Initializing Main Interface Slow on Elements 12.1

I originally installed PSE 9 on Windows 8.1.and have about 3500 photos in my catalog. I just upgraded to Photoshop Elements 12.1.
After updating I noticed it takes a long time to start up Organizer. I have a shortcut to open Organizer from the desktop. When I start
Organizer 12.1 it lags at "Initializing Main Interface" and then once it opens it's fine. It didn't have this lag in Photoshop Elements 9 before
I upgraded to version 12.1. Any ideas?

I had issues wit this on my windows 8.1 after installing PSE 13, initializing main interface took forever, I did ctrl/alt/delete while it was in this initializing process, selected end pse 13 organizer and a window popped up telling me it needing to install a program/update (don't remember what it was called), hit install and organizer opens great now

Similar Messages

The new Photoshop Elements 11 user interface | Learn Photoshop Elements 11 | Adobe TV

Take a tour of the new, modern interface in Photoshop Elements 11. See the three-column design of the updated Organizer, learn about the options in the Task bar, and see how you can easily view subsets of photos by People, Places, Events, and even Media. Also check out new Quick, Guided, and Expert editing modes, which enable you to edit photos the way that works best for you.
http://adobe.ly/PnCOFT

While I like some of the thinking behind the new interface, it looks like it was drawn by a 5 year old child who was only allowed to have thick crayons. I HATE the way that I cannot enlarge the layers panel in the main editor*, the way the tool icons are double stacked on the left and the midtone gray background. For those reasons alone I will continue to use Elements 9, even though I have paid good money for 11.
except by clicking layers icon in the bottom tool bar, which erases all the other tool windows you had open, so you have to use the window drop down menu to get them back.
Frankly, it's crap.

8.0 hangs at Initializing User Interface

My son has a fourteen minute movie project that was created in Premier Elements 3.0. For some reason every time he goes to render the movie now he gets an error. The only thing it will let him do is render it to DVD format. The problem with this is that he'd like to post the movie on the web and we don't know how to get it to the web from the DVD format.
The computer running 3.0 is Win XP 32 bit with 2GB of ram. It cannot be upgraded further. We assumed these issues were happening due to a low memory problem of some sort.
To solve this problem about a year ago, we tried upgrading to a new version of 8.0 on a newer machine. We haven't been able to get any of the movie projects to open in 8.0. They all hangs on a black screen with the message "Initializing User Interface."
The new computer is Intel Quad Core CPU [email protected] 4 GB of ram, 64 bit running Windows 7.
Graphics cards are two Nvidia 9600 GT. I currently have the SLI disabled.
All of my drivers and software are up to date.
Our version of 8.0 was updated to 8.1 or 8.01 not sure what it was... it is the only update available for 8.0.
You can see other movies he created with 3.0 back when it was working properly here...
http://www.youtube.com/watch?v=f-QgSllmhvU
http://www.youtube.com/watch?v=oFEc9VBV0ik
We've tried calling in about this issue and have been incredibly frustrated with the lousy customer service. The woman today told me that he would just have to recreate the movie in 8.0. She claimed there is a way to convert it but she won't tell me unless I pay an hourly rate or buy the new 9.0 product. The new project contains over 8000 pictures and represents a year of work.
I'd like help with either of these problems. Getting the 3.0 version to render or getting the 8.0 version to open the 3.0 project so that it could be rendered.
Thanks

Although Adobe touts their PRE as being 'backwards compatible" in reality it doesn't really work. If you have projects created with an older version, then you should only do further editing in that same version.
Multiple versions of PRE happily coexist, so install your 3.0.2 version (get the update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=3565) on your newer machine. If you have saved the v3 project out from the v8 product then recopy the project from your older machine to the newer - saving it from v8 will not work in v3.
Cheers,
Neale
Insanity is hereditary, you get it from your children

After Effects not starting at all, stops at "initializing user interface"

I installed CS5 master collection trial version on W7 64 bit machine.
After Effects doesn't load at all (it stops at "initializing user interface") and it's even impossible to kill the process in windows (never had this problem with any app). I can shut down all the other processes, like dynamiclinkmanager.exe or Adobe QT32 Server.exe, but aftereffects.exe just won't stop and I need to restart my PC.
Also Premier crashes after I click 'new project', or try to open something, but the application starts and I do see the whole GUI.
I updated Quicktime, as well as my video card drivers. All other apps in the master collection seem to work fine. Uninstalled the whole thing twice (with the remove preferences option), cleaned the registry with a comodo system clean up utility, reinstalled also twice- nothing. Tried with the firewall turned off and quick time completly uninstalled - nothing changed.

can you rename or delete "C:\Users\xxxxx\AppData\Roaming\Adobe\After Effects\10.0"
can you rename or delete for max 11
"C:\Users\xxxxx\AppData\Local\Autodesk\3dsmax\2011 - 64bit\enu"

How to prevent JaxB creation of 2 Interfaces for each Element?

hi,
does any body know how to prevent JaxB creation of 2 Interfaces for each Element (The Content Interface and the element interface)?
I want to configure JaxB to use only one Interface and only one implementation Class.
Thank's,

I am sorry I can not answer your question, I have got the same problem. Could you please email me to
[email protected] when you know the answer, please.
I have a question for you. When and complex type is validated, I get the object which contains the error. ( or objects ).
However. How do know the position in the actual parent object. basically. Is there a way to know exactly the position of that attribute in that object. I need to store errors strings.
The first problem derives from this one:
It is not possible to execute validate function for a primitive attribute inside an structure.
I would appreciate your help.
Thanks.
Gustavo.

Keyword autocomplete not working in main interface (but works in import dialog)

Keyword autocompletion is not working for me in the Keywording panel of the Library. I type the first few letters o a known keyword, and nothing happens.
The feature works as normal, however, in the Keyword section of the import diagog box.
Does anyone have any idea how I might have gotten myself into this situation, and how to re-enable autocompletion in the main interface?

Autocompletion works fine when you type the keyword into the text entry field "Click here to add keywords" (see attached screenshot).
Above is changed behaviour from version 1.x and was provided so that users could choose to use autocomplete or not.

Cisco 877w -Configuration of subinterfaces and main interface within the same bridge group is not permitted

Hi,
I have another problem - after upgrade ios wirelles connection not work.
After reload i have :
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
STP: Unable to get the port parameters.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
Please configure the bridge group on this interface first.
SETUP: new interface NVI0 placed in "shutdown" state
my old configuration work propertly in the old software, but after update i have notificatio.
Old thread:
https://supportforums.cisco.com/discussion/12379491/cisco-877w-no-wireless-connection
my current sh run:
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname cisco
boot-start-marker
boot system flash:c870-advipservicesk9-mz.124-24.T6.bin
boot-end-marker
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$eCNp$rWuBfZ/cexnwnkm7L447s.
aaa new-model
aaa session-id common
dot11 syslog
dot11 ssid ciscowifi
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 050D031D26595D0617
dot11 wpa handshake timeout 500
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.56.1
ip dhcp pool CLIENT
import all
network 192.168.56.0 255.255.255.0
default-router 192.168.56.1
dns-server 8.8.8.8 194.204.159.1 194.204.152.34
lease 0 2
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
username marek password 7 00121A0908500A
archive
log config
hidekeys
ip tcp path-mtu-discovery
bridge irb
interface ATM0
description Polaczenie ADSL do ISP$ES_WAN$
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
hold-queue 224 in
interface FastEthernet0
description Edzia
interface FastEthernet1
description dom
interface FastEthernet2
description Dziadek
interface FastEthernet3
interface Dot11Radio0
no ip address
no ip redirects
ip local-proxy-arp
ip nat inside
ip virtual-reassembly
no dot11 extension aironet
encryption vlan 1 mode ciphers tkip
encryption mode ciphers aes-ccm tkip
broadcast-key change 3600
ssid ciscowifi
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country AU indoor
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
description ciscowifi
encapsulation dot1Q 1 native
no cdp enable
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
description Interfejs dzwoniacy
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp chap hostname [email protected]
ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxx
interface BVI1
description Polaczenie dla sieci LAN
ip address 192.168.56.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
ip nat inside source list 100 interface Dialer0 overload
ip nat inside source static tcp 192.168.56.10 80 interface Dialer0 80
ip nat inside source static tcp 192.168.56.10 22 interface Dialer0 22
logging trap debugging
logging 192.168.56.10
access-list 100 permit ip 192.168.56.0 0.0.0.255 any
access-list 100 deny ip any any
no cdp run
snmp-server community ciskacz RO
snmp-server chassis-id ciskacz
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 0 0
transport preferred ssh
transport input ssh
scheduler max-task-time 5000
end
please help - thanks!

Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter

After Effects Crashes On Startup (Initializing User Interface)

OK, this is really frustrating me now.
I've tried CS3, CS4 both on a Late 07, maybe early 08 White Macbook running Leopard 10.5.8, 4GB Ram, 2.1GHz CPU.
I installed CS4 without a hitch, but when I go to open it sticks on "Initializing User Interface" at the splash screen and then crashes and quits. This happens with CS3 as well, and I am unable to open anything.
I've tried to delete user preferences, create a new user and try there, repair disk permissions, connect an external monitor and try again, nothing works!
Any suggestions to get this to work?

I just did this search for the error message, and I found some possible solutions, including in the comments on this page.

GS-11: Tour the Full Edit interface | Learn Photoshop Elements 8 for Mac OS | Adobe TV

Take a tour of the Full Edit interface in Photoshop Elements. This workspace gives you full control over editing and manipulating your photos.Use with either Photoshop Elements version 7 or 8.
http://adobe.ly/wCqznF

The video is working. I've sent you a personal email offlist to help diagnose why you may be having trouble watching the video.

Why JDBC has mainly interfaces ?

Hi,
I was studying JDBS when a thought came to my mind.
I can see mainly interfaces in JDBC, like the Statement interface,Connection Interface etc.Whys such a architecture?
Can anyone let me know...
With Regards

The interfaces provide a known API that you the user can write your code against.
The driver implementor (usually the database vendor) can then do whatever's necessary to support that interface.
There are only a few classes in the spec because:
* Most of the "hard" stuff tends to happen IN the database itself.
* DB Vendor protocols tend not to have much in common.
* The interfaces minimise the constraints placed upon the vendors when creating their implementations.

Main Interface and Sub Interface

Hello,
I'm fairly new to ASA firewalls so some help is appreciated. Can anyone explain the point of the below config. I thought that normally when using Vlan's there would be no point on configuring a nameif & security level on the main interface? In this case what would configuring an ACL based NAT exemption on the Trunk interface do to traffic on the sub interfaces?
interface GigabitEthernet1/0
nameif Trunk
security-level 100
no ip address
interface GigabitEthernet1/0.100
vlan 100
nameif VLAN100
security-level 100
ip address 192.168.100.1 255.255.255.0 standby 192.168.100.2
interface GigabitEthernet1/0.101
vlan 101
nameif VLAN101
security-level 90
ip address 192.168.101.1 255.255.255.0 standby 192.168.101.2
interface GigabitEthernet1/0.102
vlan 102
nameif VLAN102
security-level 80
ip address 192.168.102.1 255.255.255.0 standby 192.168.102.2
Thanks Steve

You're right about the main interface.
If you use subinterfaces, you typically do not also want the physical interface to pass traffic, because the physical interface passes untagged packets. Because the physical interface must be enabled for the subinterface to pass traffic, ensure that the physical interface does not pass traffic by leaving out the nameif command. If you want to let the physical interface pass untagged packets, you can configure the nameif command as usual.
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/intrface.html#wp1044006
Hope that helps

Service policy on subinterface or main interface

Folks,
We have a frame relay circuit and are applying MQC to the branch sites. We are not sure if we should apply the service policy to the subinterface or the main interface(serial). any pros and cons?
Thanks

If you want the same policy applied to each VC then applying at the physical interface would be best (depending on the scenario and how many sub-interfaces you have). In the long run applying the service-policy to the sub-interface will pay for itself.

KT4V board having "Initializing Video Interface" problems

This is the board I have... http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=362
I can not get anything to display on the monitor. I was using an ATI Radeon 9550 PRO 128 MB and I thought that was the problem so I installed a GeForce 6200 256MB card and I am having the same problem. No video to my screen. Everything else boots up but I can't see anything.
I have the D-Bracket 2 installed that came with the board and it gives me an immediate indicator using a light pattern that my problem is: "Initializing Video Interface - This will start detecting CPU clock, checking type of video onboard. Then, detect and intitalize the video adapter." I get the same light pattern even when I don't have my video card in.
Could there be something wrong with my AGP slot? Do AGP slots burn out on motherboards?
Help.
Semper Fi,
Jamie Coomes

Hi
Did you uninstall the old video card drivers before trying the new video card? Can you boot into safemode OK? If you can then you can run driver cleaner if the following suggestions fail.
http://www.drivercleaner.net/
Try booting the system with only one stick of memory if you have two and then try the other one if the first one doesn't make a difference.
You can also try clearing the cmos by removing the AC cord from the power supply, pressing the power button to clear any residual electricity from the system and then moving the cmos jumper to the clear position. Leave it for about a minute and then put it back into the hold position (pins 1&2) before reconnecting the AC cord and powering the system back up. Go into the bios and set the correct date and time. Save and exit.
AGP slots are like any other piece in the computer. They can fail but it is rare. Is there anything down inside the slot that might keep the video card from being fully seated?

Freeze At Initializing Video Interface

I reently purchased an MSI 848P mobo, and a p4-2.4, i have a 420 psu, and an Ati Radeon 9800, The board will lock up on Initializing Video Interface acording to the D-Bracket, I have tried everything, changing psu's ram, reseating ram, vid card, cpu, power connections, and nothing, i've tried the card in other computers and they post fine, with the exception of one other msi board that also is brand new but of the athlon 64 variety, i have an ati 7000 that i am running right now and it works fine, and yes the molex connector is plugged into the vid card. Any help would be much appreciated

Hi mPulse,
Yes, 5.9 "should" have all the extra fixes, that previous bioses have.
I would also check with ATI/Maker of your card if there is a firmware update.
I borrowed a ATI based 9800 card and placed in 848P Neo S 1.7 bios...... booted no worries. (Have demo of Doom3, what difference.......) Spex as below but diff mainboard.........
Sorry, cannot be pin point your problem..........
Del

After effects CS3 locks up at Initializing User Interface

I am doing an install for a school lab and they are requesting both CS3 and CS4. Is that possible under Mac OS 10.5? I have managed to get everything to work except After effects CS3. They didn't need CS4 after effects so i removed that and CS3 after effects still doesn't work. I removed the prefrerences in the users Library folder and allowed after effects to re-create it and I am still unable to load the program It Freazes at Initializing User interface. I have tried uninstalling CS4 and CS3 After effects still didn't work. I just uninstalled CS3 as well and re-installed it again and i am still getting the same error. Any suggestions? I might Remove CS3 again and use the script that is on the net to remove all CS3 data.

What Macs are we talking about? There are some issues with some iMac models that seem to occur with specific configurations of said iMacs. A regular occurence is some 2007/2008 series models with ATI cards not launching AE at all or going into a freeze. Users have reported that completely re-installing OSX fixed these issues, so I can only assume it's a flaw in the factory disk image used to pre-format and pre-configure those machines upon delivery. Other than that I'm not aware of a specific cause, but who knows. If you can provide more info, I'm sure something can be clearly made out as the culprit.
Mylenium

Initializing Main Interface Slow on Elements 12.1

Similar Messages

Maybe you are looking for