Ink black won't come out printing my tax filing.

I was gonna plan to do tax filing and needed to print out but ink black won't come out... i have to clean cartidige with tissue paper with alcohol... but won't working... black ink appers half plently of more ink inside. What I am going to do with that?
 Please let me know asap! Thank you. 

Hi @deafchubbbear77,
Welcome to the HP Forums!
I'll do my best to help with your Deskjet 3052a not printing black ink
Please start with the steps within this Fixing Print Quality Problems for the HP Deskjet 3050A (J611) All-in-One Printer Series document.
If that doesn't seem to do the trick you may want to try cleaning the cartridge contacts, but make sure to just use water. Alcohol will dry out the contacts and may cause further problems in the future.
If that still doesn't work, that black cartridge may need to be replaced. To see if it's eligible for replacement, contact our technical support team via phone and inquire.
Let me know how things go for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • IPod Touch 3G in DFU Mode and won't come out

    Hello,
    My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
    I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
    1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
    2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
    3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
    4) Attempted to exit and re-enter DFU mode several times to no avail.
    5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
    My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
    Message was edited by: kander1625

    Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
    So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

  • Toner won't come out LaserJet Pro 400 MFP M425

    toner won't come out LaserJet Pro 400 MFP M425. It's stuck inside.

    I am sure it is stuck on the right side.  Odds are also that it is an aftermarket toner and not an hp original.  That said it will not be easy to remove.  You will have to do a google search for the service manual.  The right side cover needs to come off and it is not easy since the back, top and control panel need to come off.  Once you have the right side cover off you will see a big while gear behind the metal plate that holds the gear assembly to the right side.  You need to turn that gear by hand a little and it should free up the toner to come out.  When you remove the toner you will see a sort of bell housing metal piece that hangs on the right side of the toner.  That assembly fits down the right side and locks into the mech that turns the toner drum.  If that piece has defect it gets stuck.  Good Luck.  First thing I would try is to unplug the printer, then plug the printer back in and let it come to ready and open the door to see if the toner now comes out.  Sometimes turning the printer off and then back on will turn that gear by itself and free that piece.

  • Jail-broken iPhone 4S won't come out of recovery mode after attempted ios 7 update

    So I've had my jail-broken iPhone for a while and decided to go for the ios 7. After deleting 200 songs, 400 pictures & videos, and countless apps and other useless data to get the necessary free space to upgrade, I was finally able to download it. It went into recovery mode (showed the iTunes logo and the USB cord) shortly afterward. I plugged in my iPhone to my laptop, iTunes came up, but as I tried to restore the phone to upgrade to the ios 7, an error appeared saying the "iPhone software update server could not be contacted or is temporary unavailable". I've tried a LOT of stuff, from simply restarting my laptop to trying DFU mode like 200 times, and it keeps saying the same thing. Now I'm basically phoneless because it won't come out of recovery mode.
    Does this have anything to do with it being jailbroken and not backed up prior to attempting to upgrade? Please help!

    Yes, it is directly related to j'breaking it.  And as such, you will get no further support from Apple and we cannot help you either.  Use an internet search to try to find a solution elsewhere.

  • How do I eject a CD that won't come out of the optical drive.

    How do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus. Any ideas...?

    reboot while holding down the mouse/trackpad button until the disc ejects.

  • New Mini - Firewire plug is stuck and won't come out

    Hi,
    This is a virtually new Mac Mini; A firewire plug from my 20" Cinema display is stuck in the firewire port and won't come out. (I'm trying to disassemble this mini to move to another location.)
    I'm trying very hard not to pull too hard because I don't want to damage the firewire port. But I don't know what to do - it's just stuck and won't come out.
    Any ideas? Many Thanks,
    Frank B.

    Well, I finally got it out after fiddling with it, and walking away several times. I had to make sure I didn't damage it, so I approached it very gingerly.
    How did I get it out? It's amazing what actually worked. What worked was grasping ONLY the firewire chord about 1 to 2 inches away from the plug and pulling Only on the chord straight out.
    Doing it this way, it popped out with very little resistance. Strangely, the Apple Cinema Display firewire plug almost seems to click when you plug it in.
    So I immediately tested a generic firewire plug (non-Apple related) and it plugged in and pulled out with no problems or resistance whatsoever.
    "This completes my test of the Apple Cinema Display Firewire plug." (a joke there)

  • I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

    I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

    Well the iPod is supposed to be synced from YOUR iTunes music library, if you used other means to put music on there then the iPod is going to sync to only what's on your itunes music library when you connect it.
    You need to put the files into itunes.
    Far as your other issues, sounds like the drive is dying.
    Check this support article for assistance
    https://support.apple.com/kb/TS2380
    http://reviews.cnet.com/8301-13727_7-10329819-263.html
    search online for that number.

  • My Ipod touch won't come out of recovery mode or appear on Itunes!!

    My Ipod gen 5 won't come out of recovery mode. When I plug it into the computer, the ipod device won't show up on itunes and I have tried closing it, and it still wont show up on Itunes or get out of recovery mode! Please help me!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201210 What do I do if my iPhone 4s won't come out of recovery mode?

    My iPhone 4s won't come out of recovery mode. I don't know how to fix it.I have tried holding the home button and power button for 15 seconds. It didn't work. I just need some advice.

    You may need to do this several times http://support.apple.com/kb/ht1808

  • My laptop won't come out of sleep

    I have the Macbook Pro w/ retina display and whenever I go to open it, my laptop won't come out of sleep and I have to hold the power button to turn it off then back on again. I have to do the same thing if I walk away from it for to long and the laptop goes to sleep except this time when I bring it out of slepp it just shows the enter password for user screen but it is frozen. I got my laptop on the 8th of June 2013 so it is practicly brand new. Does anyone know how to fix this problem.

    Brand new out of the box this shouldn't happen. Bring it to an Apple store or AASP.

  • Call of duty black ops has come out on mac, and the system requirements say 2.4ghz is needed, i only have 2.3ghz, do you think the game will run okay? thank you

    Call of duty black ops has come out on mac, and the system requirements say 2.4ghz is needed, i only have 2.3ghz, do you think the game will run okay? thank you

    This is too generic of a statement. They are working on support for the 2012 MacBook Pros and because of the better architecture in the 2012 machines a 2.3GHz machine may perform well.

  • My iMac goes into sleep mode, won't come out until I unplug and replug the computer then hit the power button. Just hitting the power button alone won't restart the iMac.

    My Imac goes into sleep mode but won't come out.  The keyboard/mouse won't rouse it and the power button won't do it either.  I have to unplug the computer, re-plug it in and then hit the power button.  Help?

    I looked around the internet and found an old post that seems to have solved the problem.  I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared.  I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

  • X301 problems after installing driver updates - won't come out of sleep mode

    We have a new X301 with Vista 32 installed. Things were working fine until I ran system update the other day. I've set the power options so not shutdown hibernate, however, after a period of time the system seems to go to sleep or to a screen saver and will not come out of whatever state it is in. The only solution is to power off/on the system.
    I have an X500 where there were display driver problems if there was an external monitor (dual monitor) attached. The only thing I can think of is that either there is some similar issue with the X301 since we have an external monitor attached or there is something that was messed up with the drivers that were installed. I do have (for now) restore points before these drivers were installed but I'm not ready to take that drastic step yet (or a full system restore and start over).
    Anyone experience this type of issue or have any suggestions?
    Thanks
    Neil

    Sadly, I had the issue resurface today. It went into standby/sleep mode while I was in a meeting (on battery power), and later I tried to wake it, and all I got was a black screen with a mouse cursor.
    The keyboard brightness and volume keys on the keyboard were responsive (I could hear the audio level clicks as I changed it), but the visual overlay didn't show (where it shows the white speaker graphic with the bar of rectangles representing volume level). Also, the screen brightness keys did nothing.
    I finally used Ctrl + Cmd + Power to force a restart. Luckily, my user account didn't get completely hosed like it did a couple weeks ago.
    So, it looks like Migration Assistant isn't the culprit here. This is the system I just finished rebuilding. So it's either a bug in OS X/Mavericks, or it's due to an application I have running, or a configuration change I've made.
    It seems to only happen when I'm on battery power, for what that's worth. I don't recall it ever happening when I'm plugged in. I have Power Nap disabled while on battery power, btw.
    I'm going to enable SSH access so I can try to SSH in the next time this happens. Perhaps that will provide useful diagnostic info.
    Anyone have any tips or suggestions?

  • After maverick update mac won't come out of sleep

    After I updated to Mavericks my macbook pro wont come out of sleep modes, I will close the screen or let the computer go to sleep from inactivity and i can see that its breathing but it wont come out of sleep mode and than requires a hard shutdown. It also takes a very long time to reboot and/or restart as it sits on the gray

    Sadly, I had the issue resurface today. It went into standby/sleep mode while I was in a meeting (on battery power), and later I tried to wake it, and all I got was a black screen with a mouse cursor.
    The keyboard brightness and volume keys on the keyboard were responsive (I could hear the audio level clicks as I changed it), but the visual overlay didn't show (where it shows the white speaker graphic with the bar of rectangles representing volume level). Also, the screen brightness keys did nothing.
    I finally used Ctrl + Cmd + Power to force a restart. Luckily, my user account didn't get completely hosed like it did a couple weeks ago.
    So, it looks like Migration Assistant isn't the culprit here. This is the system I just finished rebuilding. So it's either a bug in OS X/Mavericks, or it's due to an application I have running, or a configuration change I've made.
    It seems to only happen when I'm on battery power, for what that's worth. I don't recall it ever happening when I'm plugged in. I have Power Nap disabled while on battery power, btw.
    I'm going to enable SSH access so I can try to SSH in the next time this happens. Perhaps that will provide useful diagnostic info.
    Anyone have any tips or suggestions?

  • Battery won't come out

    I fly every week and swap 2 batteries regularly with my MacBook Pro. Just tried to swap batteries and the battery will not come out! I've tried shaking it loose while holding both release levers open, but it won't budge. I thought of trying to pry it out using a straight edge razor blade but don't want to scratch it or cause damage and besides I would need 3 hands.
    The battery charges OK, but being limited to one battery doesn't work for me as much as I fly and am away from AC.
    I've scheduled a genius appt. at an Apple store, but has anyone else experienced this problem and/or have an easy solution!

    I believe the Genius Bar is your best option for avoiding damage. It is possible that the stuck battery is defective and has leaked, swollen, or both.
    When the Genius gets the battery out, be there while they inspect the battery compartment for signs of damage. If your find the battery has leaked or swollen, have them check for and document any staining or corrosion inside the compartment. You wouldn't want to just get a new battery and find out later that the old one has damaged something that's harder to replace.
    I had the original battery in my MBP start to leak but I discovered before it swelled or anything touched the compartment. Had I waited, the location of the leak could have made the battery hard to extract.

Maybe you are looking for