Initialize Report dynamically using DataSet. Please Help!

Post Author: olstar
CA Forum: Integrated Solutions
Hi!
In my ASP.NET (2005) application I have a web service that returns a DataSet. I would like to use Crystal Reports to show the data from this DataSet. Please let me know if this is possible.
Thanks a lot for your help!

Post Author: pepsi
CA Forum: Integrated Solutions
Hope you have the crystal server set up. use opendocument.jsp to create a link for the desired report and set this link as target from .net user interface.

Similar Messages

I can not activate my iphone and is reported as "unknown Device" , Please help.

I can not activate my iphone and is reported as "unknown Device" , Please help.
<Personal Information Edited by Host>

Hi Sergius1986,
I'm sorry to hear you are having issues activating your iPhone.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Troubleshooting activation issues
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore.
If you're still experiencing issues, contact your carrier to check for any network or account issues that could cause this issue.
I hope this information helps ....
Have a great day!
- Judy

HT1222 I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me

I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me
When I logging there it told me that maximum no of iCloud's Account already activated on this iPhone.
Please help me how can I open new iCloud's account on this iPhone
Regard
Faiz khan

Set up the account using a desktop or laptop, then sign
into that account on your iPhone.
I am not aware of any method around the restriction once
the maximum has been created on any individual iPhne.

HEY, i have some issue i am using macbook air i5...the problem is that without doing anything 1.5gb of ram out of 2gb always in use ..please help me how to make it normal.

HEY, i have some issue i am using macbook air i5...the problem is that without doing anything 1.5gb of ram out of 2gb always in use ..please help me how to make it normal....
and my battery back up is max 3 to 3.5 hours in normal use with web ....is this normal or need some betterment!!!!

ADEEL UR REHMAN wrote:
...the problem is that without doing anything 1.5gb of ram out of 2gb always in use
No computer can do a thing without using memory. 1.5 GB is very little. It's normal.
3 or so hours from a full charge may also be normal, for what you are doing. As batteries age, they don't last as long on a full charge as they did when they were new. All batteries eventually wear out, and are easily replaceable.

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How can i access to iCloud to my iphone because it appear to the screen of my iPhone when i try to access my iCloud that the maximum number of free account have been use already please help me

how can i access to iCloud to my iphone because it appear to the screen of my iPhone when i try to access my iCloud that the maximum number of free account have been use already please help me

Welcome to the Apple community.
Once three iCloud accounts have been created on any iOS device, it can you no longer be used to create any more accounts, regardless of what you do to it. You will need to use a computer or another iOS device to create your account and then use the details to log into your account on your phone.

An app counting minutes and data use. Please help!!!

An app counting minutes and data use. Please help!!!

Here's one, there are others in the App store:
http://itunes.apple.com/us/app/data-usage/id386950560?mt=8
However, since your carrier is the one that bills you, the only stats that matter are your carrier's. Some carrier's offer apps that provide this info, see if yours does.

How to port a ABAP report into ITS? Please help!

Hi Experts,
 I have a ABAP report that contains a selection screen with 3 select-option elements and a search button. On pressing search button an ALV grid opens with data from a SAP table based on selection screen criteria.
I want to web enable it so that it can be accessed from Enterprise Portal. i will be using IAC iview in Portal.
Now the IAC iview needs my ABAP report to be ported to ITS?
1.How to port it to ITS? What are the steps?
2.In order to port in to ITS do I need to change my ABAP code?
3.Are there any known limitations of porting ABAP reports in ITS? For example Performance, ALV not supported, Table control not supported etc.
4. Does it handle dynamic programming?
5. Are there any documentation for porting report to ITS?
6. How much time effort it will be for porting ABAP reportys to ITS?
To add some more points. SAP transaction iview is not allowed in my organization. Webdynpro/BSP is also not supported. Thats why I am using IAC iview which needs ITS.
Please help
Thanks
Gopal
Message was edited by: gopalkrishna baliga

hi,
step1.create a transaction for ABAPreport in SE93.
step2.Go to transaction SICF and create a service in the following path sap/bc/gui/sap/its.
Check the following Url to create a service.
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
step3. create a system object setting the following property categories.
 1.Connector
 2.Usermanagement
 3.ITS
 4.WAS
In the usermanagement do the user mapping.
step4. While creating an IAC iview, in the third step for the Internet Application Component (IAC) property give the service name you have created in SICF.
you need not change the abap code. The only limitation while porting abap report in ITS is you cannot view the icons in the tool bar, instead you view the buttons.
ALV is supported. Functionality wise nothing will change except the appearance mainly with the icons.
Regards,
Gopi

Create Crystal Report Dynamically using XML based design metadata

Hi,
I have a CR Report Development environment. Please refer to workflow and requirement description below;
I have a Java application(Report Customization Tool), which allows users to dynamically select structure and content for a report.
The process goes as follows:
1. In Java Application, user first gets option to select Report Header, Page Orientation, Font etc for master report.
2. User can select a sub-report (pre-developed report frames. Not Sure about tool.) and apply the same format option (mentioned in step 1, except orientation) to it.
3. User can select individual row/data cell to be displayed on the report through reference to DB tables in sub-reports.
4. There can be N number of sub-reports each with independant formatting, data and data layout that could be integrated in single report.
5 Once all selection is done, Java code generates an XML with all this info.
Now, my requirement is dynamically write CR report based on this XML. I am not using BO enterprise, hence RAS SDK is out of scope. This report will be called thorough stand-alone .NET application in CITRIX environment.
Can we do it in CR XI/CR 2008?
Please feel free to comment in case you need more info. But I won't be able to post screenshots. NDA of course!
Thanks in advance.

I moved your post to the NET - SAP Crystal Reports forum.
To start, you have a fair bit of work ahead of you. The Crystal reports SDK will not do the job. You will have to use the InProc RAS SDK which is included in both CR XI and CR 2008. I'd recommend going with CR 2008 as CR XI R1 (11.0) is out of support now and CR XI R2 (11.5) will be out of support come June of 2011. Next, make sure you have applied SP 3 for CR 2008:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
As an FYI, all files can be found on the downloads page:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Next, you want to read up on RAS. I suggest the following:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050afe0-2fa5-2b10-658d-98f214ba6a4a
http://help.sap.com/businessobject/product_guides/boexir31/en/rassdk_net_dg_12_en.chm
Samples are here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples
and here:
http://www.sdn.sap.com/irj/boc/samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375 [original link is broken]
I also find this 3rd party link useful:
http://book.soundonair.ru/sams/
And as always, search these forums. Lots of info here. E.g.;
Programaticaly add Table in CR database fields
InProc RAS Issue
Adding the columns dynamically in crystal report
Also, see the search box at the top right of this page. It searches blogs, wikis, Kbases, articles and more - all in one go.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problem in web enabling ALV ABAP report via ITS. Please help!

Hi Experts,
I have a report that has a selection screen. On executing the selection screen an ALV output loads displaying data based on the selection criteria.
I have web enabled it via ITS. I have used SICF transaction.
When I run the internet service I can see only the selection screen. There is no execute button also. I also see a different layout then if my report has only selection screen. If my report has only selection screen then my page shows all the buttons including execute.
How to resolve this problem? Please help!
Thanks
Gopal

since you mentioned about SICF, i assume you are using integrated ITS.
When I run the internet service I can see only the selection screen. There is no execute button also
you wont see the execute icon, instead you will see a button with "execute" text. (you can also use F8 key)
I also see a different layout then if my report has only selection screen. If my report has only selection screen then my page shows all the buttons including execute.
the layout of SAPGUI for HTML is slightly different, if you want (somewhat) similar look of a wingui, either make your transaction as "Easy Web Transaction" or in the url pass ~webtransactiontype=EWT
as a test can you run the following url and see how it looks.
http://waserverhost.domain.com:port/sap/bc/gui/sap/its/webgui?sap-client=<clinetno>&~transaction=<you reports transaction code>
Regards
Raja

Report Printing Issue ,. Please help

I have report query and when testing the report I get the following error. Can someone please help with necessary steps.
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Thanks
George

All,
I think there are now a number of issues discussed in this thread, so here are a few clarifications:
- If you use BI Publisher as the print server, then you can access BI Publisher through a URL, this URL along with the configured port was supplied during the install. It is also listed in the documentation. It's typically something like this:
http://yourhost.domain:port/xmlpserver
- If you use another print server (Apache FOP, Cocoon, etc), then it depends on that server whether or not there's a browser accessible configuration utility, e.g when using Apache FOP along with Oracle OC4J, then the URL would be something like this:
http://yourhost.domain:port/em
This takes you to the "Enterprise Manager" for OC4J from where you can deploy the war file and also review the log files to diagnose potential issues.
- Regarding the RTF vs XSL-FO question, for new users I would recommend using report regions along with the burned in generic, configurable report layouts first, and see how far that gets you and only if you need further customization I would recommend using XSL-FO templates. And when doing so, start with the generic XSL-FO templates, because they are being pre-populated, so you won't have to start from scratch but can modify existing templates.
Regards,
Marc

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Report alignment issues..please help

Hi Experts,
Can somebody help..
I have following issues in reports:
.I have a report which runs on web in both formats of PDF's and Excel
Issues are
1. In PDF formatl, all columns are being displayed but alignment is the issue.. Since our report should be A4 based. How to increase paper margins..because currently i am not able to drag that black thick coloured line further..? where to adjust and change report layout size..
2. One more thing is that when i run the pdf report, it starts printing from left without leaving any gap(landscapre mode) and its leaving lots of space on the right.. How can i make equal of both left and right margins.
3. When I am running excel report and its rnning fine saving in a xls.. but alignment is the issue...
4.some of the values which are varchar2 data from database... displaying right and some are left aligned.... for example.. if its ABCD then its aligning properly to right. But if it is EFGHEIJK the its doing left alignment... there is no code written for conditional formatting..but what could be the issue.. since the values are direct from table in database..why this is happening
5. and In excel there is a data column which i manipulated as for example to_char(to_date(20100217,'yyyymmmdd'),'dd-mm-yyyy') and this is coming properly in pdf but not excel..in excel its says something like17-02-10,, yYYY is being displayed only as 10... is there any workaround (not manual))
6. And in reports, if we create a field and database column is source for it, i would like to know whether there is any option in property column of the field to set width of the filed..
so that i can reduce of the width in layout to acommidate more column in the report. Because I really not knowing for 8 character database column, how much bigger field i have to create.....
please help..
thanks
asp

Wow Sridhar, that was quick
Vj

My macbook pro all of the sudden shuts off and when I turn it on it says it shut off due to an error and then it tells me if I want to ignore or report the problem. Please help? I've barely got the pro in August..

MY macbook pro shuts off by its self. Then when I relize it and go to turn it on a white screen appears saying it shut off due to an error. Then a little box pops up and says if I want to report the issue or ignore it. Please help I got the computer in August.

Your warranty includes 90 days of phone support. Call AppleCare.

Initialize Report dynamically using DataSet. Please Help!

Similar Messages

Maybe you are looking for