFString 140BF028 [673D78F0]>{contents = "HardwareModel"} = <CFString 140A4C70 [673D78F0]>{contents = "N72AP"}
    20 : <CFString 0D0D19E0 [673D78F0]>{contents = "Result"} = <CFString 14098AA8 [673D78F0]>{contents = "Success"}
    2008-10-15 14:34:33.392 iTunes.exe[2620:ccc]: Supports value queries: 1
    2008-10-15 14:34:33.407 iTunes.exe[2620:17c0]: no value returned for SavedDebugInfo
    2008-10-15 14:34:33.407 iTunes.exe[2620:17c0]: device did not return saved debug info
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: type query response = <CFDictionary 1408DE98 [673D78F0]>{type = mutable, count = 5, capacity = 17, pairs = (
    9 : <CFString 0D0D0C88 [673D78F0]>{contents = "RestoreProtocolVersion"} = <CFNumber 140BDC50 [673D78F0]>{value = +11, type = kCFNumberSInt64Type}
    13 : <CFString 0D0D19C8 [673D78F0]>{contents = "Type"} = <CFString 140DE9D0 [673D78F0]>{contents = "com.apple.mobile.restored"}
    15 : <CFString 140C8550 [673D78F0]>{contents = "SerialNumber"} = <CFString 14099A80 [673D78F0]>{contents = "removed by poster"}
    19 : <CFString 140BEF50 [673D78F0]>{contents = "HardwareModel"} = <CFString 14098E40 [673D78F0]>{contents = "N72AP"}
    20 : <CFString 0CFD1B68 [673D78F0]>{contents = "Result"} = <CFString 0D0D20B8 [673D78F0]>{contents = "Success"}
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: unable to open C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPod Temporary Files\Firmware\device_map.txt: No such file or directory
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: board config = n72ap
    2008-10-15 14:34:33.438 iTunes.exe[2620:17c0]: <Restore Device 01E4B520>: operation 28 progress -1
    ....the last message repeats forever until the IPT is unplugged.
    A few times, iTunes will report an "unknown error (6)". Checked the iPodUpdater.log and found the following
    2008-10-15 14:34:29.407 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 98
    2008-10-15 14:34:29.438 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 99
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: WinDFU::UploadData: EOF, cbRead: 3784
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 7 progress 100
    2008-10-15 14:34:29.470 iTunes.exe[2620:150]: WinDFU::UploadData: ZLP
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
    2008-10-15 14:34:29.485 iTunes.exe[2620:150]: WinDFU::ResetDevice: resetting...
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: WinDFU::FinalizeDfuUpdate: success
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 8 progress -1
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: operation 9 progress -1
    2008-10-15 14:34:29.642 iTunes.exe[2620:150]: <Recovery Mode Device 140E0AA8>: Recovery mode succeeded
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceRemoval: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: WinAMRestore::RemoveAppleDeviceFromDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000
    2008-10-15 14:34:31.032 iTunes.exe[2620:f38]: IBOOT, DFU \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000
    2008-10-15 14:34:31.235 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceRemoval: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:31.235 iTunes.exe[2620:f38]: WinAMRestore::RemoveAppleDeviceFromDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: iTunes: Restore mode device appeared, device 0X10D09D88
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: iTunes: Creating restore mode device with usbMuxDeviceID 0X2
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: <Restore Device 01E4B520>: operation 3 progress -1
    2008-10-15 14:34:33.376 iTunes.exe[2620:ccc]: <Restore Device 01E4B520>: operation 4 progress -1
    2008-10-15 14:34:33.392 iTunes.exe[2620:ccc]: type query response = <CFDictionary 140BD558 [673D78F0]>{type = mutable, count = 5, capacity = 17, pairs = (
    9 : <CFString 140BEDA8 [673D78F0]>{contents = "RestoreProtocolVersion"} = <CFNumber 0D0E8BC0 [673D78F0]>{value = +11, type = kCFNumberSInt64Type}
    13 : <CFString 140A32D8 [673D78F0]>{contents = "Type"} = <CFString 140BE2B0 [673D78F0]>{contents = "com.apple.mobile.restored"}
    15 : <CFString 0D0D20B8 [673D78F0]>{contents = "SerialNumber"} = <CFString 14099A80 [673D78F0]>{contents = "removed by poster"}
    19 : <CFString 140BF028 [673D78F0]>{contents = "HardwareModel"} = <CFString 140A4C70 [673D78F0]>{contents = "N72AP"}
    20 : <CFString 0D0D19E0 [673D78F0]>{contents = "Result"} = <CFString 14098AA8 [673D78F0]>{contents = "Success"}
    2008-10-15 14:34:33.392 iTunes.exe[2620:ccc]: Supports value queries: 1
    2008-10-15 14:34:33.407 iTunes.exe[2620:17c0]: no value returned for SavedDebugInfo
    2008-10-15 14:34:33.407 iTunes.exe[2620:17c0]: device did not return saved debug info
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: type query response = <CFDictionary 1408DE98 [673D78F0]>{type = mutable, count = 5, capacity = 17, pairs = (
    9 : <CFString 0D0D0C88 [673D78F0]>{contents = "RestoreProtocolVersion"} = <CFNumber 140BDC50 [673D78F0]>{value = +11, type = kCFNumberSInt64Type}
    13 : <CFString 0D0D19C8 [673D78F0]>{contents = "Type"} = <CFString 140DE9D0 [673D78F0]>{contents = "com.apple.mobile.restored"}
    15 : <CFString 140C8550 [673D78F0]>{contents = "SerialNumber"} = <CFString 14099A80 [673D78F0]>{contents = "removed by poster"}
    19 : <CFString 140BEF50 [673D78F0]>{contents = "HardwareModel"} = <CFString 14098E40 [673D78F0]>{contents = "N72AP"}
    20 : <CFString 0CFD1B68 [673D78F0]>{contents = "Result"} = <CFString 0D0D20B8 [673D78F0]>{contents = "Success"}
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: unable to open C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPod Temporary Files\Firmware\device_map.txt: No such file or directory
    2008-10-15 14:34:33.423 iTunes.exe[2620:17c0]: board config = n72ap
    2008-10-15 14:34:33.438 iTunes.exe[2620:17c0]: <Restore Device 01E4B520>: operation 28 progress -1
    2008-10-15 14:34:33.454 iTunes.exe[2620:17c0]: <Restore Device 01E4B520>: operation 11 progress -1
    2008-10-15 14:34:33.657 iTunes.exe[2620:17c0]: device returned status 6
    2008-10-15 14:34:33.657 iTunes.exe[2620:17c0]:
    ==== device restore output ====
    lags: 00000000
    AppleBCM4325::start()
    AppleBCM4325::initHardware(): BCM4325 revision D0
    AppleSynopsysOTG2::handleUSBCableConnect cable connected, but don't have device configuration yet
    AppleSynopsysOTG2::handleUSBCableConnect cable connected, but don't have device configuration yet
    read new style signature 0x43313131 (line:281)
    [FTL:MSG] VSVFL Register [OK]
    [FTL:MSG] VFL Init [OK]
    AppleS5L8720XFMSS::_fmssInitCmdsAndCEMaskCtrl: VendorSpecific: VSCMD_ONFI2D
    AppleS5L8720XFMSS::_fmssInitCmdsAndCEMaskCtrl: VendorSpecific: VSCMD_ONFI2D
    [FTL:MSG] VFL_Open [OK]
    [FTL:MSG] YAFTL Register [OK]
    AppleMultitouchZ2SPI: detected HBPP. driver will be kept alive
    AppleMultitouchZ2SPI: enabled power, scheduled bootloading
    [FTL:MSG] FTL_Open [OK]
    AppleS5L8720XFMSS::_fmssExecuteCommandLocked: Error Return 0xE00002D1
    BCM4325 Firmware Version: wl0: Sep 1 2008 14:42:30 version 4.173.4.0
    AppleS5L8720XFMSS::_fmssExecuteCommandLocked: Error Return 0xE00002D1
    yaFTL::_readPage(l:5942): we got read failure at 1282896
    AppleS5L8720XFMSS::_fmssExecuteCommandLocked: Error Return 0xE00002D1
    AppleBCM4325::initFirmware(): successful initialization
    AppleBCM4325::setPowerStateGated() : Powering On
    AppleBCM4325: Ethernet address 00:22:41:c2:18:6a
    AppleMultitouchZ2SPI: downloaded 128 bytes of prox calibration data ("built-in")
    AppleMultitouchZ2SPI: downloaded 256 bytes of calibration data ("built-in")
    AppleS5L8720XFMSS::_fmssExecuteCommandLocked: Error Return 0xE00002D1
    yaFTL::_readPage(l:5942): we got read failure at 1282896
    AppleMultitouchZ2SPI: downloaded 48612 bytes of firmware data ("0x0051.bin") in 150ms.
    unable to find baseband service
    unable to get device IMEI
    AppleSynopsysOTG2 - Configuration: PTP
    AppleSynopsysOTG2 Interface: PTP
    AppleSynopsysOTG2 - Configuration: iPod USB Interface
    AppleSynopsysOTG2 Interface: USBAudioControl
    AppleSynopsysOTG2 Interface: USBAudioStreaming
    AppleSynopsysOTG2 Interface: IapOverUsbHid
    AppleSynopsysOTG2 - Configuration: PTP + Apple Mobile Device
    AppleSynopsysOTG2 Interface: PTP
    AppleSynopsysOTG2 Interface: AppleUSBMux
    AppleSynopsysOTG2::gated_registerFunction Register function USBAudioControl
    IOAccessoryPortUSB::start
    AppleSynopsysOTG2::gated_registerFunction Register function IapOverUsbHid
    virtual bool AppleUSBDeviceMux::start(IOService*) build: Aug 10 2008 22:34:20
    AppleSynopsysOTG2::gated_registerFunction Register function USBAudioStreaming
    init_waste
    AppleSynopsysOTG2::gated_registerFunction Register function AppleUSBMux
    unrecognized key 'SavedDebugInfo' in value query
    unable to open plist: No such file or directory
    entering waitfor_storagedevice
    entering createfilesystempartitions
    MKCFWriteMedia failed: 6
    ==== end of device restore output ====
    2008-10-15 14:34:33.657 iTunes.exe[2620:17c0]: <Restore Device 01E4B520>: Restore failed (result = 6)
    2008-10-15 14:34:33.657 iTunes.exe[2620:17c0]: _AMRestoreModeDeviceFinalize: 01E4B520
    2008-10-15 14:34:37.298 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceArrival: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:37.298 iTunes.exe[2620:f38]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB0000
    2008-10-15 14:34:37.298 iTunes.exe[2620:f38]: AppleDevice::AppleDevice: AMDINTERFACEIBOOT \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000
    2008-10-15 14:34:37.313 iTunes.exe[2620:f38]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again, serial: CPID:8720 CPRV:10 CPFM:03 SCEP:01 BDID:00 ECID:00000279DC1535F7 SRNM:[1A8370HM201]
    2008-10-15 14:34:37.329 iTunes.exe[2620:f38]: WinAMRestore::OnInterfaceArrival: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:37.345 iTunes.exe[2620:f38]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#Vid05ac&Pid1281#6&2425cf25&0&3#{b8085869-feb9-404b-8cb1-1e5c14fa8c54}\0000
    2008-10-15 14:34:37.345 iTunes.exe[2620:f38]: AppleDevice::AppleDevice: AMDINTERFACEDFU \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000
    2008-10-15 14:34:37.360 iTunes.exe[2620:f38]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
    2008-10-15 14:34:37.360 iTunes.exe[2620:f38]: AppleDevice::SetDeviceID: AMDINTERFACEDFU \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000
    2008-10-15 14:34:37.360 iTunes.exe[2620:f38]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000
    2008-10-15 14:34:37.360 iTunes.exe[2620:f38]: IBOOT, DFU \\?\USB#VID05AC&PID1281#6&2425CF25&0&3#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000
    2008-10-15 14:34:37.360 iTunes.exe[2620:ccc]: iTunes: SCEP 1
    2008-10-15 14:34:38.970 iTunes.exe[2620:ccc]: iTunes: Restore error 6
    Looks like this one passed "Operation 28" but failed on "Operation 11".
    There is always an error message on the file "device_map.txt" - which it does not exists
    Contacted Apple Care and talked to 2nd line support. 2nd line support said they don't know how to interpret the log file. The log file can only be interpreted by the engineer.
    Apple Engineer: is this a hardware problem?

    Hey Ghost Shell,
    This article provides general tips that may resolve the issue.
    http://support.apple.com/kb/TS1275
    Make sure the iPod is directly connected to a high-speed USB port on the PC and not plugged into a hub, monitor, or keyboard. You can also disconnect any other USB devices, other than the keyboard and mouse.
    Try putting the iPod into recovery mode again and restoring as described here: http://support.apple.com/kb/HT1808
    If the issue persists after trying the tips above, the iPod may need hardware repair. Make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    You can also request repair online here: https://selfsolve.apple.com/GetWarranty.do
    Jason

  • Unable to initialize hdv deck problem

    Hi all,
    I'm having the 'unable to initialize hdv deck' problem. I am trying to capture HD footage from a Sony HVR-A1E camera. iLink and down conversion are off (like they should be) and I have just captured a HD tape before the problem started.
    I don't understand how I could capture HD footage just fine and then without touching any settings (just trying to start capture again) I suddenly get the error message, "Unable to initialize HDV deck. Please make sure a deck is connected and try again."
    Any ideas?

    Definitely. Shot on HDV, definite difference between the clips I've captured so far (HD capture that worked fine before this is high quality sharp image, where as when capturing in SD, image quality is poor and smaller).
    Everything has been filmed on the same camera with no setting changes between shots. Like I said before, I have already been able to capture today in HD just fine, but for some unknown reason (which I don't think is the prefs.) capture will not work. I can 'trick' FCE into HD capture but it gets stuck on cueing tape (even though video is playing fine on camera).

  • Logical standby stuck at initializing SQL apply only coordinator process up

    Hi
    OS: solaris 5.10
    Hardware: sun sparc
    Oracle database: 11.2.0.1.0
    Primary database name: asadmin
    Standby database name: test
    I had been trying to convert a physical standby to logical standby database. Both the primary and standby reside on the same machine.
    The physical standby was created with a hot backup of primary.
    I had been following document id 278371.1 to convert the physical to logical standby and used the following steps:
    Relevant init parameters on primary:
    *.db_name='asadmin'
    *.db_unique_name='asadmin'
    *.log_archive_config='dg_config=(asadmin,test)'
    *.log_archive_dest_1='location=/u01/asadmin/archive valid_for=(all_logfiles,all_roles) db_unique_name=asadmin'
    *.log_archive_dest_2='SERVICE=test async valid_for=(online_logfiles,primary_role) db_unique_name=test'
    *.log_archive_dest_state_1='enable'
    *.log_archive_dest_state_2='enable'
    *.fal_client='asadmin'
    *.fal_server='test'
    *.remote_login_passwordfile='EXCLUSIVE'
    Relevant init parameters on standby database:
    *.db_name='test' -- Was asadmin before I renamed the DB during conversion to logical standby
    *.db_unique_name='test'
    *.log_archive_dest_1='location=/u01/test/archive valid_for=(all_logfiles,all_roles) db_unique_name=test'
    *.log_archive_dest_2='service=asadmin async valid_for=(online_logfiles,primary_role) db_unique_name=asadmin'
    *.log_archive_dest_state_1=enable
    *.log_archive_dest_state_2=defer
    *.remote_login_passwordfile='EXCLUSIVE'*.fal_server=test
    *.fal_client=asadmin
    Steps on primary:
    1) alter system set log_archive_dest_state_2=defer;
    2) shutdown immediate;
    3) Made sure that the physical standby has applied all of the redo sent to it following the shutdown.
    4) startup mount;
    5) ALTER DATABASE BACKUP CONTROLFILE to '/home/oracle/control01.ctl';
    6) ALTER SYSTEM ENABLE RESTRICTED SESSION;
    7) ALTER DATABASE OPEN;
    8) Verified that the supplemental logging is on.
    9) ALTER SYSTEM ARCHIVE LOG CURRENT;
    10) Checked for the checkpoint change no. at this point which is 72403818 and is present in archive log file 1_62_775102253.dbf
    11) EXECUTE DBMS_LOGSTDBY.BUILD;
    12) ALTER SYSTEM ARCHIVE LOG CURRENT;
    13) Checked for the archive log containing dictionary build which is 1_64_775102253.dbf
    14) ALTER SYSTEM DISABLE RESTRICTED SESSION;
    Details of archive logs and related checkpoint change nos:
    NAME FIRST_CHANGE# NEXT_CHANGE#
    /u01/asadmin/archive/1_61_775102253.dbf 72402901 72403817
    /u01/asadmin/archive/1_62_775102253.dbf 72403817 72404069
    /u01/asadmin/archive/1_63_775102253.dbf 72404069 72404211
    /u01/asadmin/archive/1_64_775102253.dbf 72404211 72405700
    Steps on standby:
    1) shutdown immediate;
    2) Copy the archivelog file 61(was created at primary after apply stopped at standby), 62(contains checkpoint no. 72403818), 63 and 64(contains dictionary build). Copy the backup controlfile from step 5 above to the controlfile location in standby init.
    3) startup mount;
    4) Rename all datafiles and redo log files (including standby redo log files) to the correct path on standby.
    5) alter database recover automatic from '/u01/test/archive' until change 72405700 using backup controlfile; -- This completed error-free
    6) alter database guard all; -- this completed error free
    7) alter database open resetlogs; -- this completed error free.
    8) nid target=sys/oracle12 dbname=test
    9) Changed the db_name in init file to new name test.
    10) Added a tempfile to temp tablespaces.
    11) ALTER DATABASE REGISTER LOGICAL LOGFILE '/u01/test/archive/1_61_775102253.dbf'; -- ORA-16225: Missing LogMiner session name for Streams
    12) ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL 72405700; -- This completed error free.
    Also enabled the log_archive_dest_state_2 on primary.
    After this output from some views:
    SQL> SELECT SESSION_ID, STATE FROM V$LOGSTDBY_STATE;
    SESSION_ID STATE
    1 INITIALIZING
    SQL> SELECT SID, SERIAL#, SPID, TYPE FROM V$LOGSTDBY_PROCESS;
    SID SERIAL# SPID TYPE
    587 22 15476 COORDINATOR
    SELECT PERCENT_DONE, COMMAND
    FROM V$LOGMNR_DICTIONARY_LOAD
    WHERE SESSION_ID = (SELECT SESSION_ID FROM V$LOGSTDBY_STATE);
    PERCENT_DONE
    COMMAND
    0
    SQL> SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
    TYPE HIGH_SCN STATUS
    COORDINATOR ORA-16111: log mining and apply setting up
    SQL> SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;
    APPLIED_SCN NEWEST_SCN
    72405700 72411501
    SELECT THREAD#, SEQUENCE#, FILE_NAME FROM DBA_LOGSTDBY_LOG L
    WHERE NEXT_CHANGE# NOT IN
    (SELECT FIRST_CHANGE# FROM DBA_LOGSTDBY_LOG WHERE L.THREAD# = THREAD#)
    ORDER BY THREAD#,SEQUENCE#;
    no rows selected
    SQL> SELECT EVENT_TIME, STATUS, EVENT
    FROM DBA_LOGSTDBY_EVENTS
    ORDER BY EVENT_TIMESTAMP, COMMIT_SCN; 2 3
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:00:50 ORA-16111: log mining and apply setting up
    14-FEB-12 02:00:50 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:20:11 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:20:39 ORA-16111: log mining and apply setting up
    14-FEB-12 02:20:39 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 02:54:15 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 02:57:38 ORA-16111: log mining and apply setting up
    EVENT_TIME STATUS EVENT
    14-FEB-12 02:57:38 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 03:01:36 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 03:13:44 ORA-16111: log mining and apply setting up
    14-FEB-12 03:13:44 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 04:32:23 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:34:17 ORA-16111: log mining and apply setting up
    14-FEB-12 04:34:17 Apply LWM 72405699, HWM 72405699, SCN 72405699
    EVENT_TIME STATUS EVENT
    14-FEB-12 04:36:16 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 04:36:21 ORA-16111: log mining and apply setting up
    14-FEB-12 04:36:21 Apply LWM 72405699, HWM 72405699, SCN 72405699
    14-FEB-12 05:15:22 ORA-16128: User initiated stop apply successfully
    completed
    14-FEB-12 05:15:29 ORA-16111: log mining and apply setting up
    14-FEB-12 05:15:29 Apply LWM 72405699, HWM 72405699, SCN 72405699
    I also greped for lsp and lcr processes and found that lsp is up but do not see any lcr.
    The logs are getting transported to the archive destination on standby whenever they are archived on primary but are not getting applied to standby.
    Also in case the standby is down while a log is generated on primary it is not automatically transported to standby once the standby is up, means gap resolution is also not working.
    I see the following in alert log every time I try to restart the log apply, everything seems to be stuck at initialization.
    ALTER DATABASE START LOGICAL STANDBY APPLY (test)
    with optional part
    IMMEDIATE
    Attempt to start background Logical Standby process
    Tue Feb 14 05:15:28 2012
    LSP0 started with pid=28, OS id=23391
    Completed: alter database start logical standby apply immediate
    LOGMINER: Parameters summary for session# = 1
    LOGMINER: Number of processes = 3, Transaction Chunk Size = 201
    LOGMINER: Memory Size = 30M, Checkpoint interval = 150M
    LOGMINER: SpillScn 0, ResetLogScn 0
    -- NOTHING AFTER THIS

    Hello;
    I noticed some of your parameters seem to be wrong.
    fal_client - This is Obsolete in 11.2
    You have db_name='test' on the Standby, it should be 'asadmin'
    fal_server=test is set like this on the standby, it should be 'asadmin'
    I might consider changing VALID_FOR to this :
    VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)Would review 4.2 Step-by-Step Instructions for Creating a Logical Standby Database of Oracle Document E10700-02
    Document 278371.1 is showing its age in my humble opinion.
    -----Wait on this until you fix your parameters----------------------
    Try restarting the SQL Apply
    ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATEI don't see the parameter MAX_SERVERS, try setting it to 8 times the number of cores.
    Use these statements to trouble shoot :
    SELECT NAME, VALUE, UNIT FROM V$DATAGUARD_STATS;
    SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME LIKE ;TRANSACTIONS%';
    SELECT COUNT(1) AS IDLE_PREPARERS FROM V$LOGSTDBY_PROCESS WHERE
    TYPE = 'PREPERER' AND STATUS_CODE = 16166;Best Regards
    mseberg
    Edited by: mseberg on Feb 14, 2012 7:37 AM

  • Tecra M3 - Stucks at the Toshiba screen

    Hello everyone,
    I am trying to use the Product recovery disk on my Toshiba Tecra M3, however it does not seem to do anything.
    I have inserted the disk, turned off computer > started computer again pressing F12> i get the enter HDD password which i do sucessfully> after which it seem to get stuck a a screen with TOSHIBA and all devices icons. after which it does not do anything....
    does anyone have any idea on what to do next? or how to use the product recovery disk?
    any help is appreciated. Thanks.
    Nihal.

    > is there another way that i can initialize the recovery disk
    No, there is no other way for starting Toshiba recovery disk.
    In this case you can contact your authorized service provider. Maybe you can have a new one from them. Just ask for that! ;)
    Alternative you can use a Microsoft Windows disk. All drivers and tools can be downloaded on the Toshiba website.

  • Creating a "Business Service" from a WSDL: Can't initialize WsdlEntryHelper

    I'm working through a "HelloWorld" setup of Weblogic (10.0.3.5) and OSB (11.1.1.5.0) using OEPE 11.1.1.7.2.
    I have a OSB Project with a Weblogic Web Service. I've generated a WSDL and when I try to copy/paste or drag-and-drop or load the WSDL file through the Business Service Configuration I always get the following error:
    Description     Resource     Path     Location     Type
    Could not initialize class com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper     HelloWorldService.wsdl     /HelloWorld_SB     line 1     ALSB Synchronization Error
    If it helps, the WSDL is linked below. Any ideas? Thanks.
    http://pastie.org/3438419

    I was able to recreate the test WS project and get to the same error as before. The difference is I didn't create an EAR project nor endpoint interfaces. It published fine with this bare-bones setup.
    Can someone please take a look at my steps and see if I'm doing anything wrong and if you know how to get around it? Trying to get just the most simple local WS on OSB has taken days and I really need to get to work on something productive!
    I'm pasting my notes below, but since the forum doesn't cooperate with my spacing, I've pasted a more readable version at pastie:
    http://pastie.org/private/5dlmjcbkrjzzmurt2f04g
    STEPS FOR CREATING A TEST WS
    ============================
    1) File -> New -> WebLogic Web Services -> Web Service Project
    a) Project name: Foo_WS
    b) Location: C:\workspaces\osb\TEST0_WS
    c) Target runtime: Oralce WebLogic Servier 11gR1 PatchSet 4
    d) Default Configuration
    e) EAR Membership: unchecked
    d) Finish
    2) Under "Servers" tab, right click the WebLogic Server and add Foo_WS
    3) In the "Foo_WS" project Right click 'src' -> New WebLogic Web Service
    a) Name: Foo
    b) Package: foo
    c) Do not check 'Generate Service Endpoint Interface'
    d) Click Finish
    3) Load Foo.java
    a) Change Foo.hello() to return a String and take a String argument
    b) Change the class annotation to:
    @WebService(name = "Foo", targetNamespace = "http://foo", serviceName = "FooService", portName = "FooPort")
    4) Republish to the server
    5) Check that it is running, load "http://localhost:7001/Foo_WS/FooService?WSDL". See output:
    <?xml version='1.0' encoding='UTF-8'?><!-- Published by JAX-WS RI at http://jax-ws.dev.java.net. RI's version is Oracle JAX-WS 2.1.5. --><!-- Generated by JAX-WS RI at http://jax-ws.dev.java.net. RI's version is Oracle JAX-WS 2.1.5. --><definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://foo" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://foo" name="FooService">
    <types>
    <xsd:schema>
    <xsd:import namespace="http://foo" schemaLocation="http://localhost:7001/Foo_WS/FooService?xsd=1"/>
    </xsd:schema>
    </types>
    <message name="hello">
    <part name="parameters" element="tns:hello"/>
    </message>
    <message name="helloResponse">
    <part name="parameters" element="tns:helloResponse"/>
    </message>
    <portType name="Foo">
    <operation name="hello">
    <input message="tns:hello"/>
    <output message="tns:helloResponse"/>
    </operation>
    </portType>
    <binding name="FooPortBinding" type="tns:Foo">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
    <operation name="hello">
    <soap:operation soapAction=""/>
    <input>
    <soap:body use="literal"/>
    </input>
    <output>
    <soap:body use="literal"/>
    </output>
    </operation>
    </binding>
    <service name="FooService">
    <port name="FooPort" binding="tns:FooPortBinding">
    <soap:address location="http://localhost:7001/Foo_WS/FooService"/>
    </port>
    </service>
    </definitions>
    6) Back to OEPE: Create New OSB Configuration Project: name = Foo_Conf, ignored advanced settings, Finish
    7) Add Foo_Conf to the server and publish. Now the OWL Server 11gR1 PatchSet 4 at localhost has 2 projects: Foo_Conf and Foo_WS
    8) Create New OSB Project: Project name: Foo_SB, OSB Configuration: Foo_Conf
    9) Under Foo_WS project, right click Foo.java -> WebLogic Web Services -> Generate WSDL (created a .wsdl and .xsd)
    10) Drag-and-drop FooService.wsdl and FooService_schema1.xsd from Foo_WS to Foo_SB
    a) ERROR:
    Description Resource Path Location Type
    Could not initialize class com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper FooService.wsdl /Foo_SB line 1 ALSB Synchronization Error
    ...I have no idea how to procede. I've been using "The Definite Guide to SOA 2nd Edition" to guide me along. I'm stuck here because I want
    to create a business service and proxy service utilizing the first Web Service Project I made (Foo_WS).
    Any advice please?

  • W510 Solid State Drive (SSD) Gets Stuck Causing BSoD. Why?

    Hey guys, this has been a problem for a while now, and it is really mind boggling ... I have a Lenovo ThinkPad W510 laptop with a 256GB Crucial M4 SSD drive. Ever so randomly the drive just hangs, the LED light that the drive is trying to load something stays "ON" for up to 5 minutes or so before it finally goes into a Blue Screen of Death (BSoD). Once it goes into BSoD the laptop reboots and it gets stuck on the ThinkPad motherboard logo, eventually it will display "ERROR 2100: HDD0 (Hard Disk Drive) initialization error (X)" Where X is usually 1 or 2, sometimes 3 but rarely. It will not function again until I physically turn it off and back on using the power button.
    A little bit of background about the problem, this is my 3rd Crucial 256GB M4 SSD, Crucial has been very helpful and they went as far as replacing the drive twice, i am starting to highly doubt its a drive issue, I think it could be something from the laptop itself. To be more clear, my laptop has also been serviced back in March (Motherboard was swapped as well as keyboard), parts failure. It was all done in very timely manner and everything was OK after the swap.
    A representative from Crucial told me that this is a classical problem with the SATA controller driver handling TRIM, he said the drive is getting stuck in an infinite TRIM state which causes the BSoD, after that the drive goes into some sort of a "panic" mode to protect itself and doesn't function again until a full power cycle. (thus the need to turn off and then on the laptop) he also added it could be fixed by installing the correct SATA controller driver.
    I have tried to use the default windows SATA controller driver, and I have tried to use the Intel one too, and it seems to happen less often with the windows drivers, but overall, it happens at least once a day. It is really frustrating and I am not able to get anywhere with it.
    Any help or advice is highly appreciated. I am considering getting rid of the Crucial SSD altogether and just using Intel SSD instead, but I am really doubtful that it is the SSD's fault especially that its the 3rd one I use. I also know a couple of friends who own ThinkPads with Crucial M4 SSD inside them, and they seem to be working very well for them.
    Thanks in advance,
    Al.

    Hi again,
    Ok so I have applied the fix you have mentioned above, and it did improve (lower) the frequency of the problem happening. It really improved a lot significantly when I uninstalled the Intel drivers and used the Windows 7 built in SATA controller drivers.
    However, ... it still happens ... less frequent, but it still takes place, my SSD still gets stuck at least once in 3 days now, or once in 2 days (after severe testing) and the same scenario happens. I am really stuck at this point, and not sure which direction to take.
    Any help would really be appreciated, if you have / know any method to debug the BSoD's I get and a way to locate the source of the problem I am willing to go through it 1 by 1 and solve this problem before deciding to finally just giving up on the drive altogether.
    Sincerely,
    Al.

  • K9N2 SLI Platinum video won't initialize with monitor connected

    Hi,
    I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here  ). The first and second motherboard failures seemed slightly different but the failure seems to be the same for the second and third and it is making me think that another factor may be at play other than the motherboard. All of the failures have been with the integrated video (which is all I plan to use at the moment --I don't even own a PCI-E video card right now nor have any plans to get one in the near future).
    In the first motherboard, everything seemed to work (as far as I could tell --4 green diagnostic LED's and all that) but no video signal was produced. Testing with an antediluvian Virge DX based PCI card (some of you kiddies may be too young to remember such things) did show normal booting with that video card (as far as I allowed it to go) and I suspect, from the pattern of hard drive activity, that with the integrated video the boot process was also normal (I just couldn't see it because of no video signal being produced). But that is past and has been RMA'd.
    The replacement motherboard and the motherboard replacing the replacement motherboard, on the other hand, have seemed unable to initialize video whenever my monitor is connected but if the monitor is not connected, they work fine (but then video defaults to a 1028x768 mode and I cannot run my monitor at native resolution). Curiously enough, my second motherboard worked correctly twice before exhibiting the described behavior making me think, at the time, that I just got really unlucky and simply had had it fail shortly after testing it those two initial times.
    Not being able to initialize video while the monitor is plugged in means that if I try to start it while the monitor is attached, the motherboard will not even POST and that the diagnostic LED's will be stuck at the video initialization stage (three reds, and one green at group 4).
    Furthermore, if I start it with no monitor attached and plug the monitor in after I get 4 green LED's, it will start booting the OS (Windows XP) but the screen will go black when the Windows XP logo should be appearing. I can also leave it unplugged until it should be at the Windows XP logo stage (or plug it after the 4 green LED's and unplug it again before the video mode switch happens) and when I plug it back in I can see the Windows XP logo. However, as soon as it switches to the Windows XP desktop, I get a black screen.
    And again, if I leave the monitor unplugged until the Desktop should be showing up and I plug it in at that point (or go through the process of plugging and unplugging the monitor while avoiding having video mode switches happen with the monitor plugged in) I do get a Windows desktop at the 1024x768 resolution. Once in the desktop, as far as I can tell, I can do anything there that I normally would be able to do (so I mostly have a working system, as far as I can tell). I have even installed drivers, verified that the sound works, etc.. I will still do a repair install at some point because I am not doing this the "right way" and I probably needed to do it anyway (though I think it's using the right kernel and everything --showing 3 CPU's, etc.) but I am not looking for answers with that as my issue shows up before the system even goes through POST. Again, note that I cannot even take advantage of my monitor's native resolution with the current kludge.
    Curiously enough, if I try to switch to my native resolution of 1920x1200 it will do it but only by switching me to a virtual 1920x1200 desktop on a 1024x768 display (so there's no actual video mode switch involved and the desktop becomes bigger than what my monitor can show). It's as if part of the subsystem is reading the monitor and "knows" that it supports 1920x1200 but another part of the subsystem is just assuming some sort of 1024x768 default common lowest denominator for digital displays. I attribute this to the fact that video has been initialized with no monitor connected.
    I originally had a 350W Enermax power supply (which worked as long as the monitor was not plugged in) supplying 32A on the +3.3V rail, 32A on the +5V rail and 26A on the +12V rail but I replaced it with the power supply shown on my profile (which was probably totally unnecessary as I'm only using the integrated video --but hey, I now have a blue light coming from my power supply so that makes it all worth it  ). I suppose both power supplies could work badly with this motherboard model but it seems exceedingly unlikely that that would be the case (specially since everything works as long as there is no monitor plugged in during video mode switches).
    I currently am running it, on cardboard, with a single stick of RAM (on the slot next to the CPU) and nothing else connected to it except the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). I did play with RAM timings at the request of tech support but I can't imagine how it could be a RAM problem when everything works as long as a monitor isn't plugged in during video mode switches.
    I did update the BIOS from 3.4 to 3.5. 3.5 did not seem to be available at the time of my previous motherboard and I knew it was a real long shot for this to be a BIOS issue that would be fixed with the 3.5 update (specially since the update mentions only CPU support stuff and nothing about video) but I am desperate. Yes, I have done the whole resetting the CMOS thing.
    I am even considering the possibility that there may be some weird incompatibility between the video on this board and my monitor (under the assumption that, quoting Holmes, once you have eliminated the impossible, whatever remains, however improbable, must be the truth). I don't even know how that would work. Note that my monitor worked in my previous system with the digital input (my previous system is no longer available to me for testing --but I did get a chance to test it, after having problems with my first K9N2 SLI Platinum motherboard which I returned, and it worked). Note that my monitor works with the system in question (I simply cannot have it connected while there's a video mode switch under way). Note that the lack of a picture seems to be related to the motherboard as evidenced by it being stuck at the video initialization stage if I attempt to start it with the monitor connected.
    Any wild ideas? I do not want to return this motherboard a third time  and I specially do not want to return this motherboard a third time if it's something that can be easily fixed.

    Quote from: Svet on 25-May-09, 02:21:06
    Have you tried with just memory stick in 1st DIMM near to CPU socket and mainboard out of PC case?
    Yes, I currently am running it, on cardboard outside the case, with a single DIMM (on the slot next to the CPU) and nothing else connected to it except for the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). And it works,... as long as the monitor is not ever connected while video mode switches occur (including power on). And this is exactly how the previous motherboard which I returned also behaved.
    Addendum: As an additional note, I have tried the other DIMM on the same socket by the CPU with the same results (everything works as long as there's no monitor connected during a video mode switch). I also managed to make a bootable Memtest86+ (is that what people use to test memory these days?) USB stick and I am running it right now. It has shown no errors right so far but it has only been running a few minutes. I do not really expect any memory errors to be at fault since they would have to be magical memory errors which only cause problems when there is a monitor connected while a video mode switch is happening but I'm desperate to try anything to find out what the issue is.

  • [Solved] Failed to initialize the NVIDIA kernel module

    Hi all,
    I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
    The method I am using - after much trial - is:
    - uninstall nouveau and mesa lib
    - install nvidia package
    - remove nouveau module entry in mkinitcpio.conf
    - run `mkinitcpio -p linux`
    - edit .conf in xorg.conf.d with minimal required settings. Currently:
    Section "Device"
    Identifier "device0"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    I have installed the linux-headers package and tried reinstalling nvidia again
    Card:
    01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
    Kernel:
    3.12.6-1-ARCH
    My Xorg.0.log looks like:
    [ 3.979]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 3.979] X Protocol Version 11, Revision 0
    [ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
    [ 3.979] Build Date: 13 December 2013 03:11:42PM
    [ 3.979]
    [ 3.979] Current version of pixman: 0.32.4
    [ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
    [ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3.980] (==) No Layout section. Using the first Screen section.
    [ 3.980] (==) No screen section available. Using defaults.
    [ 3.980] (**) |-->Screen "Default Screen Section" (0)
    [ 3.980] (**) | |-->Monitor "<default monitor>"
    [ 3.981] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 3.981] (**) | |-->Device "device0"
    [ 3.981] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 3.981] (==) Automatically adding devices
    [ 3.981] (==) Automatically enabling devices
    [ 3.981] (==) Automatically adding GPU devices
    [ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 3.984] Entry deleted from font path.
    [ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3.984] Entry deleted from font path.
    [ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3.984] Entry deleted from font path.
    [ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3.984] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3.984] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3.984] (II) Loader magic: 0x7fec20
    [ 3.984] (II) Module ABI versions:
    [ 3.984] X.Org ANSI C Emulation: 0.4
    [ 3.984] X.Org Video Driver: 14.1
    [ 3.984] X.Org XInput driver : 19.1
    [ 3.984] X.Org Server Extension : 7.0
    [ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 3.986] Initializing built-in extension Generic Event Extension
    [ 3.986] Initializing built-in extension SHAPE
    [ 3.986] Initializing built-in extension MIT-SHM
    [ 3.986] Initializing built-in extension XInputExtension
    [ 3.986] Initializing built-in extension XTEST
    [ 3.986] Initializing built-in extension BIG-REQUESTS
    [ 3.986] Initializing built-in extension SYNC
    [ 3.986] Initializing built-in extension XKEYBOARD
    [ 3.986] Initializing built-in extension XC-MISC
    [ 3.986] Initializing built-in extension SECURITY
    [ 3.986] Initializing built-in extension XINERAMA
    [ 3.986] Initializing built-in extension XFIXES
    [ 3.986] Initializing built-in extension RENDER
    [ 3.986] Initializing built-in extension RANDR
    [ 3.986] Initializing built-in extension COMPOSITE
    [ 3.986] Initializing built-in extension DAMAGE
    [ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3.986] Initializing built-in extension DOUBLE-BUFFER
    [ 3.986] Initializing built-in extension RECORD
    [ 3.986] Initializing built-in extension DPMS
    [ 3.986] Initializing built-in extension X-Resource
    [ 3.986] Initializing built-in extension XVideo
    [ 3.986] Initializing built-in extension XVideo-MotionCompensation
    [ 3.986] Initializing built-in extension XFree86-VidModeExtension
    [ 3.986] Initializing built-in extension XFree86-DGA
    [ 3.986] Initializing built-in extension XFree86-DRI
    [ 3.986] Initializing built-in extension DRI2
    [ 3.986] (II) LoadModule: "glx"
    [ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4.075] compiled for 4.0.2, module version = 1.0.0
    [ 4.075] Module class: X.Org Server Extension
    [ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
    [ 4.076] Loading extension GLX
    [ 4.076] (II) LoadModule: "nvidia"
    [ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4.082] compiled for 4.0.2, module version = 1.0.0
    [ 4.082] Module class: X.Org Video Driver
    [ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4.083] (++) using VT number 7
    [ 4.090] (II) Loading sub module "fb"
    [ 4.090] (II) LoadModule: "fb"
    [ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4.091] (II) Module fb: vendor="X.Org Foundation"
    [ 4.091] compiled for 1.14.5, module version = 1.0.0
    [ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 4.091] (II) Loading sub module "wfb"
    [ 4.091] (II) LoadModule: "wfb"
    [ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4.092] (II) Module wfb: vendor="X.Org Foundation"
    [ 4.092] compiled for 1.14.5, module version = 1.0.0
    [ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4.092] (II) Loading sub module "ramdac"
    [ 4.092] (II) LoadModule: "ramdac"
    [ 4.092] (II) Module "ramdac" already built-in
    [ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4.093] (==) NVIDIA(0): RGB weight 888
    [ 4.093] (==) NVIDIA(0): Default visual is TrueColor
    [ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
    [ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
    [ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
    [ 4.095] (EE) NVIDIA(0): *** Aborting ***
    [ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 4.095] (II) UnloadModule: "nvidia"
    [ 4.095] (II) UnloadSubModule: "wfb"
    [ 4.095] (II) UnloadSubModule: "fb"
    [ 4.095] (EE) Screen(s) found, but none have a usable configuration.
    [ 4.095] (EE)
    Fatal server error:
    [ 4.095] (EE) no screens found(EE)
    [ 4.095] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 4.095] (EE)
    [ 4.107] (EE) Server terminated with error (1). Closing log file.
    The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
    Any help much appriciated. I've been at this for a while. Learning a lot in the process!
    Last edited by gnibbler (2014-01-04 22:31:49)

    Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
    I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
    I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
    I hope some info in here helps some other stuck archer.
    Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
    Last edited by gnibbler (2014-01-04 22:35:00)

  • Gnome stuck in fallback mode - not recognizing nvidia drivers

    Every time I start a gnome session it is stuck in fallback mode. Checking under System Settings > Details > Graphics I see that the Driver is listed as Unknown and Experience is Fallback. Forced Fallback Mode is OFF. I cannot get it to recognize the nvidia driver (I have also tried nouveau but it did not recognize that either). I have tried re-installing the nvidia driver and rebooting, but I can't seem to fix the problem . Here are the logs that I thought might be relevant. If you need to see anything else please let me know . Thanks.
    inxi -Gx
    Graphics: Card: NVIDIA GT216 [Quadro FX 880M] bus-ID: 01:00.0
    X.org: 1.12.3 drivers: nvidia (unloaded: fbdev) Resolution: 132x96
    Kernel if it matters:
    Kernel~3.4.6-1-ARCH x86_64
    Output of Xorg.0.log
    1 [ 29.455]
    2 X.Org X Server 1.12.3
    3 Release Date: 2012-07-09
    4 [ 29.455] X Protocol Version 11, Revision 0
    5 [ 29.455] Build Operating System: Linux 3.4.4-3-ARCH x86_64
    6 [ 29.455] Current Operating System: Linux pluto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
    7 [ 29.455] Kernel command line: root=/dev/sda1 ro
    8 [ 29.455] Build Date: 09 July 2012 03:59:39PM
    9 [ 29.455]
    10 [ 29.455] Current version of pixman: 0.26.2
    11 [ 29.455] Before reporting problems, check http://wiki.x.org
    12 to make sure that you have the latest version.
    13 [ 29.455] Markers: (--) probed, (**) from config file, (==) default setting,
    14 (++) from command line, (!!) notice, (II) informational,
    15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    16 [ 29.455] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:49:20 2012
    17 [ 29.501] (==) Using config directory: "/etc/X11/xorg.conf.d"
    18 [ 29.516] (==) No Layout section. Using the first Screen section.
    19 [ 29.516] (==) No screen section available. Using defaults.
    20 [ 29.516] (**) |-->Screen "Default Screen Section" (0)
    21 [ 29.516] (**) | |-->Monitor "<default monitor>"
    22 [ 29.517] (==) No monitor specified for screen "Default Screen Section".
    23 Using a default monitor configuration.
    24 [ 29.517] (==) Automatically adding devices
    25 [ 29.517] (==) Automatically enabling devices
    26 [ 29.554] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    27 [ 29.554] Entry deleted from font path.
    28 [ 29.604] (==) FontPath set to:
    29 /usr/share/fonts/misc/,
    30 /usr/share/fonts/TTF/,
    31 /usr/share/fonts/Type1/,
    32 /usr/share/fonts/100dpi/,
    33 /usr/share/fonts/75dpi/
    34 [ 29.604] (==) ModulePath set to "/usr/lib/xorg/modules"
    35 [ 29.604] (II) The server relies on udev to provide the list of input devices.
    36 If no devices become available, reconfigure udev or disable AutoAddDevices.
    37 [ 29.604] (II) Loader magic: 0x7c8b00
    38 [ 29.604] (II) Module ABI versions:
    39 [ 29.604] X.Org ANSI C Emulation: 0.4
    40 [ 29.604] X.Org Video Driver: 12.0
    41 [ 29.604] X.Org XInput driver : 16.0
    42 [ 29.604] X.Org Server Extension : 6.0
    43 [ 29.606] (--) PCI:*(0:1:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/335544 32, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    44 [ 29.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    45 [ 29.606] (II) LoadModule: "extmod"
    46 [ 29.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    47 [ 29.632] (II) Module extmod: vendor="X.Org Foundation"
    48 [ 29.632] compiled for 1.12.3, module version = 1.0.0
    49 [ 29.632] Module class: X.Org Server Extension
    50 [ 29.632] ABI class: X.Org Server Extension, version 6.0
    51 [ 29.632] (II) Loading extension MIT-SCREEN-SAVER
    52 [ 29.632] (II) Loading extension XFree86-VidModeExtension
    53 [ 29.632] (II) Loading extension XFree86-DGA
    54 [ 29.632] (II) Loading extension DPMS
    55 [ 29.632] (II) Loading extension XVideo
    56 [ 29.632] (II) Loading extension XVideo-MotionCompensation
    57 [ 29.632] (II) Loading extension X-Resource
    58 [ 29.632] (II) LoadModule: "dbe"
    59 [ 29.632] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    60 [ 29.640] (II) Module dbe: vendor="X.Org Foundation"
    61 [ 29.640] compiled for 1.12.3, module version = 1.0.0
    62 [ 29.640] Module class: X.Org Server Extension
    63 [ 29.640] ABI class: X.Org Server Extension, version 6.0
    64 [ 29.640] (II) Loading extension DOUBLE-BUFFER
    65 [ 29.640] (II) LoadModule: "glx"
    66 [ 29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    67 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
    68 [ 30.719] compiled for 4.0.2, module version = 1.0.0
    69 [ 30.719] Module class: X.Org Server Extension
    70 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
    71 [ 30.719] (II) Loading extension GLX
    72 [ 30.719] (II) LoadModule: "record"
    73 [ 30.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    74 [ 30.727] (II) Module record: vendor="X.Org Foundation"
    75 [ 30.727] compiled for 1.12.3, module version = 1.13.0
    76 [ 30.727] Module class: X.Org Server Extension
    77 [ 30.727] ABI class: X.Org Server Extension, version 6.0
    78 [ 30.727] (II) Loading extension RECORD
    79 [ 30.727] (II) LoadModule: "dri"
    80 [ 30.727] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    81 [ 30.747] (II) Module dri: vendor="X.Org Foundation"
    82 [ 30.747] compiled for 1.12.3, module version = 1.0.0
    83 [ 30.747] ABI class: X.Org Server Extension, version 6.0
    84 [ 30.747] (II) Loading extension XFree86-DRI
    85 [ 30.747] (II) LoadModule: "dri2"
    86 [ 30.747] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    87 [ 30.751] (II) Module dri2: vendor="X.Org Foundation"
    88 [ 30.751] compiled for 1.12.3, module version = 1.2.0
    89 [ 30.751] ABI class: X.Org Server Extension, version 6.0
    90 [ 30.751] (II) Loading extension DRI2
    91 [ 30.751] (==) Matched nouveau as autoconfigured driver 0
    92 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
    93 [ 30.751] (==) Matched nv as autoconfigured driver 2
    94 [ 30.751] (==) Matched vesa as autoconfigured driver 3
    95 [ 30.751] (==) Matched fbdev as autoconfigured driver 4
    96 [ 30.751] (==) Assigned the driver to the xf86ConfigLayout
    97 [ 30.751] (II) LoadModule: "nouveau"
    98 [ 30.800] (WW) Warning, couldn't open module nouveau
    99 [ 30.800] (II) UnloadModule: "nouveau"
    100 [ 30.800] (II) Unloading nouveau
    101 [ 30.800] (EE) Failed to load module "nouveau" (module does not exist, 0)
    102 [ 30.800] (II) LoadModule: "nvidia"
    103 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    104 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
    105 [ 30.902] compiled for 4.0.2, module version = 1.0.0
    106 [ 30.902] Module class: X.Org Video Driver
    107 [ 30.942] (II) LoadModule: "nv"
    108 [ 30.943] (WW) Warning, couldn't open module nv
    109 [ 30.943] (II) UnloadModule: "nv"
    110 [ 30.943] (II) Unloading nv
    111 [ 30.943] (EE) Failed to load module "nv" (module does not exist, 0)
    112 [ 30.943] (II) LoadModule: "vesa"
    113 [ 30.943] (WW) Warning, couldn't open module vesa
    114 [ 30.943] (II) UnloadModule: "vesa"
    115 [ 30.943] (II) Unloading vesa
    116 [ 30.943] (EE) Failed to load module "vesa" (module does not exist, 0)
    117 [ 30.943] (II) LoadModule: "fbdev"
    118 [ 30.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    119 [ 30.957] (II) Module fbdev: vendor="X.Org Foundation"
    120 [ 30.957] compiled for 1.12.2, module version = 0.4.3
    121 [ 30.957] Module class: X.Org Video Driver
    122 [ 30.957] ABI class: X.Org Video Driver, version 12.0
    123 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
    124 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    125 [ 30.958] (II) FBDEV: driver for framebuffer: fbdev
    126 [ 30.958] (++) using VT number 7
    127
    128 [ 30.964] (II) Loading sub module "fb"
    129 [ 30.964] (II) LoadModule: "fb"
    130 [ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
    131 [ 30.979] (II) Module fb: vendor="X.Org Foundation"
    132 [ 30.979] compiled for 1.12.3, module version = 1.0.0
    133 [ 30.979] ABI class: X.Org ANSI C Emulation, version 0.4
    134 [ 30.980] (II) Loading sub module "wfb"
    135 [ 30.980] (II) LoadModule: "wfb"
    136 [ 30.980] (II) Loading /usr/lib/xorg/modules/libwfb.so
    137 [ 30.988] (II) Module wfb: vendor="X.Org Foundation"
    138 [ 30.988] compiled for 1.12.3, module version = 1.0.0
    139 [ 30.988] ABI class: X.Org ANSI C Emulation, version 0.4
    140 [ 30.988] (II) Loading sub module "ramdac"
    141 [ 30.988] (II) LoadModule: "ramdac"
    142 [ 30.988] (II) Module "ramdac" already built-in
    143 [ 31.014] (WW) Falling back to old probe method for fbdev
    144 [ 31.014] (II) Loading sub module "fbdevhw"
    145 [ 31.014] (II) LoadModule: "fbdevhw"
    146 [ 31.015] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    147 [ 31.031] (II) Module fbdevhw: vendor="X.Org Foundation"
    148 [ 31.031] compiled for 1.12.3, module version = 0.0.2
    149 [ 31.031] ABI class: X.Org Video Driver, version 12.0
    150 [ 31.031] (EE) open /dev/fb0: No such file or directory
    151 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
    152 "Default Screen Section" for depth/fbbpp 24/32
    153 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    154 [ 31.031] (==) NVIDIA(0): RGB weight 888
    155 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
    156 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    157 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
    158 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    159 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
    160 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
    161 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
    162 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
    163 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    164 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    165 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
    166 [ 32.673] (--) NVIDIA(0): CRT-0
    167 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
    168 [ 32.673] (--) NVIDIA(0): DFP-1
    169 [ 32.673] (--) NVIDIA(0): DFP-2
    170 [ 32.673] (--) NVIDIA(0): DFP-3
    171 [ 32.673] (--) NVIDIA(0): DFP-4
    172 [ 32.673] (--) NVIDIA(0): DFP-5
    173 [ 32.673] (--) NVIDIA(0): DFP-6
    174 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    175 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
    176 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
    177 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    178 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    179 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    180 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    181 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
    182 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
    183 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
    184 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    185 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
    186 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
    187 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
    188 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
    189 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    190 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    191 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    192 [ 32.674] (==) NVIDIA(0):
    193 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    194 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
    195 [ 32.674] (==) NVIDIA(0):
    196 [ 32.675] (II) NVIDIA(0): Validated modes:
    197 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    198 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    199 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
    200 [ 33.739] (--) NVIDIA(0): option
    201 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
    202 [ 33.739] (WW) NVIDIA(0): UBB.
    203 [ 33.739] (II) UnloadModule: "fbdev"
    204 [ 33.739] (II) Unloading fbdev
    205 [ 33.739] (II) UnloadSubModule: "fbdevhw"
    206 [ 33.739] (II) Unloading fbdevhw
    207 [ 33.739] (--) Depth 24 pixmap format is 32 bpp
    208 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    209 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    210 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    211 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
    212 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    213 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    214 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    215 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    216 [ 33.744] (II) NVIDIA(0): Config Options in the README.
    217 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    218 [ 34.063] (II) Loading extension NV-GLX
    219 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
    220 [ 34.122] (==) NVIDIA(0): Backing store disabled
    221 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
    222 [ 34.122] (==) NVIDIA(0): DPMS enabled
    223 [ 34.123] (II) Loading extension NV-CONTROL
    224 [ 34.123] (II) Loading extension XINERAMA
    225 [ 34.123] (II) Loading sub module "dri2"
    226 [ 34.123] (II) LoadModule: "dri2"
    227 [ 34.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    228 [ 34.123] (II) Module dri2: vendor="X.Org Foundation"
    229 [ 34.123] compiled for 1.12.3, module version = 1.2.0
    230 [ 34.123] ABI class: X.Org Server Extension, version 6.0
    231 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
    232 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    233 [ 34.123] (--) RandR disabled
    234 [ 34.123] (II) Initializing built-in extension Generic Event Extension
    235 [ 34.123] (II) Initializing built-in extension SHAPE
    236 [ 34.123] (II) Initializing built-in extension MIT-SHM
    237 [ 34.123] (II) Initializing built-in extension XInputExtension
    238 [ 34.123] (II) Initializing built-in extension XTEST
    239 [ 34.123] (II) Initializing built-in extension BIG-REQUESTS
    240 [ 34.123] (II) Initializing built-in extension SYNC
    241 [ 34.123] (II) Initializing built-in extension XKEYBOARD
    242 [ 34.123] (II) Initializing built-in extension XC-MISC
    243 [ 34.124] (II) Initializing built-in extension SECURITY
    244 [ 34.124] (II) Initializing built-in extension XINERAMA
    245 [ 34.124] (II) Initializing built-in extension XFIXES
    246 [ 34.124] (II) Initializing built-in extension RENDER
    247 [ 34.124] (II) Initializing built-in extension RANDR
    248 [ 34.124] (II) Initializing built-in extension COMPOSITE
    249 [ 34.124] (II) Initializing built-in extension DAMAGE
    250 [ 34.126] (II) Initializing extension GLX
    251 [ 34.689] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    252 [ 34.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    253 [ 34.689] (II) LoadModule: "evdev"
    254 [ 34.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    255 [ 34.704] (II) Module evdev: vendor="X.Org Foundation"
    256 [ 34.704] compiled for 1.12.3, module version = 2.7.1
    257 [ 34.704] Module class: X.Org XInput Driver
    258 [ 34.704] ABI class: X.Org XInput driver, version 16.0
    259 [ 34.704] (II) Using input driver 'evdev' for 'Power Button'
    260 [ 34.704] (**) Power Button: always reports core events
    261 [ 34.704] (**) evdev: Power Button: Device: "/dev/input/event3"
    262 [ 34.704] (--) evdev: Power Button: Vendor 0 Product 0x1
    263 [ 34.704] (--) evdev: Power Button: Found keys
    264 [ 34.704] (II) evdev: Power Button: Configuring as keyboard
    265 [ 34.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    266 [ 34.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    267 [ 34.704] (**) Option "xkb_rules" "evdev"
    268 [ 34.704] (**) Option "xkb_model" "evdev"
    269 [ 34.704] (**) Option "xkb_layout" "us"
    270 [ 34.727] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    271 [ 34.727] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    272 [ 34.727] (II) Using input driver 'evdev' for 'Video Bus'
    273 [ 34.727] (**) Video Bus: always reports core events
    274 [ 34.727] (**) evdev: Video Bus: Device: "/dev/input/event4"
    275 [ 34.728] (--) evdev: Video Bus: Vendor 0 Product 0x6
    276 [ 34.728] (--) evdev: Video Bus: Found keys
    277 [ 34.728] (II) evdev: Video Bus: Configuring as keyboard
    278 [ 34.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/ev ent4"
    279 [ 34.728] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    280 [ 34.728] (**) Option "xkb_rules" "evdev"
    281 [ 34.728] (**) Option "xkb_model" "evdev"
    282 [ 34.728] (**) Option "xkb_layout" "us"
    283 [ 34.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    284 [ 34.728] (II) No input driver specified, ignoring this device.
    285 [ 34.728] (II) This device may have been added with another device file.
    286 [ 34.729] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    287 [ 34.729] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    288 [ 34.729] (II) Using input driver 'evdev' for 'Sleep Button'
    289 [ 34.729] (**) Sleep Button: always reports core events
    290 [ 34.729] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    291 [ 34.729] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    292 [ 34.729] (--) evdev: Sleep Button: Found keys
    293 [ 34.729] (II) evdev: Sleep Button: Configuring as keyboard
    294 [ 34.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    295 [ 34.729] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    296 [ 34.729] (**) Option "xkb_rules" "evdev"
    297 [ 34.729] (**) Option "xkb_model" "evdev"
    298 [ 34.729] (**) Option "xkb_layout" "us"
    299 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
    300 [ 34.730] (II) No input driver specified, ignoring this device.
    301 [ 34.730] (II) This device may have been added with another device file.
    302 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
    303 [ 34.730] (II) No input driver specified, ignoring this device.
    304 [ 34.730] (II) This device may have been added with another device file.
    305 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
    306 [ 34.731] (II) No input driver specified, ignoring this device.
    307 [ 34.731] (II) This device may have been added with another device file.
    308 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
    309 [ 34.731] (II) No input driver specified, ignoring this device.
    310 [ 34.731] (II) This device may have been added with another device file.
    311 [ 34.732] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
    312 [ 34.732] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    313 [ 34.732] (II) Using input driver 'evdev' for 'Integrated Camera'
    314 [ 34.732] (**) Integrated Camera: always reports core events
    315 [ 34.732] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
    316 [ 34.732] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
    317 [ 34.732] (--) evdev: Integrated Camera: Found keys
    318 [ 34.732] (II) evdev: Integrated Camera: Configuring as keyboard
    319 [ 34.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6/event6"
    320 [ 34.732] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
    321 [ 34.732] (**) Option "xkb_rules" "evdev"
    322 [ 34.732] (**) Option "xkb_model" "evdev"
    323 [ 34.732] (**) Option "xkb_layout" "us"
    324 [ 34.732] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
    325 [ 34.732] (II) No input driver specified, ignoring this device.
    326 [ 34.732] (II) This device may have been added with another device file.
    327 [ 34.733] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
    328 [ 34.733] (II) No input driver specified, ignoring this device.
    329 [ 34.733] (II) This device may have been added with another device file.
    330 [ 34.733] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
    331 [ 34.733] (II) No input driver specified, ignoring this device.
    332 [ 34.733] (II) This device may have been added with another device file.
    333 [ 34.734] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
    334 [ 34.734] (II) No input driver specified, ignoring this device.
    335 [ 34.734] (II) This device may have been added with another device file.
    336 [ 34.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
    337 [ 34.734] (II) No input driver specified, ignoring this device.
    338 [ 34.734] (II) This device may have been added with another device file.
    339 [ 34.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    340 [ 34.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    341 [ 34.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    342 [ 34.735] (**) AT Translated Set 2 keyboard: always reports core events
    343 [ 34.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    344 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    345 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
    346 [ 34.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    347 [ 34.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    348 [ 34.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    349 [ 34.735] (**) Option "xkb_rules" "evdev"
    350 [ 34.735] (**) Option "xkb_model" "evdev"
    351 [ 34.735] (**) Option "xkb_layout" "us"
    352 [ 34.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    353 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    354 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    355 [ 34.736] (II) LoadModule: "synaptics"
    356 [ 34.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    357 [ 34.757] (II) Module synaptics: vendor="X.Org Foundation"
    358 [ 34.757] compiled for 1.12.2, module version = 1.6.2
    359 [ 34.757] Module class: X.Org XInput Driver
    360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
    361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
    363 [ 34.757] (**) Option "Device" "/dev/input/event8"
    364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    371 [ 34.758] (**) Option "TapButton1" "1"
    372 [ 34.758] (**) Option "TapButton2" "2"
    373 [ 34.758] (**) Option "TapButton3" "3"
    374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    359 [ 34.757] Module class: X.Org XInput Driver
    360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
    361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
    363 [ 34.757] (**) Option "Device" "/dev/input/event8"
    364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    371 [ 34.758] (**) Option "TapButton1" "1"
    372 [ 34.758] (**) Option "TapButton2" "2"
    373 [ 34.758] (**) Option "TapButton3" "3"
    374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    375 [ 34.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
    376 [ 34.758] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
    377 [ 34.758] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
    378 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    379 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    380 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    381 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    382 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    383 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    384 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    385 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    386 [ 34.758] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    387 [ 34.758] (II) No input driver specified, ignoring this device.
    388 [ 34.758] (II) This device may have been added with another device file.
    389 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
    390 [ 34.759] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    391 [ 34.759] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    392 [ 34.759] (**) TPPS/2 IBM TrackPoint: always reports core events
    393 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
    394 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    395 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    396 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    397 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    398 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    399 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    400 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    401 [ 34.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
    402 [ 34.759] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
    403 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    404 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    405 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    406 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    407 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    408 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
    409 [ 34.759] (II) No input driver specified, ignoring this device.
    410 [ 34.759] (II) This device may have been added with another device file.
    411 [ 34.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    412 [ 34.759] (II) No input driver specified, ignoring this device.
    413 [ 34.759] (II) This device may have been added with another device file.
    414 [ 34.760] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
    415 [ 34.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    416 [ 34.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    417 [ 34.760] (**) ThinkPad Extra Buttons: always reports core events
    418 [ 34.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
    419 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    420 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Found keys
    421 [ 34.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    422 [ 34.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
    423 [ 34.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
    424 [ 34.760] (**) Option "xkb_rules" "evdev"
    425 [ 34.760] (**) Option "xkb_model" "evdev"
    426 [ 34.760] (**) Option "xkb_layout" "us"
    427 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    428 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
    429 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    430 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    431 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    432 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    433 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
    434 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    435 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    436 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    437 [ 968.853] (II) evdev: Power Button: Close
    438 [ 968.853] (II) UnloadModule: "evdev"
    439 [ 968.873] (II) evdev: Video Bus: Close
    440 [ 968.873] (II) UnloadModule: "evdev"
    441 [ 968.893] (II) evdev: Sleep Button: Close
    442 [ 968.893] (II) UnloadModule: "evdev"
    443 [ 968.896] (II) evdev: Integrated Camera: Close
    444 [ 968.896] (II) UnloadModule: "evdev"
    445 [ 968.896] (II) evdev: AT Translated Set 2 keyboard: Close
    446 [ 968.897] (II) UnloadModule: "evdev"
    447 [ 968.897] (II) UnloadModule: "synaptics"
    448 [ 968.897] (II) evdev: TPPS/2 IBM TrackPoint: Close
    449 [ 968.897] (II) UnloadModule: "evdev"
    450 [ 968.898] (II) evdev: ThinkPad Extra Buttons: Close
    451 [ 968.898] (II) UnloadModule: "evdev"
    452 [ 969.425] Server terminated successfully (0). Closing log file.
    A case insensitive grep of nvidia on the previous log file (Xorg.0.log)
    1 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
    2 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
    3 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
    4 [ 30.800] (II) LoadModule: "nvidia"
    5 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    6 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
    7 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
    8 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    9 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
    10 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    11 [ 31.031] (==) NVIDIA(0): RGB weight 888
    12 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
    13 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    14 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
    15 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    16 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
    17 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
    18 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
    19 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
    20 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    21 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    22 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
    23 [ 32.673] (--) NVIDIA(0): CRT-0
    24 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
    25 [ 32.673] (--) NVIDIA(0): DFP-1
    26 [ 32.673] (--) NVIDIA(0): DFP-2
    27 [ 32.673] (--) NVIDIA(0): DFP-3
    28 [ 32.673] (--) NVIDIA(0): DFP-4
    29 [ 32.673] (--) NVIDIA(0): DFP-5
    30 [ 32.673] (--) NVIDIA(0): DFP-6
    31 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    32 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
    33 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
    34 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    35 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    36 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    37 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    38 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
    39 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
    40 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
    41 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    42 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
    43 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
    44 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
    45 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
    46 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    47 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    48 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    49 [ 32.674] (==) NVIDIA(0):
    50 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    51 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
    52 [ 32.674] (==) NVIDIA(0):
    53 [ 32.675] (II) NVIDIA(0): Validated modes:
    54 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    55 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    56 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
    57 [ 33.739] (--) NVIDIA(0): option
    58 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
    59 [ 33.739] (WW) NVIDIA(0): UBB.
    60 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    61 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    62 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    63 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
    64 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    65 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    66 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    67 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    68 [ 33.744] (II) NVIDIA(0): Config Options in the README.
    69 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    70 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
    71 [ 34.122] (==) NVIDIA(0): Backing store disabled
    72 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
    73 [ 34.122] (==) NVIDIA(0): DPMS enabled
    74 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
    75 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    76 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
    77 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
    78 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
    79 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
    80 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    81 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
    82 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    83 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    84 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    85 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
    86 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
    87 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    88 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
    89 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    .xsession-errors (Note it was compressed a bit since a lot of the lines were the same)
    1 /etc/gdm/Xsession: Beginning session setup...
    2 localuser:hal being added to access control list
    3 /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
    4 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
    5 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
    6 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
    7 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
    8 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
    9 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
    10 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
    11 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
    12 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
    13 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
    14 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
    15 Initializing tracker-store...
    16 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
    17 Failed to play sound: File or data not found
    18
    19 ** (nm-applet:1443): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unkno wn return code 1
    20 ** Message: applet now removed from the notification area
    21
    22 ** (nm-applet:1443): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown ret urn code 1.
    23
    24 ** (nm-applet:1443): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
    25 Initializing tracker-miner-fs...
    26 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-miner-fs.cfg'
    27 Starting log:
    28 File:'/home/hal/.local/share/tracker/tracker-miner-fs.log'
    29 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
    30 Starting log:
    31 File:'/home/hal/.local/share/tracker/tracker-store.log'
    32 Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    33 ** Message: applet now embedded in the notification area
    34 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    35 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    36 Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknow n return code 1.
    37 Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Launch helper e xited with unknown return code 1
    38
    39 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    40 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    41 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    42
    43 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
    44 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    45 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    46
    47 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
    48 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    49 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    50
    51 (evolution:3988): evolution-network-manager-WARNING **: network_manager_query_state: GDBus.Error:org.freedesktop.DBus.Error.Spa wn.ChildExited: Launch helper exited with unknown return code 1
    52 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    53 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    >>> 54-3722 open: No such file or directory
    3723 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    3724 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    3725 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3726 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3727 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3728 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3729 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3730 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3731 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3732 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3733 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3734 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    3735 Window manager warning: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
    3736 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    3737 Window manager warning: Got a request to focus 0x2000016 (Inbox (232) with a timestamp of 0. This shouldn't happen!
    3738 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    3739 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    3740 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    3741 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    3742 PolicyKit daemon disconnected from the bus.
    3743 We are no longer a registered authentication agent.
    3744 [1337117088,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provi ded by the application
    3745 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
    3746 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
    3747 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
    3748 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
    3749 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
    3750 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
    3751 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
    3752 ** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
    3753 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
    3754 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    3755 Window manager warning: Got a request to focus 0x1c00005 (hal@pluto:) with a timestamp of 0. This shouldn't happen!
    3756 ** Message: applet now removed from the notification area
    3757 gnome-session[1367]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    3758
    3759
    3760 (gnome-shell-calendar-server:1486): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Resource temporarily unavai lable) on X server :0.
    3761
    3762
    3763 (nm-applet:1443): Gdk-WARNING **: nm-applet: Fatal IO error 2 (No such file or directory) on X server :0.
    3764
    3765
    3766 (gnome-screensaver:1452): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server : 0.
    3767
    3768 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
    3769
    3770 (gnome-settings-daemon:4503): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    3771
    3772
    3773 (gnome-terminal:4345): Gdk-WARNING **: gnome-terminal: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    3774
    3775 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
    3776
    3777 Received signal:15->'Terminated'
    3778 OK
    3779

    There is one thing I forgot to clarify, have setup up the pc as a server so I do not have direct access to the server. Everything is forwarded over ssh (using nx to connect to the server and start a gnome session). Starting KiTTY (a modification of PuTTY) with x11 forwarding I do not see any windows when I run "xinit -- /usr/bin/X -nolisten tcp". I get the following:
    X.Org X Server 1.12.3
    Release Date: 2012-07-09
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.4.4-3-ARCH x86_64
    Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
    Kernel command line: root=/dev/sda1 ro
    Build Date: 09 July 2012 03:59:39PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:47:36 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    xinit: Unable to run program "xterm": No such file or directory
    Specify a program on the command line or make sure that /usr/bin
    is in your path.
    xinit: connection to X server lost
    waiting for X server to shut down .Server terminated successfully (0). Closing log file.
    startx gives something similar:
    X.Org X Server 1.12.3
    Release Date: 2012-07-09
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.4.4-3-ARCH x86_64
    Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
    Kernel command line: root=/dev/sda1 ro
    Build Date: 09 July 2012 03:59:39PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:52:11 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    /etc/X11/xinit/xinitrc: line 52: twm: command not found
    /etc/X11/xinit/xinitrc: line 53: xclock: command not found
    /etc/X11/xinit/xinitrc: line 54: xterm: command not found
    /etc/X11/xinit/xinitrc: line 56: exec: xterm: not found
    /etc/X11/xinit/xinitrc: line 55: xterm: command not found
    xinit: connection to X server lost
    waiting for X server to shut down .Server terminated successfully (0). Closing log file.
    I remember when I would start the pc that startx I could never get to run, I would always start the gui using gdm, which was the only thing I could get to work. I do not have a .xinitrc. I believe the nx connects and issues gnome-session to start the session but I am not sure.

Maybe you are looking for

  • How can I quickly rename a group of files (not batch)

    I've seen answers to the "batch" renaming.  My situation is a little different. I want to change the names of a bunch of files, but there is no pattern to the changes.  It's somewhat cumbersome right now to click on each item, then wait a second, the

  • Address Group into Mail

    Since I installed Snow Leopard, when I go to my mail to send a New Message I used to be able to open the address book in New Message to put in my group mailings with one click. Now that doesn't work. It only takes the 1st name in the group. Now What

  • Running  .nsi file from java

    hi, Ho to run .nsi file from java. thanks in advance.

  • Mail-separate account-add a Sent folder

    I'm using my new iPad mini. In Mail, I have my .mac (or .me, or icloud) account set up fine and there is the usual array of folders, such as in, junk, trash, sent, etc. but I have a second account using my local ISP, and though I am able to get and s

  • I keep getting a Try Again message when starting PS

    A Adobe box pops up and says: "Try again Unable to start your subscription for Adobe Photoshop CC Please wait a few moments and try again" I have tried repeatedly all afternoon and evening.  Bridge seems to work, however.