Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property  " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Similar Messages

  • Query/web template coming up blank in the portal

    Hi,
    I got one requirement saying that query/web template coming up blank in the portal.I have checked in portal it is blank.
    I don't have much knowledge about portal. I am not able to find this query name in the SAP gui(dev,q prod).can we publish the query with out creating in BEx .I don't understand can you please help me to resolve ths issue.
    Thanks
    Murali

    I don't know where to find the URL that the iView is pointing to...?Please guide me .
    Finally i came to know that the base query and one of the view is not populating the data in portal other views are populating the data.the views are created based on region(usa,europe..etc).I have executed this view and base query in BEx I am getting the error "internal error receiving from the bw serverfailed bw server raised exception:SYSTEM_ FAILURE. I think due to that the data is not populating in th portal. Please let me know how to resolve this issue.
    Thanks
    Murali

  • Not able to change the original system of the object

    Hello
    BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
    I would like to change original system from Q01 to D01 to enable object modification.
    I am not able to change the original system of the object in the tran se03 as  system is disabled.
    Original System          Q01   (grey)
    Any solution for this ?
    thanks

    hi,
    before transporting maintain the settings in the Dev system as follows.
    Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
    In this maintain the
    Original source system                                   Target source system
    Technical name of R/3 client of test              Technical name of R/3 client of dev system
    This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
    regards,
    Arvind.

  • I am not able to change the ip adress with the change of network...e.g i am using a different network in office and home bt my office inter ip adress is showing at my home network....user id are different and d ip adress is not changing

    i am not able to change the ip adress as i have changed the network...my old ip adress is been shown....i cant edit it n change it

    Manually input your SSID and Password
    Settings>Wi-Fi>Other...>Other Network
    http://i1224.photobucket.com/albums/ee374/Diavonex/d83f974f.jpg

  • My past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

    my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

    You can contact iTunes support and request that they remove the $0.68 from your account here:
    http://www.apple.com/support/itunes/contact/
    They should respond within 24 hours.

  • Not able to change the the Contract Line Item Payer

    Hi there,
    I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
    I checked the credit management assignment and the Business partner is assigned with the required Payer.
    Request your help.
    Thanks,
    Renjith

    Hi Renjith
    So first of all  check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
    As you are getting error  '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
    Regards
    Srinath

  • Not able to change the roles through  the ERM after uploading from ECC

    Hi
    We are not able to do the following activities after uploading the roles into ERM from Backend system
    1) We are not able to see any transaction data but we are able to see org values.
    2) We are not able to change the roles from ERM.
    Vserion and support pack leavel : GRC5.3 and 13
    Please help in this.
    Thanks in advance.
    With Best Regards,
    support

    How are you trying to do this? using oiddas ?
    Can you explain more in detail?
    Greetings.

  • Not able to change the Valuation class of a Material

    Hi Team,
    I am not able to change the Valuation class of a Material even if the stock is zero.
    Please assist.
    Thanks in advance.
    Chetan

    Hi Chetan,
    Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
    Thanks,
    Ninad

  • Not able to change the price of PO

    Hi All,
    I am not able to edit the price on PO.
    Materail is free text catalog orders from SRM, I am not able to change the price.
    Could you please help me in changing the price.
    Is there any other steps i need to do to change the price.
    Thanks

    Hi there,
    Is it greyed out or do you get an error?
    Are there any follow-on documents?
    Regards,
    Matthew

  • I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

    I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

    I have an iPhone 4 also.  If you are referring to the flyover view, its unavailble for the iPhone4.  If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
    Hope this helps

  • Not able to change the password using FNDCPASS

    I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
    [applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
    Log filename : L2741743.log
    Report filename : O2741743.out
    APP-FND-01630: Cannot open file L2741743.log for appending
    Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
    Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
    Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
    Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
    Can some one pls guide me on this

    Duplicate post-
    Not able to change the password using FNDCPASS
    Please post only once.
    Thanks,

  • I am not able to change the object after upgrade(SPAU Activity).

    HI All,
    I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
    Procedure
    Comsult your system administrator.
    Thanks in Advance,
    Mahesh Devershetty

    Hi,
    Does the user who would like to change the screen have the authorisation
    for S_DEVELOP in his profile? Please run transaction /NSU53 after the
    failed authorisation. You will get an information which authorisation
    is missing.
    Additional please check if you have open entries in transaction SPAU for
    that object.
    If you couldn´t solve the issue I need an user to analyse it in your
    development system.
    That user needs all authorisation for development and has to be
    registrated as developer.
    The system uses the authorization object S_DEVELOP for Workbench objects
    can you please check your user master record whether it contains the
    required autorization or not.
    Please also ensure that modification adjustment is turned on as per note:
    197600  Switching the Modification Assistant off and on
    Aidan

  • Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

  • Not able to change the size of the Drive

    Hello ,
    I have a template with 50 GB C drive and I want to a create a VM having 100 GB C drive using this template  . But I am not able to change C drive size from the edit settings . After changing the size from the edit settings to 100 Gb , I found that in newly created VM the size of the C drive was 50 Gb.
    If it is possible to change the C drive size to 100 Gb without making any changes in template ?
    Can anyone suggest me how to do this ?

    This question should be posted in a forum area related to a product - are you using vSphere, and if so which version?

  • Not able to change the data of test data containers in production system

    Dear All,
    We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System.  Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data. 
    May be the reason is SCC4 transaction code has set the below option.
    Changes and transports for client-specific Objects
    u2022 No changes allowed
    Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
    Could you please let me know the solution for this?
    Your help is really appreciated.
    Thanks,
    Mahendra

    eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
    Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
    Let me know if you need more information
    thanks
    Venkat

Maybe you are looking for