Ink light flashes and it just won't print Deskjet 5150

Hi all,
I have a deskjet 5150 and just had the printer cartriges refilled at a local shop here in my area. Since I have done that and before I did that, I have had problems printing. Sometimes it would help if I disconnected the usb cable and plugged it back in. Then the document would print. Lately, all that I get is a blinking ink light on the printer. Everytime I try to print, the computer just tells me that there has been a problem with printing. 
Any ideas?

Which light is blinking?  Are there any error messages on the computer?  Try printing with just a color cartridge installed, then with just a black cartridge.  The one that does not work is the problem cartridge, try removing it and cleaning the cartridge contacts as shown here.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Deskjet 1050 ink light flashes cannot find a problem

    Every so often for no apparent reason ink lights flash and printer stops printing. In the past I have solved this problem by turning printer off and leaving untill it decides to operate. This time it is not working.
    DESKJET 1050 ALL-IN-ONE J410 SERIES

    The Blinking Lights document, describes conditions causing the error states, and may provide some help for you:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02061335&tmp_task=solveCategory&cc=us&dlc=en&la...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • My ipod shuffle 1st generation won't restore. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?

    So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?

    reset utility should help...for mac
    http://www.apple.com/support/downloads/ipodresetutility103formac.html
    for windows
    http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

  • Light flashes and won't start up

    the light flashes and Apple TV does not start up

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source List
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • F2280 Both Ink lights flash with cartridge in or not!

    Hi there,
    The printer is claiming an Ink failure Error (E is showing and both ink lights flashing)
    I tried cleaning the contacts. Tried turning off with power cable out.
    Tried removing catridge and plugging in and the 2 lights still flash showing E!
    Please help
    Thank you

    Hi there Jane
    There's a link below with troubleshooting steps for blinking lights on DJ F2280 that might be worth checking out.....
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01430567
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • Messages and FaceTime just won't activate on my iPad Air all of a sudden; tried a LOT of solutions

    About two weeks ago, my iPad Air was spontaneously signed out of Messages and FaceTime when I was using it to browse the web while on the bus, connected via Personal Hotspot on my iPhone. Since then, I haven’t been able to sign in to either Messages or FaceTime. I can still sign in to my iCloud account as normal for other things like contact and bookmark syncing. It’s just Messages and FaceTime that refuse to activate.
    The error messages I receive vary between the following:
    “An error occurred during activation. Try again."
    “Could not sign in. Please check your network connection and try again."
    “Verification failed - The connection to iCloud timed out."
    “Unable to contact the iMessage server. Try again."
    This iPad Air is a replacement from Apple (quite possibly a refurbished one) that I received in November 2014, after the previous model developed a malfunctioning touchscreen in one corner. It’s worth mentioning that my iPhone and Mac are completely unaffected by any issues, and can also be signed in and out of Messages and FaceTime without a hitch.
    I’ve tried an awful lot of things in an attempt to get Messages and FaceTime to sign in successfully on the iPad Air, none of which have worked, and many of which I have tried multiple times.[1]
    Things I have tried in an attempt to activate Messages and FaceTime
    connecting to different wifi in multiple locations (work and home) and Personal Hotspot from iPhone
    signing into Messages and FaceTime with different Apple IDs (these won’t activate Messages and FaceTime either)
    wiping iPad with normal restore
    wiping iPad with DFU restore
    resetting network settings (both after fresh install and after backup restore)
    restoring from an October 2014 backup (still have to sign into Messages and FaceTime, still don’t work)
    turning off the automatic timezone setting and setting the date and time manually, even though it was correct anyway
    deselecting phone number and @me.com so purely using @icloud.com to sign in
    running the activation process through VPN connections via London and New York
    changing DNS on wifi to 8.8.8.8
    updating to iOS 8.2 beta 4
    I would love to hear from anybody who can provide the solution as to why Messages and FaceTime just won’t activate. Apple won't provide free support on this as the iPad is now out of warranty.
    “The definition of insanity is doing the same thing over and over and expecting different results.” - not Albert Einstein, but a good quote all the same ↩

    Same problem in 8.1.3
    Apple help!

  • Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

    trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
    This question was solved.
    View Solution.

    You can try removing and reseating the memory and see if that works.
    If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

  • How can I clear the browser pull down list, I have followed directions using options and it just won`t clear

    How can I clear the browser pull down list, I have followed directions using options and it just won`t clear

    Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
    You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
    This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.<br />
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]

  • HP Officejet Pro 8100 Everything fine; Just won't print

    HP  Officejet Pro 8100 working on a Windows 8 PC
    I like this printer, had it for a few months, worked fine at the start. For more than a week now, it just won't print. Troubleshooting reveals no problems with set-up or anyhing. No error messages. Files go to the printer, listed on the queu, but nothing happens thereafter. Help!

    This solution was created to address the issue you've described. 
    Print jobs stuck in queue / No response
    I am an HP employee.

  • TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

    I'm having a difficult time getting my wireless keyboard &amp; trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

    Hello:
    Try resetting the SMC:
    http://support.apple.com/kb/HT3964
    Barry

  • Won't start up, makes weird beep, power light flashes, and fan revs

    I just tried to install new ram, but now it won't start up. I put the configuration back to what it was, but still not starting up. It makes a different beep then the fan gets really load, and the blue light flashes slowly...
    ahhhh... did I break it?

    Hi don rumsfeld-
    Greetings and welcome to the Apple boards
    Flashes described here: About the Power Mac G5 (Late 2005) diagnostic LEDs
    My guess is that the RAM was either not installed properly or not seated firmly. This may be helpful: Memory (DIMMs)
    Replacement Instructions
    Luck-
    -DP

  • HP desktop won't start, red light flashing and beeping, loud fan

    Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
    It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
    Any help? Thanks.

    Hi
    I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • I save and closed my Keynote presentation and it just won't open. Message : Can't open document «Not a valid ketnote document»

    I just finished a keynote presentation and saved and closed it. Now it just won't open. Message : Can't open document «Not a valid keynote document»
    I recreated a new one. And it does the same. Impossible to reopen any of my keynote presentations.
    What can I do!!! My presentationis tomorrow morning!!!
    Keynote '09 version 5.0.5 with MAC OS 10.6.7

    Have the same issue. Use the same version and OS. I get sometimes the message 'Could not save the document. No such file or directory. What happens is that the file is corrupted and not usable anymore.... Sorry i can not help, but this is a serious error and we get crazy here since we have several stations with the same problem....
    Come on Apple... help!

Maybe you are looking for

  • Syntax Error while activating 2LIS_04_P_ARBPL Transformation

    Dear all, While activating  2LIS_04_P_ARBPL Transformation activation , I am facing following  error while checking in Routine E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statem

  • My iPod classic is saying "do not disconnect" but neither my MacBook Pro or iTunes is recognizing that it is plugged in.  What can I do?

    About 2 weeks ago my iPod told me that something (I forget what now) was corrupt and my iPod had to be restored to factory settings, so I did that.  Before I had a chance to resync my iPod, my harddrive in my MacBook Pro crashed and had to be replace

  • Lela will not install. Please Help.

    I am having a problem installing the linksys easy link advisor software on my pc. I have tried installing from the disc that came with my router and have also tried to install from the install pack I downloaded but both times i get the same message:

  • 2LIS_02_SCL-BANFN,BNFPO

    Hi, the 2 fields I mentioned are in ROOSOURCE with selection 'P'.  I changed the selection to 'X' with the code. update roosfield set selection = 'X' where oltpsource = '2LIS_02_SCL' and   field      = 'BNFPO' and   objvers    = 'D'. When I executed,

  • How to Prevent Pacman from asking Confirmation (Y/n) questions?

    I want to put a couple pacman install commands in a ".sh" file and want it to download and install on itself. I know I can do it by: pacman -S <package1> <package2> But thats not what I want. I want pacman to entirely bypass the "Proceed to install?"