Initializing with the console doesn't set indexes

Hi,
We want to change the basedn of a suffixe, from o=isp to o=Courrier,dc=domcomponent,dc=com. I exported my data using a db2ldif -U and modified my ldif with a sed. It seems that after I initialized my new suffixe with the console or the ldif2db.pl script, my indexes are not set. It takes many seconds (60) to receive the response of a basic ldapsearch. (e.g.:uid=tom) The db/Courrier/files has been generated during the initialization. After a reindex with the console (it takes 4 hours), the ldapsearch took 0 second to respond. How can I, index while initializing.
I'm running version Sun ONE 5.2 (Sun-ONE-Directory/5.2 B2003.143.0020)

Hi,
Ive experienced the same sort of problem, but have sorted it using either db2index or the console to re-index after initialisation.
According to the docs, re-initialisation should copy down indexes from the MAster server but this does not happen either.
Regards,
g8

Similar Messages

Nexus 1000V. problem when working with the console VMWare

I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.

Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert

By default, does AME render an AE project with the "use no proxies" setting?

By default, does AME render an AE project with the "use no proxies" setting? I use lots of proxies in my files and I want to make sure they are being ignored when I'm rendering in AME.

Adobe Media Encoder encodes After Effects compositions using their current appearance. There is no control the appearance of the composition, with one exception; there is no equivalent to the Render Settings controls in the After Effects Render Queue. If you want proxies to be used, or not, set up your composition for the desired configuration before you encode in Adobe Media Encoder.
The exception to this rule is Guide Layers. In Adobe Media Encoder, right-click on an After Effects composition and choose Source Settings, from this dialog you can control whether or not the Guide Layers in the composition are rendered.

Switchboard, with the attention, 'Doesn't respond!'.-- Adobe Bridge

Hi, if i look in my Activityprogram I see a red line and it's from Switchboard, with the attention, 'Doesn't respond!'. I looked in the details and saw that it is from Bridge. What do I have to do to resolve this problem? Gz, Henri

I found the solution on the web:
Fout: wachten op Bridge CS5 | Het deelvenster Mini Bridge | InDesign, InCopy, Photoshop | CS5

Booting with mode CLI and not with the console.

hi,
On a SF300-08, is anybody knows how to work with CLI and not with the Console Menu Interface ?
Thank you for your help.
Pascal Linglin

Hi Pascal.
Firstly make sure your switch is using the most recent firmware, which is now as of yesterday 1.1.2.0 .
When that firmware is running on the switch, a textview CLI option should be seen on the main menu as per the following screen capture;
to get back to the menu, just type menu from the cli interface.
Hope i answered your question?
regards Dave

Issue with the functions "add matching sets" and "modify matching sets"

Hi,
Though 'None' access permission is set for the functions 'Add Matching Sets' and 'Modify Matching Sets', they are accessible.
Is this a bug with the tool? or am I missing something?
Thanks in advance,
Madan

sorry, missed the version details.
I'm using MDM 5.5 SP6.

5130 will work with the BH 503 head set

I bought a Nokia BH 503 head set before checking out compatibility with my 5130. From what I figured out it would work with it but the buttons might not work on the head set since the specifications on the 5130 does not list having AVRCP. Well I am happy to say it works just fine with my 5130 and all the buttons work like they should. Wondering if that was one of the things added with the up dated software. Did not try it with the old software.

hi there, i have also bought bh503 and possess nokia 5130 xpressmuzic edition.BUt i am not able to pair the devices.everytime i try to connect it says"pairing rejected by device". would you please tell me how did you connect your devices.i have version 7.95 installed on my handset.
Thank you.

Sync contacts to the iPhone 4 with the computer doesn't work

I used to do contact sync before but after I upgraded the IOS to 4.3 and the iTunes to 10.5, my contacts in the iPhone 4 & laptop are not in sync.
Any ideas?

Hello there WayneHope,
It sounds like your camera is not launching at all. I want to recommend the troubleshooting outlined in this article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thank you for using Apple Support Communities.
Regards,
Sterling

I need a little help with the console

Ok, I'm writing a calender class, and i have an add method in it. It basically adds a certain number of days to a certain date and tells you what you get. I'm having some problems getting it to work right so I'm debugging it by having it print out every date as it adds one. Well, the dates I have to use for school (yeah it's a project) are 7 years apart (to include 2 leap years), but when I run the test program the console window is only so big and I can only read what it printed about 6 months back. Anyone know how to make the console window bigger?

Nevermind, I fixed it. Thanks anyway.
(I don't know how to delete this so if somebody else
can, please do)Wrong approach. Tell us what you did, so if anyone will see this at a later stage (like if they had a similar problem and searched the forums), they will benefit from your findings...
Kind regards,
lutha

TS1559 My Iphone 4S with the latest software, wifi setting is grayed out. Could not be resolved even after restore software in Itune.

My Iphone4S wifi setting was grayed off and could not set wifi on even after I have reset network setting and also restore software from Itune.

Hi YKLeong,
Thanks for visiting Apple Support Communities.
It sounds like you may have tried all the steps in the article below. If your wi-fi setting is still grayed out after trying the steps, the article suggests contacting Apple support for help with your iPhone hardware:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Follow these steps to resolve the issue:
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
Additional Information
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
If you need to contact Apple, clicking the link above should take you to the right options for your region.
Best Regards,
Jeremy

Is There A Bug With The Line-In Volume Setting ?

I use an audio mixer and microphone to put voice-overs into programs like Audacity, Sound Studio and the Voice Over Tool in Final Cut Express.
The mixer is connected to the Line In socket on my eMac.
I like to set the Line In Volume to Maximum in the System Preferences.
However, sometimes when I close one of the above programs, the Line In Volume Control reverts to a default midway setting (50%).
This is not a terrible problem but it is irritating having to reset the volume control.
Is it a known problem and is there a cure?
Ian.
PS. I did a search and there was a similar sounding question three weeks ago but for some mysterious reason it was archived before anyone could answer.

I have done some testing in the last 20 minutes and am convinced there is a conflict caused by Final Cut Express 3.0.
I opened and closed Audacity, Sound Studio and iMovie three times each with no problem.
I did the same with FCE and each time the Line In Volume control had reverted to the 50% setting.
So it appears there is a bug (at least with my setup).
Is there a cure - other than resetting System Preferences every time?
Ian.

How do I take the itunes account I established on my lap top and merge it with the new account I set up on my ipad?

I would like to take the music that I have in my lap top - purchased and downloaded, and transfer it into my new account that I established on the ipad.
With 2 different account names and passwords, I am not sure how to connect the 2 - or transfer files from one to the other. My husband has also purchased songs to his ipod touch only - and we want to make one unified file of our music

I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Apple's announcement of iOS 6 said they would allow merging accounts in the future.

Prevent GR with the delivery complete indicator set in the purchase order

Dear friends,
During GR reference to PO, if goods are received partially and the delivery complete indicator is set, the PO line item is deemed to be closed.
However, if reference is made again to the same PO line item, GR can still be done to the item that delivery complete indicator was set.(due to there is still quantity to be received)
Is there anyway, we could prevent reference to be made to a PO line item that has delivery complete indicator set?
Thank you.
Regards.

it is by design that you still can receive material.
See SAPs explanation here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63343943a211d189410000e829fbbd/frameset.htm
The delivery complete indicator only reduces the commitment values to zero.
If you want restrict further good receipts, then you have to reduce PO quantity to equal the received quantity and must not allow overdelvivery. Further you can enter a latest GR date, which will not allow receipt beyond this date.
Locking the item will as well prevent further actions, but this should only be a short term solution, because the PO will still be considered in MRP runs and will never treated as beeing closed. And you will not be able to archive such POs

Can I export clips with the poster frame already set?

Does anyone know how to do this? -
I want to set custom poster frames in FCP and have them remain as the set poster frames in the mov clips that I export so I don't have to open the individual clips in QuickTime and re-set the poster frames from there.
Thanks for any input!

Apparently the low-resolution preview that InDesign creates on first placing the PDF does not store a transparent background. If I recall correctly, this is also visible in the UI.
If you don't have access to the original image, you don't have access to its transparent bits, so you have to think of something else. Would it be enough to treat all white pixels as transparent?

Problem connecting to OIM instance with the Design Console

Hello,
I've got questions about how to use the design console to connect to an OIM instance. I'm not the one who has set up the instance and the one who did cannot help me much. He did give me root access on the machine though.
So first, I'm wondering how do I figure out which port I should connect to. All the doc I can find says that default port is 14000, but I don't understand what it's referring to. I can access to the Web Administration page for Fusion Middleware Control by going to <server_ip>:7001/em. Should I use port 7001? I can figure out that 14000 might not be the correct port because "netstat" does not show anything listening on that port.
My second question is related to the credentials I should use to login to the console. According to the doc and tutorials I found, the user should be xelsysadm. However the person who has set up the instance does not remember having explicitly set a password for this user. Is it possible to log in to the console using the weblogic admin user?
I've tried a couple of things, but nothing has worked so far. I always get an error of some some sort. I always get an Invalid Login, except when I log in with the weblogic user and set the following properties in xlconfig.xml:
ApplicationURL= http://<server_ip>:7001/xlWebApp/loginWorkflowRenderer.do
java.naming.provider.url= t3://<server_ip>:7001/oim
With these config, I get this exception:
javax.naming.NameNotFoundException: While trying to lookup 'ejb.stateful.tcDataBase#com.thortech.xl.ejb.interfaces.tcDataBaseRemote' didn't find subcontext 'stateful'. Resolved 'ejb'
So that's pretty much where I'm at. I can't find any information that can help me, so any hint would be appreciated.
Thanks for your time,
jtellier

try to login in weblogic console the port will be 7001. if you are able to do this then
goto->service->security->realim->select user and groups (try to find the correct path)
create user and then assign administrator groups to this user
login with this user/password into OIM
But for design console you don't need any url. if it is configured. go to <IDM_HOME>/designconsole/ and run xlclient.sh
--nayan

Initializing with the console doesn't set indexes

Similar Messages

Maybe you are looking for