Input-Enabled Query for Planning

Hi,
We have an issue in which the fields in this sheet are not able for input(WAD opens in display and not be edited), which were been edited previously , but not anymore.saimiliar situation is in dev, test and production.
Thanks
Sunil

Marc,
Appreciate your reply.
I installed the latest version for BEx and got from 7.01 to 800. But the "Transfer button' that contains the command to transfer the values to the planning buffer does not work - the totals are not getting updated in the query that makes me think it is not working.
I can still use the "Transfer values" option in the cell to update the values and to update the planning buffer.
I will open a customer message with SAP for this.
Thanks for your help.
Regards,
Kumar

Similar Messages

How to create an input enabled query with Integrated Planning

Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level. My problem is in the properties. On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it. Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected. There is a red exclamation here that says 'function not supported by server' Any ideas? Points will be awarded.
Peter

hi,
go through this help for the procedure...
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
hope it helps...

Object variable not set (Error 91) in Input Enabled query

Hello,
I'm having the following issue. I have created an input enabled query and included it in a planning workbook. Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
Object variable not set (Error 91)
This client has not used planning workbooks before. The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13.
I'm not finding any relevant so far in SDN. Any help anyone can provide is greatly appreciated.
Thanks,
Senthil

Hello,
Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
Thanks,
Senthil

How to Create an Input Enabled Query

Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
I am trying to provide a simple method for the end users to update planning data in a cube. From what I read I should be able to do this with a real time cube and an input enabled query.
I have created the real time cube with my desired characteristics and key figures. I have loaded base data to it and change it to be input ready.
Now I need to create my input ready query. I cannot seem to figure out how to do this. From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
Can someone enlighten me on what I am missing or suggest some reading on how to do this?
Regards
KB

OK, I got over this hurdle. Turning a KF on for input enable the selection to have the query open in change mode. However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
Any thoughts?

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Input Enabled Query

Hello BI Gurus,
I have an input enabled query . I have a restricted KG based on the fiscal period and amount KF.
For example:
Sales order           001/2009/Amount         002/2009/Amount       003/2009/Amount
100                      1000.00                            ---                         -
if there is any value then the field is input enabled and if there is no value then it is display only.In the above case 001/2009/Amount is input enabled and the remaining 002/2009/Amount     & 003/2009/Amount      are display only since it doesn't have any values.
If I have to move the amount 1000.00 from 001/2009 to 003/2009, how I have to do it. Please advise.
Thanks again for helping me.
Senthil

Hey Senthil
The right question to ask is -
Why are the cells with values only input-ready while the other cells which does not value are display only (not input)?
In my opinion, once you make the query input-ready, all cells should become input-ready, not just the ones which has values?
Once you have all the cells open for input, then the user can move the values from any month to any month.
Anyone?

Input enable query column using Planning function

Is it possible to input enable a column in query based on user action in Radio button group or button group by calling a planning function or WAD?
By default the column property for query will be Planning not allowed, but a user action should change the mode to Planning allowed using planning function or entries.
Thanks

Hi Ravi,
you could try to write an exit data slice and a planning function which sets the data slice to not lock the data during runtime. You can find several threads in this forum. how an exit data slice can be used to control the locking of data during runtime.
Together with the command I mentioned in my last answer this may work, but it still depends on your requirements. A dataslice checks only the combination of characteristics. If you can identiy a characteristic for each column this may work. If not, there is no characteristic combination which can be locked. Please consider this when designing your application. This may lead to an additional characteristic which is used just to identify which column should be locked.
Hope this helps ...
Regards Matthias Nutt
SAP Consulting Switzerland

Reg Input Enabled Query

Gurus,
I am trying to create an iput ready query. I have included all the characteristics of the Aggregation level in the query and given single selection conditions. I could see only one record after I execute my query, but its not ready for input. Please suggest me where I am deviating.
Thanks.

Hi Ram,
with htese SPS there should be not problems, just to be sure, you could start using all Nav-Attributes also in your Query.
I suppose you have already checked that your key figures are set to plannable, that the query ist set to plannable.
Are you showing system messages? Are there any when you open the Template or Workbook?
Are you maybe locking yourself because you show the data also in the planning modeler?
Otherwise I suggest you start building you query fresh from scratch.
First use all characteristics in the lines and collumns, if this works, then start building restricted key figures and filter in the way you really need it.
filter - reminds me - do you use maybe the same char in both areas on the filter section of the query (I don´t know what it is called in english, I mean the first tab in query builder)? please use and restrict each char only in one of these areas.
hope this helps.
Cornelia

Can we enable Info Objects as input in the Input Ready Query...

Hi Folks,
As I wanted to implement Input Ready Query for Planning in which User has to enter Charactersitc Values apart from Keyfigures.
Per Example:-
Project Number and Budget are Fields in Input ready query. Here user wanted to enter Project Number and Budget values Manually.
Is it possiable, if yes, can you give me your idea how to implement this scanario in IP by creating Aggregation level or Input ready query.
Thanks,
Venkat

Dear Snehith,
Thank you very much for your quick responce, Since Thursday and Friday are weekend holidays for me that is the reason i didn't respond your answer. Sorry for the my delay responce.
In my business case is here only one time selection only not for every row selection.
Before post this i was created One Planning Cube>on top of this i created 4 Aggregations Levels>created Planning Filter with respective aggregation Levels > Created 4 Input Ready Queries with respective 4 aggregation levels>Created one web template>used Tab Strip Container Web item and assign 4 Input ready queries to 4 data providers>Created Variables for Exe Department in Inputready queiry and assigined to Data Providers in WAD.
Now my Web template is asking user input and giving Exe Department values and then entering to out put where user can able to give values and save plan values. But Exe Department characterstic is also displying in Coloum area which should not be displyed in my case. becase of whater characterstics assigned to Dropdown they should not appereard in Coloum area.
How can i do this.? Can you provide your views...
I hope you clear what i am mean here..

How to implement the input help at web for the input ready query?

Dear all,
As you konw when we create the input ready query for Planning, we can insert the new record for plan with Analyzer tool. We also can use input help(double clike the space) for input the master data.
I want to konw when I use Web Appliaction Designer to run the query at the web, How can I use the input help for planning data.
My customer request me must implement the input help function at web.
Thanks a lot
best regards,
Leon
Message was edited by: Leon Wang
Message was edited by: Leon Wang

Hello,
It seems Input Help is not possible with WEB.
Check out the link below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Input Help - with Web application designer</a>
<b>Bex Analyzer -</b> You access input help for a cell by double clicking on it or choosing the F4 button.
<b>Web Appln Designer</b> - Input help is not available
Hope it Helps
Chetan
@CP..

WAD template for INPUT READY Query

Gurus,
I have created a real time cube and did al steps correctly in terms of Input ready Query Design. ( Set the Query to Change Mode , changed Key figures to accept Data from Users and Plan functions).
I get the out put in read only mode . I mean the key figures does not allow me to plan .
I am clueless as I seem to do all correclty. We are on latest Service pack .
I discovered we are uisng the webtemplate 0ANALYSIS_PATTERN . DOes this need to be changed?
ANy suggestions please ....

Hi,
Suggest check if you are able to enter data using the input enabled query in BEx just to make sure that the query is correctly developed.

Problems with Input Ready Query

Hello All,
I'm facing problems with input ready query for BI IP.
I've created the input query on aggregation level and maintianed all the planning settings. It is not allowing me to edit, when i'm attaching in the web template.
I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
Please help me in this regard.
We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
Regards
Kumar

Hello Johannes,
Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
I've checked even planning tab page under properties...it is also fine..
But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
Please suggest me if there are any notes to be applied, we are on Support Pack 10.
Regards
Jeevan Kumar

What is Input ready query

Hi Gurus
I am looking for some good information on Input ready query, can any body help me to understand this concept?
I tried to surf this forum but not able to get meaningful information on the basics of Input ready query.
I would appreciate your help.
Thanks
Kris

Hi Kris,
An input ready query is nothing but a planning enabled query.
You can create an input ready query on a real time info provider only.
This type of a query can be created on top of the infoprovider directly or on an aggregartion level based on the infoprovider.
There are some pre requisites as well to make the query planning enabled.
Once you create a planning enabled query, the planning can be done either in BEx Analyzer or in the web.
Maybe you ccan get more info from th below given link.
[http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Regards
-Neethu

Input ready query on multi provider

Hi all,
i have a requirement to create multi provider on actual and planned cubes.
what is the prerequisite for this? (my actal cube contains some data and planned cube
does'nt have any data).
and what is the flow when we execute the query and save some data?
and when the report executes the data will come from actual cube or from planned cube?
please provide ur inputs for this.
Thanks in Advance,
Reshma.

Hi,
When a report executes on a multiprovider it will fetch data from the all underlying Infoproviders.
Here your Planned cube doesn't contain any data, so the report displays data from the Actual cube.
To enable the input enable query, we have to use the Aggregation level as infoprovider in the multiprovider,
When you save the data it will update the Plan cube .
REDDY

Datasource for plan value in cost center accounting

Hi
I would like to create query for plan value that maintain in source system via tcode KP06
(Controlling > Cost center accounting > Planning > Cost and activity inputs). Can experts please share with me which datasource to turn on in order to send the data to BI for reporting?
Thanks
Kang Ring

Hi,
Try 0CO_OM_CCA_1.

Input-Enabled Query for Planning

Similar Messages

Maybe you are looking for