Ink system failure printhead unrecognized

I keep getting ink system failure errors and printhead is missing or unrecognized. I have turned off and restarted the printer and unplugged and replugged the printer.  I ran the diagnostics. At first it said there was a printhead problem but now it says everything is OK but it will not print a test page. There was no decline in print quality before it failed. It stopped printing suddenly after printing several jobs perfectly.  I was about to buy a new printer when it printed something from a different computer on my network (a MAC), so the printhead and cartridges are actually working fine. Why is there a communication problem from my usual computer? What can I check now?

Hello @Sari44 ,
Welcome to the HP forums.
I understand that your Officejet 6700 has an ink system failure message on it.
I would like to help.
It is odd that you could get a print job from your Mac.
Try going through the following document.
An 'Ink System Failure' Error Message Displays on the Printer or on the Computer
Please let me know how things work out.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • "HP AIO Printer 7180 " Ink System Failure- Worth Repair ?

    Hi              I have the above all in one printer. it is maybe 8 years old now but an excellent,top of the line printer at that time. I have gotten an " ink system failure" warning and nothing works. I have been told that this means the printer is basically shot-to chuck it-and buy a new one. Its such a nice unit, it seems a shame to not try a repair. my local printer repair shop in Vancouver -eltek- has quoted me about $50 to check it out and up to repair from there. I've heard that this is a common problem with this unit. Question- As I am Disabled , on fixed low income,  can I attempt a self repair and if so , what can I attempt? Would it be worthwhile to pay for this problem repair or should I just write it off and save $100 for the newer type, disposable printers ?                                                                                                              Thanks Most Kindly   Brian Smith in North Vanc 

    Hey ,  Welcome to the HP Support Forum.  I understand your Photosmart C7180 All-in-One Printer is stuck in an error state.  I would like to assist you with this.   According to this article from HP, the sole troubleshooting recommendation is performing a hard reset.  Beyond that, I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods.  Even though your printer's out of warranty, you might be able to look into alternative servicing or replacement options with HP.   Addressing your questions about D.I.Y. repair and third-party servicing, I do have some advice that you may want to take into consideration.  The printhead on your C7180 is fixed/permanent.  This means you can't readily take it out and clean it or replace it like you can in other printer models.  Is it possible to dismantle the entire unit and identify the source of the error status (likely the printhead) and repair it on your own?  Maybe... but there are no official guides from HP that support this approach.  With some research online (Google, cough, YouTube, cough ) you might be able to find tips on how to go about this, but we rarely advise this route as it can exacerbate existing issues or create new problems.   Third-party repair businesses may have their own methods for fixing these types of printer errors, but I'm doubtful that they can guarantee a positive outcome, especially with this type of error.  You can end up wasting  money on a fruitless repair.  We don't do pre-sales tips in the Forums, otherwise I'd recommend budget-friendly printers from HP that would match and in many cases exceed the capabilities of your C1780.  If you do end of deciding to pick up a new printer you can checkout new HP models here.   I hope this helps.  Have a great day! 

  • C5180 Ink System Failure hp 0xc19a0024

    Hello Everybody,
    Recently I moved from one city to another. After one week of that I run my HP C5180 printer. Unfortunately I have until today an error: "Ink system has failed. Refer to printer documentation. Error: 0xc19a0024. Turn power off then on again."
    Of course I didn’t find any information in my documentation. Also turn off and on didn't help.
    After reset this error (using Manufacturing Key Combo) I can “Print Report” but page is empty.
    Full reset to the manufacturing settings don’t help. After “Tools/Clean Printhead” or “Tools/Align Printer”... ERORR 0xc19a0024 appear again.
    I called to the HP support, but the printer is out support and I didn’t get answer what this error mean.
    I will very gratefully if somebody explain me what the error 0xc19a0024 exactly mean. Any solutions of my problem are also very welcome.
    Thank you!

    Hi andy_b23,
    Sorry that did not help, the 0xc19a0024 is an Ink System Failure message. If the guide did not resolve your issue, then the next best option is to please call our phone support at 800-474-6836 for your upgrade/replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Best of luck!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet 6500 ink system failure - hp printers used to be good, but are trash now

    I'm so frustrated. I have an Officejet 6500 that gave me an Ink System Failure warning. I read that it probably was a low cartridge and so I replaced the low one - according to the level indicator, it still had ink - and it started working again. Then I got the error again. According to the HP print manager software, all cartridges had ink, but now the magenta looked low, so I replaced it. (As a side note, this printer EATS the expensive high capacity cartridges. I thought it was a good value to buy the higher capacity cartridge, but if I get a dozen pages out of them I'm lucky.)
    So now I have tried cleaning the printhead using the manager software, which doesn't work because the printer is still in Ink system failure mode. So I took out all the cartridges, cleaned the printhead - it was inky - cleaned the contacts, reset using the turn on, unplug power cord from printer, from wall, wait 15 seconds, plug in to wall, plug in to printer. Still have the error. Did it all again. Still have the error.
    I'm so irritated. I spent good money on this printer, and the expensive HP ink, because I'd had good luck in the past with HP printers. But this one h as eaten up  hours and hours of my time and cost me hundreds of dollars in ink alone and STILL  WON'T PRINT. Is there some other secret reset method that isn't documented? Some other test I can do? According to the troubleshooting guide, I"m now supposed to replace the printhead, and then if that doesn't work send the printer for servicing. Hello? You told me to replace the ink cartridge, so I wasted expensive ink doing that. Now I'm supposed to replace another part, without any real idea whether it will fix the problem or not? There's no diagnostics on this printer that can figure out exactly what part of the ink system has failed?
    If anyone has any ideas how to get this piece of junk to print I'd really appreciate it. I'd love to be able to keep this printer working for a little while longer because I'm trying to get a business off the ground and just don't have lots of unused money sitting around to throw at solutions that "might" fix my problem. I've become so disullusioned with HP. They used to make great products, but now unfortunately the products and the support seem to have gone down the tubes together. I will NEVER buy another HP printer even if they fix the quality issues.

    Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok. 
    Go to this link and HP shows you how.
    support.hp.com/us-en/document/c01643079
    Lucky for me it worked!

  • Black Ink won't print & "Ink System Failure"

    I have a 3 year old HP Photosmart Plus e-ALL-IN-ONE B210, Product # CN217A.  I was doing a lot of printing yesterday, noticing that I was getting low on Black ink.  Then I got a very light page and changed the black ink cartridge.  I installed it and....nothing!  I cleaned the print heads...nothing.  Thinking I had a bad cartridge, I went to the store and exchanged it.  Again, nothing.  So following direction's on HP's website, I removed the print head and gently wiped it off.  I placed it back, following directions, reinserted the ink cartridges and now I get the "Ink System Failure."  I also cannot align the print cartridges, either.  Any help would be greatly appreciated.

    As it's 3yrs old, it's likely out of warranty (typically warranty is a year from purchase date). It might be worth soaking the printhead as described by @Bob_Headrick below....
    1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
    2) Next remove all the ink cartridges, then remove the printhead assembly.
    3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
    4) Remove the printhead and gently dry the electrical contacts.
    5) Put the printhead back in the printer and then reinstall the ink cartridges.
    Please let us know if this works
    Thanks
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Officejet Pro 8600 Plus ink system failure

    I suddenly started having error messages staing there is an ink system failure.  Sometimes it changes to a "missing or failed printhead"  This happened just after the printer downloaded an update which I assume was new firmware.  I found a troubleshooting guide on the support site and tried it, but have not resolved the problem.  It is late so I plan to try again tomorrow, but wondered if others had this problem after a download.

    I have the same problem on my officejet pro 8500 a909g. I get thee message, renew the magenta cartridge! I did that, but stille get the same message and I cant print at all. I am afrais that HP has pre programmed the printer to go down after some working hours or a given amount of outprint. I do not know where to get assistance to solve the problem, but will let you know if it succeed. I am from Denmark. Best regardsSteen

  • All-on-One printer ink system failure with unusual error code

    Woe is me (and my kids)!   Got the 'printhead problem' message while using my C6380 printer.  Followed all instructions - cleaned the printhead, replaced the cartridges with new HP products, reset the printer - but persistently getting the 'ink system failure' message.  The error code is Oxc19a0007 which is NOT one of the many listed error codes -  ...0006 and ...0008 are on the list but not ...0007.
    Any ideas, anyone?
    BW
    DPCT

    Hello DPCT,
    Welcome to the HP Forums!
    I understand your Photosmart C6380 is stating "Ink System Failure". I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector.
    Please follow this HP document on 'Ink System Failure' or a '0x...' or a 'C2...' Error Message Displays on the Front Panel. If you're still experiencing the same problem, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • Ink System Failure comes up with 0xc18a0006

    i have not used the printer for 2 years and have secured some new print cartridges  code 177 from the country of printer purchase. Upon installing 5 new color and 1 Black cartridge, the Ink system failure comes up with refer to printer documentation.Cant seem to fix thisPoppa G

    Hi , Welcome to the HP Support Forums! I see you have recently installed cartridges in your HP Photosmart C7283 which you had not used in 2 years. You get an 'Ink system failure' error message. I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays If you are still getting the error message, you may need to replace the printhead, depending on how your stored the printer the printhead may have dried up. Take a look here: Storing Opened Cartridges and Printheads If you do need to replace the printhead, refer to the same document to store the cartridges that you have opened. I will leave you with our technical support contact so you can see all options available to you. They can be replaced at www.hp.com/contacthp/. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  • Ink system failure error message

    Error message Ink system failure Oxc19a0022
    Or that the printhead is missing or not installed properly.
    For the last hour and some I have been dealing with repeatedly
    having to turn the printer off and on again to no avail.
    What's the definition of insanity? something about doing the same thing
    over and over again and expecting a different result? yes, I'm reaching
    that point.
    I have: turned the printer off and on repeatedly. I have recirced it
    (unplug, wait, replug, turn on, repeat/repeat...)
    I have removed all of the ink cartridges, I have removed the printhead...
    None of these are ameliorating the problem. The printer was working fine
    until I replaced a cartridge. This ALWAYS happens when I install
    fresh ink. But after 20 times of turning it off/on again it usually kicks in and
    decides to print.
    Not this time. It is not budging. VERY FRUSTRATING!!!! I can't even get it to clean
    the printhead for this roadblock. 
    Please...help? Thank you...
    This little printer is otherwise a workhorse for me. 

    Hi @LC60 
    I am happy to hear this printer has been such a work horse for you, but I am afraid to say, this may be the end of the road for this little horse.
    You can try the steps in the following document (most of which I think you have probably done), but if the issue persists, it may be time to consider a newer model; 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
    Thanks for reaching out to the HP Forums. If it comes to a point that you decide on a newer model, you could call us. We may be able to offer you a discount on a newer printer    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • No mater what I do it keeps telling me ink system failure

    No mater what I do it keeps telling me ink system failure on a officejet 6500 wireless

    Hi,
    You might have a broken printhead, cal your local HP for how to get a new one.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • "ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

    "ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g  - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
    This question was solved.
    View Solution.

    Have you tried the steps outlined in this article:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    If not give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hp photosmart wireless e-all-in-o​ne b 110 series printer on main screen says ink system failure

      hp photosmart wireless e-all-in-one b 110 series printer on main screen says ink system failure

    Hi,
    In order to troubleshoot the problem. please follow the steps listed under '0xc19a0013' or no code displays with the 'Ink System Failure' error message below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458034&cc=us&dlc=en&lc=en&product=4022343&tmp​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have a 6500 officejet printer that says ink system failure what can i do to fix this if anything??

    my printer 6500 office jet says ink system failure help??

    I am having the same problem, but there is not error code associated with the message.  It says: "Ink System Failure.  Please turn Printer off and then on."  No additional codes or instructrions. 
    I have tried to clean the heads without any luck. 

  • C7280 All in One - Ink System Failure

    Hello,
    Please, please can you pm me to state how to reset the above C7280 error message 0xc18a0406 ? I reset it 2 weeks ago from a link that I found on the forum using the # and star symbols etc. It worked thereafter, but today it has stated the same error mesage again  I now can't find the previous link. I promise I will write down the reset code this time . Thank you SO much in anticipation.

    Hi Cynthiah,
    I see by your post you would like the reset for the printer.
    I can help you with this issue.
    Here is a document for the 'Ink System Failure' or a '0x...' or a 'C2...' Error Message Displays on the Front Panel.
    I can send you a private message with this information.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for