Inna - party never ends deluxe version
inna - party never ends deluxe version album of turkey in the apple store when it can be added ?
Message was edited by: ozgurcanartuner
Ozgur,
As fellow users, we do not know what items will be added. However, there is a page for content you would like to suggest to the iTunes Store:
http://www.apple.com/feedback/itunes.html
Also, you should check other music retailers that are available in your country..
Similar Messages
-
Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.
iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.
-
I bought Noal Gallagher's High flying birds on my i-phone 4, it stated that when i next connected to the i-tunes stoes i would recieve the deluxe version. I never did, is there a way i can actually get it without paying a again?.
I almost forgot that using folders can allow each folder to contain a song. I also recall touch tracks or one key play...
-
Dear All,
We are using 10.2 version of OWB and we have around 80 mappings in one module daily we are running the mappings parallel through control center for the time consuming (manually). but one mapping still running normally it takes 1:30 to 2:00 hrs time to finish but some times it is taken almost 5 to 6 hrs some times it never end. at that situation we stopped the mapping.but while we check the target table data is coming perfect.
Let me know the cause of this and how to salve it.
Thanks,Hi,
When you kill the mapping from the Control Center the DB session which was triggered by mapping won't kill , you may see the session still running from Session Browser or any other way. This may be the reason you see the data in the Target table. to test this you may start regular running mapping and kill it from CC and observe the session from Database and you may see the data in the target table too.
This may be one possibility. I am not saying what others say is wrong . I had experienced this issue before and i had to tune my code to get the mapping run consistent.
Suresh -
Suddenly never ending pinwheel and slower than usual
My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it. -
D10, boot problems, a never ending fan test!
I hate this noisy fan test!!! My dog always panics, if it is in the room! But that's not the problem.
If I switch on the external mains, the fan test starts and ends after some ten seconds.
If I push the switch at the front of the maschine, the fan test starts and - sometimes - never ends. In this case, the maschine - obviously - will not boot. What to do? - Repeat the procedure. Sometimes I need 10 or more attempts to boot the maschine.
Now I found (shortly before I decided to bring the maschine back to the dealer): The fan test succeeds nearly every time (and the maschine will boot), if I switch off all the external USB-devices (5 disks, WLAN-stick, memory stick, etc).
My questions:
what's going wrong with the fan test at my maschine?
is it possible to skip this crazy fan test?
Thanks for your help!
Lenovo PC Think Station D10 6427-H6G, Windows XPregarding the fan test, this cannot be disabled. thinkstations are designed for 24/7 uptime just like servers and the BIOS tests the fans at every boot/reboot. since there isn't much reason to turn these systems off or put them asleep, the best workaround is to leave your D10 running 24/7 as it was designed to do. mine only gets rebooted for windows updates, software updates, or video driver updates. otherwise, it's up 24/7/365.
regarding the fans getting stuck, update your BIOS. the latest version can be found here.
also, if you put your system to sleep, be sure to wake it with the power button and not your keyboard. a few users have reported their fans getting stuck when waking with their keyboards. i'm not aware of the issue happening when using the power button.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
I have a new 32mb Touch. I originally synced it while on vacation with PC #1, and it worked perfectly. Now I am home, and I have attempted to sync it with PC #2.
I tried several times to sync to PC #2, and each time it would successfully transfer all (or most) of my media, but the sync process would never end.
I am using iTunes 7.6.1.9, and my Touch is version 1.1.3 with Software Upgrade.
I even went so far as to do a total restore of the Touch, but this doesn't seem to fix the problem.
Any advice would be appreciated.I ended up calling Apple, and they had me completely reformat the iPod. This seemed to fix the problem.
-
my uploading to ANY site NEVER ends!!! tis problem only Firefox experiences!!! it doesn't matter what site I upload to Firefox displays a uploading and never stops for eternity!!! I tried an extension called 'upload progress' to see what the slowness is, and when it gets to 100% I NEVER get redirected to the next step in the upload progress!!! Facebook, Forums, image sites, everything I upload to experiences this issue on Firefox
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Have a wonderful day!
~Jake -
Hi,
I have been developping my app since 2 month now and I never had any problem with creating test ipas (ie:target = ipa-test). But when I decided to create my final build for the app store (target = ipa-app-store) the process never ends.
I run the compilation and it seems to be doing something (I can see the temp files and hear the fans) but it just doesn't stop. I tried many times and usually kill the process after an hour or so.
I know that other people had a similar problem but I didn't find any official answer for it. Is it a bug? Does it have a workaround?
I'm on a Mac with Snow Leopard and tried to build the ipa from both Flash CS5 and a custom ant build.
I would really appreciate some feedback about it.
Cheers,
BenFirst and foremost, compiling for iOS takes a lot of resources, it cannot be compared to packaging for Android, because the process is completely different, AIR on Android runs interpreted code, while on iOS it is native code, before deciding the compilation is stuck you should check the java/adt processes aren't doing anything. It's been said future AIR versions will reduce iOS compilation times.
Second, I've seen iOS compilation fail and take forever only when using certain ANEs and Flash Builder versions. FB doesn't take too well certain ANE warnings and errors, and instead of ignoring or finishing the process showing some alert, it just sits there making you wait forever. If you are using ANEs in your project, you should isolate the problematic one, and then determine what may be the cause... if some problem with the iOS SDK used with your AIR SDK, if the ANE is causing some unimportant warnings but your IDE doesn't like them, etc. -
I am using I Photo 4.0.3. When I start it, loading pictures never ends and I cannot use I Photo; What can I do?
When did this begin? Did you run any updaters just before this began and, if so, what were they?
That's a very old iPhoto version so give this a try:
1 - launch iPhoto with the Command+Option keys held down.
2 - select Options #3 and #4.
4 - Rebuild the library.
If that fails to help continue with this:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
SQL Server Multiple JOINS with Table Value Function - query never ends
I have a query with 4 joins using a table value function to get the data and when I execute it the query never ends.
Issue Details
- Table value function
CREATE FUNCTION [dbo].[GetIndicator]
@indicator varchar(50),
@refDate datetime
RETURNS
TABLE
AS
RETURN
SELECT
T1.Id ,T1.ColINT_1, T1.ColNVARCHAR_1 collate DATABASE_DEFAULT as ColNVARCHAR_1 ,T1.ColNVARCHAR_2 ,T1.ColSMALLDATETIME_1, T1.ColDECIMAL_1, T1.ColDECIMAL_1
FROM TABLE2 T2
JOIN TABLE3 T3
ON T2.COLFKT3 = T3.Id
AND T3.ReferenceDate = @RefDate
AND T3.State != 'Deleted'
JOIN TABLE4 T4
ON T2.COLFKT4 = T4.Id AND T4.Name=@indicator
JOIN TABLE1 T1
ON T2.COLFKT1=T1.Id
- Query
DECLARE @RefDate datetime
SET @RefDate = '30 April 2014 23:59:59'
SELECT DISTINCT OTHERTABLE.Id As Id
FROM
GetIndicator('ID#1_0#INDICATOR_X',@RefDate) AS OTHERTABLE
JOIN GetIndicator('ID#1_0#INDICATOR_Y',@RefDate) AS YTABLE
ON OTHERTABLE.SomeId=YTABLE.SomeId
AND OTHERTABLE.DateOfEntry=YTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_Z',@RefDate) AS ZTABLE
ON OTHERTABLE.SomeId=ZTABLE.SomeId
AND OTHERTABLE.DateOfEntry=ZTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_W',@RefDate) AS WTABLE
ON OTHERTABLE.SomeId=WTABLE.SomeId
AND OTHERTABLE.DateOfEntry=WTABLE.DateOfEntry
JOIN GetIndicator('ID#1_0#INDICATOR_A',@RefDate) AS ATABLE
ON OTHERTABLE.SomeId=ATABLE.SomeId
AND OTHERTABLE.DateOfEntry=ATABLE.DateOfEntry
Other details:
- SQL server version: 2008 R2
- If I execute the table function code outside the query, with the same args, the execution time is less the 1s.
- Each table function call return between 250 and 500 rows.Hi,
Calling function in general is a costly query. And definitely joining with a function 5 times in not an efficient one.
1. You can populate the results for all parameters in a CTE or table variable or temporary table and join (instead of funtion) for different parameters
2. Looks like you want fetch the IDs falling to different indicators for the same @Refdate. You can try something like this
WITH CTE
AS
SELECT
T1.Id ,T1.ColINT_1, T1.ColNVARCHAR_1 collate DATABASE_DEFAULT as ColNVARCHAR_1 ,T1.ColNVARCHAR_2 ,T1.ColSMALLDATETIME_1, T1.ColDECIMAL_1, T1.ColDECIMAL_1, T4.Name
FROM TABLE2 T2
JOIN TABLE3 T3
ON T2.COLFKT3 = T3.Id
AND T3.ReferenceDate = @RefDate
AND T3.State != 'Deleted'
JOIN TABLE4 T4
ON T2.COLFKT4 = T4.Id AND T4.Name=@indicator
JOIN TABLE1 T1
ON T2.COLFKT1=T1.Id
SELECT * FROM CTE WHERE Name = 'ID#1_0#INDICATOR_X' AND Name = 'ID#1_0#INDICATOR_Y' AND Name = 'ID#1_0#INDICATOR_Z' AND Name = 'ID#1_0#INDICATOR_W' AND Name = 'ID#1_0#INDICATOR_A' AND ReferenceDate = @RefDate.
Or you can even simplify more depends on your requirement.
Regards,
Brindha. -
I am trying to download MySQL for my new Leopard installation on a Power Mac Quad G5. I am choosing the 64 bit version (I assume that it correct) but my downloads never end... I have 60.4Mb of 60.4Mb but the download continues forever. I have tried both HTTP and FTP downloads, and using Safari as well as Firefox - it makes no difference. I have chosen various mirrors - no deal whatever I do...
Any clues?Hi Kirk,
Did you try to trash the download.plist
You will find it in this location ... Home_Folder>Library>Safari>Download.plist
Quit Safari browser when running an trash the plist file.
Now open Safari again an try to download the application you like ... Post back with the results.
Good luck ...
Dimaxum -
Never Ending "Waiting" Export Stills FCPX
I use Final Cut Pro X version 10.1.2 and when I try to export a still frame(jpeg or any format) I get a never ending waiting in the share window. This used to happen with about every 5-10 images and then would restart FCPX and it would be back to normal. Now it does it from the start and cannot export a single still for my work projects.
I have tried trashing Preferences, restarting computer, shut down computer, and resetting queue in Compressor settings even though I don't use compressor app for this process.
Any help or ideas on how to get back to processing stills is greatly appreciated! Thank you
Final Cut Pro X 10.1.2 r, OS X Mavericks 10.9.4After a bit more research I have actually found a solution!! Not sure what app nap is but I went and checked the "prevent app nap" box when I clicked "get info" on fcpx application.
I am now exporting images without any problems! Wooooot =D -
My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.
-My wifi connection is running strong
-All the devices run the same version of iOSTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Retraction for Capitals wbs keep running never end..
Hi all;
While running a retraction for capital wbs using this 'UPR_COST_PLAN_EXEC' FM, the job keeps running for hours never end, I can see the messages at the task bar 'Data summarized...' , 'data transfered..' etc..I don't get any error message or anything.
This is not a new function, it has been running well in the past and I never had any issue. We run this every month to retract monthly updates into R/3, The only thing I have changed between last month and this month are
On the planning level Version = 5 (I had 4 last month) this is the version this data gets stored in R/3.
Also the parameter grp version = 5.
Those should not cause this issue...Did anyone had this issue earlier? Pls write to me...as this is a production issue..I will assign good points.
thanks.
BKGot it figured out guys...thanks.
Buddhi R Kalakheti
Maybe you are looking for
-
Custom Report Layout with mutliple child tables
I am trying to create a custom report layout (using Bi Publisher) where I have parent data (multiple jobs on a page) and several child tables for each job (JobDays and JobStops) and several child tables for JobDays (JobDayProviders, JobDayCrew). On t
-
I dropped my G4and now no display, Is there any hope?
I purchased my power book in 2003, when times were good, but 2 years ago I dropped it, broke the hinges and even though the screen lights up, there is no display. I love my Apple and I miss it. I took it to a repairman and he said it was hopeless, bu
-
'my shared photos' - can't move video
I have a video saved in 'my shared photos' but have deleted it from camera roll. However, when I select the video, although it plays, the button that brings up the 'message/mail/icloud/' options etc is not appearing so I cannot send the video to myse
-
Hi i have recently started doing a course in oracle financials. Could someone please tell me where i can get the oracle release 11i Software because i have searched all over and can't seem to find it. Or if someone can direct me to the actual site wh
-
Hello experts at Captivate! (I am not one of you!) I'm trying to set up a session where there are some quiz questions in the middle of the slides (11,12 and 13 out of 50 some slides), and the remainder of the quiz questions are at the end of the ses