Inport video clips from dvd

Hi
I like to know how to import video clips from a DVD? I tried and i could not figure out.
thanks

The VOB files must be demuxed.
When they are, there two generation losses involved.
If you edit and reencode to DVD, that's three generation losses.

Similar Messages

  • Is it possible to export a video clip from DVD player to iMovie '09?

    If I load a homemade DVD onto my iMac using Disk Utility and then import either the entire disc or portions of the disc into iMovie, that works just fine. However I noticed that some clips are missing in iMovie, even though they are on the iMac in form of a .dmg file on the desktop. The same file that was used to import in to iMovie. If I look at this file using DVD player, everything is there, but some of these clips are missing in the event window. So I created a video clip in DVD player of those pieces missing in iMovie and now how can I get these into iMovie?

    Hey, best way to import video from a DVD video disc for editing is to acctually have a simple video file. Use Handbrake or MPEG StreamClip to read the disc and create a video file off the video stream.
    You could also set in and out points anc manually create several clips, which may help with playback and rendering for editing. I don't know how extensive you're going to get in your editing with iMovie...
    Hope that helped.

  • Import video clip from DVD

    Can anyone help me learn what I need to import video clips from my family video DVD's? I created the DVD's from tapes through Pinnacle Studio 8 (before becoming a Mac fan).
    Thanks for any help you can give me,
    Ann

    Welcome to the  Discussion Forums.
    My personal choice would be to edit them to a compatible format such as DV, you can do this with mpegstreamclip (free) provided you have the QT mpeg2 playback component installed (think it's $30), there are other third party software solutions, no doubt others will have their favourites.

  • Transferring a 20 minute video clip from DVD to Mac

    Hi
    I would loke to transfer an old 20 minute clip from a DVD to my Mac. How do I do this?

    I'm assuming you have an external DVD drive. You can use Handbrake to 'rip' the DVD to your computer, assuming the DVD isn't copy-protected.
    http://handbrake.fr/

  • Video Clips from DVD Player

    While watching a personal DVD, converted from a VCR tape, I wanted to create & Save a clip.
    I performed a set start time and set stop time, followed by "Add". I then named the clip.
    Now I can't find the clip, which is supposed to be in my "clip collection". I haven't established a clip collection. Where would such a collection be established and later found? Thank you.

    In order to edit a DVD you have to make another one, in other words: bring the video into iMovie, edit, and burn a new DVD.
    You need to convert the VOB files on the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, as well as the the Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

  • How to Inport Video Clips From iPhone4 to iMovieHD6???

    How can I install video I shot on my iPhone4 onto iMovie HD 6???

    You would need to follow the same instructions for converting your video for your iPod.
    To convert a video for either your iPod or your iPhone:
    1. Open iTunes, select the video.
    2. Choose Advanced > Convert Selection for iPod.
    Converting a video for your iPhone can take several minutes to several hours, depending on your computer and on the length and content of the video.
    http://docs.info.apple.com/article.html?path=iTunesMac/7.1/en/879.html

  • Can not upload video clips from mini dvd

    When I try to upload video clips from mini DVD recorded on Sony Handycam it stats the files are read only.  I have tried finalized and un-finalized clips.

    golfer709
    Thank you for the reply.
    Although what I posted in my post numbered 2 is interesting and useful information in the Premiere Elements ripping of VOBs from DVD-VIDEO, it is not answering your issue regarding a "read only" issue and did not target your specific "read only" message. Sorry about that.
    The VOBs are typically read only files on the disc.
    I have never run into a "read only" issue with regard to the Premiere Elements 10 Windows 7 64 bit Add Media/"DVD Camcorder or PC DVD Drive"/Video Importer. For that matter, not with any version of Premiere Elements with this particular feature.
    When are you getting this message.
    a. When you click on DVD Camcorder or PC DVD Drive after Get Media
    b. When you click on Get Media in the Video Importer or other
    Do you ever get a thumbnail for the VTS_01_1.VOB in the Video Importer? Is your burner drive recognized in the Source field of the Video Importer?
    If you open and explore the DVD disc, go to the VTS_01_1.VOB in the VIDEO-TS Folder, go to the VOB's properties, can you remove
    the mark next to "read only" and then have the Video Importer route work for you?
    Also, if you copy the  VTS_01_1.VOB from the opened DVD disc and paste it to the computer desktop and remove the "read only" marking, can you then import
    the VTS_01_1.VOB into Premiere Elements with its Get Media/Files and Folders?
    ATR

  • How can I capture video clips from you tube or my own DVD's

    How can I capture video clips from my own DVD's or You Tube type of media, I am trying to create a presentation using Key Note 

    As long as you are using the clips with copyright permission (the organisation I work for has this for some distributers) try Wondershare (I am sure other converters are available). You can install an extension for Safari (I use FastestTube 2.2.9.3) to download from YouTube. However, please be aware that you could be breaking copyright laws when so doing.

  • How do I import video clips from iPhoto if it doesn't recognize the video clips in iMoive

    I'm trying to make a movie using iMovie and I recorded some clips using a Sony Digital Camera and iMovie won't let me upload the video clips from iPhoto. I try to import them but when i try to click on the file, it won't let me. Like its not bold like other files (It will let me upload video that were taken with my iPhone) I have iMovie 09.
    What do I need to do?
    Thanks!
    Ayca

    Do you plan to put each video clip in iDVD to be playes separately?  If so then here's how:
    1 - open iDVD and select your theme. 
    2 - click on the Media button at the bottom right and then on the Photo button at the top.
    3 - in the search window type in ".mov" (or the extension of the video clips you plan to use).
    4 - all of the video clips with the extension you entered will be displayed and you can drag them into the menu area at the left. 
    Another way would be to put all of the video clips in an Album and click on that album to view and drag the clips:
    Remember, the order that they are added to the menu will be the order that the buttons will highlight when you scroll thru the buttons with a DVD player remote.
    This will give you a menu with a separate button for each video clip (up to 12 in a menu with some themes).
    If you want to play all of the clips one after another you could create a slideshow in iDVD with the "+" button at the bottom and drag the video clips into the slideshow as you would still photos.  Set the slide duration to anything but manual and don't apply any transition.
    That will let you play all of the clips sequentially.
    OT

  • Import video clip from other project

    How to get video clip from other project?
    I have been saving all the clips into one huge project and I think it is time to divide them into different projects.
    Also, how do I know if the project would fit into one DVD when I burn it?
    Your help is greatly appreciated.
    Thank you,
    Karen

    You need iDVD for that.
    See the iMovie tutorials (in html and QT movie form) at:
    http://www.apple.com/support/imovie/
    (Scroll down a bit)
    See the iMovie tutorials (in pdf form) at:
    http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
    http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
    http://manuals.info.apple.com/en/iMovieLesson1.pdf
    http://manuals.info.apple.com/en/iMovieLesson2.pdf
    http://manuals.info.apple.com/en/iMovieLesson3.pdf
    http://manuals.info.apple.com/en/iMovieLesson4.pdf
    http://manuals.info.apple.com/en/iMovieLesson5.pdf
    http://manuals.info.apple.com/en/iMovieLesson6.pdf
    http://manuals.info.apple.com/en/iMovieLesson7.pdf
    See the iDVD tutorial at:
    http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
    http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
    http://manuals.info.apple.com/en/iDVDTutorial.pdf

  • How do i email a video clip from my iphone

    How do i email a 6 minute video clip from my iphone

    Open Photos > select video > tap forward icon (rectangle with arrow) > Email Video.  If the video file is too large for your, or the recipient's email server, it may not get delivered.
    You need this - it's all in there:
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
    Message was edited by: modular747

  • My mac won't open video clips from my iphone in iphoto since upgrading to snow leopard. Help.

    My Mac won't open video clips from my iphone in iphoto in iphoto since upgrading to Snow Leopard. Usually I just used to double click and the video clip would open, now nothing happens.  Help please.

    Can you access the material via the Finder or Image Capture (in your Applications Folder) ?

  • How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?

    How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?  (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • Since upgrading to FF Ver. 24, I can no longer view videos/clips from fox News. What add-on do I need? Everything else seems to be working OK.

    Since upgrading to ver. 24, I can no longer view the video clips from Fox News. the clip comes up but will not play. I don't have a problem using IE. I seldom use IE and FF is my main browser. What add-on or control do I need to rectify this situation? My e-mail is [email protected]
    ''(email obfuscated - please be cautious with posting your email address - c)''

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

Maybe you are looking for

  • How to add new fields to the DME file in F110

    Hi, We have a requirement add new fields to the file that is used in  F110. .I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file. Can anybody please help me in resolving the issue. Thanks Venkat Edited by: Ven

  • Web Service stub code different in FB4 than in Flex Builder 3

    We have an application that was initially developer in Flex Builder 3 and used the Import Web Service wizard to generate all the  webservice stub code we needed. We then upgraded to using Flash Builder 4 and importing the wsdl using the Connect to Da

  • How to validate the Email string

    Hi all, How do you validate for a valid email string under regular expressions? Regards David

  • Changes Happening in Portal

    Hello Folks, I have a requirement. I want to create a component and what that component should do is whenever any properties are changed or any changes are happening in the portal, it should fetch that user name and send a mail to specific users or g

  • I have unlimited texting but i cant send picture messages

    why cant I send picture messages if I have unlimited texting