Inky watercolor texture: how to make the brush?
Hi all!
I'd like to make a brush with a texture similar to the one seen in this and similar posters: http://www.southshoreart.com/poster/classics/moonlight.html.
I've been working with Photoshop for years, but not much with brushes or any kind of painting. I'm going to be painting over a photograph of a pond and hopefully achieving an effect similar to this. Can anyone give me any pointers for starting out?
Thanks!
Alec
Given the fact that the original was done in 1927 there's no "effect" as such, just a skilled artist's hand at applying paint with traditional tools.
But, you can get a decent approximation of the effect by Googling for:
photoshop tutorial watercolor effect
You'll find tons of them, and by reading through them, and looking at examples you should find something close to what you're after.
After running through the tutorial(s) of your choice, you might want to customize settings used in the example and add some hand touches.
Similar Messages
-
i think i must be doing something wrong..not saving them properly or something??..its a pain in the --- having to reload everytime
Photoshop writes the preferences file upon exit. If you shut down your computer without properly quitting photoshop there's a chance the preferences will not be properly saved and you will be back to defaults. Always close photoshop, then shut down your computer.
-
Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool. -
How do I make the Brush Tool remember settings for each new stroke?
Using
Windows 7 x64
Illustrator CC 2014
I'm finally attempting to draw directly in Illustrator and already want to shoot myself.
How do I make the Brush Tool remember stroke size and profile?
I need each stroke to be tapered at both ends and be a certain stroke size.
But each stroke I make, I have to edit that one path to be correct.
What gives?Got some results today so I'll share.
Thanks again for reminding me about the 'basic appearance setting'. -
Can someone tell me how to make the letters that look like fabric?
Can someone tell me how to make the letters that look like fabric?
pharrout wrote:
Can someone tell me how to make the letters that look like fabric?
It could be as simple as clipping an image of the fabric of your choice, to a text layer.
In this example the Hessian texture was downloaded from Google images, and placed over a Type layer. You then Alt (Opt) click the intersection of the Type and Hessian layer to clip them together. This just means that only the shape of the underlying layer will show in the clipped layer. -
I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.
Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John. -
I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
The addons '''REMAINED''' including:
* addons I already used in Fx 3.6 (like webmail notifie , xmarks)
* ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
The addons '''DISAPPEARED''' including:
* addons I already used in Fx 3.6 (like yoono)
* '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
Some more details:
* This happened when i use RC for already a few days and keep on even i restart Fx and windows.
* The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
* This addons are really '''disappeared''' but not disable only!
* This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
* I try to install back one of the addons - Stylish, the installed code are still here.
* It is nearly an impossible mission to install every missing addons again, as it really kill my time.Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check. -
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
Hello everybody. I am a web designer (NOT a developer)
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
Now I need to link the 'submit button' so that it will e-mail me the completed form.
(formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
(after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
-Brenna
The e-mail I would like the form sent to is:
[email protected]
Here is the the code for my form 'as is' :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Create a Profile</title>
<link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
<script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
</head>
<body id="main_body" >
<img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
<div id="form_container">
<h1><a>Create a Profile</a></h1>
<form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
<div class="form_description">
<h2 align="center">Create a Tommy Lemonade Profile</h2>
<p></p>
</div>
<ul >
<li id="li_1" >
<label class="description" for="element_1">Name </label>
<span>
<input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
<label>First</label>
</span>
<span>
<input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
<label>Last</label>
</span>
</li> <li id="li_23" >
<label class="description" for="element_23">Service Provider Type </label>
<span>
<input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_1">Barber</label>
<input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_2">Hairstylist</label>
<input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_3">Nail Technician</label>
<input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_4">Massage Therapist</label>
<input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_5">Skin Care</label>
<input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_6">Esthetician</label>
<input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_7">Make Up Artist</label>
</span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
</li> <li id="li_19" >
<label class="description" for="element_19">Top 5 services </label>
<div>
<textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
</li> <li id="li_20" >
<label class="description" for="element_20">List all services you offer & thier starting price </label>
<div>
<textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
</small></p>
</li> <li id="li_12" >
<label class="description" for="element_12">Personal Phone </label>
<span>
<input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_1">(###)</label>
</span>
<span>
<input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_12_2">###</label>
</span>
<span>
<input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_12_3">####</label>
</span>
<p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
</li> <li id="li_21" >
<label class="description" for="element_21">E-mail (Required) </label>
<div>
<input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
</li> <li id="li_6" >
<label class="description" for="element_6">Confirm your e-mail (Required) </label>
<div>
<input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
</div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
</li> <li id="li_3" >
<label class="description" for="element_3">Web Site </label>
<div>
<input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
</div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
</li> <li id="li_4" >
<label class="description" for="element_4">Place of employment </label>
<div>
<input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
</div>
</li> <li id="li_2" >
<label class="description" for="element_2">Work Address </label>
<div>
<input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
<label for="element_2_1">Street Address</label>
</div>
<div>
<input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
<label for="element_2_2">Address Line 2</label>
</div>
<div class="left">
<input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
<label for="element_2_3">City</label>
</div>
<div class="right">
<input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
<label for="element_2_4">State / Province / Region</label>
</div>
<div class="left">
<input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
<label for="element_2_5">Postal / Zip Code</label>
</div>
<div class="right">
<select class="element select medium" id="element_2_6" name="element_2_6">
<option value="" selected="selected"></option>
<option value="Afghanistan" >Afghanistan</option>
<option value="Albania" >Albania</option>
<option value="Algeria" >Algeria</option>
<option value="Andorra" >Andorra</option>
<option value="Antigua and Barbuda" >Antigua and Barbuda</option>
<option value="Argentina" >Argentina</option>
<option value="Armenia" >Armenia</option>
<option value="Australia" >Australia</option>
<option value="Austria" >Austria</option>
<option value="Azerbaijan" >Azerbaijan</option>
<option value="Bahamas" >Bahamas</option>
<option value="Bahrain" >Bahrain</option>
<option value="Bangladesh" >Bangladesh</option>
<option value="Barbados" >Barbados</option>
<option value="Belarus" >Belarus</option>
<option value="Belgium" >Belgium</option>
<option value="Belize" >Belize</option>
<option value="Benin" >Benin</option>
<option value="Bhutan" >Bhutan</option>
<option value="Bolivia" >Bolivia</option>
<option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
<option value="Botswana" >Botswana</option>
<option value="Brazil" >Brazil</option>
<option value="Brunei" >Brunei</option>
<option value="Bulgaria" >Bulgaria</option>
<option value="Burkina Faso" >Burkina Faso</option>
<option value="Burundi" >Burundi</option>
<option value="Cambodia" >Cambodia</option>
<option value="Cameroon" >Cameroon</option>
<option value="Canada" >Canada</option>
<option value="Cape Verde" >Cape Verde</option>
<option value="Central African Republic" >Central African Republic</option>
<option value="Chad" >Chad</option>
<option value="Chile" >Chile</option>
<option value="China" >China</option>
<option value="Colombia" >Colombia</option>
<option value="Comoros" >Comoros</option>
<option value="Congo" >Congo</option>
<option value="Costa Rica" >Costa Rica</option>
<option value="Côte d'Ivoire" >Côte d'Ivoire</option>
<option value="Croatia" >Croatia</option>
<option value="Cuba" >Cuba</option>
<option value="Cyprus" >Cyprus</option>
<option value="Czech Republic" >Czech Republic</option>
<option value="Denmark" >Denmark</option>
<option value="Djibouti" >Djibouti</option>
<option value="Dominica" >Dominica</option>
<option value="Dominican Republic" >Dominican Republic</option>
<option value="East Timor" >East Timor</option>
<option value="Ecuador" >Ecuador</option>
<option value="Egypt" >Egypt</option>
<option value="El Salvador" >El Salvador</option>
<option value="Equatorial Guinea" >Equatorial Guinea</option>
<option value="Eritrea" >Eritrea</option>
<option value="Estonia" >Estonia</option>
<option value="Ethiopia" >Ethiopia</option>
<option value="Fiji" >Fiji</option>
<option value="Finland" >Finland</option>
<option value="France" >France</option>
<option value="Gabon" >Gabon</option>
<option value="Gambia" >Gambia</option>
<option value="Georgia" >Georgia</option>
<option value="Germany" >Germany</option>
<option value="Ghana" >Ghana</option>
<option value="Greece" >Greece</option>
<option value="Grenada" >Grenada</option>
<option value="Guatemala" >Guatemala</option>
<option value="Guinea" >Guinea</option>
<option value="Guinea-Bissau" >Guinea-Bissau</option>
<option value="Guyana" >Guyana</option>
<option value="Haiti" >Haiti</option>
<option value="Honduras" >Honduras</option>
<option value="Hong Kong" >Hong Kong</option>
<option value="Hungary" >Hungary</option>
<option value="Iceland" >Iceland</option>
<option value="India" >India</option>
<option value="Indonesia" >Indonesia</option>
<option value="Iran" >Iran</option>
<option value="Iraq" >Iraq</option>
<option value="Ireland" >Ireland</option>
<option value="Israel" >Israel</option>
<option value="Italy" >Italy</option>
<option value="Jamaica" >Jamaica</option>
<option value="Japan" >Japan</option>
<option value="Jordan" >Jordan</option>
<option value="Kazakhstan" >Kazakhstan</option>
<option value="Kenya" >Kenya</option>
<option value="Kiribati" >Kiribati</option>
<option value="North Korea" >North Korea</option>
<option value="South Korea" >South Korea</option>
<option value="Kuwait" >Kuwait</option>
<option value="Kyrgyzstan" >Kyrgyzstan</option>
<option value="Laos" >Laos</option>
<option value="Latvia" >Latvia</option>
<option value="Lebanon" >Lebanon</option>
<option value="Lesotho" >Lesotho</option>
<option value="Liberia" >Liberia</option>
<option value="Libya" >Libya</option>
<option value="Liechtenstein" >Liechtenstein</option>
<option value="Lithuania" >Lithuania</option>
<option value="Luxembourg" >Luxembourg</option>
<option value="Macedonia" >Macedonia</option>
<option value="Madagascar" >Madagascar</option>
<option value="Malawi" >Malawi</option>
<option value="Malaysia" >Malaysia</option>
<option value="Maldives" >Maldives</option>
<option value="Mali" >Mali</option>
<option value="Malta" >Malta</option>
<option value="Marshall Islands" >Marshall Islands</option>
<option value="Mauritania" >Mauritania</option>
<option value="Mauritius" >Mauritius</option>
<option value="Mexico" >Mexico</option>
<option value="Micronesia" >Micronesia</option>
<option value="Moldova" >Moldova</option>
<option value="Monaco" >Monaco</option>
<option value="Mongolia" >Mongolia</option>
<option value="Montenegro" >Montenegro</option>
<option value="Morocco" >Morocco</option>
<option value="Mozambique" >Mozambique</option>
<option value="Myanmar" >Myanmar</option>
<option value="Namibia" >Namibia</option>
<option value="Nauru" >Nauru</option>
<option value="Nepal" >Nepal</option>
<option value="Netherlands" >Netherlands</option>
<option value="New Zealand" >New Zealand</option>
<option value="Nicaragua" >Nicaragua</option>
<option value="Niger" >Niger</option>
<option value="Nigeria" >Nigeria</option>
<option value="Norway" >Norway</option>
<option value="Oman" >Oman</option>
<option value="Pakistan" >Pakistan</option>
<option value="Palau" >Palau</option>
<option value="Panama" >Panama</option>
<option value="Papua New Guinea" >Papua New Guinea</option>
<option value="Paraguay" >Paraguay</option>
<option value="Peru" >Peru</option>
<option value="Philippines" >Philippines</option>
<option value="Poland" >Poland</option>
<option value="Portugal" >Portugal</option>
<option value="Puerto Rico" >Puerto Rico</option>
<option value="Qatar" >Qatar</option>
<option value="Romania" >Romania</option>
<option value="Russia" >Russia</option>
<option value="Rwanda" >Rwanda</option>
<option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
<option value="Saint Lucia" >Saint Lucia</option>
<option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
<option value="Samoa" >Samoa</option>
<option value="San Marino" >San Marino</option>
<option value="Sao Tome and Principe" >Sao Tome and Principe</option>
<option value="Saudi Arabia" >Saudi Arabia</option>
<option value="Senegal" >Senegal</option>
<option value="Serbia and Montenegro" >Serbia and Montenegro</option>
<option value="Seychelles" >Seychelles</option>
<option value="Sierra Leone" >Sierra Leone</option>
<option value="Singapore" >Singapore</option>
<option value="Slovakia" >Slovakia</option>
<option value="Slovenia" >Slovenia</option>
<option value="Solomon Islands" >Solomon Islands</option>
<option value="Somalia" >Somalia</option>
<option value="South Africa" >South Africa</option>
<option value="Spain" >Spain</option>
<option value="Sri Lanka" >Sri Lanka</option>
<option value="Sudan" >Sudan</option>
<option value="Suriname" >Suriname</option>
<option value="Swaziland" >Swaziland</option>
<option value="Sweden" >Sweden</option>
<option value="Switzerland" >Switzerland</option>
<option value="Syria" >Syria</option>
<option value="Taiwan" >Taiwan</option>
<option value="Tajikistan" >Tajikistan</option>
<option value="Tanzania" >Tanzania</option>
<option value="Thailand" >Thailand</option>
<option value="Togo" >Togo</option>
<option value="Tonga" >Tonga</option>
<option value="Trinidad and Tobago" >Trinidad and Tobago</option>
<option value="Tunisia" >Tunisia</option>
<option value="Turkey" >Turkey</option>
<option value="Turkmenistan" >Turkmenistan</option>
<option value="Tuvalu" >Tuvalu</option>
<option value="Uganda" >Uganda</option>
<option value="Ukraine" >Ukraine</option>
<option value="United Arab Emirates" >United Arab Emirates</option>
<option value="United Kingdom" >United Kingdom</option>
<option value="United States" >United States</option>
<option value="Uruguay" >Uruguay</option>
<option value="Uzbekistan" >Uzbekistan</option>
<option value="Vanuatu" >Vanuatu</option>
<option value="Vatican City" >Vatican City</option>
<option value="Venezuela" >Venezuela</option>
<option value="Vietnam" >Vietnam</option>
<option value="Yemen" >Yemen</option>
<option value="Zambia" >Zambia</option>
<option value="Zimbabwe" >Zimbabwe</option>
</select>
<label for="element_2_6">Country</label>
</div>
</li> <li id="li_5" >
<label class="description" for="element_5">Work Phone </label>
<span>
<input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_1">(###)</label>
</span>
<span>
<input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
<label for="element_5_2">###</label>
</span>
<span>
<input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
<label for="element_5_3">####</label>
</span>
<p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
</li> <li id="li_22" >
<label class="description" for="element_22">Schedule </label>
<div>
<textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
</div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
</li> <li id="li_7" >
<label class="description" for="element_7">Profile Picture </label>
<div>
<input id="element_7" name="element_7" class="element file" type="file"/>
</div>
</li> <li id="li_8" >
<label class="description" for="element_8">Portfolio image </label>
<div>
<input id="element_8" name="element_8" class="element file" type="file"/>
</div>
</li> <li id="li_9" >
<label class="description" for="element_9">Portfolio image </label>
<div>
<input id="element_9" name="element_9" class="element file" type="file"/>
</div>
</li> <li id="li_10" >
<label class="description" for="element_10">Portfolio image </label>
<div>
<input id="element_10" name="element_10" class="element file" type="file"/>
</div>
</li> <li id="li_11" >
<label class="description" for="element_11">Portfolio image </label>
<div>
<input id="element_11" name="element_11" class="element file" type="file"/>
</div>
</li> <li id="li_13" >
<label class="description" for="element_13">Portfolio image </label>
<div>
<input id="element_13" name="element_13" class="element file" type="file"/>
</div>
</li> <li id="li_14" >
<label class="description" for="element_14">Portfolio image </label>
<div>
<input id="element_14" name="element_14" class="element file" type="file"/>
</div>
</li> <li id="li_15" >
<label class="description" for="element_15">Portfolio image </label>
<div>
<input id="element_15" name="element_15" class="element file" type="file"/>
</div>
</li> <li id="li_16" >
<label class="description" for="element_16">Portfolio image </label>
<div>
<input id="element_16" name="element_16" class="element file" type="file"/>
</div>
</li> <li id="li_17" >
<label class="description" for="element_17">Portfolio image </label>
<div>
<input id="element_17" name="element_17" class="element file" type="file"/>
</div>
</li> <li id="li_18" >
<label class="description" for="element_18">Portfolio image </label>
<div>
<input id="element_18" name="element_18" class="element file" type="file"/>
</div>
</li>
<li class="buttons">
<input type="hidden" name="form_id" value="836144" />
<input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
</li>
</ul>
</form>
<div id="footer">
</div>
</div>
<img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
</body>
</html>I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O. -
How to make the text in sub-division
Hi,
I am usign text module in my adobe forms.
Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line.
While in pdf, all the sub-division combines and comes a single paragraph.
What would be the problem for this issue? Any Idea?
May I know how to make the text in sub-division as in text module?
Thanks,
Thiyagu
Edited by: Thiyagu on Oct 26, 2009 7:08 PMHello, experiment with Object - Field tab. Do you have your text field with "allow multiple lines" checked? I guess so. And what about the field format? Plain text or Rich text? Please try:)) Regards, Otto
-
How to make the dblink and what is the use of this
plz any body tell me "how to make the dblink and what is the use of this"
sujitDo you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed. -
How to make the vendor column have figure in GRIR line item with RE document type?
Dear Experts,
Could you tell me how to make the vendor column have figure in GRIR line item whose document type is RE?
Thanks!
Xinling ZhangHi ,
You are using FAGLL03 .
FAGLL03 report vendor code is blank
vendor number in new FAGLL03 tcode (offsetting account information)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&…
Also check OSS note
Note 112312 - Line item: Display of offsetting a/c information
Note 1034354 - FAGLL03: Display of offsetting account information
Many Thanks -
How to make the Page UP and down work on a table control screen?
Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
VjTake this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
WHEN 'P--'.
CLEAR ok_code.
PERFORM paging USING 'P--'.
WHEN 'P-'.
CLEAR ok_code.
PERFORM paging USING 'P-'.
WHEN 'P+'.
CLEAR ok_code.
PERFORM paging USING 'P+'.
WHEN 'P++'.
CLEAR ok_code.
PERFORM paging USING 'P++'.
*& Form PAGING
* Form to do scrolling for screen XXXX
* -->CODE OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
j TYPE i.
CASE code.
WHEN 'P--'. <table control name>-top_line = 1.
WHEN 'P-'.
<table control name>-top_line =
<table control name>-top_line - line_count.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
WHEN 'P+'.
i = <table control name>-top_line + line_count.
j = <table control name>-lines - line_count + 1.
IF j LE 0. j = 1. ENDIF.
IF i LE j.
<table control name>-top_line = i.
ELSE.
<table control name>-top_line = j.
ENDIF.
WHEN 'P++'.
<table control name>-top_line =
<table control name>-lines - line_count + 1.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
ENDCASE.
ENDFORM. " PAGING
Regards,
Ravi -
How to make the main() thread wait?
I would like to know how to make the main() thread wait for another thread?If I use wait() method in main() method it says "non-static method wait() cannot be referenced from a static context",since main()
is static.Here is an example how you may wait for a Thread in the main -
but be careful, this is no real OO:
public class WaitMain {
// this is the thread class - you may also create
// a runnable - I use a inner class to
// keep my example simple
public static class ThreadWait extends Thread{
public void doSomething(){
synchronized(syncObject){
System.out.println("Do Something");
syncObject.notify();
public void run(){
// sleep 10 seconds - this is
// a placeholder to do something in the thread
try{
sleep(10000);
doSomething();
sleep(10000);
catch(InterruptedException exc){
// this is the object we wait for -
// it is just a synchronizer, nothing else
private static Object syncObject = new Object();
public static void main(String[] args) {
System.out.println("This will start a thread and wait for \"doSomething\"");
ThreadWait t= new ThreadWait();
t.start();
synchronized(syncObject){
try{
// this will wait for the notify
syncObject.wait();
System.out.println("The doSomething is now over!");
catch(InterruptedException exc){
// do your stuff -
Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?
If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary? -
How to make the exe always visible in the illust application.
Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
Regards,
PrabudassHi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.
Maybe you are looking for
-
Uninstall firefox after trying add and remove akso Mozilla,s instructions
I am using Mozilla Firefox version !8.0(x86 en gb on windows Xp) I wish to un-install Mozilla Firefox. I tried the usual "Add and Remove" from Control Panel, this did not work which in its self is odd. I then tried the Mozilla site and followed those
-
How do I bypass my computers DEP, so I can open itunes?
Everytime i try to access itunes, my computer says it's not available in my country. Aterwards when I close itunes, my computer messeages me saying the DEP has prevented it from opening. I've tried going into the DEP settings on my computer and tried
-
How to create Credit or Debit Memo for Third party orders
Dear All, Is it possible to create Credit or Debit Memo for the Third party Orders. Is there any standard procedure to do that? Kindly explain. Regards, Mullairaja
-
Synchronos inbound ( proxy ) configuratin issue ?
Hello Friends, I have designed a Synchronos inboud interface where 2 parameters are comming in as request and response is a str with 10 fields. I could have easily done this using RFC,but thought to give a try to proxies... I have creaed server proxy
-
Buenas tardes estimados, Configure el web dispatcher con solman pero el webdispatcher solo me permite acceder a los servicios del stack de java que corren en el puerto 50000 pero no me deja ver los servicios abap de la SICF que corren en el puerto 80