Input does not work when not focusing the desired track
Hello
Sitting and working on a track here pretty much for the first time in logic X. I work with much outboard gear so I always send channels out and back into an input.
The input channel which comes from the outboard gear now gets muted if I do not focus the track in the mixer or the working area, and yes the input is marked on.
Anyone know anything about this?
Cheers
You need to make sure that it also returns true during the apply request values phase of the next request and thus not only during the render response phase of the initial request.
Similar Messages
-
my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution
restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired
-
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid -
i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....
If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon. -
HT4993 why does my internet not work when not connected to wifi?
why does my internet not work when not connected to wifi
Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari -
Flash catalyst cs5.5 not working when i run the project
when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.
Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid -
the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.
Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV -
The phone is not stolen but it does not work out side of the house
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
My itouch is not working when i touch the screen nothing happens it does not respond
my ipod does not respond when i try to slide to unlock it does nothing like if the thouch part does not work y is this happening?????
Try resetting it:
http://support.apple.com/kb/HT1430
Hope that helps. -
Why table getWidth and setWidth is not working when resize column the table
hi all,
i want to know why the setWidth is not working in the following code,
try to uncomment the code in columnMarginChanged method and run it wont resize the table.
i cont set width(using setWidth) of the other table column using getWidth of the main table column.
and i want to resize the right side columns only (you can check when you resize the any column the left and right side columns also resizing)
any suggestions could be helpful.
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.TableColumnModelEvent;
import javax.swing.event.TableColumnModelListener;
import javax.swing.table.TableColumnModel;
public class SynTableResize extends JFrame implements TableColumnModelListener, ActionListener
JTable table1 = new JTable(5, 5);
JTable table2 = new JTable(5, 5);
JTable table3 = new JTable(5, 5);
JButton btn = new JButton("refresh");
JPanel pnlcontainer = new JPanel();
public SynTableResize()
setLayout(new BorderLayout());
pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
pnlcontainer.add(table1.getTableHeader());
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table2);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table3);
table2.setTableHeader(null);
table3.setTableHeader(null);
table1.getColumnModel().addColumnModelListener(this);
table3.setColumnModel(table1.getColumnModel());
table2.setColumnModel(table1.getColumnModel());
table2.getColumnModel().addColumnModelListener(table1);
table3.getColumnModel().addColumnModelListener(table1);
btn.addActionListener(this);
getContentPane().add(pnlcontainer, BorderLayout.CENTER);
getContentPane().add(btn, BorderLayout.SOUTH);
setSize(new Dimension(400, 400));
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public static void main(String[] args)
new SynTableResize();
public void columnAdded(TableColumnModelEvent e)
public void columnMarginChanged(ChangeEvent e)
TableColumnModel tcm = table1.getColumnModel();
int columns = tcm.getColumnCount();
for (int i = 0; i < columns; i++)
table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
// the following commented code wont work.
// table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
// table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
// table2.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
// table3.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
SwingUtilities.invokeLater(new Runnable()
public void run()
table2.revalidate();
table3.revalidate();
public void columnMoved(TableColumnModelEvent e)
public void columnRemoved(TableColumnModelEvent e)
public void columnSelectionChanged(ListSelectionEvent e)
public void actionPerformed(ActionEvent e)
JTable table = new JTable(5, 5);
table.setColumnModel(table1.getColumnModel());
table.getColumnModel().addColumnModelListener(table1);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(table);
pnlcontainer.validate();
pnlcontainer.repaint();
}thanks
dayananda b vhi,
thanks for your replay,
yes i know that, you can check the following code it works fine.
actually what i want is, when i resize table column it shold not automaticaly reszie when table resized and i dont want horizontal scroll bar, meaning that all table columns should resize with in the table size(say width 300)
if i make table autoresize off than horizontal scroll bar will appear and the other columns moved and i want scroll to view other columns.
please suggest me some way doing it, i tried with doLayout() no help,
doLayout() method only can be used when table resizes. first off all i want to restrict table resizing with in the limited size
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.ChangeEvent;
import javax.swing.table.TableColumnModel;
public class TempSycnTable extends JFrame
JTable table1 = new JTable(5, 5);
MyTable table2 = new MyTable(5, 5);
MyTable table3 = new MyTable(5, 5);
JPanel pnlcontainer = new JPanel();
public TempSycnTable()
JScrollPane src2 = new JScrollPane(table2);
JScrollPane src3 = new JScrollPane(table3);
// table1.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// table2.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// table3.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// src2.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
// src3.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
table2.setTableHeader(null);
table3.setTableHeader(null);
table3.setColumnModel(table1.getColumnModel());
table2.setColumnModel(table1.getColumnModel());
table2.getColumnModel().addColumnModelListener(table1);
table3.getColumnModel().addColumnModelListener(table1);
table2.setTableHeader(null);
table3.setTableHeader(null);
setLayout(new BorderLayout());
pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
pnlcontainer.add(table1.getTableHeader());
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(src2);
pnlcontainer.add(Box.createVerticalStrut(5));
pnlcontainer.add(src3);
getContentPane().add(pnlcontainer, BorderLayout.CENTER);
setSize(new Dimension(300, 300));
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public static void main(String[] args)
new TempSycnTable();
class MyTable extends JTable
public MyTable()
super();
public MyTable(int numRows, int numColumns)
super(numRows, numColumns);
public void columnMarginChanged(ChangeEvent event)
final TableColumnModel eventModel = table1.getColumnModel();
final TableColumnModel thisModel = getColumnModel();
final int columnCount = eventModel.getColumnCount();
for (int i = 0; i < columnCount; i++)
thisModel.getColumn(i).setWidth(eventModel.getColumn(i).getWidth());
repaint();
}thanks
daya -
My camera will not work when I open the app the screen is blank
When I turn on the camera app the screen is blank, any suggestions
Try closing the Camera app completely and see if the camera works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How does monitor work when you close the laptop
can the monitor still work if you close the laptop? if not, how can i turn off the picture on the laptop screen as i don't want to see both screens?
That setting is always on if you are using an USB mouse; to do it with a Bluetooth device, follow the instructions in this article.
(19623) -
N97 camera does not work when i open the len cover
I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.
it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
but I don't need to reset the phone, just close and open the len cover again, and it works.
Message Edited by walkmancat on 05-Jul-2009 05:52 PM -
Why spark videodisplay control does not work when i run the application?
Even in the mode design I can not see the video, thks.....
@Jorge,
Try using file:/// instead of file:/.
This seems to work for me:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<s:VideoDisplay x="159" y="96"
source="file:///C:/Documents and Settings/pdehaan/My Documents/My Videos/walking.flv"
loop="true"
width="384" height="267"/>
</s:Application>
But I'd probably recommend copying the .FLV file into your Builder project or putting it online instead of trying to play it back from a hardcoded file:/// path.
Peter -
when connecting the iphone to the pc to upgrade my OS itunes says "the iphone cannot be used because the Apple Mobile Device is not started" can someone help me please
http://support.apple.com/kb/ts1567
Maybe you are looking for
-
I downloaded the new adobe flash player for my computer but whenever i go on games it says not found
i downloaded the new adobe flah player but whenever i go on games it says adobe flash player not found. so can i have help please?
-
Illustrator CS6 jpeg file saved looks distorted when uploaded onto internet
I am helping a pal of mine on illustrator and I have little knowledge so Im asking here. They made a simple type and shape design with a solid backdrop. When I tried to export via save for web to jpeg with high settings, it came up online with subtl
-
I was recently delighted to find out about the Orange FilmToGo initiative. How great to be able to rent a film for 30days for the cost of 35p and to be offered a different film each week. So I duly ordered 3 films between 11th August and 8th Septembe
-
HT4623 When is the iOS 7 update going to be released?
Wanted to know when in the new ios7 going to be released for iPhone.
-
Nokia 5230 Software Update!
Hi, My name is Amos and i live in South Africa. I read on Nokia FeedBurner that a new 50.x.x.x is available but when i check on my phone none is available. Please help i need to update the current software. Thanx inadvance, Amos.