INK CARTRIDGES IN NEW COUNTRY NOT ABLE TO BE USED
Hello - I bought my old Photosmart C6183 in South Africa about 8 years ago where the ink cartridges are numbered 177. I am now living in Britain and I brought my printer with me - here, you don't get 177 catridges, you have to use cartridges numbered 363. I bought some, but the printer continually tells me these cartridges are not valid for use on this printer. I have read through the forums and done what has been suggested - restart, take out, clean heads, etc, nothing works. I tried phoning HP support, but they will not help me because my printer is old. I know its is old, but it still works and I paid a lot of money for it at the time. The cartridges cost a fortune and its pretty upsetting that I am getting nowhere. I don't understand why I cannot fix this problem - HP is not going to be facing a claim under a warranty from me, I simply wish to use my printer. I find these restrictions put in place by HP pretty ridiculous once a machine is out of warranty. Can anyone help me with this problem?
Hello SJK910,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Similar Messages
-
Will the new watch be able to be used as a fob watch? In the NHS we are not allowed to wear wrist watches so this would a really useful feature.
will there be a mount for the watch that facilitates it being clipped onto a uniform rather than kept in a pocket to get broken or lost? I understand that it might not be able to do some of the more technical things like keep track of my pulse etc. However if it doesn't have the facility to be worn as a fob with a specific mount it's not going to be any use to lots of people. I possibly wasn't very clear in my first question.
-
just transfered M2TS files from PC to new mac, not able to run them in final cut? any ideas?
FCP doesn't like mpeg2 transport streams. You might give ClipWrap a chance to do the conversion. They have a free trial. If it works, the full version is something like $50.
Good luck
x -
Error in Info Package - NOT able to be used as loading variant
Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
NehaHi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain; -
11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit
Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM -
Not able to login using ORACLE USER in Linux
I am not able to login using OS user ORACLE in linux,
I am getting following error when trying to login
/etc/X!!/gdm/PreSession/Default : Registering your session with wtmp and utmp
/etc/X!!/gdm/PreSession/Default :running : /usr/bin/X11/sessreg -a -w /var/log/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1" : 0" "oracle"
/etc/profile: line 17 : syntax error near unexpected token 'then'
/etc/profile: line 17 ' if[ $USER = "oracle" ]; then'
Failed to execute message bus daemon : No such file or directory
EOF in dbus-launch reading address from bus daemon
I tried to edit /etc/profile file but not sucessfull. Please help me out . This installtion is on VM ware
Edited by: user12356407 on Dec 16, 2009 3:21 AMuser8896383 wrote:
I am not successful to login using Oracle User .
I tried to edit /etc/profile file on Line 17 , but of no use.
could you please be more precise about what exactly i should look in or edit in that file.
Thanks for your immediate response.My car doesn't start
I tried to fix it
It still doesn't start.
Can you be more precise in telling how to fix it. -
How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!
Assuming you're using the same Apple ID, just download it onto your iPhone.
-
As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?
Have tried suggestions from here and elsewhere but scrolling not working for me (in Word only!) on magic mouse or trackpad.
MS Word for Mac 2011 (V14.4.6) with Yosemite (V10.10) -
I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help
I think there has been a change in the password requirements for apple ID's. I think it now needs to be eight characters long and have at least one capital letter and one number. Got to appleid.apple.com and then to manage your account and change your password to something that meets the requirements I mentioned and see if that helps
-
InfoPackage is generated; NOT able to be use as variant.
Hi Experts ,
when i am creating process chain itgives me an erro like
InfoPackage ZPAK_4JC3WU0BJTYAY158ED085A45W is generated; NOT able to be used as loading variant
1) Start variant
2) Delete index
3) load info packe
4) create index
when i am activate it gives me above error massage in the 3 rd step .
i tried to include any info package it gives me same error.
Any suggestion realy appriciated
thanks in advance
Regards,
ve.Hi Sudeep,
thanks for u suggestion , but i have tried manually it is loading good. but when i am include those infopackage in process chain it gives me error massage like Infopackage is generated not able to be use as variant.
Even i tried another infopacke and another start variants it gives same error.
any help really appriciated.
BR,
/ve. -
my nightmare started when i upgraded my ipad to ios 7.0.2 i am not able access internet using cellular data, how can i revert to my old ios.wifi is ok , but cellular data is a big prob.can anybody help me ?
Can't downgrade on iOS ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings -
HP Photosmart C6180 all-in-one. Will not print Black. Also shows low black ink on ink level. Cartridge is new and HP brand.
In printing colors, very light and has RED hue as there is no black. Also two other cartridges show low ink when all the cartridges have been replaced.Hi there,
Download and run the print and scan doctor located here (amoung resolving some things automatically it can give us a better idea of what is going on with the printer). Give the steps outlined a shot and let us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Just got new Desktop, reconfiguring everything but not able to get to my contacts from previous setup . Need to get the old page with names and phone Numbers
What exactly is the version of Skype program installed now on your computer? In Skype go to Help -> About Skype.
-
I recently moved from the UK to Spain. I updated my account and set it to the new country, however, when I want to redeem a voucher bought here in Spain, I get the error message that this vouch needs to be redeemed in a Spanish storefront. Does this mean I can only use UK vouchers here in Spain?
You will need to change the store that your account is accosted with from UK to Spain. To do this go to Settings > iTunes & App Stores then tap your Apple ID, tap "View Apple ID", enter in your Apple ID password if requested, then tap "Country/Region", then tap "Change Country or Region and select Spain. If you any credit on your account from UK you will have to make sure your credit reaches zero or contact Apple to cancel your balance.
-
New Installation not able to login Bex and QD and RD
Hi,
I have newly installed Bi7 in my system but am not able to login(through EXCEL) to Bex and report designer and WAD , query designer
But am able go through RRMX T-code..
Please anyone Help me.
Thanks,
Jack.Hi jack,
go through this note 917950 you can solve the problem.
<removed_by_moderator>
Thanks.
Raju.
Edited by: Julius Bussche on Feb 25, 2008 3:56 PM
Maybe you are looking for
-
How to record my voice by headphone on mac mini
Hi all, How to record my voice by headphone on mac mini. The headphone have a microphone. It can record on window 7, but on mac mini, it's not working. I don't know why. Please help me. Thanks.
-
The code below works assuming you have a list template setup called "GenTasksTemplate". The problem is that even though the check box to include content was checked during the creation of the template, the task items in the new list do not get popula
-
Moving a button - should be simple right?
I just can't eliminate the 'jumping' that is happening when I move a button using the mouseDragged event: private void myBtnMouseDragged(java.awt.event.MouseEvent evt) { myBtn.setLocation(evt.getX(),evt.getY()); The above call was added by this: myBt
-
F4 help not showing for currency translation types
Friends, I have a scenario where I need to convert currencies in my query based of different tranlastion types. I maintained a variable in RRC1 and it's working fine when I execute the query. It asks for the variable - shows different available optio
-
Reconnecting media with .mov extentions
Hi everyone, so my problem is this. I am working on a feature with a lot of media and we are trying to set up a duplicate station at the visual effects studio. The media files were brought over on an external hard drive and copied to a PC desktop. Th