INITIALIZING DOWNLOAD BLOCKED BY FIREWALL

I didn't recognize the I.D. seeking access. It was not identified as Adobe.
Now the initializing program does not trigger the Norton Personal
Firewall permit-do not permit window and invariably fails to connect
to its home site.
any suggestion?

Burning photos to CD.I have downloaded all my photos to a CD, no problem. When I get selective and try to d/load small sections, I get these comments, 1. Cannot continue with your action, it requires at least one connected file. 2. Source files for some of the items you have selected cannot be found at the locations stored in the catalog. Are they saying these photos were not d/loaded directly to the Adobe system? Can anyone confirm or explain? Stanley G. Clare

Similar Messages

  • Mat. for Initial Download: Table not supported by function "C_"

    Hi All,
    We are in SRM 5.0 & ECC 6.0 with Classic scenario. While uploading the MATERIAL through R3AS, we have the "Mat. for Initial Download: Table not supported by function C_" & "No product ID determined for material number ... of logical system" error in SMW01.
    In SMQ2 in SRM, Queue is blocked with "Error in Mapping (Details: transaction SMW01)"
    For your information RFC Users at both the ends have SAP_ALL authorisation. SAP Notes 720819, 420980 & 432339 are implemented.
    Please guide me to resolve this issue.
    Regards
    Ashutosh

    hi,
    How was the issue resolved , i am having the same problem.
    can somebody provide with clue
    regards

  • Stopped Initial download for Bupa_Main  in CRM in between

    Hi Experts,
    We have a problem in CRM. The initial download for the object BUPA_MAIN was accidently started by one of collegues.
    The job ran for almost 24 hour adn was still running. The queues went as high as to 40000 entries & the outbound queues started getting stuck in ISU system
    So we had to finally kill the job & things resumes as normal...
    Can anybody let me know as to what would be the impact of killing the job...

    Hi Rohit,
    Thanks for the info.
    Please let me know as to which table will i have to check to see if the download is successfully completed. ( for object BUPA_MAIN)
    And did u mean unlocking the queues by quoting 'clearing ' the queue. We we did clear the blocked queue (r3ad* ) but the queue R3AI* got cleared automatically...
    Also it seems that the R3AI* queue is still running even cancelling the job.
    Also shows as a error in SWMP tcode indicating a abort of initial download.  How do i get rid of it.

  • Initial Download: object(s) status RUNNING in R3AM1

    Hi,
    I am trying to download materials from R/3 to CRM for which I am following building blocks B09 and C03. I started downloading customizing objects, initial download for object DNL_CUST_ACGRPB. The status in R3AM1 stays as RUNNING and it's been a while.
    All other objects also stay in the same status without any change in block size.
    Please let me know any possible reasons and solution to fix this problem. Thank you.
    BR.

    Hi,
    As requested by all, the Basis consultant has tested the RFC settings and they are working fine.
    - In SMQ1 (CRM) I can see SYSFAIL for the object DNL_CUST_ACGRPB -  on double-click it says there has been a short dump but no dumps can be found in ST22.
    - In R3AM1 the queue cannot be found.
    - In R3AS - When I execute the download of the object, sys. msg is: Please read the OSS Note no. 212666  (Outbound Queue already exists in CRM:R3AI_DNL_CU
    Further details show the error occured in Function module: CRS_FIRST_DOWNLOAD_TRIGGER for the program: SMOF_MONITOR_SMOFDSTAT.
    Help plz !
    BR.

  • Initial download of MATERIALS

    Hi Gurus,
    another needed help.....I'm still in the initial download phase and I'm trying to download MATERIALS from ECC to CRM. After several, now resolved, errors about Tax Groups (missing coutries, sequence and values), I'm facing to another blocking problem.
    For some materials system retrieves me this error message: "A key was used twice for multirows set_type CRMM_PR_TAX". I've checked this table both in CRM and ECC system: the table is empty, so there should not be a "key"...
    Could anyone of you help me?
    Thanks in advance,
    best regards,
    A.

    Hello Sebstian,
    First check the B doc status in  T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
    business obj material in t code R3AC1.
    Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
    I hope it will help you
    regards
    naren..

  • MySAP CRM Initial Download Configuration document

    I could not locate the document mySAP CRM Initial Download Configuration. It is not attached on SAP Note 350176. Is it available via a link?, or perhaps someone can send it over via email?
    Regards,
    James
    ajloren2000<at>yahoo.com

    Hi James,
    The documents
    - B01: CRM Generation
    - C71: CRM Connectivity
    - B09: CRM Customizing Replication
    - C03: CRM Master and Transaction Data Replication
    in the SAP Best Practices for CRM documentation at the below mentioned link will be helpful to you
    [http://help.sap.com/bp_crmv250/CRM_DE/index.htm]
    To open those go to  Technical Information->Building Block Library
    regards
    Srikantan

  • How to check  wether local system has blocked by firewall  from program.

    i am a user in my LAN area. i don't have admin rights. in our LAN few system has blocked by firewall others not blocked .
    how can i check wether local host is blocked or not by firewall from java network program ?.

    You can execute some kind of firewall util (if any) and parse output to receive configuration and check is address blocked or no. But if you have no admin rights - it will not help you.
    Actually there is no clear way to detect was packet blocked by FW or just lost somethere.

  • Problem with initial download of a data object

    Dear All,
    I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
    I have selected the following as the BE Keys in the nodes.
    SERIAL NO in EQUIPMENT header node.
    TYPE in DETAILS node.
    ZIPCODE in LOCATION node.
    In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
    In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
    Data object contains no errors and i have activated the data object and it was successful.
    Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
    Now i have triggered an initial download for the  "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
    So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
    Regards,
    Kiran.

    Hi Kiran
    Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration?  The logs should have the proper error.
    If not can you regenerate the DO, edit and activate your adapter and try again?
    Regards
    Rohith

  • Problem with initial download from R/3 to CRM

    Hello All,
    Initial we were able to download & replicate all object from CRM to R/3  & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry  i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which  should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
    Regards
    Priyanka
    Edited by: Rob Burbank on Dec 9, 2011 4:37 PM

    Hello,
    see note 588701:
    "The queues are deliberately halted since the change of the logical       
    system name in the R/3 backend or the linking of new R/3 backend clients 
    to a client of the EBP/CRM Server with the same logical system name as a 
    client already linked to the R/3 backend would lead to severe data       
    inconsistencies in various CRM applications.                             
    For this reason, such changes are not allowed on principle. The halting  
    of the queues prevents such data inconsistencies. The following          
    situations may lead to the queues being halted:                                                                               
    o  The logical system of a client of an R/3 Backend system linked to 
           the EBP/CRM server was changed in current operation.                                                                               
    o  A new client of an R/3 Backend system or a client of a new R/3    
           Backend system was linked to an existing client of the EBP/CRM    
           server where the logical system name was already assigned to a    
           client of an R/3 Backend system linked to the CRM server before.  
    There are different cases in which different forms of processing are      
    required or where several options exist:                                                                               
    -  The logical system name of an R/3 Backend client was changed    
              in current operation. In this case, the data hangs in the       
              outbound queues of the R/3 Backend system as specified under    
              point 1 of the symptom. In this case, the logical system name   
                                                                     Seite 2                                                                               
    must be changed back to the original value. Then the outbound   
              queues can be reactivated. If no data was transferred to the    
              EBP/CRM server before the change, also a correctioin of the     
              check table is possible.                                                                               
    -  The same logical system name was used again in a new client of  
              an R/3 Backend system that was linked to the EBP/CRM server.    
              In this case, the data is in the inbound queue of the EBP/CRM   
              server with the exception GUID_FOR_LOGSYS_CHANGED. In this      
              case, the queue entries which have status SYSFAIL must be       
              rejected, however, not the entire queues. If the new client of  
              the R/3 Backend system you have linked has exactly the same     
              data as the old client and if it is meant to replace the old    
              client (that is, this was deactivated), also a correction of    
              the check tables is possible. In this case, the inbound queues  
              can be reactivated after the correction.                        
    The correction of the corresponding check tables or the correct           
    procecure in individual cases is to be agreed upon with the support of    
    SAP or SAP consultants at the customer site. In justified cases, SAP can  
    carry out the correction of the check tables.           "

  • Initial download of Z contract table from R/3 to CRM

    Hi,
    We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
    We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
    My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
    This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
    I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
    Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
    Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
    Any suggestion or insight on this will be very helpful.
    Thanks,
    Prasoon

    Hi Michael,
    Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
    Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
    Any suggestions will be appreciated.
    Thanks,
    Prasoon

  • Issue in Initial Download R/3 and CRM

    Hi,
    I am trying to do an initial download from R/3 to CRM. But I get a "SYSFAIL" status. On checking the transaction SMQ1 on ERP side, I see that RFC destination point to self for which the connection type is "I" i.e. Internal. I also tried to change the RFC destination, then it gives a message "No LUW exists in the Specified Queue".
    I have referred to the note number 588701 and checked everything is fine according to that note.
    All necessary entries have been maintained in CRMCONSUM, CRMRFCPAR. the queues have been registered correctly. Entries in SMOEAC transaction are also checked and they are fine.
    Please guide me here.
    Harsh

    The issue has been resolved after applying note 760518 as R/3 was a system copy and a wrong entry was maintained in the table CRMPRLS.
    Note: Please get in touch with your admin or an ABAP coder before applying this note.
    Harsh

  • Business partner Initial Download

    Here is description of Business Partner setup:
    CRM - Account groups - Prospective - Soldto
                                            Soldto
                                            Shipto
    ECC- Account groups - soldto
                                           Shipto
    There are some more but in order to ask my question i have listed few:
    We are converting data from Legacy system and it is new SAP ECC/CRM Implementation
    We are going to create Prospective in CRM will replicate it to ECC under classification Prospect
    In ECC we will do account group switch from Prospect to Customer keeping business partner id same by defining same number range for Prospect and Customer account group in ECC. By middlware enhancment we will replicate customer to CRM and change prospect to Customer in CRM keep same business partner number.
    My Question is for Legacy Data conversion:
    Data conversion strategy is to load data to ECC system and then do Intial download to CRM.
    My concern is how does initial download work in terms of numbering the BP. I am going to load all customers in ECC and download to CRM.
    Once we are done with initial download we will fall back to strategy of creating prospect in CRM and later doing account group switch in ECC to customer so number range in ECC is external for customers. But for data conversion legacy system is going to hit ECC -- How do we control number range ?

    Hi Murali,
    As backend ERP system was a pretty old system, we had to implement 1067977. After this, the Middeware was working fine.
    Sunil,
    You could try implementing this note to solve your problem
    Thanks & Regards,
    Karthik
    Edited by: Krishna Karthik Puttagunta on Feb 8, 2008 11:29 AM

  • Error: Initial Download of Materials

    Hello,
    I came across these errors with initial download for materials. I had downloaded relevant cutomizing objects, dnl_cust_prod, -prod1, -prod3, -plnt etc.
    Pls suggest any resolutions for the issues listed here.
    1 Assign product &1 to a category from hierarchy &2
    2 Data on set type & cannot be maintained
    3 Logical system &1 does not exist in table TBDLS
    4 Category for R/3 product hierarchy & does not exist
    5 No descriptions exist for product &1
    6 Enter a base unit of measure
    Issues:
    2. Set types 'COMM_PR_MAT' and 'BBPM_PR_GENERAL'are missing in CRM. Can these be entered manually in CRM. These set types were not created in CRM with customizied download of objects.
    3. Does logical system name and RFC destination name has to be maintained same?
    4. Can the specific category be created manually in CRM. OR does it have to be done with cutomized objects download.
    5. Description is given in R/3 for the product
    6. Is the 'base unit of measure' different from 'unit of measure'. How to specifically maintain 'base unit of measure' in CRM
    Your help is greatly appreciated and rewarded.
    Regards,
    Jay

    Hello Sebstian,
    First check the B doc status in  T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
    business obj material in t code R3AC1.
    Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
    I hope it will help you
    regards
    naren..

  • Help with initial download....do I have right version?

    My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
    Also, when entering the forum it asked which product I had questions about...I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
    I was looking to purchase a fully  functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing!  Did I get the right one?  Is this a stand alone program?  I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
    Thank you!!!!
    Meredith
    Lafayette CO

    Meredith wrote:
    My initial download/import to populate Photoshop Elements 13 stopped working (responding) at about 80%...If i re-download, will it duplicate the first 80%?
    Where did you download from?  Was it installed or just downloaded?  Did you purchase it or are you using the trial?
    I would like to know the difference between Photoshop, Photoshop Lightroom & Photoshop Elements...
    See here:
    FAQ: Why is Photoshop Elements cheaper? What's different about Photoshop?
    I was looking to purchase a fully  functioning 'photo/picture' program for my new Toshiba (previously a Mac user) and know nothing!  Did I get the right one?  Is this a stand alone program?  I have a MASSIVE photo endeavor and want to be set up in the best way before I begin organizing 50 years of pix!
    Photoshop Elements will work for you.

  • Initial Download

    Hi Everybody
    I am performing the initial download and defined the logical systems, client systems, set up the RFC USER, sites, subscriptions and the rest of the configuration settings and I am at a junction not knowing what to do next..
    Could someone help with the steps from this juncture.
    Cheers
    Jessy

    Hi Buddy
    I meant
    C71: CRM Connectivity
    B09: CRM Customizing Replication
    C03: CRM Master and Transaction Data Replication
    available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Maybe you are looking for