Input Enabled Query

Hello BI Gurus,
I have an input enabled query . I have a restricted KG based on the fiscal period and amount KF.
For example:
Sales order           001/2009/Amount         002/2009/Amount       003/2009/Amount
100                      1000.00                            ---                         -
if there is any value  then the field is input enabled and if there is no value then it is display only.In the above case  001/2009/Amount is input enabled and the remaining 002/2009/Amount     & 003/2009/Amount      are display only since it doesn't have any values.      
If I have to move the amount 1000.00 from 001/2009 to 003/2009, how I have to do it. Please advise.
Thanks again for helping me.
Senthil

Hey Senthil
The right question to ask is -
Why are the cells with values only input-ready while the other cells which does not value are display only (not input)?
In my opinion, once you make the query input-ready, all cells should become input-ready, not just the ones which has values?
Once you have all the cells open for input, then the user can move the values from any month to any month.
Anyone?

Similar Messages

  • Object variable not set (Error 91) in Input Enabled query

    Hello,
    I'm having the following issue.  I have created an input enabled query and included it in a planning workbook.  Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
    Object variable not set (Error 91)
    This client has not used planning workbooks before.  The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13. 
    I'm not finding any relevant so far in SDN.  Any help anyone can provide is greatly appreciated.
    Thanks,
    Senthil

    Hello,
    Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
    Thanks,
    Senthil

  • How to create an input enabled query with Integrated Planning

    Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level.  My problem is in the properties.  On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it.  Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected.  There is a red exclamation here that says 'function not supported by server'  Any ideas?  Points will be awarded.
    Peter

    hi,
    go through this help for the procedure...
    [http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
    hope it helps...

  • How to Create an Input Enabled Query

    Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
    I am trying to provide a simple method for the end users to update planning data in a cube.  From what I read I should be able to do this with a real time cube and an input enabled query.
    I have created the real time cube with my desired characteristics and key figures.  I have loaded base data to it and change it to be input ready.
    Now I need to create my input ready query.  I cannot seem to figure out how to do this.  From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
    Can someone enlighten me on what I am missing or suggest some reading on how to do this?
    Regards
    KB

    OK, I got over this hurdle.  Turning a KF on for input enable the selection to have the query open in change mode.  However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
    I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
    Any thoughts?

  • Input Enabled Query - Web Template - Not able to change the key figure.

    Hello IP Gurus,
    This is a simple question .
    I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
    I attached the query to a web template.
    When I execute the template I am not able to enter or change the key figures.
    Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
    Thanks
    Senthil

    HI Senthil,
    Please ensure that u have enabled the property  " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
    For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
    regards.
    Shafi.

  • Input enable query column using Planning function

    Is it possible to input enable a column in query based on user action in Radio button group or button group by calling a planning function or WAD?
    By default the column property for query will be Planning not allowed, but a user action should change the mode to Planning allowed using planning function or entries.
    Thanks

    Hi Ravi,
    you could try to write an exit data slice and a planning function which sets the data slice to not lock the data during runtime. You can find several threads in this forum. how an exit data slice can be used to control the locking of data during runtime.
    Together with the command I mentioned in my last answer this may work, but it still depends on your requirements. A dataslice checks only the combination of characteristics. If you can identiy a characteristic for each column this may work. If not, there is no characteristic combination which can be locked. Please consider this when designing your application. This may lead to an additional characteristic which is used just to identify which column should be locked.
    Hope this helps ...
    Regards Matthias Nutt
    SAP Consulting Switzerland

  • Input-Enabled Query for Planning

    Hi,
    We have an issue in which the fields in this sheet are not able for input(WAD opens in display and not be edited), which were been edited previously , but not anymore.saimiliar situation is in dev, test and production.
    Thanks
    Sunil

    Marc,
    Appreciate your reply.
    I installed the latest version for BEx and got from 7.01 to 800. But the "Transfer button' that contains the command to transfer the values to the planning buffer does not work - the totals are not getting updated in the query that makes me think it is not working.
    I can still use the "Transfer values" option in the cell to update the values and to update the planning buffer.
    I will open a customer message with SAP for this.
    Thanks for your help.
    Regards,
    Kumar

  • Reg Input Enabled Query

    Gurus,
      I am trying to create an iput ready query. I have included all the characteristics of the Aggregation level in the query and given single selection conditions. I could see only one record after I execute my query, but its not ready for input. Please suggest me where I am deviating.
    Thanks.

    Hi Ram,
    with htese SPS there should be not problems, just to be sure, you could start using all Nav-Attributes also in your Query.
    I suppose you have already checked that your key figures are set to plannable, that the query ist set to plannable.
    Are you showing system messages? Are there any when you open the Template or Workbook?
    Are you maybe locking yourself because you show the data also in the planning modeler?
    Otherwise I suggest you start building you query fresh from scratch.
    First use all characteristics in the lines and collumns, if this works, then start building restricted key figures and filter in the way you really need it.
    filter - reminds me - do you use maybe the same char in both areas on the filter section of the query (I don´t know what it is called in english, I mean the first tab in query builder)? please use and restrict each char only in one of these areas.
    hope this helps.
    Cornelia

  • WAD template for INPUT READY Query

    Gurus,
    I have created  a real time cube and did al steps correctly in terms of Input ready Query Design. ( Set the Query to Change Mode , changed Key figures to accept Data from Users and Plan functions).
    I get the out put in read only mode . I mean the key figures does not allow me to plan .
    I am clueless as I seem to do all correclty. We are on latest Service pack .
    I discovered we are uisng the webtemplate 0ANALYSIS_PATTERN . DOes this need to be changed?
    ANy suggestions please ....

    Hi,
    Suggest check if you are able to enter data using the input enabled query in BEx just to make sure that the query is correctly developed.

  • Input ready query on multi provider

    Hi all,
    i have a requirement to create multi provider on actual and planned cubes.
    what is the prerequisite for this? (my actal cube contains some data and planned cube
    does'nt have any data).
    and what is the flow when we execute the query and save some data?
    and when the report executes the data will come from actual cube or from planned cube?
    please provide ur inputs for this.
    Thanks in Advance,
    Reshma.

    Hi,
    When a report executes on a multiprovider it will fetch data from the all underlying Infoproviders.
    Here your Planned cube doesn't contain any data, so the report displays data from the Actual cube.
    To enable the input enable query, we have to use the Aggregation level as infoprovider in the multiprovider,
    When you save the data it will update the Plan cube .
    REDDY

  • Input enabled column to enter text in query

    Hi All,
    I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I am thinking only key figures can be input enabled and they can accept only numbers but not characters.
    I am new to BI Planning concept. Please let me know the best solution for my requirement.
    Thanks in Advance!
    Sonali.

    Hi,
    Please take a look in the following thread.
    Re: Input Ready query text field
    Hope this helps.

  • Input Ready Query is not enabling on Multi Provider...

    Dear Folks,
    I have created one Multi Provider which is having 3 info cubes, out of three info cubes. 2 Planning Cubes & 1 Normal Cube.
    I have  created one Aggregation Level on top of Multi Provider and created input ready query which is not enabling as a input for key figures.
    Do you have any idea on this.
    Thanks,
    Venkat

    Hi,
      Please refer to the following link for more details on the same,
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/1d023a41130bd5e10000000a422035/content.htm
    Check the following points to make your query as input enables,
    1. Drill down or filter all the characteristics present in the query.
    2. Check whether the "Open query in Change mode" is checked in Query properties.
    3. Check whether your real time infocube is in "Plan mode"
    4. Make sure that your planning cube is not locked by any other person when you are trying to open your query.
    Regards,
    Balajee
    Edited by: Balajee Sivakumar on Jan 31, 2011 5:00 PM

  • Can we enable Info Objects as input in the Input Ready Query...

    Hi Folks,
    As I wanted to implement Input Ready Query for Planning in which User has to enter Charactersitc Values apart from Keyfigures.
    Per Example:-
    Project Number and Budget are Fields in Input ready query. Here user wanted to enter Project Number and Budget values Manually.
    Is it possiable, if yes, can you give me your idea how to implement this scanario in IP by creating Aggregation level or Input ready query.
    Thanks,
    Venkat

    Dear Snehith,
    Thank you very much for your quick responce, Since Thursday and Friday are weekend holidays for me that is the reason i didn't respond your answer. Sorry for the my delay responce.
    In my business case is here only one time selection only not for every row selection.
    Before post this i was created One Planning Cube>on top of this i created 4 Aggregations Levels>created Planning Filter with respective aggregation Levels > Created 4 Input Ready Queries with respective 4 aggregation levels>Created one web template>used Tab Strip Container Web item and assign 4 Input ready queries to 4 data providers>Created Variables for Exe Department in Inputready queiry and assigined to Data Providers in WAD.
    Now my Web template is asking user input and giving Exe Department values and then entering to out put where user can able to give values and save plan values. But Exe Department characterstic is also displying in Coloum area which should not be displyed in my case. becase of whater characterstics assigned to Dropdown they should not appereard in Coloum area.
    How can i do this.? Can you provide your views...
    I hope you clear what i am mean here..

  • Key Figure in a Input Ready Query

    I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
    Thanks
    Rashmi.

    Hi,
    I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
    1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
    2.The START QUERY IN THE CHANGE MODE , should be on.
    3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
    4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
    5.Pls make sure  , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
    6. Pls chk the locks( SM12) always, and delete all of them, if any.
    7. Log-off the  Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
    Regards
    CSM Reddy

  • Input enabled cell to enter text

    Hi All,
    I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I am thinking only key figures can be input enabled and they can accept only numbers but not characters.
    I am new to BI Planning concept. Please let me know the best solution for my requirement.
    Thanks in Advance!
    Sonali.

    Hi,
    Please take a look in the following thread.
    Re: Input Ready query text field
    Hope this helps.

Maybe you are looking for