Input fields are all messed up as far as input is concerned.

Nexus 10, Android 4.3
If I respond to reddit threads there are times when I hit the text field and it shows a cursor, but as I type the text will not show. The text is being entered and I can see it in the keyboard suggestion. I have to blind type some text, hit the switch app menu and select Firefox again to see what I typed.
It also has a hard time determining where the cursor actually is ( this text box I'm typing in just did this when I tapped a word to edit it ). If I try to move the cursor it seems to be stuck where it last was no matter how many times I click to move it. It visually appears to move, but if I start typing the text replaces or types where I last was. Swapping to the app selection screen and back seems to reset the cursor properly after I tap again.
On top of that, there are times when I close a tab ( I know, not related to slowness,etc.) the content of the closed tab will show up overtop of the tab that should be showing.
Also, it doesn't matter if I set the about:config flag the the smart bar or whatever it's called, touching tre page makes my tab bar slide closed and I want it to remain open like the last version.
This latest version is just really bad and it's starting to piss me off!

It normally happens after a while of replying and browsing. I normally read reddit and reply to multiple posts and after probably 5(?) replies it starts acting up. If I hit the switch app button and swipe Firefox away and reload it it will sometimes be fine for a bit. In fact, when I went to reply to this post, I think I may have had Firefox open last night and it opened the reply from email. Upon clicking on the login link, I had changed my password and needed to re-enter it. I selected the password field, entered my password and found out it wasn't showing the entry on screen. I hit switch apps, selected Firefox, and it showed that I just added my new password to the end of the old one. I selected the password field to clear it and the input key board wouldn't render. It covered half the screen like it was going to come up but it was plain black. Switching apps, swiping Firefox away, going to email and reopening the reply link brought Firefox back up and let me login and reply.
TLDR; It seems like a memory leak of some sort. It mostly happens after a while of browsing and entering data in inputs. It's not just reddit. It happens on any page that has inputs.
To add... normally when browsing reddit, I'll long press posts I want to read and open then in new tabs while I scroll down the page, when I get a few pages down, then I'll close the first tab and work my way down the open tabs replying here and there. I'm not sure if it's cause by that but when I witnessed the problem above, that was the only tab I had open... but I don't remember if I was using Firefox last night before going to sleep. (I've been getting frustrated with this bug and been trying the nightly and beta builds, which also act up). I've even resorted going back to Chrome for some browsing but it's bookmarking isn't as easy to use as the Firefox home page and I don't have all my session data there.

Similar Messages

  • Items of input fields are disabled

    Hi All,
    I have created form using Web Dynpro. In this form, I have provided connnectivity with R/3 using RFC. After creation of the form, I noticed that input fields are disabled. Can you please suggest me the possible reason for this. I have mapped  input field with model's parameter.
    Regards,
    Gaurav

    Hi Gaurav,
    The mistake you are doing is, you have to initialize the newly created input object. check below
    /** Hook method called to initialize controller. */
    public void wdDoInit()
    //@@begin wdDoInit()
    // Create a new element in the Bapi_Flight_Getlist_Input node
    Bapi_Flight_Getlist_Input input = new Bapi_Flight_Getlist_Input();
    wdContext.nodeBapi_Flight_Getlist_Input().bind(input);
    // Create new elements in the Destination_From and Destination_To nodes
    <u>input.setDestination_From(new Bapisfldst());
    input.setDestination_To(new Bapisfldst());</u>
    //@@end
    This means.. adding to sunitha's code.. you should do below
    public void wdDoInit()
    //@@Begin wdDoInit()
    Bapi<...>_Input input = new Bapi<...>_input ();
    wdContext.nodeBapi<...>_Input().bind(input);
    <u>input.setXXX(new expectingobjectvalue());</u>
    //@@end
    Check it...
    Thanks,
    Raags

  • IPhoto 11 events' dates are all messed up

    Hi, my iPhoto 11 events' dates are all messed up.
    I tried a solution that I found in the forum in which one should delete file com.apple.iPhoto but I don't have the said file.
    Any ideas?
    Thanks in advance!

    Yes you do. In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    You can then find and delete the necessary preference file.
    OT

  • My blogger sites are all messed up, and seem to be corupted.

    my blogger sites are all messed up, and seem to be corrupted.

    Try running Keychain First Aid and resetting the original keychain.
    Keychain Reset
    Keychain Issues - Resolve  see post by Kappy

  • My pages are all messed up where i can't even see the whole page anymore. this just started a few days ago.

    in just the past few days when i get on my homepage or any other sites like facebook, youtube, ect. the pages are all messed up and i can't even see the whole page because it is enlarged and out of center. when i am on on my fb homepage i have to scroll to the right to get to the log out. everything just looks all crazy and messed up on any site i go to.

    Upgrade your browser to Firefox 8 and check
    * getfirefox.com

  • Just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?

    Adds the ability to make and receive FaceTime audio calls
    Adds call waiting support for FaceTime audio and video calls
    Adds the ability to block incoming iMessages from individual senders
    Improves the accuracy of unread counts in Mail
    Resolves an issue that prevented Mail from receiving new messages from certain providers
    Improves AutoFill compatibility in Safari
    Fixes an issue that may cause audio distortion on certain Macs
    Improves reliability when connecting to a file server using SMB2
    Fixes an issue that may cause VPN connections to disconnect
    Improves VoiceOver navigation in Mail and Finder
    Provides a fix for SSL connection verification
    this was the update
    never said anything about the screen

  • Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Please repost on the CS6 part of the Audition Forums.

  • Xorg graphics are all messed up and glitchy (screenshots) How to fix?

    I've set up a new system, but the graphics are super glitchy!
    Here's what gdm (gnome) looks like when i enter run level 5 with an existing xorg.conf file:
    and here's what it looks like without xorg.conf so settings are automatic:
    With the first setup (xorg.conf included) there's no way to log in.
    Without xorg.conf, you can see the loging windows and log in, and when you get to the desktop, the background remains all messed up just like at the login screen.
    Any ideas what might be wrong? i'll be right back to post my xorg.conf
    Last edited by trusktr (2010-07-06 21:47:36)

    Here's the xorg.conf that renders the first un-usable screen:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    EndSection
    Section "Module"
    # Load "dri"
    Load "record"
    Load "glx"
    Load "dbe"
    Load "dri2"
    Load "extmod"
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS" "True"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "NV44A [GeForce 6200]"
    BusID "PCI:1:0:0"
    Option "RenderAccel" "True"
    Option "TripleBuffer" "True"
    Option "BackingStore" "True"
    Option "DamageEvents" "True"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    viewport 0 0
    Depth 24
    EndSubSection
    EndSection

  • Permissions are all messed up in 10.9

    I installed Mavericks 10.9 on my 2008 Mac Pro desktop a couple of months ago. Then the monitors (2 of them) developed odd patterns. Apple Care (AC) tried to help me start 10.9 in Safe Mode, but when the progress bar finished, the computer shut itself off. We could never start in Safe Mode. Then AC diagnosed a hardware problem and recommended an Apple repair shop near me. The the video card was bad and they replaced it. But when they got things running, the permissions were very screwed up. They spent a lot of time repairing them (I don't know how), and then they upgraded the MacHD from a 1.5T Seagate to a 2T Western Digital and cloned the old MacHD to the new 2T drive. I took the machine home and still had permission problems and other problems. Adobe Acrobat Pro would not print PDF files, which I fixed with a suggestion from the Apple Forum. Then Photoshop CS4 gave me a "License Expired" message (Error code 150:30). I fixed that from the Forum (Adobe Community > Downloading, Installing, Setting Up > Discussions: Error code 150:30), with a fix that required a little entry in Terminal ($ sudo sh install_fnp.sh). That allowed me to open Photoshop, but when I turned Photoshop off and restarted it I got the "License Expired" message again.
    On the advice of Apple personnel in the Apple Store in Spokane, I unstalled Photoshop CS4 and reinstalled it from the CS4 Suite DVDs, installing just PS with all the supporting apps that the installation automatically chose. Then when I started PS, I got an error "Don't have adequate permission access" or something like that that has been addressed in the Forums. From the Forums, I followed the suggestion of adding "username(me)" to the permissions window of the Info panel of the MacHD and choosing "Apply to enclosed items". That got rid of the "Don't have adequate permission access" error, but I got back the "License Expired" error again and PS wouldn't open. When I tried the "sudo sh instyall_fnp.sh" fix again, I discovered that I couldn't log in to Terminal:
    Last login: Thu Feb 20 18:27:35 on console
    login(12166,0x7fff7cf59310) malloc: *** error for object 0x7fe65b500180: pointer being freed was not allocated
    *** set a breakpoint in malloc_error_break to debug
    [Process completed]
    Meanwhile, using Disc Utility and "Verify Permissions" I see that my Permissions are still totally messed up. So I don't know what to do now.
    I also have a Macbook Air. I see that in "Disk Utility > Verify Disk Permissions", the Permissions are also messed up on my Macbook Air, on which I installed 10.9 recently, but it seems to be working ok, so I have just left it alone.
    I'm the Administrator and only User on this system. The Permissions remain a huge mystery to me. What is the difference between "Administrator", "System", and "Username(me)"? Should all these be present, with "Read & Write" access? And how do you fix such global Permissions problems?
    Can anyone help?
    Thanks.

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • 4.2 now Safari bookmarks are all messed up

    bookmark bar is all messed up many of my bookmarks are gone and I can't add any to the bar now. it has also done the same on my iPad

    So, do you think Apple is gonna get a fix out for this? Just curious, as they were the ones who were so big on the whole idea of Stacks in the first place.

  • Album cover are all messed up.

    I own Thousands of CD's an have spent countless hours copying them over to my computers.. I buy an iPod and notice something strange my covers are a messed up a little, so I spend the time to fix them. I by an iPhone and once again the covers are screwed up. now today I notice they are all different.My iPod my iPad and my iPhone as well as my iMac and Windows PC's this has to be an issue with the iTunes software.What happened? how do I correct this without loosing all my time again. this has also affected my music that I have purchased from the iTunes store.

    Hello there,
    And welcome to Apple Discussions!
    Your iPod's artwork cache may have become corrupt. I would suggest clearing it out and rebuilding it. To do this:
    1. Plug the iPod in and when it appears in iTunes, click on its device name on the left pane of iTunes if necessary
    2. Under the Music tab, remove the check mark next to “include album artwork on this iPod.”
    3. Hit Apply to sync the updated changes.
    4. After it has finished syncing, place the check mark back next to “include album artwork on this iPod” option.
    5. Again, hit Apply to sync the updated changes.
    6. Lastly, properly eject your iPod, and verify that the album artwork is correct.
    Hope this helps.
    B-rock

  • The font i used in my KEYNOTE presentation is not available when you upload it to the cloud.  So, now my  text boxes are all messed up.  How can I select ALL font boxes of presentation and change (at least) the font style?

    I have a large presentation that I need to access from the cloud THIS SATURDAY.  Now, after uploading from my iMac to Cloud, the font is all messed up because the font I selected on my mac is NOT available on the Keynote Cloud....so capitalization is wrong, inconsistent, etc.
    Is there a quick way to select all text and change the style?  Help..I am running out of time!

    What's the URL of the page?
    In the mean time clear the cache and reload the page.

  • Upgraded Itunes now videos are all messed up

    When I upgraded itunes tonight and plugged my ipod back in, somehow my videos are all labeled as songs and are taken out of the video section and put into the song section..and when I play it it just plays the audio and not the video and the TV icon is removed in my library..
    does anyone know how to fix this without having to reload them because that is a pain!
    Thanks!

    Quote from: Richard on 26-May-06, 08:02:50
    JMMD,
    Check the RAM and CPU Voltage and check the timings on your RAM.
    I would then load the latest nVidia nForce & ForceWare Drivers
    Take Care,
    Richard
    I'll check all the settings again but they looked fine when I glanced at them. I basically always left everything at default.
    Would I need to reload them (Nforce and Forceware) if they're already installed? If so, I'll give that a shot.
    Quote
    Did you take note of all your setting before flashing?
    Did you make sure all the settings were correct after the flash?
    Did you try a complete CMOS clear and set all the settings back again?
    I never really changed any of the settings. I'll check them again but they were basically all defaults or auto.

  • Email fonts coming from PC's  are all messed up!!!

    To my knowledge I have not changed any settings but for some reason the headings on email and the forwarded info (not the content) seem to be all messed up. When I was entering an encrypted word for an apple change I couldn't read what I was typing and it was rejected so I guess they couldn't read it either. It doesn't impact the day to day mail but I would like to know what this is and how to fix it! More specific-the text is small, dark and all mashed together. Impossible to decipher. Thanks to everyone

    Find a place to host the pic online, then Look at this post telling how to format (including adding graphics) posts for Apple Discussions...
    http://discussions.apple.com/thread.jspa?messageID=607563
    Like this...

  • My album photos are all messed up!!

    after i synchronized my ipod, all the album photos were all messed up!
    This is my first time to encounter such thing. I tried to reset it (pressing MENU and the central botton at the same time for a few sec.) and also update my ipod, bt none of these could help.
    What else can i do?Does anyone also have this problem?
    Message was edited by: lc_llc

    Hello there,
    And welcome to Apple Discussions!
    Your iPod's artwork cache may have become corrupt. I would suggest clearing it out and rebuilding it. To do this:
    1. Plug the iPod in and when it appears in iTunes, click on its device name on the left pane of iTunes if necessary
    2. Under the Music tab, remove the check mark next to “include album artwork on this iPod.”
    3. Hit Apply to sync the updated changes.
    4. After it has finished syncing, place the check mark back next to “include album artwork on this iPod” option.
    5. Again, hit Apply to sync the updated changes.
    6. Lastly, properly eject your iPod, and verify that the album artwork is correct.
    Hope this helps.
    B-rock

Maybe you are looking for

  • Coloring a section of Text in TextComponent

    Hi All I am looking for a way to color a section of text rendered on to text component like jedtiorpane. For Example..Conside a java File..How do I show the Class Name in separate color and Keywords in separate color ....? Any Idea Thanks

  • Firefox sync not supported

    I run Firefox Version 10.0.2. When I follow the link to Firefox sync, I get a page that states it is no longer supported. Is Firefox sync still available? Am I running the latest version?

  • Lan intercom between mac and windows

    Is there some app + windows program out there that can allow "push to talk" over a local network between a Mac and a PC? I prefer if I don't have to install anything on the PC, and that is free. But if there are not, then whathever is available. Ther

  • System call, line continuation issue

    Hello, I used Java system call on a linux script as below: Runtime.getRuntime().exec(myScript.bsh); Where myScript.bsh is a bash script file. While the bash script file was executed, the issue is that some scripts in the file were skipped during exec

  • [RS232] how to use InputStream and OutputStream

    hi i am using javax.comm i get input and outputstream               try {                out  = serialPort.getOutputStream();                         in    =serialPort.getInputStream();               } catch (IOException e) {                     }but