Initialize section in Functional Tester, like in Openscript?
Hello,
Is there any way to make an "initialize"-section in Functional Tester, like in Openscript?
We are creating a script with some one-time-only steps for use in Load Tester.
Regards,
Axel
Hi Axel,
You need to create modular scripts in OFT and then make use of User Defined Profiles in Oracle Load Testing (go to the Manage menu). The Prolog section of a UDP will executed once which is similar to the Initailizse section.
Regards,
Jamie
Similar Messages
-
OpenScript records functional tests, but not load tests on firefox
Hi everyone
I am recording some test with OpenScript 9.3.1.0, I have no problem recording functional tests with IE or FF, but when i try to record a load test just IE works, firefox opens the window and let me do everything normal, but it don't record anything; i'd try with FF 3.6 and 3.5, i'd run the diagnostig tool but it don't show me anything wrong. I hope someone can help me.
Thanks
Edited by: user8874599 on 08-jun-2012 13:45Hi
When doing load testing OpenScript will change your browsers proxy to point to localhost 7777 as its the port that openscript internal proxy uses to record the navigations, can you check if when recording with FF the proxy settings is FF have changed?
If not can you try to change them manually to point to localhost 7777 you will find the settings in Options -> Advanced -> Network -> Settings.
If the proxy is already set, please check that there is nothing on the No proxy for: box
Hope this helps
Alex -
Record and playback of OATS functional testing in multiple tabs
New tabs functionality have been a part of browsers for sometime now. But Openscript doesnot record any action relating to new tabs. Is there a way to modify the code so as open new tabs and switch between tabs during the playback?
This will reduce sufficient time during testing of multiple URLs which share the same cookies.
This is required for Fusion Functional testing.Hi,
I suggest a couple of things:
NI USRP 2920 is a non-calibrated device. So setting a gain value of 0 at different frequencies could mean a different actual gain. So try increasing the Rx recording gain (on the USRP) in cases where you observe low SNR. Similarly Tx is not calibrated.
Is the signal recording done with cables or over wireless medium ? You can try to eliminate any spurious signals if you use SMA cables while recording.
I think the power at the center of the spectrum is the DC offset. You may refer to the DC Offset/LO leakage section in the best practices section here http://www.ni.com/white-paper/13881/en/
Thanks. -
Unit testing, integration and functional testing
Hello all,
I would like to know the difference between Unit testing, integration and functional testing. And also what are the testing tools that are more commonly used?
Thanks,
MaxxHi,
Unit testing :
A complete cycle of each module will be tested
ie for PP Right from requirements to planned orders /production orders
confirmation .
Integration testing:
Here cross module testing will be carried out.
ie PP and MM integration
After confirming production order a GR is made /billing is carried out
and delivered.
Functional testing:
This testing is carried out to see whether the system can with stand l the loads during processing by users.
Stress test and volume test.
Regards,
nandha -
Functionality Testing Using B1 Test Composer Tool
Hi,
I would like to use B1 TC for functional testing of our add-ons. Will it be possible for me to do the functional testing(add-on's expected against add-on's actual) of the add-on using B1 TC? Could anyone explain with some examples so that I can start with B1 TC.
Our add-on has a window that allows the user to filter and display BPs in the matrix. User can select a Payment Term from the drop down and click Refresh button. Then the BPs with matching payment term should be listed in the matrix/gird. Here I want to check whether the BPs listed is correct. How can I use B1 Test Composer to do this?
Regards,
SamHi Johan,
Thanks for the response. Let me explain the scenario to be tested using B1 TC in detail. The Payment Term combo in our add-on's Payment Term Update Utility form will list the payment terms ZPNET30, NET30, -Cash Basic’ etc. On selecting one of these values (say NET30), the matrix in the form is expected to list only those BPs with matching payment term(NET30). Here I need to ensure that all the BPs listed here are having the same payment term as ‘NET30’.
While recording this action using B1 TC, let us assume that the BPs listed in the matrix are as in the below image.
But when I rerun the B1 TC script at some later time, the BPs list might vary because of addition of new BPs to the database or changing of payment term of the existing BPs. In this instance, the Compare Matrix function of B1 TC fails, as the expected matrix values are not the same when we re-run the script. But all the BPs listed will have the matching payment term(NET30). So B1 TC reports a bug even if the functioning of the add-on is correct.
When I manually do the testing, I apply the filter and then load each of the BP Master Data to check whether the payment term matches the selected one in the form. Then I will change and update the payment term of the existing BP or add new BPs and again performs the filtering to check whether the search result is correct. Is there a mechanism with B1 TC to handle such scenario, like accessing each individual rows/cells of the matrix/grid and check the payment term of the BPs listed?
Regards,
Sam -
Advice needed for functional test
My company is releasing a new website with all the bells and whistles. I am looking for advice on specifically what we should test. I know that we want to make sure that the site functionally works, but different people on the team have opinions on what should be tested beyond that. Some people want to check that the pages are exactly the same from run to run, others just want to check text. I would like to see what test teams outside my company are actually doing. Any ideas would be appreciated.
Hello FiveNines,
You don't give a lot of information about your application, so it is hard to give you specific advice...I was at a very interesting IIST seminar last week in Boston and I walked away with 2 major take aways:
1) Negative testing is as important as positive testing. As development typically focuses on positive testing, it's critical for QA to have good test plans in place for this. Most of the QA teams on the room had a 20% negative testing to 80% positive or functional testing, but the goal should be to target more a 50%-50% ratio, if no higher negative testing than positive.
2) When you think about building your Negative testing Test Cases think about 2 areas:
* Invalid data input (like if you expect an integer value, try typing letters., etc, or enter an invalid user account to make sure the application behaves properly, etc)
*More importantly, think about failing pre-conditions. For example, if your application connects to a DB on the back, build test cases to see how your application will handle processing a new user when the DB is down...This really open up my eyes, as when we build our test cases we usually don't think about this type of scenario, and we have been focusing a lot on functionality testing...
I hope it helps -
How to install only OATS for Functional Testing ?
How to install only OATS for Functional Testing for Oracle EBS?
I tried micro installation, but installation tried to install whole test manager/oracle xe db/Weblogic etc..
I want to evaluate how it works, can we leverage for Functional/regression tesitng...
Please advise...
Thanks
Edited by: 956069 on Aug 30, 2012 6:19 AMHello
You should be able to install OpenScript only using the micro install distribution. You can just skip the steps concerning XE & WLS installation/connection.
JB -
Need Permanent Seat license key For HP Unified Functional Testing 11.52
Hi,
I had downloaded and used the trial version of QTP from your HP web site for a 30 day demo. After completing the trial period, I want to require a permanent seat license key that is specific to my PC on which it is installed. Because my work has stopped due the expiration and I had tried many time to find 'EON#' or the order number printed on the Entitlement Certificate that was shipped with my 'LTU or ELTU' package(s). But still I cannot find 'LTU or ELTU' package in my downloaded stuff or in software's folder after extraction/unzip or through installation guide . You can see my software downloaded detail in below. Please reply me back as soon as possible and identify me , where 'LTU or ELTU' package(s) exist or complete procedure with price plans regarding permanent seat license key of "HP [QTP] Unified Functional Testing 11.52 ".
Kind Regards,
Kashif [Personal Information Removed]Thank you for visiting the HP Support Forums.
Just a quick reminder that this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.
If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation -
My machine has gone dead slow. I have to wait for minutes to perform every single function. Like it stopped typing four times during this question.
If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the boot drive, or some other hardware component, is failing. Back up all data immediately, then run the Apple Hardware Test or Apple Diagnostics.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
Can I use B1 Test Composer to do functional testing?
I would like to use B1 TC for functional testing of our add-ons. Will it be possible for me to do the testing of the add-on using B1 TC? Could anyone explain with some examples so that I can start with B1 TC.
Hi,
Please refer below blog for more details:
http://scn.sap.com/community/business-one/blog/2014/03/14/new-sap-business-one-test-composer-b1tc-release-91
Thanks & Regards,
Nagarajan -
Hi,
While recording adf application with OATS ( with adf functional accelator module ) some of the actions are not recording like search icon , the actions which are recorded in the opened search popup and also calendar actions.
Is there any solution to fix this issue in OATS.
I am using OATS 12.1.0.2
Browser: IE 7
Operation System: windows 7
Regards,
Mohan.Hi This is Atish
Yaa even I have found the same problem when I started recording the ADF functional Testing.
Solution for this is you can add up the following line, at the correct line
clickButton ADFCommandToolbarButton("@text='Search'")
Java Code for the same would be:
adf
.commandToolbarButton(
205,
"/web:window[@index='0' or @title='Business Process Workspace']/web:document[@index='0' or @name='nviwaj5w3_11']/web:ADFCommandToolbarButton[@text='Search' and @absoluteLocator='wlctdc:j_id__ctru12:r1:tldc:searchButton']")
this will click the button, provided you should put the absolute location of the button, which you could get it using the "viewsource" of the html page
Yes even its not recording the input text fields , so i had to enter the field ID fo that field in the line inorder to help the oats to play it back.
Regards
Atish -
Initialization section vs call from another code block in package.
hi,
why is it intialization section in package body is more than call from another code block the package .The initialization section is only called once upon the initial loading of the package into memory, which is just once per session. So, accessing any function or procedure etc in the package causing it to load into memory will automatically run the initialization section first. It doesn't have to be called specifically.
-
Oracle ADF - Open Script functional testing - Error Identification scenarios
Hi All,
We have been exploring OATS - Open script functional testing tool for ADF application regression testing.
We were able to record the transactions and play back those recordings, but we were not able to understand the scenarios where tool will detect as error/ issue.
Based on our understanding, Open script remembers as objects/Xpaths from screens and use them while playing back.
Could you please provide scenarios how tool identifies as errors..ex.component is removed or modified?
Simple example:
1) Open page A
2) Click on image 1 on page A
3) Click on image 2 on page A
4) Click button to navigate to Page B.
In this scenario, when we play back without changing it works fine
but if we remove or comment "image 2 on Page A " it's not throwing as error. it's continuing to next step.
commenting or removing actions/components is not considered as issue.
Thanks for your suggestionsHello Bala
What is your Java version? JInitiator or Sun?
When exactly does this error occur?
What is your OATS version?
Have you ran a Diagnose Tool (Help Menu in OpenScript)?
Thx
JB -
What is the difference between Open-Script and Oracle functional testing
Hi All,
Please help me in spotting out the difference between the Openscript and Oracle Functional Testing for Web Application.
Does Oracle Functional Testing for Web Application have any special features when compared with Open-Script.
Please help me out.
Thanks in Advance,
Nishanth Soundararajan.Nishanth
OFT is the old version of OpenScript, which will no longer be part of ATS as per the next major realize 9.20.
I would recommend to to spend any time looking at it.
Regards
Alex -
Can I pass a table function parameter like this?
This works. Notice I am passing the required table function parameter using the declared variable.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(@Date) I ON i.ID = h.ID
WHERE h.SomeDate = @Date
But I guess you can't do this?... because I'm getting an error saying h.SomeDate cannot be bound. Notice in this one, I am attempting to pass in the table function parameter from the SomeTable it is joined to by ID.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(h.SomeDate) I ON i.ID = h.ID
WHERE h.SomeDate = @DateHi
NO you cant pass a table function parameter like this?
As When you declare @date assign value to it and pass as a parameter it will return table which you can use for join as you did it in first code
But when you pass date from some other table for generating table from your funtion it doesnt have date as it is not available there
Ref :
http://www.codeproject.com/Articles/167399/Using-Table-Valued-Functions-in-SQL-Server
http://technet.microsoft.com/en-us/library/aa214485(v=sql.80).aspx
http://msdn.microsoft.com/en-us/library/ms186755.aspx
https://www.simple-talk.com/sql/t-sql-programming/sql-server-functions-the-basics/
http://www.sqlteam.com/article/intro-to-user-defined-functions-updated
Mark
as answer if you find it useful
Shridhar J Joshi Thanks a lot
Maybe you are looking for
-
Can you sync 2 i phones to one itunes using seperate Apple IDs
My problem is : i have an iphone 4 and my boyfriend a 3gs, until recently we used seperate computers for sync but one broke so we have only 1 between us. We have sepeate Apple IDs and log in to our own each time we want to sync our phones, but we see
-
How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?
-
Append two tables data into one in MSAccess
Hi All, I have huge data which is imported through excel sheet in to MS Access database in 2 separate tables.I want to append the 2nd tables data to the first one...how can i do that...thanks in advance
-
I hate my MacBook Pro. What now?
I ordered it in August and have tried really hard to like it. I'm not saying it's the machine, so please no rude comments - It just does not meet my personal needs. There are things I really like but overall the deal breaker is that I cannot bulk nam
-
LIGHTROOM 3.6 FOR WINDOWS XP
How can I buy a license of Lightromm 3.6 for Windows XP from Spain (in Spanish)? I understand that Lightroom 4 is not available for Windows XP. Thank you, Carlos.