Input Field: Value Range in IP Web Layout

Hi Experts,
I've created a Web Layout based on IP with a copy function (e.g. from actual 2008 to plan2009) over 12 calendar months. For choosing the months to be copied, I created a Variable (calmonths) and added an Input Field into my layout to enter the the months to be copied. I referred the variable to the input field and it's working...
When I want to select several months to be copied, I can type in " 1; 2; 3; " into the input field, execute the planning function and only month 1, 2, 3 (i.e. Jan, Feb, Mar) are being copied. But when I want to copy all 12 months, i have to enter 1; 2; 3; 4;...11; 12 which is kind of anoying! Has somebody some experience whether I can use a value range like 1-12 (or something like that) to avoid entering all the months individually? (I tried 1-12; 1- 12; 1 - 12; 1:12 etc but nothing like this is working)
It would be very helpful if someone has an idea
All the best,
Norbert

Hi Mayank, hi Srinivas.
Thanks a lot for your valuable input! Unfortunately I was not able until today to test your recommodations.
I tried your Interval variable but then faced the problem that I cannot enter multiple months anymore (e.g. 5 - 8 worked, 1; 3; 5 not). Then I inserted both variables, multiple values & interval, into the planning function as well as in the button group in WAD for executing the PF but was not able to execute the following example: 1; 8; 4 - 6. After trying out for some time I figured out that one has to type in the figures in the following order: 4 - 6; 1; 8. Only then I am able to execute the planning function for the months April-June & Jan & August. So, if you're facing the same problem in the future, maybe you have the solution
Best regards,
Norbert

Similar Messages

Bind input field value to a variable fails

Business need : The user wants to re-evaluate lines by a percentage value which he fills via his BI-IP screen.
I created an INPUT FIELD in WAD and I am trying to link a variable value (initially created in BI-IP through transaction RSPLAN)
to this INPUT FIELD.
Whenever I fill the input field with a value, the value is not being transferred to the variable.
Please help how to bind an INPUT field value to a variable to be transmitted to a planning function.
I have made many trials but in vain.
Please help.

Hi.
I will present my scenario (it works in my system). From this scenario you may "cut" implementation for your scenario.
Lets sat I have an input fileld item and I want to read value (in my case numeric value) and pass this value to any planning sequence.
1. Create in Bex variable (in my case it is formula variable) lets say Z_INPUT_VAR
2. In WAD, when you executin planning sequence (lets say by pressing button execute) in command EXEC_PLANNING_SEQUENCE_SIMPLE define data binding.
When you clicked data binding->variable input MANUALY your variable name (Z_INPUT_VAR) in popup window.
3. In variable type select (ITEM_INPUT) type
4. In web item select your input field item.
This way you will pass inputed value to vaariable and planning sequence.
Then in planning function you also may use VARV() to read value of Z_INPUT_VAR variable.
Regards.

Unable to capture Input field value on BSP page

Hi
I have copied ROS (SRM) standard application ROS_PRESCREEN3 into custom and added one input field .
Now when user enters some value in it , i am not able to get that value in my back-hand code.
I have treid the availble code on Fourm , its not working .
Regards
Raul

Hi ,
I am getting the input field values in my back hand using MVC .
Regards
Raul

How to clear input field value on back

Hi All,
I have developed an application, in which user put sales order on first page and press a button then its detail display on second page using restAPI. Now when I press back button on second page then it takes me to first page with holding previous sales order value in input field. And when I change its value and press that button again then it shows me previous sales order detail.
Please suggest me, how to refresh cache and input fields value on back button?
Thanks & Regards
Shubhanshu

Hi Viren,
My code is,
First view
sap.ui.jsview("uitest2.first", {
getControllerName : function() {
return "uitest2.first";
createContent : function(oController) {
var text = new sap.m.Label({
        text: 'Dealer Code',
       layoutData: new sap.m.FlexItemData({alignSelf: sap.m.FlexAlignSelf.Center })
var input = new sap.m.Input("CUSTOMER",{
        type: sap.m.InputType.Text,
      placeholder: 'Enter Dealer code...',
      layoutData: new sap.m.FlexItemData({growFactor: 1, alignSelf: sap.m.FlexAlignSelf.Center})
var Dealer = new sap.m.HBox({
            items:[ text,input
//                   new sap.m.Label({
//                   text: 'Dealer Code'
//                   new sap.m.Input("CUSTOMER",{
//                   type: sap.m.InputType.Text,
//                   placeholder: 'Enter Dealer code...'
                   height : "6em"
      var button = new sap.m.Button({
           text: "Submit",
           press: function(oEvent) {
              oController.loadData();
              app = sap.ui.getCore().byId("myApp");
              app.to("idsecond1");//, sap.ui.getCore().byId("CUSTOMER").getValue());
           layoutData: new sap.m.FlexItemData({alignSelf: sap.m.FlexAlignSelf.Center})
      return new sap.m.Page({
     title: "Sales Dealer Info",
     content: [ Dealer,button
First controller
sap.ui.controller("uitest2.first", {
    loadData: function() {
        var oParameters = ({
        "CUSTOMER" : sap.ui.getCore().getElementById('CUSTOMER').getValue(),
         console.log(oParameters);
         var url = "http://###########:8000/sap/bc/zrst_customer?sap-client=800/";
         var oModel = new sap.ui.model.json.JSONModel();
         $.ajax({
         url : url ,
         dataType : "jsonp",
         type : "POST",
         data: oParameters,
         success: function(data,textStatus,jqXHR) {
         data = JSON.parse(data);
                 console.log(data);
                 oModel.setData(data);
         sap.ui.getCore().setModel(oModel);
Second View
sap.ui.jsview("uitest2.second", {
getControllerName : function() {
return "uitest2.second";
createContent : function(oController) {
var oTable = new sap.m.Table("table",{
       headerText: "Dealer data",
       columns: [
         new sap.m.Column({
           header: new sap.m.Label({text: "NAME"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
           header: new sap.m.Label({text: "CITY"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
           header: new sap.m.Label({text: "COUNTRY"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
           header: new sap.m.Label({text: "COUNTRYISO"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
          header: new sap.m.Label({text: "STREET"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
          header: new sap.m.Label({text: "PST_CODE"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
          header: new sap.m.Label({text: "TELEPHONE"}),
demandPopin : true,
minScreenWidth : "Tablet",
         new sap.m.Column({
          header: new sap.m.Label({text: "EMAIL"}),
demandPopin : true,
minScreenWidth : "Tablet",
       items: {
       path: "/KEY",
       template: new sap.m.ColumnListItem({
       cells: [
               new sap.m.Text({                              //new sap.m.ObjectIdentifier
               text: "{NAME}"
               new sap.m.Text({
               text: "{CITY}"
               new sap.m.Text({
               text: "{COUNTRY}"
               new sap.m.Text({
               text: "{COUNTRYISO}"
               new sap.m.Text({
               text: "{STREET}"
               new sap.m.Text({
               text: "{PST_CODE}"
               new sap.m.Text({
               text: "{TELPHONE}"
               new sap.m.Text({
               text: "{EMAIL}"
return new sap.m.Page({
title: "Dealer Info",
showNavButton: true,
navButtonTap:function(){
app = sap.ui.getCore().byId("myApp");
app.to("idfirst1");
sap.ui.getCore().getElementById('CUSTOMER').setValue("");
oModel.refresh();
content: [ oTable
Index.htm
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<script src="resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m,sap.ui.commons"
data-sap-ui-theme="sap_bluecrystal">
</script>

<script>
sap.ui.localResources("uitest2");
var app = new sap.m.App("myApp",{initialPage:"idfirst1"});
var page = sap.ui.view({id:"idfirst1", viewName:"uitest2.first", type:sap.ui.core.mvc.ViewType.JS});
var page1 = sap.ui.view({id:"idsecond1", viewName:"uitest2.second", type:sap.ui.core.mvc.ViewType.JS});
app.addPage(page).addPage(page1);
app.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>
Thanks
Shubhanshu

To Display Input Field Value in Pop Up

hii guys i want to display a input field value in a pop up dialog box.
For this i have taken a input field, a pop up component and a button.
In the dialog box of pop up element i have taken an output text which will display the value of input field.
Everything seems to be work fine if i am giving the value to input filed at design time.
But when i want to display the input field value entered at run time, the dialog box of pop up displays nothing..!!!

Thank you so much Arun for your help.
I did as you told me to do.
But somehow i think i am not getting it right.
I created a private String variable named value in my Bean Class and then i created its accessors..
setValue and getValue..
Then i set the value property of both input text and output text as #{package.BeanClass.value},
but its not working...!!!
Can you help me out with problem..!!

Input field value help

Hi all,
i gt problem to gt the value from the input field:STUDENT-OBJECT_ID, STUDENT-FILE_NAME into my sql statement. I using module. When i delcare a static value objectid = stud. My sql statement can regnoize. How can i gt the objectid base on my input field in the module?
MODULE VALUE_FNAME1 INPUT.
<b>*objectid = STUDENT-OBJECT_ID.
*filename = STUDENT-FILE_NAME.</b>
<b>objectid = 'STUD'.
filename = 'STUDFILE'.</b>
SELECT FIELD_NAME
    FROM STUDENT
    INTO CORRESPONDING FIELDS OF TABLE values_tab1
WHERE OBJECT_ID = objectid and FILE_NAME = filename.
endmodule.

Hi Gary,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
        bwkey LIKE t001k-bwkey,
      END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
        bukrs LIKE t001k-bukrs,
      END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS:    p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
Validation Section
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_BUKRS'
      value_org       = 'S'
    TABLES
      value_tab       = it_bukrs
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des
          INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
DATA: END OF   dynpfields.
DATA : sy_repid LIKE sy-repid,
         sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
Lesen des akt. Wertes von Dynpro
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = sy_repid
      dynumb     = sy_dynnr
    TABLES
      dynpfields = dynpfields
    EXCEPTIONS
      OTHERS     = 01.
IF sy-subrc = 0.
    READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
    IF sy-subrc = 0.
      v_bukrs = dynpfields-fieldvalue.
    ENDIF.
ENDIF.
SELECT bwkey FROM t001k
INTO TABLE it_bwkey
WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BWKEY'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_BWKEY'
      value_org       = 'S'
    TABLES
      value_tab       = it_bwkey
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to get Input field value?

Hi All,
I have some problem in getting of input value from View to customcontroller.
My problem is I have created a Input field in the view and if Iam giving the value to that field I can capture the value from View to customcontroller and send it as BAPI input.But My input filed is in the view Context.
How can i capture InputFiled value from View to CustomController.
Advance thanks
Nageswara.
Message was edited by: nageswar mandapati

Thanks for your response Patrick,
In my customcontrollerView all my BAPI mathods instances and execute methods are declared.All the attributes directly getting from model class.
But I have two views , in first view I created a input field(for that i created valueAttribute in that context).
Here I want give the conditions If the input field is empty then directly call the execute method of BAPI.
Otherwise give any input to the inputfiled then capture that value and send it input to BAPI from view to BAPI.
In my customcontroller
BAPI b = new BAPI();
b.Param1();
b.param2();
and
execute BAPI()
I done like this.
How can i capture the view input value how to send as a b.parama();
Please guide me .
Any snippests appriciate.
Thanks
nageswara.

Assign a value from dropdownlist to input field value on BSP page

Hi,
I'm new to SAP and ABAP. We have a CRM project in which I have to maintain BSP pages.
Now, coming to my problem: I have a input field with
value = "//BTAdminH/HeaderInfo"
This field is normally maintainable. The required function is now to set this field as not maintainable/readonly. Then, the value should be set automatically to an value, which will be selected from a dropdownListBox. After saving, the value HeaderInfo should have the same value like the selected value from the dropdownListBox.
How can I now set the field as readonly (this should be the easier part) and
how can I set the value for the HeaderInfo to the value of the selected value from the dropdownListBox?
If I set it directly like this
value = "//BTActivity/Priority"
it is shown on the BSP page correclty, but it is not saved as HeaderInfo.
Please help me.
Enja

Hello Gokul,
test was only for test purposes! I am using as a separator the plus sign!
But this is not the problem!
In debugging, the local variable has the concatenated value! So, this is working!
oncatenate ls_ddlb1-value ls_ddlb2-value ls_ddlb3-value into lv_headerinfo SEPARATED BY ' + '.
But when I assign the value of my set_headerinfo to the local variable, then it is returning only the separator sign!!!
if BTAdminH->GET_HEADERINFO( 'HEADERINFO' ) is initial.
BTAdminH->SET_HEADERINFO( attribute_path = 'HEADERINFO' value = lv_headerinfo ).
endif.
If I declare the local variable as one of the dropdown values, then it is getting populated also for set_headerinfo
lv_headerinfo =ls_ddlb1-value.
So, the assigning is also working! But it is not working, when the local variable equals more than one value! I hope that I could explained it in the right way for you!!!!
So. why is the value for set_headerinfo not the same as the one for the local variable! The local variable has the correct value after the concatination.
Regards
Enja

How to read the input field value into ABAP variable?

Hi All,
i need a read the value of an input field into an ABAP variable,and i am doing this in the following way
lstring = request->get_form_field('myFlag').
here 'myFlag' is the input field name,but this is not returning me any value into lstring.
I have gone through the SDN and tried to do this.
could you please help me out to resolve this issue.
Thanks in Advance,
Praveena

Dear Praveena
In which event are you putting this code. Place it in oninputprocessing event(Page with flow logic Model of coding). Then it will surely work.
Regards
Vijay.M

How to verify input field value at run time

Hi all,
I have a input text field (username) on my jsf page and while entring username i have to verify that input provided by me is correct or not.
For example-
I started entering Test in username and error message occurs at the same time after validating from db.
Can any body provide me the code snippet for the same.
Thanks much,

Hi,
If I understood you correctly, you can set autosubmit="true" on af:inputText, and bind valueChangeListener to the method in backing bean where you can check whatever you need to check. That way, when inputText looses focus (or you press enter), the value will be submited to the server, where you can validate it.
Pedja

Input field for Range variable

I am trying to create a basic VC application based on SAP BI query. The query has a variable that is a Fiscal period range. I can input a Range, like 001/2009 - 005/2009. This input works fine in BI query, but VC returns error Invalid variable value. How to make the VC to accept the input value with Fiscal year Range.
Appreciate your help.

Hi
In VC syntax for entering variable value is different than the BI query. For the same thing which you have mentioned, you have to enter it as -
001.2009:005.2009.
Then only it will accept the values.
Regards
Sandeep

How to pass input field value from one region to another ?

What I am trying to do :
I have one page with 1 region with one text field and an apply button and a report region.
I want to be able to enter a value in the text field, click on apply and exploit this value in the source of the report region.
Of course, I want the the value in the text field remains after the click on the apply button.
What I cannot control with my try :
1 the text field is always wiped off after the push on the apply button, no matter what kind of "do not clear the cache" setting I have found, and no matter the "take this value for this parameter" setting I have done every where I have found it.
2 (but I think that this is related to 1) I cannot get working the conditional display of the report region on a NOT NULL condition of the above region text field.
I have tried the code of the page 23 of the customertracking demo packaged apps, but the button properties shown are not the same than what I can find in my apps : I guess this is a difference in apex version normal feature.
I think that what I am trying to achieve must be terribly simple but I cannot see it.

Ok I have found out that it was now an interactive report that has to be done for this kind of situation, and that in my case, I needed to enable a detailled report.
Now I have another question : one of my field is rich text : how to render it in my detailled report ?

Hiding Subform based on another field value which is not in Layout

Hi,
I tried using Formcalc for hiding a subform like below.
if ($record.BLOCK04.GT_ITEM_LEV1_910.DATA[].GT_ITEM_LEV2_910.DATA[].KDMAT == null)
$.presence = "hidden"
endif
My subform is Flowed, Western text
When i run it, its not working..so i hided using context condition like if there is no value in KDMAT, do not pass it to Layout...Now it's working..My problem is, when there is no vaue, it is leaving BLANK LINE in the print out..a gap is there for that row.
Please help me how to avoid the EMPTY/ BLANK LINE??
Thanks in advance

Hi,
All my PARENT subforms are Flowed only..still its not working..Yes, I want to print left to right only..
Please help..
I checked REPEAT SUBFORM but not MAX or MIN count..then it's working but it prints 2 times for first item which is wrong.
I am not understanding the behaviour of this..Please help

Updating extended fields in SRM Business Partner Web Dynpro UI does not work

Hey community,
I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
- Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
- I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
- In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
- I added corresponding Input fields and labels to the WD layout.
- in view /sapsrm/v_mdfsbc I customized the new fields
-> the new fields are visible in the WD, and, oh wow, they even show the correct data!
-> Unfortunately, updating the fields does not work, but000 does not get any data.
Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
I also regarded SAP Note 1453747, but the code was already right.
Any Ideas? Many thanks in advance!
Steffi

Hi Stefanie Krause,
I am also facing the same problem
I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
I added corresponding Input fields and labels to the WD layout.
-> the new fields are visible in the WD,
-> i am able to visible the input field in WD,
But if add some value press on next tab and back to the screen the value will be refreshed .
Kindly help me
Thanks and Regards,
Maruthi.M

Create dynamically a number of Input Fields

hi all,
one issue about creating dynamically a range of Input fields:
i have one sap.ui.layout.form.FormContainer.
at first i want to have one Input field in it. if this field is filled, i want to have a new one below, which is empty, and the cursor should be set to the new field.
so i know that there is an function addContent for the formcontainer, so i can listen to the changeEvent of the Input field, if this is filled i will add a new Input field.
at first: is this a good solution or is there any recommended way from SAP?
second: if i will implement it this way, how can i read the data from this "array" of input fields?
third: how can i set focus on input field in sapui5?
thanks for help!
Regards,
Alex

1) Solution sounds good to me
2) You can do it in multiple ways:
you can use content aggregation from FormContainer
you can access Input field by id (you would need to follow some kind of convention when giving id to newely created field, like "inputField" + count, count ++)
you can use RowRepeater (not sure though how it looks in FormContainer) and use a model for bining
3) SAPUI5 SDK - Demo Kit From my experience element.focus() works just fine

Input Field: Value Range in IP Web Layout

Similar Messages

Maybe you are looking for