Initializing model photoshop 3.2

Something happened to my photoshop 3.2, I tried removing photoshop 3.2 from my computer, then reinstalled it again When it gets to initializing model (down in left corner of start up) the program will not open. Someone please any advice would be appreciated.

Hi Lorri,
Can you tell us the circumstances that required you to uninstall it
first? That might provide some clues.
Cheers

Similar Messages

Initialize Model - Photoshop Album Starter Edition 3.2 Will Not Load

I have a Dell Dimension E510, running Windows XP and I just downloaded Photoshop Album Starter Edition 3.2. It install successfully, but when I go to launch the program it freezes and in the bottom left hand corner of the Adobe Launcher window it states "Initialize Model".
The program never finishes loading and does not work on my machine.
Any suggestions or help would be appreciated.

I finally gave up. I got no reponse in this forum or from Adobe.
I literally restored my entire computer back to its original state and guess what... SAME ANNOYING THING HAPPENED "Initialize Model" then FREEZE...
I went out and bought Adobe Photoshop Elements 6 at Costco for $49.00 on sale and it works great and actually a much superior product. My heart skipped a beat when it got to Initializing Model, but it went right by and worked fine.
I understand Album Starter is freeware, but why even release a product even for free if it just doesn't work.
So far no problems with Elements and although I had to shell out $49.00 at least now I have a supported product.

Pse hangs at "Initializing Model ..."

Intermittedly, pse7 hangs on the startup screen at "Initializing Model ..."
The only solution is to re-boot.I have Vista.
Any ideas of what the problem might be?
Thanks
Chas

Unfortunately, there could be any number of causes. Try these troubleshooting steps:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes

Stuck in "initializing model" screen - won't open - HELP

Not sure what is up....new to this software.....had initial troubles with set
up and running - but tech support did help me launch and I usedit successfully for month or more.
now - stuck and not sure how to proceed....will open in /editor screen, but will not go to
organzer screen. Ant ideas?

Unfortunately, there are many reasons why the PSE Organizer might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Organizer_ crashes
If you had uploaded to one of the online services such as SmugMug or Kodak in your last Organizer session that didn't crash, start with step 7. But regardless, work through all the steps methodically.

Constructor undefined , while initiating model node in component controller

Hi Team,
I am getting constructor undefined error, when i am trying create an object of model node in component contrloller.
i tried the solution provided in this Undefined constructor and model nodes but it is working.
can any one suggest me?
Regards
Bala

Hi Akshaya,
here is my code.
i am just intatiating the model node in component contrlloer.
the below method id in component controller.
public void wdDoInit()
    //@@begin wdDoInit()
try {
        AnyType_Item atm = new <b>AnyType_Item()</b>
wdContext.nodeAnyType_Item().bind(atm);
catch (RuntimeException e) {
     // TODO Auto-generated catch block
      e.printStackTrace();
      wdComponentAPI.getMessageManager().reportWarning(e.getMessage());
The above bold one is error, saying constructor is undefined.
regards
Bala

Photoshop Elements Organizer/Editor Hanging on Startup

When I open Photoshop Elements 10 from the start menu, it takes about 3 minutes for the first welcome screen to appear. If I select to open the editor from the welcome screen, or by right-clicking a file in Windows Explorer and selecting 'Open with...Photoshop', the program opens, the image populates on the canvas, and within a few seconds the program hangs for about 3-5 minutes (fades out, title bar says (Not Responding)). I have tried adding 127.0.0.1 etc. to the host file, removing FastCore, MMX, and a third .8BX file I can't recall at the moment, opening with administrative privileges, and changing my default printer to a dummy local printer, to no avail. Has anyone had similar problems? I suspect the issue has something to do with the 'Initializing Main Interface...' item in the C:\Users\[user]\AppData\Roaming\Adobe\Elements Organizer\10.0\Organizer\log.txt taking 168,000 units (ms?) of time to execute, but I'm not sure. Below is the most recent log file (emphases mine):
1 (+   0) Begin AMT Library calls
      24 (+ 23) End AMT Library calls
      76 (+ 52) Primary Font: Myriad Web Pro
      76 (+   0) Loading Bitmaps...
     363 (+ 287) Loading Components...
     363 (+   0) Initializing BIB Host...
     364 (+   1) Initializing Bravo Components...
     364 (+   0) Initializing ACE
     365 (+   1) Initializing color settings
     567 (+ 202) Monitor color profile: sRGB IEC61966-2.1
     567 (+   0) Initializing XMP
     568 (+   1) Initializing Plug-in Host...
     570 (+   2) Initializing Photoshop Adapter...
     571 (+   1) Initializing AS Host...
     571 (+   0) Initializing Plug-ins...
     584 (+ 13) BEGIN -> pse_util::add_mime_types
     585 (+   1) END -> pse_util::add_mime_types
     585 (+   0) Plug-ins found:
     585 (+   0)   C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe (Sweet Pea 2 Adapter Plugin)
     585 (+   0)   C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 10\File Formats\Camera Raw.8bi (Camera Raw)
     585 (+   0)   Locales\en_us\Plug-Ins\File Formats\BMP.8BI (BMP)
     585 (+   0)   Plug-Ins\Organizer Only\File Formats\Gif.8bi (CompuServe GIF)
     585 (+   0)   Plug-Ins\File Formats\WBMP.8BI (Wireless Bitmap)
     585 (+   0)   Plug-Ins\File Formats\Targa.8BI (Targa)
     585 (+   0)   Plug-Ins\File Formats\Pixar.8BI (Pixar)
     585 (+   0)   Plug-Ins\File Formats\PCX.8BI (PCX)
     585 (+   0)   Plug-Ins\File Formats\FilmStrip.8BI (Filmstrip)
     585 (+   0)   Plug-Ins\Organizer Only\PhotoshopAdapter.apl (Photoshop Adapter)
     585 (+   0) File format plug-ins:
     586 (+   1)   Camera Raw (R: tif crw nef raf orf mrw dcr mos raw pef srf dng x3f cr2 erf sr2 kdc mfw mef arw nrw rw2 rwl iiq 3fr fff srw)
     586 (+   0)   BMP (R: bmp rle dib)
     586 (+   0)   CompuServe GIF (R: gif)
     586 (+   0)   Wireless Bitmap (R: wbm wbmp)
     586 (+   0)   Targa (R: tga vda icb vst)
     586 (+   0)   Pixar (R: pxr)
     586 (+   0)   PCX (R: pcx)
     586 (+   0) Initializing AGM
     614 (+ 28) Initializing CoolType
     616 (+   2) System:
     616 (+   0)   System Architecture: Intel CPU Family:6 Model:10 Stepping:7 with MMX, SSE Integer, SSE FP
     616 (+   0) Driver versions:
     616 (+   0)   Microsoft DirectX Version: 9.0
     616 (+   0) Support application versions:
     616 (+   0)   Adobe Acrobat Reader Version: 11.0
     617 (+   1)   Adobe Acrobat Version: 11.0
     618 (+   1) Initializing OLS
     654 (+ 36) Cleaning up old email attachments
     655 (+   1) Initializing Controller...
     655 (+   0) Initializing Platform...
     656 (+   1) Initializing Threads...
     658 (+   2) Initializing Model...
     658 (+   0) Begin Open Amoc Database
     685 (+ 27) End Open Amoc Database
     686 (+   1) Initializing Main Interface...
168844 (+168158) Main window visible
168909 (+ 65) Finished UI init.
168965 (+ 56) reloadNavigatorAndView() initializing for a new Search
168991 (+ 26) App is now visible and ready for input...
169001 (+ 10) Begin PtContentbgThread() construction
169001 (+   0) End PtContentbgThread() construction
169001 (+   0) Begin PtIpodContentDownloadThread() construction
169001 (+   0) End PtIpodContentDownloadThread() construction
183840 (+14839) BEGIN BackgroundPreprocessor::setupInitialRequests
183841 (+   1) END BackgroundPreprocessor::setupInitialRequests
183841 (+   0) BEGIN WaldoPreprocessor::setupInitialRequests
183841 (+   0) END WaldoPreprocessor::setupInitialRequests

Try renaming the folder "Elements Organizer" and "Online Services". These folder are present at C:\Users\<current user>\AppData\Roaming\Adobe for Win 7.
After renaming these folders, application should launch without crashing. For Win XP they are present at correponding location for current user.

Photoshop Album SE won't open, won't work

I have downloaded and installed several times. The license comes up and I accept. Then Photoshop Album SE logo comes onscreen but it never initializes or opens. Just sits there. I go to CTRL-ALT-DEL and see that it is "Not responding," so have to End Task. -- It never gives me a chance to register and get an unlock code. Any suggestions?

Hi, Jim. I used a desktop PC, WindowsXP, and Internet Explorer. I have downloaded three different times rather than just re-installing the DL that didn't work. Each of those times, before re-installing, I went to Add/Remove and did a repair, but to no avail. Then went back to Add/Remove and got rid of the non-working one. Also used Registry Optimizer to clean out any left overs. Then downloaded a fresh zipped copy and installed anew. But always same result. Which was seeing the opening logo screen with tiny writing on the bottom that said "Initializing model" --- but never anything else.
Taskmanager said program was "Not responding." -- I read the Forum and saw suggestion to hold down CTRL key while loading the program. Did that. Nothing. -- Thanks for your interest.

Uploading with Photoshop Album Starter Edition 3,2

Hello,
I´m using the edition for several years without any problems, now since a few weeks when I try to upload from my camera to the computer not all of the pictures are beiing uploaded.
Does anyone know what to do???
I´m using Windows xp
Greetings
Hans

[email protected] wrote:
> hello, I've been working with photoshop starter edition 3.0 for about 3 years and all of a sudden it does'nt work anymore. I've upgradet to edition 3.2 and still it does'nt work. The programm starts and then stops at initializing model. What can I do? I use windows xp.
> Thanks a lot.
Hi Anita,
For XP you do NOT need to upgrade. I would recommend uninstalling the
application, redownloading a fresh package and reinstalling. Remember to
put in your email address when you get the package so that Adobe sends
you a unlock code.
I think what you have run into is a minor problem with a file becoming
corrupted. The problem is, it is easier to just reinstall than to try to
figure out which file.
Your images will be fine as your catalog does not change.
Cheers

Adobe photoshop 11 freezes on startup

when I start up adobe photoshop 11, the screen freezes on "initializing model ...". the only way I know to fix the freeze problem is to reboot my computer.
Later on, I may need to do this workaround again. this workaround is very aggrevating. what do I need to do to fix this? I was under the impression I purchased a professional product that wouldn't freeze randomly.

I did as andromeda14 asked above with the adobe photoshop organizer. It has been stuck on "initializing model..." for about 3 minutes now. just so you know, I did not reboot this morning and my laptop has been on for about the last 12 hours without a reboot.
When the program works correctly after a reboot, the program completes "initiating model..." in one or two seconds.
I do not see how picture data or metadata that I enter into photoshop organizer can be causing this problem. If my data were the problem, then why does a reboot correct the problem? I think it is more likely the progam has not cleaned up after itself (hung task or data in registry) after being shut down thus causing the program not to initiate properly after being started a second, third or fourth time.
Just so you know, the elements organizer app occasionally does start on the 2nd or subsequent time after a reboot. I have not been able to figure out why this occurs. I do know for sure that I will get 1 good start up after a reboot. after that, subsequent start ups may or may not work. I seems the longer I wait to start the second time, the more likely it will hang on "initiating model...".
Just so I know, are you an adobe tech support person or are you an expert user?

Help! Strange Photoshop 9.0.2 error message

Hi—when open my Photoshop 9.0.2 (CS2), I get the error message:
An unexpected and unrecoverable problem has occurred because something prevented the text engine from being initialized. Photoshop will now exit.
This occurs after all the tool boxes, etc. have opened. Does anyone know how to fix this?
I'd be forever grateful for any advice—Thank you!!!

Hi, I'm using an i-mac, version 10.4.11
the specs are below.
Model Name:     iMac
   Model Identifier:     iMac6,1
   Processor Name:     Intel Core 2 Duo
   Processor Speed:     2.16 GHz
   Number Of Processors:     1
   Total Number Of Cores:     2
   L2 Cache (per processor):     4 MB
   Memory:     1 GB
hmmm, I'll try it in a new user.
Thanks!

Photoshop CS6 Continues to crash

I Installed photoshop CS6 extended on to my brand new mac book pro early 2013 and it has worked without any problems until Thursday September 4th 2014. whilst working on an illustration photoshop quit unexpectedly. A Huge binary explenation is included in the quit message. Having been instructed by Adobe to go on the forum I consequently on advise initially uninstalled photoshop and reinstalled it. Following further advise I then removed the preference folder as well as the brushes folder from the library adobe section. I have also removed the illustion I was working on. I am at a loss as to what to do next as the problem has continued. Can someone please help me?as this has now become very frustrating.

Then come clean with your complete and detailed setup specs. Maybe your Mac Book is not up to the task. Could be insufficient installed RAM, insufficient available space on your boot drive, inadequate scratch space, etc. It could also be bad RAM, RAM modules can and do go bad over time. Apple is as susceptible as any 3rd party RAM supplier ti delivering faulty RAM sticks.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do I download Photoshop CC?

After initially downloading Photoshop CC and Lightroom 5 a couple of days ago, today Photoshop CC was totally unresponsive. I deleted Photoshop CC and have attempted to download and re-install it, but now the download feature work.
Lightroom 5 continues to work normally. How can I download and re-install Photoshop CC?

You didn’t describe the details of “doesn’t work” to make it easier to guess what might be wrong.
If you haven’t, try going to the Creative Cloud site and download from there. Clicking on the Ps icon is supposed to start up the AAM which should download things. If that isn’t working, then post a screenshot to a forum message, using the web version of the forums, not e-mail.
https://creative.adobe.com/products
You may also want to try uninstalling the Adobe Application Manager and download and update it to the latest version before retrying the install:
PS: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/product.jsp?product=170&platform=Macintosh
If you want to have everything cleared out about your PS-CC or AAM then try the CC Cleaner tool:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

ESR modeling and Aris

Hi,
In our origination we are using Aris for the modelling of business processes. From what I am lead to believe is that Aris integrates with SAP Solution Manager and Solution manager integrates with the SLD. So landscape, software products and software component information can thus be pulled into Aris for use in models. This will greatly assist in the business process modelling in Aris, I would imagine.
Now once the business process is modelled in Aris, is there a way of importing it, as say a Procomp Model in the ESR?
Would you want to?
Or would you just continue to model in Aris and then pull in the interface logic into the models on the Aris side?
What is then the use of the modelling tool in the ESR?
Would you recommend that one should remodel the Aris Business Process Models in to the Modeling tool in ESR?
As you can see I am looking for some guidance in this regard.
Many Thanks
Willie Hugo

Hi,
The use of Modeling in ESR point of view
is In a service-oriented architecture of business applications, you ideally initially model your application prior to implementation. This means that you can answer fundamental questions such as what components the application comprises of, which services the individual components offer, and how the various different components interact with each other before you begin implementation. A governance process ensures that by using models, all services are always identified and defined in the same way, thus avoiding redundancies.
The models are not system-landscape-specific. Later on, they provide useful information when implementing services, as well as during any configuration that may be required. Furthermore, the models document different aspects of a business process, increase understanding of applications across departments and businesses thereby reducing costs when applications need to be changed or enhanced in a later release.
SAP they integrated ARIS modeling tool to develop Models,but i dont think so its possible to import ARIS models in SAP NetWeaver PI.But whatever models we developing in PI is based ARIS modeling only.
SAP works with this environment to create models for applications in the SAP Business Suite. These models are shipped to customers. You can create your own models in the ES Repository.
Regards,
Raj

Photoshop Starter Ver.3.0

I just installed ver. 3.0 ( I was using Ver 2.0)and I cant get the program to run. It keeps freezing up on "Initializing Model" portion. I tried reinstalling but nothing seems to work. I don't want to delete it as I don't want to lose all my pictures. At this point I'm thinking I should just have stayed with 2.0 but adobe sold me on upgrading. Please HELP!!

I would try uninstalling both applications and reinstalling it again.
Cheers

Oracle Data Modeler Versión 4.1.0.866 -- issue compare model Vs BBDD ( index PK, UK)

Hello,
I have a Data Modeler Relational and physical, the data model has three. The three tables are in a BBDD. The primary key generate is usssing index , and when I generated the DDL only show alter table add constraint .... . until here everything OK.
if I compare the bbdd with Data Modeler , I get differences in indices that generated oracle when I create the primary key.
¿Is a bug or is there some way to fix it by configuration options?
Thanks

Hello,
So you have a Relational Model containing 3 Tables. I assume the Physical Model is for an Oracle database.
The primary key generate is usssing index , and when I generated the DDL only show alter table add constraint .... . until here everything OK.
I assume you are doing a DDL generation of your model (using the Generate DDL button above the diagram or using Export > DDL File from the File menu).
In the DDL Generation Options phase of the DDL generation, can you go to the Tables tab and check that the "Selected" check box for the relevant Tables is selected.
(This should normally be selected, but if you deselected it in a previous DDL generation, it will remember that setting.)
The "PK and UK Constraints" and "Indexes" tabs also allow you to control whether the constraints and Indexes are included in the generated DDL.
if I compare the bbdd with Data Modeler , I get differences in indices that generated oracle when I create the primary key.
¿Is a bug or is there some way to fix it by configuration options?
I assume here that you have input your generated DDL to your database and you are then doing a File > Import > Data Dictionary to compare your database definitions with your initial model.
It is likely that there will be some differences shown, due to defaults used by the database when the DDL is input (e.g storage properties for your indexes and tables).
I suggest you examine the differences (which will be highlighted in red on the Details, Storage Details or Physical Details tabs) for each object in the Compare Models dialog, and provided they are acceptable, select the Merge button to merge them into your model.
If you do not want some of the property differences to be merged, you should unset the "Selected" check box for that property before merging.
Note that it is possible to exclude specific properties from the comparison by selecting the Options tab in the Compare Models dialog, and then selecting the Properties Filter, Physical Properties Filter or Storage Properties Filter tab as appropriate.
I hope this helps.
David

Initializing model photoshop 3.2

Similar Messages

Maybe you are looking for