Initilization Issue post system refresh

Hello Everyone we are encountering below mentioned ST22 dump when we try to open any IP related and try to delete/re init, can you please suggest applicaple fix?
Thanks
Abhishek Shanbhogue

Thanks Raman for your response, I have tried replication and activation yet no luck
I am able to open full IPs but when I try to go to delete init requests then it throws this dump
Thanks
Abhishek Shanbhogue

Similar Messages

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

How can we automate the Post system refresh activities

All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
Giri

It all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc

Post System Refresh Activity

Hi All,
I did system refresh ( from PRD to QAS , platform Windows 2008 R2 and MSsql) the system was up and running fine. The system was absolutely fine for one day and the day after the DB crashed , not sure what happened, is there a way i can find the logs through which i can come to know what exactly happened. Also post refresh when i was trying to run BDLS , the job was getting cancelled , the job log showed there is another conversion already running , when i checked the tables the conversion had already happened . Please tell me can running BDLS which cancelled many times could be the cause for the DB crash, if yes where can i find the logs for this , if not what else could have happened that the DB crashed . Thanks for your responses in advance.
Regards
Mrigank Aditya

Hi Nainesh,
Thanks for the message , yes system is up and running fine , the DB team did a restore of Production data on Quality again , and i did the post refresh activities again , the issue what had happened last time was we were doing simultaneous refresh of two systems at a time , BI prod to BI qas and ECC prd to ECC qas , we had found a list of tables in BDLS which gets updated when we run BDLS and we run those tables only , unfortunately the files got exchanged , the ECC tables should have run on ECC machine and BI tables should have run on BI machine which didn't happen and it happened the other way round BI tables where run on ECC machine , due to which BDLS failed and the job got cancelled many times, which impacted the whole system conversion and logical update , which crashed the DB( i exactly don't know the reason what happened internally , still searching for it ) . At present the machine is up and running fine.
Regards
Mrigank Aditya

JSPM patching issue after system refresh

We have recently done a System Refresh of Java-Addin box from a source system whic was on SP-13 on to a target system which was on SP-14.
After the refresh we found the target system is now on SP13.   When I tried to apply SP-14, JSPM reports that the patch is already applied. How do I go about ? Does this mean that SP-14 is already existing. How to make the system recognise that the current patch is on SP-13. What needs to be done?
Thanks in advance.
Umamahesh

This is not a bug in JSPM, if the System Refresh is done through SAPINST you shouldn't have such issues.
I think that since some of the files in J2EE are not updated after the manual system refresh and JSPM must be pointing to the earlier Patch level.
Especially files under ..../bootstrap/SAP AG are not updated
In JSPM by default the forcemode is disabled so given the manual way to enable the option
Hope this is clear
Regards
Shaji

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

Transports Issue after system Refresh

Hi All,
Recently we performed a system refresh from our Production to Development system. It is SAP ERP 6.0 ehp5 system. The refresh was successful however we are seeing issues related to STMS.
1. In our development system we are unable to use SCC1 to move transport from one client to another. The following is the dump.
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_SDB_ORA_PROGRAM_ERROR
ABAP Program           CL_SDB_ORA_UPDATE_STATS=======CP
Application Component BC-DB-ORA-CCM
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SQL_EXCEPTION", which was raised in the program
"CL_SQL_STATEMENT==============CP",
specifically in line 24 of the (include) program
"CL_SQL_STATEMENT==============CM008".
The cause of the exception was:
ORA-20003: Specified bug number (16470836) does not exist#ORA-06512: at
"SYS.DBMS_STATS", line 23922#ORA-06512: at "SYS.DBMS_STATS", line
23973#ORA-06512: at line 1
2. We are not able to see the sub request record for the transports is missing in E070 table for the TRs which were created before refresh.
Please provide your inputs and help us to resolve these issues.
Thanks!

Hi
Why do you mean by "system refresh from our Production to Development system"
DB copy or client copy ?
Based on the problem you have it must have been a DB copy.
As you might know this is not recommended by SAP, you should at least have exported the object versions as stated in the here under note.
I hope your TMS domain controller was the production system...
It is normal that you did loose data in the CTS tables as you overwrite all CTS tables with the data from production, thus orders created in DEV that were not released should have been erased.
I'm afraid your problem could be tougher than a simple Oracle error...
For the Oracle error could you try launching system statistic and see if you get the same error
brconnect -u / -c -f stats -t system_stats
Why did you perform that refresh, client copy could have been a safer alternative.
Regards
130906 - How can versions be transported?
You want to copy the versions of the repository objects from one R/3 system into another, for example because you are planning to copy your production system to your development system.
Such a procedure does not correspond to the strategy recommended by SAP, to always retain the development system.

Post System Refresh Activity - BDLS run

Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
Abdul

Hi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang

Post System Refresh

Hi Guru's,
I needed to know what are important BI steps to go through (for system check up) after the system refresh.
In this case, the testing box has been refreshed from the production.
Thanks, Akash

hello,
After the refresh, the connection with the source system gets lost.You need to:
1.restore source system connection
2.activate and replicate datasources
3.Run program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer struture
4.If you had not transported certain objects from QA to prod. You will need to retransport them.
have a look at 4 possible scenarios and check the strategy at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Check these notes: 140276 and 325470
to know the other possible notes for this,have a look at:
/message/3030702#3030702 [original link is broken]
Reg,
Dhanya

RSA1 issue after system refresh

Hello all,
I am not sure if this is the right forum for my issue but i will give it a try. Here is my situtation:
we recently refreshed our SDX sandbox apo system from DEV. No other systems in the group were refreshed , target systems or others were not refreshed in parallel. As a post refresh step, just like in BW, I had to go to RSA1> right click on the source sytem (pointing to old logical name DEVBI)> and then restore. So now, the new Sources sytem for SCM is supposed to be Sandbox BI (SBI) which is fine ,and the source system connection is also working good. But when we perform search for SBI datasources in RSA1 .it display 2 entries for the same datasource..one with SBI source system (which is correct) and another one with old source sytem (DBI, which is incorrect).. So we see the duplicate entries for the same datasource with 2 logical system names (old+new). Also, we are unable to replicate datasources for the SBI source system, it says DBI source sytem does not exist. I am not sure why this DBI source system's logical still there. Can anyone please share if they have ran into similiar issues? if so How can i get rid of this old logcial names from RSA1 from datasources ,that is DBI.
BTW, RABASIDOC and RSLOGSYSDEST table entries are showing correctly. Again, BW is the source system here.
Thanks,

Durgesh,
Thanks for your suggestion. Actually I did run BDLS and didnt manually create the source system in RSA1. I just had to restore the existing one and everything went fine, the source sytem checks good. But the issue still exist. The old Source system Logical name (DEV BI) still shows when searching for datasources in RSA1, so the search result displays the same datasource entry twice one associated with old Source system LSN (DEV BW in this case) and another one asscociated with the correct Source system logical name. And when we try to replicate datasources it gives error "DEV BI source system does not exist". I checked all related tables such as RSBASIDOC..and its showing correctly.
Can anyone please suggest why there the old source system logical name is still coming up? and how can this be resolved? Thanks.

Wily introscope issue after System refresh in solman 7.1 Sp11

Hello experts,
Unable to remove old Production wily in quality system.
An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
Unable to unassign or delete old wily introscope
Thanks ,
Rahul Yedapally

Hi Rahul,
Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
and all so make sure RFCs WEBADMIN , SOLMANDIAG and
NONE are working fine in SOLMAN.
Thanks,
Prakash Reddy Maram

Query Designer Issues Post System Copy

Hi All -
We have just performed a system copy from our production to our QA systems. Now, when we trying to view a report from Query Designer in our QA environment, we are being prompted for a username and password - which is trying to log in to our production environment! (I know this because I locked myself out of production trying to log in via our QA Query Designer). We've done all the BDLS runs, updated the RSLOGSYSDEST table poer OSS note 524554, and also updated the tRFC port in WE20. What do we need to do to be able to run a query out of the BW QA system?
Thanks for the assistance.
Abby

Hi Abby,
Once you execute the query from designer you will get one URL generated in the explorer address bar here you will have to change the name of your production app server with quality app server then report will be executed on quality server.
But this is temporary solution, you will have to check with your basis team regarding this and they will have to change some setting in system table and next time onward the system will pick proper URL.
Regards,
Durgesh.

BW system refresh

Hi All,
We are facing issue in system refresh.
Major Steps performed
1) restored prod db to qas.
2) before bringing up the application deleted rfc tables
3) after bringing application back imported the rfc tables back into system
4) run bdls for BW system BWPCLNT100-BWQCLNT100 but not for R3
5) created back the connection in RSA1
I got to know that we don't have to delete rfc, and run bdls for r3(source
system) too before retaining rsa1 but we missed the step, now if we run
bdls for r3 and execute rsa1 and restore and activate would it help us in
getting the desired refreshed system.
Please suggest.
thanks,
Mridul

Yes, you need to BDLS for R/3 logical system in the target BW system(once this is done run RSA1 )
Also no need to delete the RFC's ,simply you import the RFC's that were exported before refresh from the targget system.
Regards,
Srini Chapa.

SDCCN settings after system refresh

Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
Satya

Hi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani

Initilization Issue post system refresh

Similar Messages

Maybe you are looking for