Inject Drivers step fails, DISM application error

We've been imaging Surface 3 tablets for a while with SCCM 2012 R2 CU4 since CU4 came out. Recently the task sequence is failing while applying drivers. On the screen is a DISM.exe application error.  
"The instruction at 0xa7356ccc referenced memory at 0x258d1a58. The Memory could not be read"
The SCCM task Sequence Error is 0xC0000005
I cannot find a DISM log, probably because it's an application crash. The SMSTS Log isn't much help either.
I've changed from apply driver package to auto-apply, refreshed Distribution Points for the driver packages and the boot images.
Our Windows 7 Task Sequences are unaffected. Seems to only be the Windows 8.1. 

If you have UEFI enabled, have a look there:
http://deploymentresearch.com/Research/Post/333/Deploying-Surface-2-Pro-with-ConfigMgr-2012-SP1-CU3

Similar Messages

  • MDT 2010 - USB 3.0 issue after OS Install and Inject Drivers steps

    Hello,
    I'm using MDT 2010 and I'm booting and image PCs from a USB drive. On some newer systems (eg: Latitude El530) I have issues when I use the USB 3 ports (if media is connected to USB 2 port, everuthing is fine). The systes recognizes the USB stick and I can
    start the Task Sequence just fine. I pass the Install OS step and Inject Drivers step, but after the first reboot, I get the prompt to insert the media to continue the deployment. This happens only if the stick is connected to the USB 3.0 ports. If I
    check Device Manager, I see the USB device withouth driver. The drivers are already on the USB stick...I puled them from FileRepository from an updated system with all the drivers. Is anyone else having similar issues? I see other people have USB 3 issues,
    but mostlly to start the deployment from it, or at partitioning...I don't have that issue. My issue starts after the OS is installed.
    Any sugestion is appreciated...Thank you...
    aburica

    You should be able to do this.  nVidia Optimus video drivers have the same issue.  How we solved this
    We create selection profiles for each make and model
    We inject every single driver in profile for each make and model
    The Optimus driver then gets installed because it is local to the machine already.
    Why it didn't work before is the child device never gets detected during the PNP enum that happens when you have 'Install only matching drivers from the selection profile' so never ends up in the local driver store.
    P.S. We ONLY have the drivers that install imported into each make model folder.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    How to ask a question that is fixable.

  • Inject Drivers Task Sequence Step vs Using DriverSelectionProfile in Database

    I'm using a Database and 'Make and Model' in MDT 2012. I wonder if I specify a DriverSelectionProfile in the Database, what happens when the Task Sequence reaches the Preinstall > Inject Drivers step? Does it process the selection there and ignore the
    Database settings? Or should I disable this step in the Task Sequence?
    Orange County District Attorney

    If you are having driver folders that are named after the computer models a single line is enough. MDT will replace the variable with the real model name. If you only deploy Windows 7 SP1 x64 you can set in the CustomSettings.ini file.
    [Default]
    DriverGroup001=Windows 7 x64\%Model% 
    If you deploy multiple operating systems (Windows Server 2012 R2, Windows 8.1 and Windows 7) it's easier to set it in the task sequence instead.
    / Johan
    Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

  • How to catch SAP application errors in BPM.

    Hi,
    I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
    Thanks,
    Bhargav

    Hi Gaurav,
    As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
    In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
    I need to proceed further and capture this error to an RFC Structure and call a proxy.
    Here after the error it does not proceed to the next step.
    Thanks,
    Bhargav

  • **SOLUTION** DLLML.exe Fails to load at startup (application error)

    Hello everyone!
    I purchased the SB X-Fi Fatalty Champion Edition soon after release, and think this is the best card I have ever used to date. Absolutely love it, unbelievable sound.
    Now a year or two ago I noticed a certain file failing to load when I started windows.
    This file, DLLML.exe. To my understanding this file is used to load EAX emulation support into older games/modules (essential loads a "middle-man" file between the game's sound files/.dll's, and the hardware SPU [Sound Processing Unit, not a real acronym, but that's what I call it since GPU and CPU are similar distincti've acronyms so if you see it used anywhere, it came from me ] to allow EAX support in non-EAX enabled games), and/or to add EAX effects in your audio files using the Wave Studio app.
    I've pinpointed this issue to either a Windows Update, or the Creative auto-update (which could mean it is an error caused by an installaion combination of multiple apps at once) because this issue did not arise until I did these two things (did Windows Update, then Creative Auto-Update, then restarted computer).
    Now I've primarily had this issue with Windows XP x64 but I have had this issue at times with Windows XP x86 as well.
    After you install the software suite, it adds an entry in your Windows Startup to load the module (Start/Run. msconfig. Startup tab. Look for STARTUP ITEM: DLLML). The entry looks like this:
    WinXPx86 looks like: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
    WinXPx64 looks like: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
    Under most circumstances this module loads fine, but because Creative, for reasons why I have not delved into, loads some of their DLL files differently than the Windows standard, which may also be a cause of this issue (extremely unlikely, I believe it is one of the 2 things i mentioned above).
    Either way, after I did those 2 things, the DLLML.exe startup entry failed to load every time.
    But I fixed it.
    Now what you have to do to resolve this issue, involves editing the startup entry in the Windows Registry.
    If you are scared to go into it, have no idea what I am talking about, or never edited the Registry before, don't worry. If you follow these steps EXACTLY, you have nothing to fear.
    I will be using default installation parameters for file pathing, so if your Operating System is installed in a different dri've letter other than C:\, then just change the letter to the one your OS is installed onto.
    Capitals used for emphesis on actions to take:
    -Hit the START button, then select RUN
    --------If RUN is not in your start menu, you need to enable it by right-clicking and open area of your TASKBAR, select PROPERTIES. --------Click the START MENU tab, then the CUSTOMIZE button. Click the ADVANCED tab. In the START MENU ITEMS box, scroll down to the entry that says SHOW RUN. Check the checkbox to fill it. Then OK/APPLY/OK, and you should be back to the desktop. Then go to START/RUN
    -type the word REGEDIT
    --------This opens the Windows Registry.
    --------DO NOT change ANYTHING in this other than the exact directions I specify or you may corrupt your registry or even worse, corrupt your system, which means F&R time (Format & Reinstall). Treat it like a stripper. You can look all you want but don't touch or there could be dire consequences.
    --------Now the fastest way to find this is to manually navigate to the specific "key" or "entry" you need to modify. Mouse-click the +'s to navitage further into the "hi've" following these maps:
    -FOR WINDOWS XP x86 USERS NAVIGATE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
    -FOR WINDOWS XP x64 USERS NAVITAGE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Microsoft\Wind ows\CurrentVersion\Run
    --------Now you are looking for a specific entry NAME called RCSYSTEM. Depending on which version you are running. They are:
    -FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
    -FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
    -------Now we are going to edit the entry. What we need to do is get rid of that * (asterix) character in the name. I don't know why it is there, I'm thinking it may be a coding error. But in my WinXPx64, this was the culprit.
    -Double-click the RCSYSTEM key to edit it, and edit it so it looks EXACTLY LIKE THIS (If you're paranoid about doing something bad, COPY and PASTE this line pertaining to your installed OS. KEEP IN MIND THE INSTALLATION DRIVE LETTER, CHANGE FIRST LETTER IF NESCESSARY)
    -FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
    -FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
    -click OK button. Now it is changed.
    -------And we're DONE EDITING the Registry entry!
    -now go to FILE in the top-left menu, then select EXIT
    -RESTART your computer
    -------You should not receive the "DLLML.exe failed to load" (application error) again!!
    To check to see if it loaded into your system properly (as if not getting the error message anymore was proof enough it loaded properly), when you reboot back to the desktop, do the "three-fingered salute" (ctrl-alt-delete), then select the PROCESSES tab. Click on the IMAGE NAME heading to sort it alphabetically, and look for the name (WinXPx86) DLLML.exe or (WinXPx64) DLLML.exe *32.
    If you see it listed, it loaded!! CONGRATS, IT BE FIXED!!
    If this did not work for you, then your system is posessed, get a priest. I don't think a witchdoctor would give your comp good vibes O_o
    Hope this resolved it for you. Enjoy your EAX with Duke Nukem 3d again!
    EDIT: As a side note, I also noticed that since after this fix, my computer doesn't hang after sending the restart/shutdown killsignal, so I am wondering with people having similar hanging issues, if their issue could be resolved something similar to this.
    Just a thought for any admins/mods/users out there that know what they are doing that maybe wanna test that out.
    Sincerely,
    Jason Ostapyk
    3yr degree, MCP, CCNA, A+ certified, Specialised Electrician Class M Licensed

    G Kudos for a brilliant finding! After a Windows Hotfix on my XP SP3, when shutting down my PC I would wait for a program and then get an error that EAX was not responding before finally shutting down. On next reboot I lost sound on my PC. After running tests, the Direct Sound test failed pointing at EAX.
    This solution cured the problem. Again, kudos, job really well done!!!

  • Satellite A300D-1EI - blue screen error - display drivers had failed

    I 've bought my laptop a month ago.
    Everything is working great except two "blue screen" errors caused by the graphics card.
    Both were when the laptop was connected with TV through S-video port.
    First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
    All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
    I am wondering if this is a driver's problem or is something wrong with my graphics card.
    System Info:
    Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
    Memory (RAM): 3.00 GB
    System Type: 32-bit Windows Vista Home Premium
    Display Adapter: ATI Mobility Radeon HD 3470

    So long you use ATI driver from ATI support page there is no possibility to say anything about it.
    This driver is not tested and Toshiba cannot offer any help about it.
    So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
    Test it please and let us know if the problem persists.
    When you want to watch movies on TV at first switch to the TV and then start DVD player.

  • Send Synchronous step in BPM - showing application error in sxmb_moni

    Hi
       We have a cc bpm in which we have a send - syncrhonous step - a call to an external webservice and synchronously getting a response back.
    Now, owing to a application condition when invoking the  webservice , the response received after being mapped back into the BPM, the status is set is being set to application error ( without a restart ) in sxmb_moni and the bpm gets  a response in the fault structure from the webservice
    My understanding is that the web service implementation sets this application error status after sending the appropriate response in the fault structure  . We want the cc BPM to continue to the next step - which is - taking this response in the fault structure from this webservice and communicating it out - in another send step.
    But owing to the application error in the synchronous send step , the BPM instance stops right there without proceeding to the next send step - after this ?
    How do we make the cc BPM not stop after getting the fault response and the application error ?

    Insert an Exception Branch by rightclicking on the block and choose insert.
    In the send step under Exceptions you can point to the created exception branch.
    In the exception branch you can now handle what to do when it fails.
    Edited by: Christian Vilhelm Henriksen on Mar 16, 2010 1:09 PM

  • Error Message: "Install Step Failed:run postflight script for Plugin" When Flash Player 11.7 instal

    Don't See Question/Problem w/Flash Player Installation.  Error w/11.7.700.260 Installation had errors (dialogue box)  The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance.  Please Note:  I have read all Adobe Links related to installing Flash Player and uninstalling previous version 10.3 for MAC OS 10.5.  So I have MAC OS 10.5.8 w/Firefox Browser 16.0.1 and disabled anti-viral software.  Uninstalled previous version of Flash Player 10.3.  Confirmed uninstallation.  Downloaded Flash Player 11.7.700.260  instead of 10.3.183.90 due to Adobe stated information re:replacement of 10.3 versions with 11.7 extended support.  Installation of 84% occurs then the Error Message: Installation had errors (dialogue box)  The following install step failed: run postflight script for Plugin.Contact the Software Manufacturer for Assistance.  Please help to resolve this issue as no flash player is currently on my MAC.  Thank you so much.

    Hi Mike,
    First of all, thank you so much for responding and sorry I forgot to mention my CPU; fortunately I **DO** have the 2.6 GHz Intel Core 2 Duo Processor so I could upgrade to Mac OS X Snow Leopard.  Two Questions:
    1. Do you know whether Snow Leopard sold by Apple is an upgrade or "clean install?"  If it's not a clean install, do you know (off-hand) if there are any upgrade issues?  I'm very partiall to a clean install.
    2.  Why does Adobe state (for updating Flash Player 10.3 when Adobe knows that [most likely] the 10.3 versions run on Mac OS 10.5.x?  See statement and link below...
    Kindest thoughts - Karolynn_1
    http://blogs.adobe.com/flashplayer/2013/05/extended-support-release-updated-to-flash-playe r-11-7.html
    We’re happy to announce that we are updating the version of our extended support release to Flash Player 11.7 on Mac and Windows. Flash Player 11.7 will replace version 10.3 as the extended support version beginning July 9, 2013.
    In order to continue receiving security updates, an upgrade to either Flash Player 11.7, or the standard Flash Player 11.8 release is required.
    Flash Player 11.7 provides exciting new features, including Actionscript concurrency, webcam support for StageVideo and more. It also enables Protected Mode for FireFox on Windows, a sophisticated security-in-depth feature. With Protected Mode, Flash Player runs as restricted process, making it more difficult for attackers to build working exploits. Click here to learn more.
    Flash Player 11.7 leverages hardware acceleration for audio, video and rendering to increase performance and lower CPU usage.
    To ensure the smoothest possible transition, we encourage IT organizations deploying Flash Player 11.7 in managed environments to thoroughly test audio and video playback for critical use-cases using the latest available version before deploying this release widely. When hardware-related playback and stability problems do arise, updating to the latest hardware drivers frequently resolves these issues.As a secondary workaround, the Flash Player Administrator’s Guide details mechanisms for disabling hardware and audio acceleration via mms.cfg.
    We have been hard at work to make Flash Player better than ever, and we look forward to continuing to serve you with a great web experience.

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Creating Job with CmdExe Step failed with error Reason : 5

    Hi, I setup a job with Type = Operating System (CmdExec) and Run as 'SQL Server Agent Service Account' , it failed to run with Message below :
    Message
    Executed as user: PROD\sqlserveragent. The process could not be created for step 4 of job 0x5A83AE4A12AEF649888E85F4072604F6 (reason: 5).  The step failed.
    1. I couldn't find what is meaning of Reason 5 here.
    2. This step used to work previously and it 'not working' suddenly these few days. I wondering anyone make the changes but I am not able to trace it. Any guide to troubleshoot would be helpful.
    Thanks .

     Operating System ... (reason: 5).  The step failed.
    Operating System Error code 5 = Access denied, seems to be a permission issue.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Job scheduling error : The return value was unknown. The process exit code was -1073741819. The step failed.

    I am working in Sqlserver 2008 R2, SSIS 64 bit version
    I am getting the below  error while scheduling the job in the development server  Database. 
    The return value was unknown.  The process exit code was -1073741819.  The step failed.
    The SSIS front end execution runs fine.
    Have anyone  faced this issue before?

    Hi Venkat,
    If you already changed to 64bit and still doesn't work then create proxy account.. 
    To create a proxy account
    In Object Explorer, expand a server.
    Expand SQL Server Agent.
    Right-click Proxies and select New Proxy.
    On the General page of the New Proxy Account dialog, specify the proxy name, credential name, and
    description for the new proxy. Note that you must create a credential first before you create a proxy if one is not already available. For more information about creating a credential, see How
    to: Create a Credential (SQL Server Management Studio) or CREATE CREDENTIAL (Transact-SQL).
    Check the appropriate subsystem for this proxy.
    On the Principals page, add or remove logins or roles to grant or remove access to the proxy account.
    Thanks

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • OIM 11g installation failed: Error Restart domain step failed

    Hi,
    I'm stuck in OIM installation at the following point. Please help.
    Here is the description of error:
    Bootstrap Domain Configuration
    Log
    Config Action Bootstrap Domain Configuration started
    Create Domain
    Log
    Create Domain
    Step Create Domain started
    Create Domain
    Step Create Domain ended successfully
    Create ODS Managed Server
    Log
    Create ODS Managed Server
    Step Create ODS Managed Server started
    Create ODS Managed Server
    Step Create ODS Managed Server ended successfully
    Create OIF Managed Server
    Log
    Step Create OIF Managed Server started
    Step Create OIF Managed Server ended successfully
    Stop Managed Server
    Log
    Stop Managed Server
    Step Stop Managed Server started
    Stop Managed Server
    Step Stop Managed Server ended successfully
    Apply Java Required Files
    Log
    Step Apply Java Required Files started
    Step Apply Java Required Files ended successfully
    Apply EM Template
    Log
    Step Apply EM Template started
    Step Apply EM Template ended successfully
    Restart Domain
    Error
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
    Step Restart Domain failed
    Log
    Step Restart Domain started
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
    Step Restart Domain failed
    Following is the description from the log file: C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-15_02-17-54AM.log
    [2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0]
    [2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0] [[
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:830)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1105)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)
    Thanks in advance for help.
    Thanks,
    Prasad Shinde

    Your problem sounds somewhat like mine, although not exactly. In my case it seems as if my CD/DVD drive didn't like the hologram on my Windows XP install CD. I solved this by using Disk Utility to make a disk image of the Windows DVD and then burning the disk image onto a new DVD with an opaque "label". That solved that problem.
    A further problem occurred after that. When I got to the screen that told me to hit "Enter" to start the installation process my keyboard was unresponsive. I solved this by buying a cheap Windows keyboard. That solved that problem and I now have Windows XP running just fine.
    I think that you'll find that Apple tech support isn't very responsive to these sort of problems. I don't have Apple Care but was willing to pay my $49 for tech support. I ended up talking to a "Boot Camp specialist". He was polite but told me that it was "a windows problem" and that Apple didn't support Windows. I agree that Apple can't support windows but it seemed like my two problems were "Mac problems". Anyway, after tearing my hair out for 4 days I finally got it done. I have to admit that I'm not happy with apple tech support.

  • Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

    Hello,
    I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
    Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
    If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
    upgrade steps run to completion.
    Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
    the issue here. Any ideas?
    I've found also here
    http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
    suggestions for similar issue with SQL Server 2008 which that I should do:
    Via ssms:
    From msdb:
    Delete:
    dc_admin role
    Dc_operator role
    Dc_proxy role
    UlitityCMRReader role
    UtilityIMRReader role
    UtilityIMRWriter role
    but for not I didn't tried it yet. This is standalone SQL Server instance.
    Any help really appreciated.
    Regards

    Script returns the same error.
    System databases:
    1    1    760    -1    10    1048578    0    1    master        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    2    0    12768    -1    10    1048642    0    1    mastlog        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    1    1    1024    -1    10    1048578    0    2    tempdev        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
    2    0    64    -1    10    1048642    0    2    templog        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
    1    1    288    -1    128    2    0    3    modeldev    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
    2    0    4464    -1    10    1048642    0    3    modellog    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
    1    1    28936    -1    10    1048578    0    4    MSDBData    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
    2    0    3352    268435456    10    1048642    0    4    MSDBLog    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
    are all in place where path shows.
    Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
           SELECT physical_name
           FROM master.sys.master_files
           WHERE (name = N'master')
    it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
    this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
    EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

  • Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

    Win XP Home SP2
    Installed Firefox, but receive the following error message:
    firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
    Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

    Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
    This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
    There is a link and an excerpt below which could be worth checking in your case,
    particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
    Have a look here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=712960
    and the post to read:
    '''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
    "Created attachment 583905 [details] [diff] [review]
    Add the Win32 redistributable directory to the mozconfigs"
    "Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
    "If you're seeing this then you want to copy the following files from a Firefox installation:
    Microsoft.VC80.CRT.manifest
    msvcm80.dll
    msvcp80.dll
    msvcr80.dll
    The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
    .... ends....
    The earlier 2006 instances also had the same issue in some cases:
    forums.frontmotion.com/viewtopic.php?f=10&t=393
    Hope this progresses the search and resolution.
    Cheers

Maybe you are looking for