Ink level shows warning after refill

Product Name: Deskjet Ink Advantage 1510 All
OS : windows 10
I have refilled my catridge but still my ink level showed low.
I tried after by pulling out the power cable and plugging it back in. and now it is not shwoing any warning in printer but the estimated level in hp tool shows warning. Please help.
Please let me know if in need of more information..
Regards,
Naresh Durai

NareshDurai wrote:
Thank you for your reply BH.. Hope someone will answer me how to reset the chip.
Hi,
You may want to post your question how to reset the chip on other forums, I don't think you can find the info on this forum.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Photosmart Premium c 309g will not print black, all other colors fine. Shows ink levels fine,

Have photosmart premium c309 g connected wirelessly to I Mac and Mac book pro. The unit suddenly will not print black. Ink levels show all good. All other colors print fine. When check HP utility and go to print quality diagnostics, a box appears that states cannot print PQ page--make sure printer is turned on. If I tell it to print a page, it immediatly connects and prints all colors but not black. How can it print regular page but not receive message to print PQ page? "make sure printer is on" ??

I have this exact same problem with the same printer. Printer will not print black. My macbook pro is connecting to the printer but shoots out a blank page. I just put in a new ink cartridge even though it was not low on ink. Please help.

Color Print Cartridge level shows empty but Cartridge is full

I had the color cartridge 75XL for my J5780 refilled.
I get an error message that the color cartridge needs to be replaced and the ink level shows ZERO, but the cartridge is full

The message indicates an electrical issue with the cartridge, this is different than the cartridge being empty. Cleaning the cartridge contacts as shown here may resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8500 A909g new ink levels drop to less than half after few pages.

Installed all new HP940 ink cartridges and the levels dropped to half after only printing less 12 ink defective pages. Quality Diagnostics Page shows colors but black ink does not show up at all. Self Test Diagnostic page shows printhead status is good. Checked the ink tubes and they are still neatly bundled and no signs of leakage.

Hello TV60,
I see that the Officjet 8500 a909g is not displaying the correct ink levels and will not print black. You have done a great job trying to resolve the issue already, some steps I will suggest you have already done but it wont hurt to go over them again.
This HP link: Ink Usage in Inkjet Printers may help explain why the inks are not showing as full as you think they should be after just installing them.
These HP documents: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages & Troubleshooting Print Quality Issues are going to help you figure out if the print heads need to be replaced even though your Printer Status Report shows the health as "Good".
I hope this helps.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Empty Ink Level Displayed After Installing New HP Cartridge on HP D7260

Hi there,
I have an HP Photosmart D7260 printer. I have alway used genuine HP ink cartridges. I recently replaced the Cyan cartridge after it ran out of ink however the printer is still showing the cartridge as empty. I printed the Self test Diagnostic Page and the ink level is shown at 0%. The ink expiry date is shown as "04/01/2016" indicating that the cartridge is new.
I've tried reseting the printer and reinstalling the cartridge several times. How can I get the printer to show the correct level for the new full cartridge? I don't want to buy a new cartridge since this a brand new genuine HP cartridge. I'm quite sure there is a way to reset the incorrect ink level so please advise.
Serial Number: [edited]
Firmware Version: RExxFN0721BR
Please help!
John

I have the exact same problem with a Photosmart 3210 printer. My brand new light magenta cartridge is not showing up as full and I can't print even black & white! This is ridiculous. I hope someone at HP replies to your posting with a solution soon!

Photosmart Prem-Web C309n-s. No warning for low ink levels.

Printer runs out of ink with no warning, and there is no way to verify the ink levels to monitor remaining level. :-(

The ink levels can be checked from the printer front panel or computer as described here.
If the cartridges appear to run out of ink prematurely check the vents as descried in step 3, solution 6 here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 6600 low ink level warning

I have a HP 6600 and I want to turn off the ink cartridges depleted warning that pops up repeatedly on my laptop. Does anyone know where to shut off that message?

Hi @Mondo1, I'd be happy to help1
You can try changing the settings in the Printer Server Properties.
Click to highlight your printer, click Printer Server Properties, then click Advanced tab and check both "Show informational notifications..." boxes. Click Apply and then click OK.
As you can see, this screenshot is not specific to your printer. you will need to look for your 6600.
Screenshots Source
Please let me know if this does the trick. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Low Ink level warning on new inks.

I own a Photosmart c309a and I am about ready to throw the thing out of the window.
I purchased all 5 inks required today, printed 1 test photo (6x4), 2 personal photos (6x4) and about 7 test pages as I have not used the printer for a couple of months and had to clean the printer head 7 times.
The problem I am now faced with is low ink levels. The Cyan, Magenta and Yellow inks are nearly empty, the Black is just over half full and the photo black is about a quarter full.
Remember, these official HP cartridges are brand new and purchased TODAY!
As my warranty expired with Comet about 2 months ago and HP is of no help at all as the automatic HP warranty check is a dead end, I am at a loss as to what t o do next, other than dumping the whole lot in the bin and buying a new (non HP) printer. Can anyone help?

Hi @Mondo1, I'd be happy to help1
You can try changing the settings in the Printer Server Properties.
Click to highlight your printer, click Printer Server Properties, then click Advanced tab and check both "Show informational notifications..." boxes. Click Apply and then click OK.
As you can see, this screenshot is not specific to your printer. you will need to look for your 6600.
Screenshots Source
Please let me know if this does the trick. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp 8600 software no longer shows ink level.

Recently the 8600 software on windows 7 showed the ink levels of the printer. This function is no longer availalbe. Also, there is no tab tht shows this. Can it be retrieved.
This question was solved.
View Solution.

If your printer is connected by wired or wireless LAN you can enter the IP address of the printer (found from the front panel by touching the wireless icoon or by printing a network configuration page) in your browser. This will bring up the printer's embedded web server, which provides various information including ink levels. You can also get the ink levels from the front panel by touching the ink droplets icon on the front panel.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

No ink level remaining showing up

My officejet 7000 no longer shows me ink level remaining. Do I need to re-install my printer or software?

Hi
Thanks for your reply.
Please go to your control panel--> programs--> programs and features--> uninstall program--> select the printer driver.
Control Panel\Programs\Programs and Features
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Regards,
- I work for HP
Ceejay_2012

Photosmart D5460 all ink levels permantly shows empty

Photosmart D54600 ink indicaters permantly show empty. and shows-ink installaion date 18 02 2009
This question was solved.
View Solution.

Hi @Gibezzi,
I'd like to help as best I can with your Photosmart D5460
Where is it you're checking the ink levels?
What operating system is on your computer?
Are you still able to print or is it giving an error related to the ink?
Once I have this information I can look further into things for you!
In support of Movember
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My officejet 7000 stopped showing ink level remaining

do i need to re-install my officejet 7000 as it no longer shows ink levels remaining.

Hi, this could be due to the lost of bi directional communication between your device and the printer. Follow the link below to try to re establish this connection.
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01868684
If my answer was helpful please click on the "Thumbs up" button on the left to say "Thanks".
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Safari yosemite java warning keeps showing even after install

I can't get rid of the Java warning after upgrading to Yosemite OS on my Mac AIR.
I have already installed Java and i can verify it online (java.com).
I already have Java.
What can i do. I HATE the **** warning. Keeps poping up random.

Reinstall SE 6 http://support.apple.com/kb/DL1572 and see if that fixes the problem.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Ink level no longer displays

My C4280 (I have Vista) has stopped automatically showing ink levels when printing (the cartridges are HP , not refilled or remanufactured). Can anyone tell me how this can be restored?
Meanwhile I’ve tried “Method One (using HP Solution Centre)” but at the window’s top right it says “Ink levels not currently available”, and in Toolbox it says: “The computer is unable to establish two-way communication with the device.”
With “Method Two” am not quite sure what is meant by “the software program”, but in Windows just General, Security and Details. Going straight to Print doesn’t offer any Properties.Photo Gallery, for example, clicking File doesn’t offer a Print option in the dropdown, and on clicking Properties there is no Services tab.

Sometimes in thr rush to download the software you forget the other (sibling) programs.
The Utility patch fixes:
known problems with the following features and functionality: HP Print Status
Toolbox
Ink Levels
Solution Center
HP Scan (All-in-One)
Front panel scan button (All-in-One)
mwatts:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77751-1&lc=en&dlc=en&cc=us&...=
dunno:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77751-1&lc=en&dlc=en&cc=us&...=
Alas, Hp does not offer these utiliies for the HP6122 with HP990C drivers.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Epson Photo r200 - won't add, doesn't show up after software install

I can't get an Epson R200 photo printer to work with the IMAC running OSX10
I have used the included cd to install the drivers, as described in the manual.
I have downloaded new drivers from EPSON.com and installed them.
I have downloaded all OS updates.
I have contacted EPSON and perfromed their run around (of telling me to delete the files, download new ones, and reinstall it).
After I install it, the pritner does not show up. So i go to the printer thing and click "Add". When I do this nothign comes up. It should come up with a dialogue box of sorts if I'm not mistaken?
If I search my way through the files to the Epson utility it installed, I can see the ink levels in the printer, and perform cleaning functions from it. I thought it was wierd that would see it, but the OS wouldn't.
Any ideas?

I can't get an Epson R200 photo printer to work with
the IMAC running OSX10
I have used the included cd to install the drivers,
as described in the manual.
I have downloaded new drivers from EPSON.com and
installed them.
I have downloaded all OS updates.
I have contacted EPSON and perfromed their run around
(of telling me to delete the files, download new
ones, and reinstall it).
After I install it, the pritner does not show up. So
i go to the printer thing and click "Add". When I do
this nothign comes up. It should come up with a
dialogue box of sorts if I'm not mistaken?
If I search my way through the files to the Epson
utility it installed, I can see the ink levels in the
printer, and perform cleaning functions from it. I
thought it was wierd that would see it, but the OS
wouldn't.
Any ideas?
I can't get an Epson R200 photo printer to work with
the IMAC running OSX10
I have used the included cd to install the drivers,
as described in the manual.
I have downloaded new drivers from EPSON.com and
installed them.
I have downloaded all OS updates.
I have contacted EPSON and perfromed their run around
(of telling me to delete the files, download new
ones, and reinstall it).
After I install it, the pritner does not show up. So
i go to the printer thing and click "Add". When I do
this nothign comes up. It should come up with a
dialogue box of sorts if I'm not mistaken?
If I search my way through the files to the Epson
utility it installed, I can see the ink levels in the
printer, and perform cleaning functions from it. I
thought it was wierd that would see it, but the OS
wouldn't.
Any ideas?
Hi, I use two epson printers on my IMac and they installed with not problems. I know you have tried this but the only thing that comes to my feeble mind is that when you go to the Printer Setup Utility and click on "add" a windo comes up that allows one to select the type of connection you are using for the printer. In my case it is EPSON USB there are other options and maybe it is not selected to match whatever connection you are using with your printer. Good luck, rj

Ink level shows warning after refill

Similar Messages

Maybe you are looking for