Input = 0 in PBO and Field command in PAI

People,
I have the following situation:
In a online program I want:
- for a field A, in PBO set the value and disable the field (so, the user cannot change it)
- in PAI, I have to get this value to perform some processing. The problem is: when I made a command FIELD in PAI, this value is blank. Why? It is because the INPUT = 0 in PBO ?
Is there a solution?
Thanks a lot!

Hi,
Are you using the FIELD command for this particular field or some other field. If you are using the FIELD command to some other field than your input disabled field, you have to use the FM "DYNP_VALUES_READ" to get the value for that input disabled field.
Note: If you are passing a constant value always, please make use of that constant for your further calculations.
Regards,
Smart Varghese

Similar Messages

Additional field in infotype 0009 issue ( PBO and PAI )

Hi Guru,
I need your help please.
I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
Thanks very much in advance.
Regards.

Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
After more investigation, the probleme come from a check over country bank.
In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
call method cl_hrpad00_iban=>process_iban_pai
      changing
        cs_bankdata = ls_bank_data_current
      exceptions
        error_iban = 1
        others      = 2.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    call method cl_hrpad00_iban=>get_bank_data_old
      importing
        bank_data_old = ls_bank_data_old.
    if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
bank country changed -> leave screen needs to be done
      leave_screen = 'X'.
    endif.
But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
Thanks in advance for all yours reply.

Safari quits or freezes when I input text into a login field

Hello Everyone,
Heres the problem: Whenever I input text into some login fields (on pages I have been using for a long time w/ no previous problems), the app usually freezes, sometimes it quits. I have scoured the forums for people with the same problem, and have tried everything (reset safari, delete the ~library/preferences/com.apple.safari.plist file, I have followed the advice of an Apple article for determining the problem file, I have tried fixing keychain, I have repaired disk permissions, I have deleted & reinstalled Safari, all to no avail. Safari does work when I log in as administrator.
Please Help!
Here is the latest problem Report:
Date/Time: 2007-11-06 16:16:53.234 -0500
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [1193]
Version: 2.0.4 (419.3)
Build Version: 7
Project Name: WebBrowser
Source Version: 4190300
PID: 1316
Thread: 2
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0xb01a0000
Thread 0:
0 ...apple.AddressBook.framework 0x9479ecbe c4_ColOfInts::SetAccessWidth(int) + 24
1 ...apple.AddressBook.framework 0x9479bf4d c4_HandlerSeq::Prepare(unsigned char const**, bool) + 329
2 ...apple.AddressBook.framework 0x9479cdfd c4_FormatV::SetupAllSubviews() + 185
3 ...apple.AddressBook.framework 0x9479e574 c4_FormatV::Get(int, int&) + 28
4 ...apple.AddressBook.framework 0x9479e4f2 c4_Handler::GetBytes(int, c4_Bytes&, bool) + 36
5 ...apple.AddressBook.framework 0x9479e4bf c4_Sequence::Get(int, int, c4_Bytes&) + 77
6 ...apple.AddressBook.framework 0x948dd6f4 c4Reference::GetData(c4Bytes&) const + 44
7 ...apple.AddressBook.framework 0x9479e42e c4_ViewRef::operator c4_View() const + 46
8 ...apple.AddressBook.framework 0x9479d7e5 c4_Storage::Description(char const*) + 97
9 ...apple.AddressBook.framework 0x9479ef18 c4_Storage::GetAs(char const*) + 98
10 ...apple.AddressBook.framework 0x947a022f cacheViews + 317
11 ...apple.AddressBook.framework 0x9479a53a -[ABAddressBook nts_OpenContactManagerWithMode:cacheSchema:] + 455
12 ...apple.AddressBook.framework 0x94799281 -[ABAddressBook nts_InitDefaultContactManager] + 1438
13 ...apple.AddressBook.framework 0x94798c16 +[ABAddressBook nts_SharedAddressBook] + 70
14 ...apple.AddressBook.framework 0x94798b26 +[ABAddressBook nts_CreateSharedAddressBook] + 64
15 ...apple.AddressBook.framework 0x94798a79 +[ABAddressBook sharedAddressBook] + 72
16 com.apple.Safari 0x00094426 0x1000 + 603174
17 com.apple.Safari 0x00098836 0x1000 + 620598
18 com.apple.Safari 0x0009827a 0x1000 + 619130
19 com.apple.Safari 0x00095ee9 0x1000 + 610025
20 com.apple.Safari 0x00096103 0x1000 + 610563
21 com.apple.Safari 0x000282d6 0x1000 + 160470
22 com.apple.Foundation 0x9280b03b __NSFireDelayedPerform + 403
23 com.apple.CoreFoundation 0x9082d7e2 CFRunLoopRunSpecific + 3341
24 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
25 com.apple.HIToolbox 0x92ded8d8 RunCurrentEventLoopInMode + 285
26 com.apple.HIToolbox 0x92decfe2 ReceiveNextEventCommon + 385
27 com.apple.HIToolbox 0x92dece39 BlockUntilNextEventMatchingListInMode + 81
28 com.apple.AppKit 0x93273465 _DPSNextEvent + 572
29 com.apple.AppKit 0x93273056 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 137
30 com.apple.Safari 0x00006cea 0x1000 + 23786
31 com.apple.AppKit 0x9326cddb -[NSApplication run] + 512
32 com.apple.AppKit 0x93260d2f NSApplicationMain + 573
33 com.apple.Safari 0x0005f54a 0x1000 + 386378
34 com.apple.Safari 0x0005f471 0x1000 + 386161
Thread 1:
0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x9282ad3a -[NSRunLoop runMode:beforeDate:] + 182
4 com.apple.Foundation 0x9282ac36 -[NSRunLoop run] + 75
5 com.apple.WebKit 0x94d3cb89 +[WebFileDatabase _syncLoop:] + 198
6 com.apple.Foundation 0x927f52e0 forkThreadForFunction + 123
7 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 2 Crashed:
0 com.apple.CoreFoundation 0x908586f4 CFBagGetValues + 104
1 com.apple.CoreFoundation 0x90858582 CFBagCreateCopy + 143
Thread 3:
0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x92851bc2 +[NSURLCache _diskCacheSyncLoop:] + 206
4 com.apple.Foundation 0x927f52e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 4:
0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
1 com.apple.Foundation 0x9284b26c -[NSConditionLock lockWhenCondition:] + 39
2 com.apple.Syndication 0x99df8966 -[AsyncDB _run:] + 181
3 com.apple.Foundation 0x927f52e0 forkThreadForFunction + 123
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 5:
0 libSystem.B.dylib 0x9001a1cc select + 12
1 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 6:
0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
1 com.apple.Foundation 0x9284b26c -[NSConditionLock lockWhenCondition:] + 39
2 com.apple.AppKit 0x9334a270 -[NSUIHeartBeat _heartBeatThread:] + 377
3 com.apple.Foundation 0x927f52e0 forkThreadForFunction + 123
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 2 crashed with X86 Thread State (32-bit):
eax: 0x004be8f0 ebx: 0x9085869a ecx: 0x0ee8eba0 edx: 0x00000412
edi: 0x0ee81a5e esi: 0xb01a0000 ebp: 0xb019ef88 esp: 0xb019ef50
ss: 0x0000001f efl: 0x00010296 eip: 0x908586f4 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0xdbfff com.apple.Safari 2.0.4 (419.3) /Applications/Safari.app/Contents/MacOS/Safari
0xc9fe000 - 0xc9fffff com.apple.textencoding.unicode 2.1 /System/Library/TextEncodings/Unicode Encodings.bundle/Contents/MacOS/Unicode Encodings
0xd4f4000 - 0xda18fff com.macromedia.Flash Player.plugin 9.0.47.0 (1.0.4f41) /Users/swifty1013/Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90171fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c1000 - 0x901c3fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x901c5000 - 0x90202fff com.apple.CoreText 1.1.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90229000 - 0x902fffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x9031f000 - 0x90774fff com.apple.CoreGraphics 1.258.75 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x9080b000 - 0x908d3fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90911000 - 0x90911fff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x90913000 - 0x90a07fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a57000 - 0x90ad6fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aff000 - 0x90b63fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.8 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c66000 - 0x90c78fff libauto.dylib /usr/lib/libauto.dylib
0x90c7e000 - 0x90f24fff com.apple.CoreServices.CarbonCore 682.26 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90f67000 - 0x90fcffff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x91008000 - 0x91047fff com.apple.CFNetwork 129.21 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9105a000 - 0x9106afff com.apple.WebServices 1.1.3 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x91075000 - 0x910f4fff com.apple.SearchKit 1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x9112e000 - 0x9114cfff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x91158000 - 0x91166fff libz.1.dylib /usr/lib/libz.1.dylib
0x91169000 - 0x91308fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x91406000 - 0x9140efff com.apple.DiskArbitration 2.1.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x91415000 - 0x9141cfff libbsm.dylib /usr/lib/libbsm.dylib
0x91420000 - 0x91446fff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x91458000 - 0x914cefff com.apple.audio.CoreAudio 3.0.4 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x9151f000 - 0x9151ffff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x91521000 - 0x9154dfff com.apple.AE 314 (313) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91560000 - 0x91634fff com.apple.ColorSync 4.4.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x9166f000 - 0x916e2fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x91710000 - 0x917b9fff com.apple.QD 3.10.24 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x917df000 - 0x9182afff com.apple.HIServices 1.5.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x91849000 - 0x9185ffff com.apple.LangAnalysis 1.6.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x9186b000 - 0x91886fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x91891000 - 0x918cefff com.apple.LaunchServices 182 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x918e2000 - 0x918eefff com.apple.speech.synthesis.framework 3.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x918f5000 - 0x91935fff com.apple.ImageIO.framework 1.5.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91948000 - 0x919fafff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91a40000 - 0x91a56fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91a5b000 - 0x91a79fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91a7e000 - 0x91addfff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91aef000 - 0x91af3fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91af5000 - 0x91b7bfff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91b7f000 - 0x91bbcfff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91bc2000 - 0x91bdcfff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91be1000 - 0x91be3fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91be5000 - 0x91cc3fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x91ce0000 - 0x91ce0fff com.apple.Accelerate 1.3.1 (Accelerate 1.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91ce2000 - 0x91d70fff com.apple.vImage 2.5 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91d77000 - 0x91d77fff com.apple.Accelerate.vecLib 3.3.1 (vecLib 3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91d79000 - 0x91dd2fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x91ddb000 - 0x91dfffff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x91e07000 - 0x92210fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x9224a000 - 0x925fefff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x9262b000 - 0x92718fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x9271a000 - 0x92797fff com.apple.DesktopServices 1.3.6 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x927d8000 - 0x92a08fff com.apple.Foundation 6.4.8 (567.29) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92b22000 - 0x92b39fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92b44000 - 0x92b9cfff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92bb0000 - 0x92bb0fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92bb2000 - 0x92bc2fff com.apple.ImageCapture 3.0.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x92bd1000 - 0x92bd9fff com.apple.speech.recognition.framework 3.6 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x92bdf000 - 0x92be5fff com.apple.securityhi 2.0.1 (24742) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x92beb000 - 0x92c7cfff com.apple.ink.framework 101.2.1 (71) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x92c90000 - 0x92c94fff com.apple.help 1.0.3 (32.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x92c97000 - 0x92cb5fff com.apple.openscripting 1.2.5 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x92cc7000 - 0x92ccdfff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x92cd3000 - 0x92d36fff com.apple.htmlrendering 66.1 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x92d5d000 - 0x92d9efff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x92dc5000 - 0x92dd3fff com.apple.audio.SoundManager 3.9.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x92dda000 - 0x92ddffff com.apple.CommonPanels 1.2.3 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x92de4000 - 0x930d9fff com.apple.HIToolbox 1.4.9 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x931df000 - 0x931eafff com.apple.opengl 1.4.16 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x931ef000 - 0x9320afff com.apple.DirectoryService.Framework 3.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x9325a000 - 0x9325afff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9325c000 - 0x93912fff com.apple.AppKit 6.4.8 (824.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93c93000 - 0x93d0efff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x93d47000 - 0x93e01fff com.apple.audio.toolbox.AudioToolbox 1.4.5 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x93e44000 - 0x93e44fff com.apple.audio.units.AudioUnit 1.4.2 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x93e46000 - 0x94007fff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x9404d000 - 0x9408efff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x94096000 - 0x940d0fff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x940d5000 - 0x940ebfff com.apple.CoreVideo 1.4.1 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x94183000 - 0x941c1fff com.apple.vmutils 4.0.2 (93.1) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x94205000 - 0x94216fff com.apple.securityfoundation 2.2.1 (28150) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94224000 - 0x94262fff com.apple.securityinterface 2.2.1 (27695) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x9427e000 - 0x9428dfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x94294000 - 0x9429ffff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x942eb000 - 0x94305fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x9430b000 - 0x94614fff com.apple.QuickTime 7.2.0 /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x94797000 - 0x948ddfff com.apple.AddressBook.framework 4.0.5 (487) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x94969000 - 0x94978fff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x9497f000 - 0x949a8fff com.apple.LDAPFramework 1.4.2 (69.1.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x949ae000 - 0x949bdfff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
0x949c1000 - 0x949e6fff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x949f2000 - 0x94a0ffff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x94d3a000 - 0x94dcdfff com.apple.WebKit 419.3 /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x94e27000 - 0x94ea7fff com.apple.JavaScriptCore 418.6.1 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
0x94ee0000 - 0x951bffff com.apple.WebCore 418.23 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x9533e000 - 0x95361fff libxslt.1.dylib /usr/lib/libxslt.1.dylib
0x96f54000 - 0x96f68fff com.apple.audio.CoreAudioKit 1.0.1 /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit
0x99df6000 - 0x99e2dfff com.apple.Syndication 1.0.6 (54) /System/Library/PrivateFrameworks/Syndication.framework/Versions/A/Syndication
0x99e49000 - 0x99e5bfff com.apple.SyndicationUI 1.0.6 (54) /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
Model: iMac5,1, BootROM IM51.0090.B09, 2 processors, Intel Core 2 Duo, 2 GHz, 1 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 512 MB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 512 MB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.80.79.1)
Bluetooth: Version 1.9.0f8, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3160812AS Q, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-85J, 4.95 GB
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Photosmart 8200 series, HP, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA

I figured this one out myself. I removed the corrupt address book files. I cant beleive I spun my wheels for so long on that one.

Screen enhancement in ME51N - control is not passing to PBO and PAI of exit

HI ,
I am doing screen Exit for the Tcode : Me51N / Me52N.
I have to add 3 Text fields in item level, i am using Enhancement:MEREQ001(in CMOD).
Initially i added those 3 fields in Structure CI_EBANDB.
Then i designed Screen in Screen Exit:SAPLMEGUI Screen Num:111.
Here in the PBO and PAI Module
MODULE STATUS_0111 , MODULE USER_COMMAND_0111.
the control is not going , i tried with break-point inside these modules.
But while executing ME51N , debugger is not working.
Code i wrote in both PAI and PBO
MODULE STATUS_0111 and MODULE USER_COMMAND_0111.
loop AT SCREEN.
       screen-output = '1'.
       screen-input = '0'.
       MODIFY SCREEN.
endloop.
I need to display the three screen in Display format not in editable format.
Thanks and Regards,
Prakash K

Hi
You need to write the code in PBO of that screen based on TRANSACTION TYPE.
there is a method call 'get_transaction_state' from this you will get the transaction type (H - create , 'V'- change 'B' -display) at run time.
If run time transaction type = B
LOOP AT screen.
      IF screen-name eq c_name . "field names
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
endif.

Module Programming PBO and PAI flow.

Hi,
I am new to module programming,
My req are - I have 4 input fields and button in my first screen(1000)
After user enters these values then I have to validate this values in the database and then
I need to update 1 field value in the database. After updating I need to display the results in second screen (2000).
Can any one please let me know what is the process in PBO and PAI modules.
How to write code .
1.     where to validate field values
2.     where to write code for updating database.
3.     where to write code for displaying success/failure message in second screen(2000)
4.     where to write declarations.
Thanks a lot for ur time .
I highly appreciate ur help.
Venkat.

Hello
Check this out:
                            INCLUDES                                 *
INCLUDE ZIMMFORM001_TOP.
INCLUDE ZIMMFORM001_PBO.
INCLUDE ZIMMFORM001_PAI.
Main Process
START-OF-SELECTION.
CALL SCREEN 100. -> double click
END-OF-SELECTION.
Uncomment the following:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.   -> double click
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100. -> double click
*& Include           ZIMMFORM001_TOP
Global Definitions                                   *
"Your definitions
*& Include           ZIMMFORM005_PBO
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MEN'. -> double click -> CREATE SCREEN STATUS 'EXE' AND 'BACK'
SET TITLEBAR 'ZTIT'. -> double click
INITIATE WHATEVER YOU NEED
ENDMODULE.                 " STATUS_0100 OUTPUT
*& Include           ZIMMFORM001_PAI
*&      Module USER_COMMAND_0100 INPUT
      text
INSIDE THE CASE YOU CAN VALIDATE.WHEN 'EXE' IS SELECTED FOR EXAMPLE.
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXE'.
      PERFORM validate_form.
      PERFORM save_form_to_db.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Hope this helps, dont forget to reward
GABRIEL
Message was edited by:
        Gabriel Fernando Pulido V.

Plz help me to find out tables and fields........based on SD,PM,FICO Module

Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description          SAP-Term                                       Explaination
1.Salesman        Equipment AC Mgr.                          VBPA2 this is the salesman code - I need the
description for this.
2.Vendor              MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
                                                                                structure from me23n in item data-account
                                                                                assignment-sales order. The number here should
                                                                                be the corresponding contract number. This field
                                                                                should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period   Val. Period Category                           Val. Period Category from va41 header-contract
    Category                                                               data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/    CAUFVD-GSTRP/                         This should be the document date where by it is in
    Purchase Order      MEPO_TOPLINE-BEDAT          between the range the user input
    Document Date
5. B2B Vendor      MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
                                                                                me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost         MEPO1211-NETPR                       This cost is pulled from PO (me23n) however take
                                                                                note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
                                                                              NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults                                                          The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed                                                This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault   AFVGD-ISMNW                   This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost         RIHAUFK_LIST- DGESKOSIST   This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours      AFVGD-ISMNW                            This field is in IW41 in confirmation base on the
                                                                             order created. This field will be the actual time
                                                                             spent. This will correspond to the Faults Completed
                                                                             This means only orders with system
                                                                             status TECO will be pull. Take note service only
                                                                             take order type RD08.
12. Spare Cost   Spare part cost                              This field will be in IW33 under cost tab, and cost
                         PMCOEA-IKOSTENKGR                tab in item level. This will be the actual cost of spare
                                                                             part after TECO. This will include all order type.
13. Credit Note   Credit Memo                                 The programs need to pull out credit memo which is
                                                                             reference from the contract. If there is a credit memo
                                                                             reference from the contract then the value will be net
                                                                             price per equipment.

Can u tell me purpose of this spec ?
Regards,
pandu.

Phtmlb: space between Label and Field

Hello,
I am using <phtmlb:matrix> to arrange the fields next to one another on the view. For fields, <phtmlb:formLayoutInputField> is used in which case the label is taken automatically through binding to DDIC fields. At one particular row of matrix, it is required to break-up the cell in 3 more cells, so that I can display 3 fields adjacent to one another in the space of one cell. For this I am nesting one more matrix inside the outer matrix.
Something like this...
<phtmlb:matrix>
<phtmlb:matrixCell row = "1"
col = "1" />
<phtmlb:formLayout>
<phtmlb:formLayoutInputField>
</phtmlb:formLayout>
<phtmlb:matrixCell row = "2"
col = "1" />
<phtmlb:matrix>
<phtmlb:formLayout>
...3 fields next to one another / 3 cells
</phtmlb:formLayout>
</phtmlb:matrix>
</phtmlb:matrix>
I am able to acheive the desired output of 3 fields next to one another, but facing the following problem.
To get the inner matrix(3 fields) into effect, i need to close the <phtmlb:formLayout>.
Now, the first row properly shows all the filds one below the other with proper spacing between the label and input output field.
(Actually all the input_output fileds are placed at a distance of largest text/label in one formlayout).
But when the second row starts, the spacing between label and field is no longer taken as per the first row in above case.
Is it because since a new <phtmlb:fomlayout> is started , the spacing will be as per the elements in this new formlyout. If yes, How can I assure the same spacing between elements of two different formlayouts. I tried "fieldToLabelFactor" but since no. of fields in my page is too large, I can't afford to decide this factor for every <phtmlb:formLayout>.
Or is there any better way to acheive the required output.
Thanks ,
Priti

did u get the solution?

Table and field for the given object

Hi all,
We are developing a report , i need following table and fields. Could you please help me on this?
Supplier
No of approval required
Approval status
Approval pending with
In approval since
Thanks in advance , will appriciate any input
Hareesha

Hi ,
Still am not able to find out the FM/ table whom its pending for approval (shopping cart). Could you please help me on this?
(E.g: Shopping cart got created and having 7 levels of approval (Manager1, 2, 3,4,5,6 and 7),let us say First 2 manageru2019s approved, 3rd manager has to approve the Shopping cart, we need to pull these information of pending with 3rd manager in our Z-report )
Thanks in advance
Harish

Reqired Table and Fields of Debitor Analysis

Hi All,
     this is srikanth, am new for coding.
i am at client place, i dont have functional support, i need to develop a REPORT for Debitor Analysis so i required the tables used and field names of
input:
1) Customer Range,
2) Date Range.
output:
1)   Customer
2)   Total Outstanding Receible
3)   Outstanding amount in days. i.e ( 0- 30, 30-60, 60-90, 90-120, >120 Days) .
please Help me.
Thanks in advance.
Regards,
Srikanth.

Hi,
Use Tables:-tables : bkpf, bsid, kna1, knvv, t001w, bseg, bsad.
Regards,
Prakash

How to take input in one frame and display it in other frame of same page?

I need to take input (text) for the comment field in one of the frames and when submit button is pressed it should be displayed in the other frame on the same page.
I am able to get the input from the user but its not reflected in the other frame which basically is a table...............so let me know if you guys have any suggestions
I used following code
<form name="input" action="<%= base_url %>/index.jsp?yr=<%= y %>&mon=<%= m %>&day=<%= d %>" method="post">
Comment:
<input type="text" name="comment" size="20"/>

The trick is to define paintComponent to all applicable panels and pass the Graphics parameter to a separate method which does the drawing for you.
class Component1 extends JPanel
   //blah blah blah - put your code here
   public void paintComponent(Graphics g)
      //insert setup functions here
      paintStuff(g);
   //more arbitary code
   public void paintStuff(Graphics g)
      //do your drawing here
}And you would usually want to separate your UI components from the drawing so it doesn't intefere with the client's perception of the program. In other words, don't draw on the content pane, draw on a custom panel and add it to an appropriate part of the content pane.
Stephen

Input with sql*plus and Output it with PL/SQL

Hi everyone,
I try to understand how can I get input and input by using sqlplus and plsql together. I get output like this:
Get User Input
Given Name: Iron
Family Name: Man
old   6:        Given_Name := '&GivenName';
new   6:        Given_Name := 'Iron';
old   7:        Family_Name := '&FamilyName';
new   7:        Family_Name := 'Man';
Given Name: Iron
Family Name: Man
PL/SQL procedure successfully completed.My Codes:
PROMPT Get User Input
ACCEPT GivenName PROMPT "Given Name: "
ACCEPT FamilyName PROMPT "Family Name: "
DECLARE
     Family_Name Varchar(15);
     Given_Name Varchar(15);
BEGIN
     Given_Name := '&GivenName';
     Family_Name := '&FamilyName';
     DBMS_OUTPUT.PUT_LINE('Given Name: ' || Given_Name);
     DBMS_OUTPUT.PUT_LINE('Family Name: ' || Family_Name);
END;
/My question is why I get
old   6:        Given_Name := '&GivenName';
new   6:        Given_Name := 'Iron';
old   7:        Family_Name := '&FamilyName';
new   7:        Family_Name := 'Man';this bit?Is there something wrong in my code? Thanks.

Hi,
From SQL*Plus reference:
After you enter a value at the prompt, SQL*Plus lists the line containing the substitution variable twice: once before substituting the value you enter and once after substitution. You can suppress this listing by setting the SET command variable VERIFY to OFF.
So. you can remove current output with
SET VERIFY OFF
and enable your PL/SQL output by
SET SERVEROUTPUT ON
Regards
Peter

Process PBO and PAI when Enter key is pressed

Hello everyone,
I am making a program where there is a I/O Box component. When the user enters data in this field and hits the 'ENTER' key I want to process the PBO and the PAI of that screen.
The problem is what should i assign in the ok_code for this?
Please advise.
Thanks in advance,
Karan

>
Karan Kappal wrote:
> Hello everyone,
> I am making a program where there is a I/O Box component. When the user enters data in this field and hits the 'ENTER' key I want to process the PBO and the PAI of that screen.
> The problem is what should i assign in the ok_code for this?
>
> Please advise.
>
> Thanks in advance,
> Karan
You want to Go when user Press enter.
In PBO we will set the status,
SET PF-STATUS 'STATUS'. " double click on it or Go to SE41
here activate the Function code for the ENTER button.
in the FUnction keys you can see in the Beginning First Function (Green Tick mark) Give the Function code say ENTER , and give all necessary details and Activate .
Now Test your application.
When your enter the data and press enter, First it Goes to PAI
here you do what ever required based on the action code...
in PAI
case ok_code.
when 'ENTER'.
"your code here...
endcase.
and once it is done, Control backs to PBO ..

Screen exit for co11n and problems in writting the PBO and PAI Logic ?

Hi People,
I am developing a screen exit for transaction co11n. I have found the exit ( CONFPP07 ) ... I created a project and have
assigned this exit and activated the project. I have created a field named SHIFT on clicking this field i have to give three
possible values (a,b,c ) and i have to store these values in some table .......... now my problem is in which include i
have to write PBO and PAI logic ... should i have to write pbo logic in the include provided in the exit
EXIT_SAPLCORU_S_100 and PAI in EXIT_SAPLCORU_S_101.......or .........Can any tel me what should i have to do to
meet the requirements... and in which structure i have to add this field so that it gets stored in some table.
Thanks in Advance.

Hi,
Use the includes in the program SAPLXCOF given in CONFPP07 Exit.
You may use include zxcofzzz ( for Subprograms and Modules )
by creating it upon double click.
Regards,
Wajid Hussain P.

Sample code in PBO and PAI

Hi all,
i created a new field in the customer master (xd03) screen with a button. if i click that button, it will display the next screen with the new field. now i need to write the code in PBO and PAI events in that screen to get the data from table and to change the already exiting data.
can any body provide me the sample code wht to write in the PBO and PAI eventts.?
thanks in advance.
kp

Hi,
I think you find the answer but i still answered your question.
You can use the function module 'DYNP_VALUES_READ' to read value you want and use the function module ' HELP_VALUES_GET_WITH_TABLE' to get the values from kna1 table.
Good luck.

Documentation about Screen, Menu and Field Exits

Hi all!!
I need some documentation about Screen, Menu and Field Exits.
I´m very interested specially on steps by steps.
My mail is [email protected]
Helpful posts will be rewarded.
Thanks in advance and regards,
Manuel.

<b>Types of Exits </b>
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
<b>Menu Exits</b>
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
<b>Screen Exits</b>
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
<b>Function Module Exits </b>
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
    CASE okcode.
        WHEN 'BACK OR EXIT'.
            CASE sy-dynnr.
                    WHEN '100'.
                         SET SCREEN 0.
                         LEAVE SCREEN.
                    WHEN '200'.
**** Note that you can write any code that satisfy your needs.                                                     ****
**** But in this case, this was wrote as a sample code for reference sake.                                    ****
**** And you can test it.                                                                                ****
                         SET SCREEN 100.
                         LEAVE SCREEN.
             ENDCASE.
      ENDCASE.
reward points if it is usefull..
Girish

Input = 0 in PBO and Field command in PAI

Similar Messages

Maybe you are looking for