Inline Search with Library and Link App Part

I have created a wiki page with a Library app part on it.  The search box option is checked and it displays as expected as part of the Library app part.  At this point I can type in the search box and it filters the library as expected -everything
is working.
Then I add any type of app part with a list component - Promoted links, Calendar in list view, etc.  Now when I type a term in the search box on the library it does it does not filter the library.  It list the same items as prior to the search
except it now displays "Some items may be hidden..." at the bottom.  The list box (which I was not trying to search) displays "No results found"
I am completely stuck on why inline search is not working for the library if their is a list on the same page.
SharePoint Foundation 2013
Thanks for any help!
 

Hi Michelle,
Per my test, it seems that SharePoint Foundation does not support inline search.
Could you please re-check SharePoint version and its build number for further research?
If this issue is related to SharePoint Server 2013, then it is a by design issue that the inline search will not work correctly after installing SP1 for SharePoint and this issue is resolved if August 2014 CU is installed.
You can check this similar thread below:
https://social.technet.microsoft.com/Forums/en-US/1871c82d-73a6-412a-a4be-b4565d949440/inplace-library-search-and-multiple-list-view-webparts-on-a-page
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

  • My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
    Close all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HTML content with images and links blocked

    Hello,
    I very much need some help here because my company needs to send out newsletters to our clients in HTML format soon and so far the email with HTML content is being blocked as spam while text content works fine. Specifically, whenever I add a link or an image in HTML content, the email doesn't go through. I tried sending in multipart format but it is also not sending HTML with images and links. Here is my attempt:
                                    props.setProperty("mail.transport.protocol", "smtp");
                                     props.setProperty("mail.host", "mail.server.com");
                                     props.setProperty("mail.user", "joeuser");
                                     Session mailSession = Session.getDefaultInstance(props, null);
                                     mailSession.setDebug(true);
                                     Transport transport = mailSession.getTransport();
                                     MimeMultipart mp = new MimeMultipart("alternative");
                                     MimeBodyPart htmlPart = new MimeBodyPart();
                                     MimeBodyPart textPart = new MimeBodyPart();
                                     textPart.setText("Just to make it multipart");
                                     htmlPart.setHeader("MIME-Version", "1.0");
                                     htmlPart.setHeader("Content-Type", htmlPart.getContentType());
                                     htmlPart.setContent(strHtmlMessage, "text/html");
                                     mp.addBodyPart(textPart);
                                     mp.addBodyPart(htmlPart);
                                     MimeMessage message = new MimeMessage(mailSession);
                                     message.setHeader("MIME-Version", "1.0");
                                     message.setHeader("Content-Type", mp.getContentType());
                                     message.setHeader("X-Mailer", "Recommend-It Mailer V2.03c02");
                                     message.setContent(mp);
                                     message.setSubject(strSubject);
                                     message.setFrom(new InternetAddress("[email protected]"));
                                     message.addRecipient(Message.RecipientType.TO,
                                             new InternetAddress("[email protected]"));
                                             transport.connect();
                                             transport.sendMessage(message,
                                             message.getRecipients(Message.RecipientType.TO));
                                     transport.close();This code is one of my numerous attempts to make HTML send images and links. Please, let me know if there is a workaround way to make JavaMail send HTML with links and images in the message body. Your help will be greatly appreciated.

    The JavaMail FAQ has information on creating HTML messages, including
    messages with both plain text and HTML. Did you find it?
    BTW, your code has many unnecessary statements, such as setting
    the Mime-Version header, which JavaMail will do for you, and setting
    the Content-Type header, which JavaMail does as a side-effect of the
    setContent or setText calls.
    Other than that, it looks like your code should be correctly creating a
    multipart/alternative message. If the recipient is still rejecting it you
    need to figure out what it is about the message that makes the recipient
    think it's spam. Can you send a similar message using another mailer?
    Can you send the message to a different recipient?

  • I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

    I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
    Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
    FROM: Terry Weber, Email: [email protected]

    https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

  • Does Creative Cloud work with InDesign and linked files?

    Does Creative Cloud work with InDesign and linked files?

    This will work for online storage.
    The preview you will see on the website but will be what you see on your desktop if the the folder was missing. If you want someone else to be able to see a preview online to give comment feedback you could export out a PDF file of the work-in-progress and upload it.
    If you just want to work on the project at different locations it might be easier to zip up everything into a single file and upload it. Then download it onto the computer where you want to work and unzip it.

  • I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

    I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

    What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
    Matt

  • Lost link between iPhoto library and iPhoto.app

    While learning how to use Photoshop Elements 4.0 and Bridge, I made the choice to "browse" in Bridge. When I next started iPhoto 6.06, my link to the Library was lost. I have worked with AppleCare support, done every exercise short of creating a new library and losing my organization. With 20,000 + photos I would like to avoid that exercise. I do have backups but am trying to figure out if I can solve this any other way. All my files are still in iPhoto Library, and I can see the organization of my albums in Bridge. With some exercises, I get the message: "Unreadable files: 1. The following file could not be imported: '/Users/john/Pictures/iPhoto Library/Library.iPhoto.'"
    If I delete Adobe Photoshop Elements and Bridge from the hard drive, will this help? I promise I did not do anything within iPhoto Library in Finder!
    Thanks so much!
    iMac   Mac OS X (10.4.9)   iPhoto 6.06
    iMac   Mac OS X (10.4.9)   iPhoto 6.06
    iMac   Mac OS X (10.4.9)   iPhoto 6.06

    cdkayak
    Welcome to the Apple Discussions.
    There's absolutely no harm in using PSE with iPhoto, it's Bridge that's a killer. So that's what you chuck from your machine. Set up PSE as an external editor in the iPhoto Preferences. That way you can double click a pic in iPhoto and it will open automatically in PSE, save it PSE and have it come back into iPhoto seamlessly.
    What's likely happened here is that you have (or Bridge has) made changes in the iPhoto Library Folder which has broken the link between iPhoto and the library files.
    Some things to try:
    Hold down the option (or alt) key and launch iPhoto. Choose Locate, and point iPhoto at the iPhoto Library Folder.
    What Back Ups do you have? If there's an up-to-date one, then try copying the library6.iphoto file from it to the iPhoto Library Folder allowing it to overwrite the confused one.
    That said, if these don't work, your options will only be to create and populate a new library: To create and populate a new library:
    Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
    Move the iPhoto Library Folder to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Finally, the message
    "Unreadable files: 1. The following file could not be imported: '/Users/john/Pictures/iPhoto Library/Library.iPhoto.'"
    is because iPhoto will not import a picture that's in the active iPhoto Library Folder - a sensible precaution against duplication.
    Regards
    TD

  • Problem with library and vault

    I would like to know how to take all photos out of Aperture and start over.
    When I upgraded to V.3, I think I set things up incorrectly. I had a vault but now there is no vault and I now have folders that appear under Projects & Albums that indicate Aperture Vault, Aperture Vault (1) and Aperture Vault (2). I did not make these folders. There are duplicates of photos in "Aperture Vault and Aperture Vault (1)" folders. I had used an external drive for the vault with V2 and now there is a Aperture Vault on the external drive and also on the internal drive and also an Aperture Library on both the internal and external drives. In the Vault and Vault (1) folders there are folders with the same names but different numbers of photos in the projects. I just would really like to start over and import my photos again; I don't really care about adjustments at this point, only the masters.
    Vault
    Vault(1)

    Linda,
    You did not post the entire screenshot of your Library Inspector, but I suspect I know what's going on.  Is the "Vault" a blue folder, as well as the "Vault(1)"? 
    I also have a top-level folder called "SimpleDrive Vault", which was the name of an Aperture 2 vault which I had to restore. (I had the unfortunately coincidence of a hard drive going bad the day I was intended to install Aperture 3.  I got a new hard drive, installed Ap 3, and then restored the Ap 2 library to start.)  When restoring your vault, Aperture may just create a new top-level folder with your vault name underneath it.  There is nothing wrong with it.  It is not your vault.  It is a folder with your vault name.  You can choose to restructure everything (I.e., drag and drop stuff wherever you want), although you may have duplicates. 
    I imagine that the duplicates are part of the problem you are trying to solve.  However, there is no way around it.  To "start over", as you asked, you will necessary have to send every photo outside of Aperture, duplicates included, and them import them.  I.e., you will have duplicates no matter what.
    To answer your question specifically, the best way to "start over" in your case is probably to "relocate Masters" for every photo in your library to a location of your choosing, trash your library (which would then contain only your project structure, and not any photos), and then create a new library and reimport your photos.  Keep in mind what I stated above, though.  You will just end up with a new library with the same structure as the old library.
    nathan

  • Old library and syncing apps

    Hi. Yesterday my harddrive crashed so now i have a new one. I just bought 2 apps from app store in iTunes and now i cant sync them to my phone without erasing all my other apps on the phone (different library and i cant access the library because my old harddrive is dead). How do i get the apps i bought to my new library so i can sync all the apps to my phone?
    Thank you

    in other words:
    new harddrive, and therefore new itunes library. I have all my apps on my old library on my old harddrive whitch i cant access because it is broken. On the library on my new harddrive i have 2 new apps and i want to sync them to my phone. The problem is that in order to sync them i need to replace all the other apps because they are from another library.
    What i need is to get the old apps to my new library so i can sync them with my new apps over to my phone. I have no access to my old library. Please help!

  • ITunes install when old HD with library and media is installed as 2nd local HD on new computer

    Hello support community:
    My (Windows 7) laptop died unexpectedly. I didn't have a chance to consolidate my itunes library, and my files are not all in the itunes folder.
    The replacement (Windows 7) laptop has space for a second hard drive, so I installed the hard drive from the dead laptop, with all my music files and itunes library. All my old data is now on my new Local Disc E. Windows is installed on C. I could copy all my music to C, but will probably leave E installed for the life of this laptop anyway.
    Is it possible to move my itunes library data, such as playlists, play counts and star ratings,  to the new itunes installation?
    Will iTunes library search for the media files on the same drive where the library folder is located (E:folder\subfolder) or at the path where it was previosly located (C:\folder\subfolder)
    Thanks for any advice!
    -M

    Lynda-
    If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync.  Now that you have it updated, you will not need to do that again.
    Fred

  • Custom html file with pix and links as Mac desktop display?

    Hi, in Windows it is possible to select an html file to use as your desktop display...pictures, web links, and links to network and local folders, files, and applications can be written directly into the html page. It was actually really nice.
    How can this be done on a Mac?
    It would be great to have personal pictures, text (poems and to do lists) displayed as the desktop background...with links to files (inspirational .mov files, recently used files, even the html file for the desktop itself for quick changes), links to start applications, and links to favorite websites...all accessible from the desktop itself.
    Alternatively, would these links need to be placed in the dashboard or expose or ? Would the text over a background image in html need to be composited into a static image file?
    thanks

    I don't believe there is a way in the Mac world to specify anything but image files to be used as your desktop.
    I might suggest that you open the HTML fileof your choice in a browser, and take a screen shot of the output. Then you can assign that screen shot to be your desktop.
    Command-shift-4 will give you a crosshair cursor to drag around the area you wish to capture.

  • Issues with editing in Acrobat 5 with Form and link tool

    In my version of Acrobat 5, I used to be able to edit with the form and link tools. Now for example if I try to add an action in the execute menu item in the Field Properties (Form tool or Link mode), it brings up a splash window saying 'Please select the menu item you want to execute from the menu bar' and that is it, It does not bring up a list so I  can not add an executable item.
    PowerBook G4 (ti) - Mac OS X 10.4.11
    Any ideas, as it is really frustrating.

    Ok... so I have created a file in InDesign and exported it as a .pdf to create an interative document.
    I am trying to add next page from page 1 and so on, and also hyperlinks to e-mail addresses.
    I create a box by dragging using Form Tool (F) whereby Field properties window pops up.
    I Name the item and choose what type of button I require, and modify the settings in Appearance.
    When I then go to choose an Action... I choose mouse up, then Add... which brings up the Add an Action window.
    I choose 'Execute Menu Item' from the drop down list and then try to 'Edit Menu Item' this brings up a further window 'Menu Item' with the message "Please select the menu item you want to execute from the menu bar" and here I try to choose the type of item I need to execute.
    I have tried clicking on the item on the menu bar, but it makes a faint sound when I click with my mouse... but no no item is executed.
    I have done this before with previous documents, but not for a while... but it does not seem to want to do it this time around.
    However, I can execute the following in the same window 'Edit Menu Item'
    Import Form Data
    JavaScript
    Movie
    Open File
    Read Article
    Reset Form
    Show/Hide Field
    Sound
    Submit Form
    World Wide Web Link
    Any thoughts?

  • Trouble with opening and using Apps

    Apps such as Netflix and Words with Friends do not work correctly; when I tap on them, they flash for a second only and then disappear back as just icons.

    When an app misbehaves I try the following.
    1. Quit the app like I describe and try it again.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then start the app again and see if it functions correctly.
    2. If the first item did not work I will quit the app again then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. Then start the app again.
    3. Still not working? I will delete the app and download it again from the App Store.
    4. If non of these get the app running properly I will contact the developer of the app to see if they are aware of a problem.

  • Does Oracle Support Searches with Sentence and Paragraph Proximity?

    I have successfully used SENTENCE and PARAGRAPH special groups and the WITHIN operator to search for terms contained within the same sentence and/or paragraph. However, I also need to search for terms that are located within a variable number of sentences or paragraphs of each other. For example, I could search for the term 'dog' and the 'cat' located within 3 sentences of each other. Is this possible in Oracle Text? I have searched the documentation and I can only find the 'near' operator for searching based on word proximity. I cannot find any mention of sentence or paragraph proximity. This is a very important requirement for the system.

    Good question. We are trying to duplicate the functionality of an existing system. It was written into the requirements for the new system. I've asked how important this functionality is to the actual users, but we don't have the answer to that question yet. Knowing that Oracle Text does not support this out of the box, we will certainly need to evaluate the importance of this feature and determine whether it warrants some custom development or switching to another search technology.
    I've thought about using regular expressions to implement this feature, but I'm guessing that the performance wouldn't be that great and it wouldn't integrate well with other Oracle Text searches. Has anyone else used regular expressions combined with Oracle Text to implement more sophisticated searching capabilities?

  • I am having trouble with safari and most apps shutting down when I'm in the middle of stuff what do I need to do to resolve this?

    I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)

    Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
    Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for