Input element in web dynpro java not working

Hi,
Iam new to webdynpro java. iam trying on external context mapping example from sap help.when i run the application i have assigned a context to a input element that should be accessed by another other component's window view .when i follow steps given in diagram for external context mapping when i run the application i am not able to enter the data into the input textbox.it became read only.plz suggest me a good example for external context mapping and some times i am not able to enter a value for input field when i assign a context attribute to it.i have assigned a node context to the input element.
Thanks and regards
prasad

Hi Prasad,
An externally mapped node always exists within the context of a component interface controller and have its isInputElement property set to true.
External context mapping is possible only for independent nodes of a component interface controller not independent attributes.
Also, for external context mapping, look at below thread -
external context mapping
Regards,
Sen

Similar Messages

InteractiveForm UI Element in Web Dynpro Java - Image not displayed on form

Hello Experts,
Using: NetWeaver Developer Studio 7.0.1_06; Adobe Livecycle Designer 8.1.
I have an image "image.png" in my src/mimes/components/com.mm.InteractiveFormComp folder within my web dynpro java project.
I load the image into my context in wdDoInit method in the comp controller:
wdContext.currentContextElement().setImage("image.png");
In the interactiveform I have an ImageField on the form and have set its properties as follows:
Field - URL = http:[host]:[port]/webdynpro/dispatcher/InteractiveFormComp/src/mimes/components/com.mm.InteractiveFormComp/image.png
Field - Embed Image Data = "checked"
Binding - Default Binding = Image
However, no image ever shows up on the form. I have also been through many threads in the forums but havent found a solution. Can anyone please assist me?
Regards,
MM.

Hello,
I tried using jpg and bmp. Didn't work.
Any other suggestions?
Regards,
MM
Solved it!
Edited by: Marshall Mathers on Mar 9, 2011 9:53 PM

Error Input table in web dynpro java

Hi expert
I'm trying to create a service order via web dynpro java, but i can't use the input parameter of type table;
With this implementation of the method init of the custom controller ,on the table i can insert only an element, because the table have only a row.    wdContext.nodeIt_Input_Items().size() = 1
public void wdDoInit()
    //@@begin wdDoInit()
     Crm_Wap_Order_Create_Input input = new Crm_Wap_Order_Create_Input();
          wdContext.nodeNode_custom_controller().bind(input);
     Crm_Wap_Input_Items table = new Crm_Wap_Input_Items();
               wdContext.nodeIt_Input_Items().bind(table);
          input.setIv_Bp(input.getIv_Bp());
               input.setIv_Currency(input.getIv_Currency());
               input.setIv_Description(input.getIv_Description());
               input.setIv_Offline_Luid_Order(input.getIv_Offline_Luid_Order());
               input.setIv_Ord_Delivery_Date(input.getIv_Ord_Delivery_Date());
               input.setIv_Order_Guid(input.getIv_Order_Guid());
               input.setIv_Pers_Resp(input.getIv_Pers_Resp());
               input.setIv_Po_Number_Sold(input.getIv_Po_Number_Sold());
               input.setIv_Proc(input.getIv_Proc());
               input.setIv_Save(input.getIv_Save());
               input.setIv_Selected_Prod(input.getIv_Selected_Prod());
               input.setIv_Ship_To(input.getIv_Ship_To());
          for(int i=0;i<wdContext.nodeIt_Input_Items().size(); i++) {
               table.setOrder_Qty(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getOrder_Qty());
               table.setProd(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getProd());
               table.setDelivery_Date(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getDelivery_Date());
               table.setSequence(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getSequence());
               table.setUom(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getUom());
               table.setLine_Guid(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getLine_Guid());
               if(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getProd()!= null)
                input.addIt_Input_Items(table);
    //@@end
I've tried, with a button, to insert more row, and i do that, but the additionals rows are not passed to the function, but only the row created with the method wdDoInit();
How can i bind the additional row at the context??
Somebody know a tutorial for create an order via web dynpro java??
Please Help me
Best regards
Marco

hi Bhargava
sorry for the late..
no in the init method i do the binding of the parametere, because if i'dont it in the init mothod the parameters are not editable..
Link:[http://img29.imageshack.us/i/56a7250185252a1d06af141.png/]
in me button metho i execute the BAPI....
public void wdDoInit()
    //@@begin wdDoInit()
     Crm_Wap_Order_Create_Input input = new Crm_Wap_Order_Create_Input();
    wdContext.nodeNode_custom_controller().bind(input);
         //input.setIt_Input_Items(new AbstractList());
     Crm_Wap_Input_Items table = new Crm_Wap_Input_Items();
     wdContext.nodeIt_Input_Items().bind(table);
          input.setIv_Bp(input.getIv_Bp());
               input.setIv_Currency(input.getIv_Currency());
               input.setIv_Description(input.getIv_Description());
               input.setIv_Offline_Luid_Order(input.getIv_Offline_Luid_Order());
               input.setIv_Ord_Delivery_Date(input.getIv_Ord_Delivery_Date());
               input.setIv_Order_Guid(input.getIv_Order_Guid());
               input.setIv_Pers_Resp(input.getIv_Pers_Resp());
               input.setIv_Po_Number_Sold(input.getIv_Po_Number_Sold());
               input.setIv_Proc(input.getIv_Proc());
               input.setIv_Save(input.getIv_Save());
               input.setIv_Selected_Prod(input.getIv_Selected_Prod());
               input.setIv_Ship_To(input.getIv_Ship_To());
          for(int i=0;i<wdContext.nodeIt_Input_Items().size(); i++) {
               //wdContext.nodeIt_Input_Items().ge
               table.setOrder_Qty(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getOrder_Qty());
               table.setProd(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getProd());
               table.setDelivery_Date(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getDelivery_Date());
               table.setSequence(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getSequence());
               table.setUom(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getUom());
               table.setLine_Guid(wdContext.nodeIt_Input_Items().getIt_Input_ItemsElementAt(i).getLine_Guid());
               input.addIt_Input_Items(table);
    //@@end
this is the init...
in the button method
public void CreateOrder( )
    //@@begin CreateOrder()
     try
          wdContext.currentNode_custom_controllerElement().modelObject().execute();
          wdContext.nodeOutput().invalidate();
          catch (Exception ex)
           ex.printStackTrace();
    //@@end

Submit Button In Web Dynpro Layout not working.

Hi All,
         I have integrated an adobe form in my web dynpro application.According to my requirement the view of screen should change when the user clicks on submit button.So I have given the submit button as one of the UI element in my WD object along with the form.But when I click on the submit button the functionality doesnot work.
The same submit button works when there is no adobe form integrated in my WD application.
Please let me know what needs tyo be done so make that submit button work.
Thanks and Regards,
Sarang

Sarang,
Lets go step-by-step.
1. Create two views in your applications lets say the names are View1 and View2.
2. Goto Diagram View of the Window in under Windows node in your Web Dynpro Explorer in NWDS.
3. Create Inbound and Outbound plugs for View1 namely inbView1 and outView1
4. Repeat the same for View2. So names will be inbView2 and outView2.
5. Create a navigational link between the Vies by creating a link from outView1 plug to inView2 plug.
6. Goto Layout tab for the View1. This is where you have embedded the Interactive form element.
7. Set the displayType property to native.
8. Under Events there will be onSubmit method, craete a new method called navigateToView2 and click Go. This will take you where you can implement your logic.
9. Fire the outbound plug of View1. See following code snippet:-
public void onActiong navigateToView2(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiongotoView2(ServerEvent)
    wdThis.wdFirePlugOutView1();
    //@@end
10. Edit the Interactive form, it should open Adove LiveCycle Designer.
11. Drag-drop Submit button from WD Native library ontot the form.
11. Don't modify anything and check if you see below code snippet in the Editor.
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 705.20051114114126.253659.250577 - SubmitToSAP.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
12. Now whenever you click submit button on the form, what it does is that it makes call to WD framework and the onSubmit action handler is called where you have written the code to navigate to View2.
Chintan

After applying SP21 the web dynpro is not working (WDTypeNotFoundException)

Hi
We have recently applied SP21 to our NW04 system.
The patch was successfully applied. But while accessing the Web Dynpro, we are getting WDTypeNotFoundException exception.
The Error Message is as follows :
+500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type jp.co.companyname.projectname.pp.fnp09.datapreparemodel.types.Ru_cnfind not found
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:224)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:517)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:530)
at jp.co.companyname.projectname.pp.fnp09.main.RawMaterialView.wdDoModifyView(RawMaterialView.java:191)
... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4021.00.0000.20070905102710.0000 (release=630_VAL_REL, buildtime=2007-09-19:20:40:15UTC, changelist=460812, host=PWDFM026)
J2EE Engine 6.40 patchlevel 109749.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale ja
Time of Failure Mon May 17 18:35:52 JST 2007 (Java Time: 1197884152810)
Web Dynpro Code Generation Infos
companyname.co.jp/pp~fnp09
SapDictionaryGenerationCore 6.4010.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-12-09:22:23:41UTC, changelist=280522, host=PWDFM026.wdf.sap.corp) +
If you have any ideas please let me know.
thanks and Regards
Raghunahth L

Hi raghu,
You can go to Visual administrator (/usr/sap/<SID>/JCxx/j2ee/admin--go.bat)
Give administrator credentials..
Cluster-Server-Services-webdynpro Runtime.
See if it is stopped.You can see red croos,if it is stopped.If it is,
Right click on Webdynpro Runtine and start.
One more option,you can give a try is start all teh srvices manually through
telnet
This can be done with "run' command on you system
telnet <IP adress> telnet port
telnet port will be http port ending with 8.
then give administrtaor credentials.
then go with these commands,
jump 0
add deploy
list_app
start_app-all
Try looki in for detailed error messages in default trace and application logs.
Loc : /usr/sap/<SID>/JCxx/j2ee/cluster/server0/log
Regards
Usha

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Web Dynpro applications not working on ECC 6.0 IDES

Hi,
I'm new to Web Dynpro and developed a custom Web Dynpro (including the application) on a ECC 6.0 IDES system. It's simple with a couple of input fields. When I test it (either via SAP GUI 7.1 or 7.2, or Web GUI), it appears on the browser ok but the screen is frozen. I can't enter anything into the fields, etc. I also tested SAP Web Dynpro applications and they act the same way, frozen screen. There aren't any errors displayed or any runtime errors in ST22. Please advise. I searched this forum but didn't see any issue similar to mine. The IDES vendor suggested I post the issue on SDN.
John

I guess it has do to with some sort of browser's font size or view settings.
press ctrl +0 make the zoom 100% and font size medium and try again.
thanks
sarbjeet singh

Web dynpro URL not working in user's UWL

Hi,
I am not sure if this is the right place for this question. I have created a web dynpro application and copied the URL and we put this URL in the UWL of a user using workflow, now the issue is when a user click on that URL on the portal side it's not doing anything but when I go r/3 side and click on the URL in my inbox I can see my web dynpro application running.
Any idea why is this happening.
Thanks,
Raj

Hi,
Have you checked the proxy settings in server? If yes use this code
URL u = new URL("http://download.finance.yahoo.com/d/quotes.rss?s=gm&d=t&f=l1t1c1");
System.getProperties().put("proxySet", "true");
System.getProperties().put("proxyHost", <HTTP Proxy Host> );
System.getProperties().put("proxyPort", <HTTP Proxy Port> );
InputStream is = u.openStream();
DataInputStream dis = new DataInputStream(new BufferedInputStream(is));
You can check the proxy settings in System Administration - >System Configuration -> Service Configuration -> Applciations ->com.sap.portal.ivs.httpservice -> Services -proxy.
Regards
Suresh Bachimanchi

Trigerring BPM from Web Dynpro screen not working

Hi Guys,
I am trying to trigger a BPM process from a Web Dynpro screen so I created a BPM process and created a WSDL and consuming the WSDL in the Web Dynpro app but getting an exception "Exception on creation of service metadata for web service mass config parameters service reference ID '28af57ab-9212-4ffd-90c6-0779c78a8da3' and application name 'demo.sap.com/testwd'. Check mass configuration has been done properly."
Please assist with what I am missing.
Thanks,
-Ash

I ran into the same error when attempting to consume a Process as a web service from my Web Dynpro component. I found that it is actually succeeding in kicking off my process, but it looks like it fails from my calling component. It seems to be related to calling a service meant to be asynchronous as a synchronous service. In my case, it throws a SOAP fault "com.sap.engine.services.webservices.jaxrpc.exceptions.SOAPFaultException: Process start has been triggered" when I run it from the WS Navigator manually. It turns out that the same error is getting wrapped by the exception you were experiencing. Try using the getCause method to see if the same is true for you. This environment is still new to me so I don't have good solution on how to make it not throw that error in the first place.
[addendum] I ran across [this|Start BPM Process Trigger - Read timed out] thread that explains exactly what I had guessed. You can remove the response part of your WSDL and it will get called successfully in an asynchronous manor. Note that you must manually remove some of the entries in the WSDL since the visual editor with the 7.1 environment doesn't clean up after itself as well as it should.
Edited by: Joseph Robertson on Jan 12, 2011 11:04 PM

SAP Web Dynpro iView not working!

We are trying to run BI reports based on Web Dynpro ABAP in portal. I created a SAP Web Dynpro iView with following parameters
System : SAP_LocalSystem
Namespace : sap
Applicatioin Name : ZXXXXX_RRE (This is the template name)
When I try to preview the report I get portal runtime error with following error dump in log file
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template
'<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
I have checked SAP_BW system object and tested the connections all connection test for SAP_BW is successful. BI Portal system is set up with SAP web dispatcher, ITS and WEB host names in system object are configured something like xxxx.hostname.com:443 since it's SSL.
Am I missing anything here?
Thanks
Praveen

Hello Pravin,
Currently i am also facing the same error. I am having set of Webdynpro-ABAP applications, and accessing from Portal.
I tested respective applications from SE80, all are working fine.But while accessing from Portal its giving Portal runtime error-Unable to parse etc....
I checked my system object.. both WAS and ITS connections are successful.but i mentioned its related to ITS, where can i test my ITS further level..
Though these are WDA applications , how these related to ITS..
I am also getting same error message.. Please suggest how can i go head
Thanks in Advance
Ganesh

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

Creating sales order using web dynpro JAVA

Hello everyone,
i am new to web dynpro. Can any one tell me how to creating sales order by web dynpro JAVA using BAPI.
Thanks.
Vinita Sharma

Hi...
you can use Adaptive RFC methodology in web dynpro java to work with BAPIs..... these are standard bapi's provided
Here are required Bapis... select which one you want....
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
check this thread SALES ORDER creation using BAPI
sample java program which will call SAP bapi function sales order create
PradeeP

Deploying web dynpro java application successfully but not working

Hi all,
I have a web dynpro java application. When I deployed in my local portal (7.10 SP6) it is working fine. But when I deployed in another portal (7.10 SP2) it is not working totally. In system default trace I saw below exception:
Failed to create deployable object 'sap.com/a1sbicbc~unv' since it is not a Web Dynpro object.
It seems that the web dynpro application was not deployed anymore, but in deployment UI I can see the package was deployed without any errors.
In this situation, is there any other portal/java engine configuration which may prevent the web dynpro application being deployed? For example deployment or security policy, etc?
Looking forward for replies.
B.R.

Hi,
Try to undeploy the application from the server
Then deploy it
Regards
Ayyapparaj

Date Column not getting sorted in a table in web Dynpro Java

Hi All,
I am facing an issue while sorting the date column in a table in my web dynpro java application.
When the date is displayed in the sql format in tha table, I am able to sort the date column successfully but when we convert the date field from sql format to util format in our table and then sort it does not work.
Kindly let us know the steps to be followed in this case to sort the date column of a table in Simple Date format as we do not want date in the sql format to be displayed.
Thanks & Regards,
Anurag

Hi,
You might want to check whether both your browser's language settings are identical. The browser language could also determine the date format.
As a workaround, you could add an extra attribute to your context, and set the calculated property to 'true'.
In your table, add a new column and bind to this new attribute, and hide your original date column
If you sort using the date column that's hidden now, you could use the calculated field to fixed-format your date the way you prefer (by using the SimpleDateFormatter class for instance)
Cheers,
Robin

" APPLICATION NOT FOUND" while deploying Web dynpro java Application

Hi, I am getting a message that "application not found " While deploying the web dynpro java application .......... please give me a solution for this .

Hi Ram,
This error comes generally when your webdynpro project does not have an application. To create an application in your webdynpro project follow the underlying steps:
<Project>->WebDynpro->Applications ---> right click and create New Application.
Follow the steps to create the application.
Now if you create archive and deploy, it will not give you the error again.
Best Regards,
Ravi

Input element in web dynpro java not working

Similar Messages

Maybe you are looking for