Initialize Delta Process without data transfer

Dear Gurus,
I am facing a problem when I try to "initialize Delta Process without data transfer" an ODS.
I first deleted the initialization request in Scheduler->Initialization Options for Source system and then I executed the Infopackage.
The status of the new init. request is red and I get the following error message :
Request REQU_DMJI1J66397EM5OZMC1EQJLWZ (192.384) for DataSource 8ZSALETXT from source system PW1CLNT600 has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object.
This is not possible because the sequence of requests has to be followed.
Delta- and init requests have to be updated to the DataStore object in the request sequence.
The problem is that I can't find this request (REQU_DMJ...) anywhere.
Could you please explain me what to do with this issue and tell me if it is possible to make the system just ignore this request ?
Thank you in advance
Fabien

Hi............
U r not able to find REQU_DMJI1J66397EM5OZMC1EQJLWZ in the Manage screen of the ODS right?.........
Go to RSRQ...................give this request number and check...........if the Status is green........in the Header tab check whether the load is till PSA or not............if it is till PSA............then go to the Status tab and click on Process Manually to push the request in the target........otherwise just make the QM status red here..............then do the load.......
Regards,
Debjani.........

Similar Messages

Initialize Delta Process with Data Transfer - Split the job in two/three

Hello,
I am trying to load master data into BI (DEV) and there are 700,000 master data records in my source system. When I tried to load Initialize Delta Process with data transfer, at some point (after 300,000 records) my load failed in source system and job log I found that this issue "ABAP/4 processor: TSV_TNEW_OCCURS_NO_ROLL_MEMORY"
When I informed this issue to BASIS consultant, they suggest me to split the job in 3 (Three). My question: how can I split the job in three? I can do one Initialize Delta Process load and followed by delta load.
Regards,
Md

Hi Md.
Even at Infopackage level you can reduce the number of records per package.
Go to Infopackage Schedular Menu -> DataS. Default Data Transfer. you can reduce the Maximum size of a data packet in kByte.
Regards,
Pratap Sone

DTPs - Delta Init without Data transfer.

Hi All,
I am implementing the DTPs in my project where we replicate the old 3.x extractions with the bw7x functioanlity;
Can anyone tell me if their is way to implement the "Delta Init without Data transfer" scenario with DTPs for
both R/3 to BW(ODS) extraction or for the Datamarts - ODS to Cube within BW??
Thanks in advance!
Cheers
Rao

Hi Rao,
Yes u can achieve Initialization without data in BI 7 DTPs.
Goto ur DTp's Execute Tab, and Processing mode there drop down the list and select No Data Transfer,Delta Status in Source: Fetched.
Assign points if helpful.

Error when perform init delta process (w/data)

Hello all!
when i perform init delta process (without data transfer), i am receiving the follow message:
SUBRC= 2 The current application triggered a termination wi
Recently we upgrated to SapNetWeaver 7.31 (before was 7.0).
Is there anything that i need to do to execute a init delta (without data transfer)?
SPK 731 LEVEL 10.
thanks.

Hi,
What data source and at which server you doing this?
Can you check your extract structure(source system side) was active or not?
replicate your data source into bw and activate it.
later try to do init without data transfer.
Thanks

Initialize delta without data transfer not possible

Hullo,
I want to switch the upload procedure for an ODS from full to delta. For I have researched SAP Note 689964 and executed the program RSSM_SET_REPAIR_FULL_FLAG for the ODS-object and datasource. It successfully modified the request and set the 'REPAIR_FULL' flag.
Now I want to change the InfoPackage from Full update to Delta. According to the note I have to perform an init simulation, my problem is that the option initialize delta without data transfer is in display mode only (i.e. it's gray and I cannot select it).
The InfoSource in question is "0HR_PY_1". I've checked several others and with some it is possible to select the initialization simulations and with others it's not.
My questions are a) Why is it this option grayed out? and b) What can I do to enable the selection of this option?
Any help is appreciated.

Hullo AK,
thanks for pointing out that note, sadly it's for "0HR_PY_PP_1" and not "0HR_PY_1".
However it lead us to note '611199'...
Symptom
Some attributes of the following DataSources are not defined.
0HR_PY_1 DataSource:
- Commit after initialization phase
- DeltaInit Simulation
0HR_PY_PP_1 DataSource:
- Commit after initialization phase
0HR_PY_PP_2 DataSource:
- Commit after initialization phase
Other terms
PXDW, extractor, posting transfer, settlement, PCPO, PCP0
Reason and Prerequisites
The SAP settings for the DataSources are incomplete.
The following attributes should be set:
0HR_PY_1 DataSource:
- Commit after initialization phase: no commit
- DeltaInit Simulation: Mode is not supported
0HR_PY_PP_1 DataSource:
- Commit after initialization phase: no commit
0HR_PY_PP_2 DataSource:
- Commit after initialization phase: no commit
Solution
Import the corresponding Support Package into the Plug-In Releases 2003.1 and 2002.2 and copy/activate the DataSources in the plug-in system again.
If the correction is imported, you can no longer select the "DeltaInit simulation" option for the delta initialization of the 0HR_PY_1 DataSource/InfoSource.
As long as you have not imported the correction or you are using an even older plug-in release, you should never select the "DeltaInit simulation" option during the delta initialization for the 0HR_PY_1 DataSource/InfoSource. The 0HR_PY_1 DataSource does not support this mode.
The 0HR_PY_1 DataSource only supports the delta initialization (without the DeltaInit simulation) and subsequent delta calls.
Sadly enough, not what I wanted to read, but well at least I now know that I shouldn't look into this solution anymore.
Again, thanks for your help.

Initialization without data transfer

Hi bw experts,
when i am loading data to ods 0fiap_o06.actually i loadded selection wise data in same infopackage for full update .after that when i try load initialization without data transfer iam getting this error
1.Full updates already available in DSO 0FIAP_O06 ; Cannot update init./delta     RSM     98
2.Activation of M records from DataStore object 0FIAP_O06 terminated     RSM1 102
after that i tried. iloaded first initialization without data transfer then i loaded full update this time these error is coming.
1.Full 1,848 has overlapping selections with init. 0000001844 : No updates into 0FIAP_O06     RSM     94
2.Activation of M records from DataStore object 0FIAP_O06 terminated     RSM1     102
right now iam doing in quality system before going to production system ,i would like to selection wise data bcoz this is huge data.can any one suggest me how to proceed this .
regards
RK
Edited by: rama krishan on May 12, 2008 12:04 PM

Hi,
Initially Just do Initialise Delta Process.....
Do not select anything (Initialise w/o data transfer (or) Early delta initialisation)..
After loading Do Delta Update
We are successfully working on this...
I think first do the following things..
1. Delete data from the Cube.
2. Load INIT
3. After completing INIT -- Do Delta
Now you will not have any problems..
Hope it works...

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

Does "Init without data transfer" creates delta queues?

Does "Init without data transfer" creates delta queues?

Hi,
Yes, Once initialization successful for particular source system, you can see entry at Delta Queue(RSA7).
Hope it Helps
Srini

How do I "Init without data transfer' using 7.0 transformations and DTP's?

I have a data-mart situation where I have a standard DSO object that sends deltas up to a standard cube. This data flow is created with 7.0 transformation and a delta type DTP and has been running fine.
I now have a new single activated request loaded to the DSO object but I DO NOT want this request to delta update to the cube. In 3.x, I used to go into the init infopackage, manually delete the initialization pointer, and run a 'Initialize Without Data Transfer' to make this work. Deltas could then continue as before.
I do not see a way to do this using 7.0 transformations and DTP's. I want to reset the init from DSO to cube so this request does not get updated. Does anyone have step by step ideas on how this can be accomplished?
Thanks in advance for any help on this issue.

Hi,
delete the data in the cube by using oprtion selective deletion based on request number.
(if delta request is deleted from cube, with next load last delta records will also come)
in this scenario there is no need to delete initiaizations option.
in BI 7.0, initialization load is not there.
see below documentation on DTP in SAP help.
"On the Extraction tab page, specify the parameters:
a. Choose Extraction Mode.
You can choose Delta or Full mode.
In contrast to a delta transfer with an InfoPackage, an explicit initialization of the delta process is not necessary for the delta transfer with a DTP. When the data transfer process is executed in delta mode for the first time, all existing requests are retrieved from the source and the delta status is initialized. "
Link: [http://help.sap.com/saphelp_nw70/helpdata/EN/42/f98e07cc483255e10000000a1553f7/frameset.htm]
Regards
Daya Sagar

Init without data transfer is not working in the Production box for FICA extractors

Hi Guys,
We are unable to do Init without data transfer for FICA Extractors(0FC_INVDOC_XX) from BODS system. And the job is successfully completed from the BODS end but it is not hitting the source system.. Can any one please let me know how to resolve this issue.
Thanks,
Kovur

Hi,
After triggering your info pack with init without data transfer, are you able to see delta pointer at info pack-->scheduler--> init options source system.
Are getting any error message? if yes then please share here.
Thanks

2LIS_11_VAHDR - Initialize delta process error

Hi,
I have an issue initializing infosource 2LIS_11_VAHDR for delta process on a new BW3.1c instance created from a system copy. Other delta loads work properly but not this one.
In the AWB monitor, the status indicates 'no data available' even if the source system LIS setup tables have been recreated with some records available. What's more puzzling is the fact that the error also indicates that 'the data request was a full update' even if the update mode is set to initialize delta process.
Any tips would be appreciated.
Thank you,
Frank

RSA3 simulated 0 records but the R/3 table had plenty of records to be processed.
But what resolved the problem was deleting and re-creating the BW infopackage and re-initializing the delta process.
Thank you all for your time.
Frank

Init without data transfer

Hi sdn
my data is going form ods to cube and i already done full update from Source system now we want to do init without data transfer but when I'm seeing in monitor then requst is running for 5 hrs still yellow and when i cancell that request then run it again the when I press start load button then it ask me for ods activation for all request and for one request i had tried either way but didn't got successful, what to do we are using generic datasource
rubane

Hi,
I think you are doing data upload to ODS .
In the seetings of ODS Select Automatic Activation.
Since you have cancelled the data upload,So delete the Data from the ODS . And then Do Delta init with out data transfer .and then do full upload. But when you are doing full upload you have to make it as Repair request. And then continue Delta loads.
Once Delta init (with out data transfer) and Full upload is over to ODS ,you can start Delta init upload to Cube.
With rgds,
Anil Kumar Sharma .P

For Init without data transfer showing records 0 from 0

Hi all,
Iam doing Init without data transfer to ODS. In the ODS manage it is showing 1 from 1 which is correct. This ODS data is automatically updated to a cube. There in the cube manage it is showing 0 from 0. My mappings in update rules also correct , but why it is not giving 1 from 1.
In the cube manage the status is showing green but in the monitor of cube always it is yellow.
Help me please
Ram

Hi Ram
If you load data with INIT without data transfer then system shows the defualt record in the monitor.
If check that record in the PSA then you dont find it and on the cube as well.
If the load is green with 1 record then extractor working fine.It's not actaully a data reocrd.
Hope it helps...
Regards,
Chama.

Increase of work processes for data transfer for specific tables

Hi,
We are using TDMS for transfer of around 1 month's data from our ECC Quality system to ECC test system. The test system was built using shell creation and the transfer started.
We have allocated 13 batch processes in the central system and reciever system. There are currently two tables for which transfer is running. The transfer is completed for all other tables. But eventhough there are 13 processes available, there are only 3 processes allocated to one table and 2 processes allocated to another table for transfer.
Since the time is dependent on the complete transfer of these two tables and since there are 8 free processes available, we would like to assign the remaining processes on these tables so that the transfer is faster.
Please guide me if there is any way to change the same.
Regards,
Ragav

Hi,
Thanks to Sandeep and Pankaj for the replies.
I've started data transfer in CRM landscape and in that i was able to define the read method, write method and change some technical settings for transfer.
In the Technical settings for transfer option, i was able to increase the parallel transfer batch processes to be run in parallel.
Regards,
Ragav

Error while processing "Prepare Data Transfer"

Hi all,
At the Processtype ERP Initial Package for HCM Personnel Administration (PA) I start the stept "Prepare Data Transfer". This step abort at the point "Generate Conversion Objects" with the error message: Subactivity PC002_MT_RT_GEN task 000001 ended with errors. In the detail view I get some Errormessages like this:
Error while generating runtime objects for Z_ASSHR_005
Syntax error in function module /1CADMC/IL_001000000045091
Error message: Feld "IM_PERNR" unbekannt. Es ist weder in einer der angegebenen Tabellen enthalten noch durch eine"DATA"-Anweisu
Error while generating runtime objects for Z_PA2001_005
Syntax error in function module /1CADMC/IL_001000000045088
Error message: Feld "IM_PERNR" unbekannt. Es ist weder in einer der angegebenen Tabellen enthalten noch durch eine"DATA"-Anweisu
The Note 0001486384 TDMS4HCM: SP04 - Note 12 - Syntax errors in generated Incl's is already implemented.
Can someone help me to solve this Problem?
Kind Regards
Florian

Hi,
Did you create a new sub-project and then create a new package and
execute the TDMS transfer?
I think this might be the issue.
Try creating a new subproject and package .This should solve the issue.
Thanks,
Poonam.

Initialize Delta Process without data transfer

Similar Messages

Maybe you are looking for