Initialize loads for all Purchasing extractors w/o affecting delta for SCL

Hi Gurus,
I have to initialize and start the loads for all the Purchasing extractors except the Scheduled Line Item extractor which is already running. I have to make sure I am not disturbing the daily delta for the Scheduled Line Item(SCL) extractor while initializing and running the other loads for Purchasing. How do I get this done.
Any help is deeply apprecited and will be rewarded with points.This is pretty urgent
Thanks

Hi John,
You can go ahead with the following approach:
I am assuming that the type of delta that u use here is queued delta. This can be viewed in transaction LBWE (Under purchasing (02)).
When you are dealing with LO cockpit extractions, make sure the extraction queue (LBWQ) and delta queue (RSA7) show up as either 0 records or dont list up in the specific transactions.
For example, if there are entries in LBWQ against MCEX02, this means the scheduling extractor still has some data in the extraction queue which needs to be moved to delta queue (RSA7) and then pushed to BW.
Make sure when transports go to production, there are no entries for delta either in LBWQ (check entry MCEX02) or RSA7 (check entry 2LIS_02_SCL). If not do repeat the following process until both of them are empty. Only then release the transports.
1. In LBWE, click on job control for 02 (Purchasing). Click on Start date. And select immediate and save. Come back to job control screen and schedule job. This should move data from extraction queue (LBWQ) to delta queue (RSA7).
2. Run the delta infopackage for scheduling item on the BW side. This would clear the delta queue.
Do the above process continuously until you see MCEX02 does not show up in LBWQ and no entries in RSA7 for the specific scheduling extractor.
Then you would be on a safer side.
A better approach here would also be to get to know a no-posting zone, where you migght get less postings.
With Best Regards,
Hariharan. M

Similar Messages

Make movement type relevant for BW Purchasing Extractor

How do I make a movement type relevant for a Purchasing extractor? Specifically 2lis_02_SGR.
The SAP functional team (I am on the BW team) started using movement type 161 and 162 for goods receipts. They set up the movement type in OMJJ in ECC. But it does not flow into BW via the 2lis_02_SGR extractor.
I went into the Transaction Key for BW and added 161 and 162 and now they show up in the table - V_TMCLVBW / TMCLVBW, but they are not flagged as statistically relevant. I have tried to go to tcodes MCB0 and MCB_ but get an SAP error "
View/table V_TMCLBW can only be displayed and maintained with restrictions
" and I do not know what this means or how to get past it so I can edit the table.
I have tried resetting up the initialization tables for Purchasing, but the movement types still do not come in the extractor. I think this is because the table still does not have these movement types flagged as statistically relevant.
Thanks
Jeff

I have gotten a developers key, so I was able to make V_TMCLVBW editable via MCB_ but this still brings me back to the change view for transaction key maintenance for transfer into BW. But I still can not figure out how to make the movement types relevant for BW.

HT5787 Change apple id for all purchased apps...

I want to change apple id in my iphone as my old apple ID's password is not working. Please help me. I want to change apple ID for all new and old purchases.

Have you tried logging out an back into that account on your phone (tap on it in Settings > iTunes & App Store), and/or tried getting the password reset for it : http://iforgot.apple.com (if you do get the password reset then you might need to logout and back into it) ?
If you create a new account then that will work for new purchases, but all of your existing downloads will remain tied to your old account, so only your old account will be able to redownload those purchases and/or download updates to its apps.

BID Invitation after create is avaiable for all purchase groups

Hello,
    I need help to solve the follow problem:
    I created a BID using item from a SC, the data is normal, but the BID is visible by all purchase groups.
    I tried fill the field source_rel_ind in table bbp_pdigp with 'X', but the problem persists.
Roberto Aran.

Hello DInesh,
      I found a solution for this case using the BADI BBP_AUTHORITY_CHECK, this BADI verify each purchase group of each document and with the control of sy-subrc i can hide de document for the purchaser.
      Thanks for help me.
Regards.
Roberto Aran.

MRP reports for all Purchase Requisitions

I want a SAP standard report that will give me a list of all Purchase Requisition created via MRP run, it can also include manually createed PR's. The main aim is for the Materials Mansger to view all PR's, even if he/she don't have the authorization to release it.

Doesn't standard transactions (ME55, ME5A) suit your requirement?

Why are ringtones not available for all purchased songs?

does anyone know why you can not make a ringtone from all purchased songs? e.g., none of the songs I'e downloaded from The Beatles may be made in to ringtones.

I am having no problems with the HBOGo app on my iPad. Try quitting the app and then restart the iPad.
Go to the home screen first by tapping the home button. Quit/close the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the HBOGo icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, try a reset of the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

ABAP/4 Keywords for all SAP R/3 Versions with Delta Documentation for abap

Hello Experts,
Do please provide me with the way to find out the Delta Documentations for ABAP for all version of SAP R/3 starting from 3.0 to 6.0
points will be awarded if helpful.
Thanks in Advance

Log on to SAP. Use transaction ABAP_DOCU. Click on Keyword Help. Don't enter an ABAP keyword, press cont. button.
In the window that opens, in the tree on the left handside, you'll see ABAP Changes By Release.
This contains all the information you need.
matt

Enable save for all users in rich client document defaultly for all users

Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
Karthik

I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

Creating PIE Chart in ABAP for all Purchase Orders in a particular week

Hi All ,
I want to create a pie chart based on the value of purchase orders in one week .
Kindly guide me as to how to create a pie chart.
Warm Regards
Anirban Basu
+ 919836477442

Hi Vivek ,
Thanks for your response . However I am not able to identify which parameter you want to set as PI .
can you kindly attach an example.
Regards
Anirban

ITunes connection reset for all purchased content - won't download!

Hello,
I see many archived messages about this issue, however, it is a new problem for me. I have until now been able to download entire Seasons of shows without an issue, without interruption. Now, a single half-hour episode in standard definition fails.
Suddenly, any purchased content in iTunes - movies, TV shows, etc. - will not download into my Library, and I get a "network connection was reset" error. I am running iTunes 11.1.5 on Mavericks.
Recently I purchased & installed MacKeeper. I know it is a long shot, since this appears to be a network issue, but it is the only "change" introduced in recent weeks.
Hoping you can assist.
Thank you.
Anne Mowat

Well, I am very doubtful the issue was ever ISP related - I am not on Comcast nor even on cable (fioptics phone). And several other threads show many different ISP's across the globe were involved! Hence Apple Support seems to have indeed been trying to offload the problem... especially in light of what happened to me today!
I just upgraded to iTunes 11.2 and OS X 10.9.3 with the same positive results as harrharr's post, with either or both updates fixing the problem!
I downloaded 3 large movie files (make that 5 as 2 more just finished as I edited this!), each about 1GB in size with "Allow simultaneous downloads" on. All files finished on their own!! I haven't even come close to these results this week with the last movie I downloaded Wed taking over 15 restarts to finish! Now, I could be off to a lucky Fri, AND it could be either the iTunes or OS X update that fixed it (installed both at the same time so can't determine which one did it). Either way, it appears to be fixed and as I suspected the problem was on the Apple side, not anything I did with my router or any change from my ISP. Fingers crossed!
That said, if it is fixed, shame on you iTunes and Apple Support! Why do you continue to either (1) be so out of touch with your own products (developers not sharing what they are fixing?) or (2) so secretive admitting something you have might be broken and you are working on a fix! So darn frustrating...
So try iTunes 11.2 and OS X 10.9.3 updates and see if it works for you too!
Kevin

How One Buyer can have access for all Purchasing Groups in classical scena

Hi,
We are Working in SRM 3.0 classical scenario and we had a problem how we can assign a One Buyer to multiple PO groups.
Though we are doing the SAP Code modification, we are not able to see the functionality of Assign to me or Work List functionality once we are claering the Purchasing Orgs.
If you have any idea which part of SAP code we can change to achieve this.
Thanks on Advance.
Murali

Hi,
See the foll threads:
Re: Purchasing Group and User Assignment
Multiple Purchasing Groups to One Person
SRM 5.0 - Assign user to multiple purchasing groups?
Assign puchaser user to multiple Purchasing groups in PPOMA
Multiple purchasing group responsibility?
BR,
Disha.
Do reward points for useful answers.

Output messages for all purchasing documents....

Hello friends,
Assume that i have created one P.O., it should be delivered to a vendor X through fax, vendor Y through mail, and vendor Z via EDI. Where i have to do all these settings per vendor.
Please give me some suggestions.
With Regards,
Mohan

Message Type for PO
1) No need to create new Z output type
2) Output Type as NEU
Partner Roles
3) just add medium as External Send and function as VN.
Maintain Condition Record for the EACH Vendor.
Regards,
eswarmanu...

"HDCP content won't play on this display" error for all purchased content after upgrading to Yosemite

Using my 2013 Mac Pro with a 27" Cinema Display, I'm now getting an error that tells me that my display isn't authorized for HDCP content.
This is the same machine I've been using right along to watch my iTunes content with no configuration or hardware changes... the only difference is the switch to Yosemite and the accompanying iTunes upgrade.
I've tried the basics - rebooting, reconnecting the display etc - but based on the circumstances it feels more like a bug than something I'll be able to impact.
Anyone?

The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

I am trying to figure out how I can have a "main" itunes account for all purchases, but have seperate accounts for my children so they can use iMessage and other features of iPod touch. Also, they would be able to download free items.

Can you have one install of iTunes on a PC or Mac, but have multiple Apple IDs tied to it?

You can't have multiple IDs associated with an itunes account, but you can have one ID one 1 device and another one, but currently its impossible to merge accounts.

Once and for all: Do I need anti-virus software for my Mac?

I've always heard that you don't really need anti-virus or anti-spyware software for Macs - but I do wonder that there has to be viruses about that would affect Macs?
I do alot of creative and professional work on my Mac. The data on it, means a **** of a lot to me, and I'd hate for my Mac to be infected with something horrible.
Could anybody please tell me if I really do need anti-virus or anti-spyware software for my iMac? And if I do, which one do you recommend? (Ideally I would want it to be cheap and not hog lots of system resources)...
Thank you!

Hi
I can only give you my personal experience on this one.
The short answer is "no". I've been using macs for the past 4 years, my partner for many more. Neither I nor she have an anti virus program installed.
We both use firewall on both the os x setup and via our router. I tend to install the security updates posted by apple after they are released and check the forums to be aware of any potential problems.
A much better idea is to back up your important projects etc on a regular basis to dvd and external hard disk.
I have one experience of anti-virus software on the mac:
About 2.5 years ago i thought i had a virus - my diskspace was being eaten up at a very very fast rate - and i was worried. Found out that the os update from 10.3.2 to 10.3.5 had an incompatability issue with the mcafee shock game controller driver (obscure eh!)
Anyway, after this experience and deleting the driver which i no longer needed, i decided to err on the side of caution and tried out both mcafee and norton. Both of which slowed down my system and norton especially caused problems when i was running logic pro etc. really really annoying.
Once i'd got over my "insecure" stage and having spoken to other mac users i realised anti-virus software was causing many many more issues than resolving any - and besides since then i have still had no problems and have never come across any viruses on mac os x.
It all depends on what makes you feel safer. Personally i wouldn't recommend ant-virus programs... i wonder if anyone has any positive experiences of anti-virus software on the mac?
that's my 0.02 pence

Initialize loads for all Purchasing extractors w/o affecting delta for SCL

Similar Messages

Maybe you are looking for