"input" folder is missing amoung the Watchfolders
Hi,
I'm just trying to create a very simple process in the Workbench.
*Defaul Start Point
*Watch folder
*Apply Policy
The problem is that "input" folder for dorpping the files is not created on teh server after files are deployed. If i create folder manually and dropp files in that folder, nothing is happens.
If process is initialized from teh workbench, file is protected and can be saved on the local drive.
I have LC ES2 Right Management installed + PDF Generation installed.
Any ideas?
Thank you!
/ds
You can configure the location of the "input" folder through the Administrative UI (http://server:8080/adminui), Look for the "Applications and Services" link off the main page, then "Manage Endpoints" to locate your Watched Folder endpoint.
Regards
Steve
Similar Messages
-
Spry_menubar.js missing from the DW CS4 Configuration folder
Dreamweaver CS4 reports that spry_menubar.js missing from the DW CS4 Configuration folder (specifically, missing from the Inspectors sub-folder).
Can someone please point to a link wherefrom this can be downloaded, and so replaced?
Thanks in advance, DanThanks so much for the answer.
It appears that SpryMenuBar.js may be different from the missing Configuration file, spry_menubar.js. I am hopeful that we can resolve this and, if different, learn where to download the correct .js file.
(Another configuration file was recently missing. A search brought up an Adobe download. So far, no such link has become available for this missing file, hence this query to the Forum.)
Again thanks, Dan -
/private/etc/cups folder is missing
I am working tech support for a college and a faculty member currently working abroad called in with a problem that Microsoft Word for Mac would lock up everytime he tried to save or print a file. I remoted into his machine and I tried the usual suspects and was able to determine that nothing would print at all from any app, and in fact when I went to system preferences and tried to open the printers, it locked up system preferences. Digging deeper, I discovered that I was getting this message in console:
com.apple.launchd[1] (org.cups.cupsd) Throttling respawn: Will start in 10 seconds
The error kept repeating. I researched and found this thread:
https://discussions.apple.com/thread/2151368?start=0&tstart=0
Which led me to try these terminal commands:
sudo cp /etc/cups/cupsd.conf /etc/cups/cupsd.conf.old
sudo cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf
I got an error in terminal that "No such file or directory existed"
So I checked and sure enough, inside of /private/etc/ there was no folder for cups. Its just gone. I assume that the folder being missing is the root of the problem, but I cant figure out how to get it back for him, especially considering that I am trying to assist him remotely. Any help or advice would be appreciated.# Become root
sudo -s
cd /private/etc
# Make the tar archive in /Users/Shared
tar -cjvf /Users/Shared/cups.tar.bz2 cups
# Exit being the root user
exit
cd /Users/Shared
# Check the contents of the tar archive
tar -tvf /Users/Shared/cups.tar.bz2
drwxr-xr-x 0 root _lp 0 May 6 17:33 cups/
dr-x--x--x 0 _lp admin 0 May 7 18:05 cups/certs/
-rw-r--r-- 0 root _lp 4524 Jan 20 2012 cups/cupsd.conf
-rw-r--r-- 0 root _lp 4380 Dec 23 2011 cups/cupsd.conf.O
-rw-r--r-- 0 root _lp 5978 May 13 2010 cups/cupsd.conf.bak
-rw-r--r-- 0 root _lp 6091 Jul 6 2011 cups/cupsd.conf.default
drwxr-xr-x 0 root _lp 0 May 13 2010 cups/interfaces/
drwxr-xr-x 0 root _lp 0 Apr 30 10:10 cups/ppd/
-rw------- 0 root _lp 1624 May 6 17:33 cups/printers.conf
-rw------- 0 root _lp 1624 May 5 16:53 cups/printers.conf.O
-rw-r--r-- 0 root _lp 172 May 13 2010 cups/snmp.conf
-rw-r--r-- 0 root _lp 52273 Jan 13 06:43 cups/ppd/Brother_HL_5140_series.ppd
-rw-r--r-- 0 root _lp 1072994 Apr 30 10:10 cups/ppd/HP_Photosmart_C4200_series.ppd
-rw-r--r-- 0 root _lp 1072931 Apr 21 13:08 cups/ppd/HP_Photosmart_C4200_series.ppd.O
-r--r----- 0 root admin 32 May 7 18:05 cups/certs/0 -
Photostream folder is missing, how do i fix this?
I get the error message that photostream folder is missing and the comcputer claims that there are no photos on my phone as well.
This kind of problem strikes from time to time with every versions of iWork applications and every versions of the Operating system.
As you are running Lion, go to :
Versions as a recovery tool
https://discussions.apple.com/thread/3303794
In this thread I described a workflow allowing us to extract the stored versions.
The scripts are available, ready for use in my public BOX (address below)
Navigate to
public_YK > about_OSX
and download the archive
Versions as Recovery Tool.zip
Yvan KOENIG (VALLAURIS, France) lundi 27 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k -
Hi Experts
When ever i book a participant in the back end The batch input folder is being created for the user.
If i process the Batch Input folder it is updating the Attendance Infotype of the paticipant.
Could any one share their ideas on how the back end system works when we r making the bookings with out using portal.
Thanks in advance
KumarHi Experts
When ever i book a participant in the back end The batch input folder is being created for the user.
If i process the Batch Input folder it is updating the Attendance Infotype of the paticipant.
Could any one share their ideas on how the back end system works when we r making the bookings with out using portal.
Thanks in advance
Kumar -
I recently had a hard drive crash on my iMac. After replacing the drive, I discovered that TimeMachine had apparently been turned off for six months, and all my photos from that period were missing after the restore. In looking on the external drive used by TimeMachine, I discovered a folder called Imac backup, and under iPhoto Library was a folder called Originals and subfolders for each year. To my surprise, there were photos covering the missing time period! Somehow I imported the 2011 folder from the external drive into iPhoto, and then I discovered they were small files of less than 100 KB each, not the 1-2 MB original photos. So now all of 2011 is screwed up, not just from May on. These photos also include faces pulled from many larger group photos.
I can get Jan - April restored using TimeMachine. But in continuing to explore the Imac backup folder, I found a similar folder in iPhoto Library called Modified. This folder has many of the missing photos in their original MB size in folders indexed by date for the missing period after April. Is there a way that I can get these modified photos back onto my new hard drive and into the iPhoto library without causing more damage? If TimeMachine was turned off after April, how did those modified photos and all those small images from the missing period find their way to the external drive?
Any wisdom greatly appreciated.What you want to do is merge the two Libraries? The only way to do this is to use the paid ($20) version of iPhoto Library Manager
I created a new iPhoto Library on the iMac and dragged the entire iPhoto Library from the MacBook into that new Library. It worked, however it all came over into one big album and my previous album structure was gone
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Regards
TD -
When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!
Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L -
Many apps are missing in the Utilities folder.
Hi there!
The MacBook Pro I'm using is Mac OS X, Version 10.7.5. The weird thing is: when I bought it, I tranferred my files from a previous Macbook to this current one using Migration Assistant. But now I couldn't find Migration Assistant in this Pro, and there are many applicatioins missing in the Utilities folder (now there is only one folder named 'contents' contained in Utilities).
Could anyone tell me if it is normal or how can I fix it?
Many thanks!!1) In your first post you said you have an MBP with Mac OS X 10.7.5, that goes by the name of Lion. Apple uses big cat names for its OS X versions. Mountain Lion is Mac OS X 10.8. Your MBP has Lion since you said you have 10.7.5.
2) If you reinstall Lion, and DO NOT do an erase and install, all applications and data, including photos and libraries, should be preserved. It is always a good idea to make a backup first just as protection. I have never had files damaged from installing or reinstalling the Mac OS X, but others have discussed that on here. However, if all is working well you do not need to resort to a Mac OS X reinstall - this is to clean up problems noted below.
3) By mangled files I simply meant a built in file that seems to be damaged or not functioning correctly. When you said that MA could not be opened due to a problem, that sounded like a damaged file. Could be another reason, but it is not uncommon for system-level files to get corrupted over time, especially when the computer is not shutdown properly or power outages/surges occur, or for other reasons. If there seems to be damage to system-level files the only way to clean things up is by reinstalling the operating system.
Reinstalling is usually very straight forward, but if everything is working fine it isn't necessary. You might as a first step try doing a restart on the MBP which will stop services that may be having problems, often does some minor house cleaning, etc. Try that first and see if all works well and see if MA will then start for you.
And by the way, when you said problems starting MA, there is a sequence for using MA, were you following that when you had the problem, or did you just try and start it from the MBP? -
My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?
Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc
-
"wdp" folder missing under the bin folder
Hi All,
I have no clue whats going on.
I have been successfully developing my WD application and deploying it on the server.But recenetly i added a few Value Nodes and value attributes to the Component Controller and tried to deploy the application but the deployment terminated in between without any messages.
I the rebuild the project and saw a lot of errors pertaining to my Import Statements in my java files which i am using for writing my business logic.
The unresolved import is the Interface file of my component controller.On checking further inside the bin folder in the navigator view I found that the "wdp" folder itself is missing.
I even deleted all the Value nodes and attributes that i had created but it didnt solve the problem.The "wdp" folder is created internally by the system.
I even created a new WD project and pasted the contents from the previous project but the same wdp folder went missing again.
Can someone tell me whats happening. Why is the "wdp" folder missing and how i can regenrate it so that my application may work again.
i am not being able to slove it at all.
Warm Regards
KrishnaHi,
Remove the project from workspace. Import it fresh, check component controller for errors.
If there are errors,
a) Go to the location of project in folder strcture
b) Check properties of files : .project and .classpath
c) If they are read only, change them explicitly to - read only false
d) reload & rebuild the project
regards,
ganga -
I get the message "unable to sync ipod. Required folder is missing". Never saw this before, and I have synced hundreds of times before. Does anyone know why?
Try deleting the iPod Photo Cache folder. There may be more than one such folder. For its location see:
iTunes: Photo sync creates iPod Photo Cac -
I have a Macbook Pro with iphoto '08 running on Mac OS X version 10.5.8. I used to be able to go to my pictures folder on my HD and access my pictures via that iphoto library folder. There used to be a small arrow next to the iphoto icon with all the albums then listed within the folder (to the right). That arrow is now gone and all I have is the iphoto application icon which just reopens iphoto when I click on it, but I want to be able to access the data files. Somehow I do have files btwn 2008 and 2009 but it hasn't created these since then...Could someone please help me to restore this ability? I have read other similar posts but they seem to be related to lost data all together and I do luckily have all my pictures in iphoto still. I just can't access them in the pictures folder which means I can't access them on my external hard drive. I am now out of start up disc space somehow so I figured I had to delete some albums (I have 12,090 pictures) and do have them backed up but want to make sure I can go back for them when I need them. I did export all the pictures to a folder on the hard drive but it is all 12,090 in one long list with only numbers as names and not in any order, this will be a nightmare to access later! Please help! Thank you!
You can’t open your current photo library using this version of iPhoto.
That indicates that that is your library. Put it in your Pictures folder if it already isn't there and make sure it's named "iPhoto Library". It should look like this:
Now launch iPhoto with the Option key held down and select that library to open. If you get that same message close iPhoto and try the following;
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Some of my emails are missing from the VIP folder on my iPhone 5
I know they are in my inbox but they don't show up in the VIP folder. I'm using Yahoo mail and I don't have any filter set on these emails.Any idea on how to fix this?
Thanks!Maxine,
With the recent update of the Creative Cloud Desktop app (1.9.1.474) we unfortunately introduced a bug which causes the creation of a new Creative Cloud Files folder, and re-sync of all content. This will only occur the first time the sync application runs after the update. This has caused understandable pain and confusion, for which we truly apologise.
The Creative Cloud Files app contains logic that supports the use of multiple Adobe IDs. This allows you to sign out of one ID and in to another, but keeps your Creative Cloud content separate. When you sign out and change IDs, the app moves the previous Creative Cloud Files folder and it's contents and appends it with the previously signed in ID (User@AdobeID). It then creates a new main folder and starts to sync content of the new ID.
The bug which I mentioned previously occurs, as the app believes an ID switch has taken place and as such, moves the current Creative Cloud Files folder and tries to append the previously signed in ID. As no switch has actually taken place it manifests as (Unknown). The app then creates a new main folder at syncs down the data.
Essentially what you end up with is a Creative Cloud Files folder with your newly sync'd data and a Creative Cloud Files (Unknown) folder that contains duplicate data.
This occurs once, after the last update completes.
The fix is to simply delete the Creative Cloud Files (Unknown) folder.
I would advise that you ensure you have no pending edits that you may have made offline and that you check the contents of the new, main Creative Cloud Files folder contains everything you expect it to. If not, check the contents of the Creative Cloud Files (Unknown) folder.
If there is still a discrepancy with your data, you can check on creative.adobe.com to confirm your data is there.
If you have any further problems or questions about this particular issue please email [email protected] -
I do not have a disc & believe I got it when I bought this desktop in 2011. All other software in the Creative Suite works fine but Photoshop says: "Some of the application components are missing from the Application directory. Please reinstall the application." Can anyone help me???
If you registered your Adobe applications, you can retrieve the s/n by accessing your Adobe account at the Adobe corporate web site.
You can do a search for the trial version.
You are NOT addressing Adobe, and I'm not inclined to do all your legwork for you. Sorry. -
Records are missing in the File which XI has placed in Target FTP server
Hi All,
I have a scenario where in XI is transfering the files from ECC to Target System . No transformation required here . I am using AAE to run this scenario.
Issue i am facing here is that i can see few records missing in the File which XI had placed in the Target system FTP server . Same file if i check it in archive folder of ECC (which XI has archived after picking the file), complete set of records are present for the same file.
Need your inputs please....
Note : XI is using AAE to transfer the files and no mapping . Also i tried to check out the audit logs in the channel monitoring . Unforutanely i was not able to see the logs to check the bytes that was transferred while readng and writing the file . Sometimes i have faced audit logs issue in PI 7.1
Regards
Vinay P.Please use temporary name scheme
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
hope this helps
regards
Ninad
Maybe you are looking for
-
Help: Error on SELECT INTO TABLE2 FROM TABLE AS E1 JOIN...
Can anyone help? I am getting an error in my sql statement below: SELECT E1.COL1, E1.COL2, E2.COL3, E1.COL4 INTO TABLE2 FROM TABLE AS E1 JOIN TABLE AS E2 ON (E1.COL1 = '10000' AND E2.COL1 = '20000') OR (E1.COL1 = '20000' AND E2.COL1 = '10000') WHERE
-
Exclude duplicate or overlapping data when adding time fields
Post Author: Mark O CA Forum: Formula I am using Crytsal Reports XI. I have a several rows of start times, end times and total minutes. I would like to get a total time but some of the times are duplicates or overlapping each other. These duplicat
-
I just update my iphone 4. I did not change my password. I can get emails but cannot send them. How can I fix this?
-
Can't access scanner in CS5 after upgrade
I recently upgraded to CS5, and now my scanner doesn't show up in the "Import" menu. I copied the TWAIN plug-in from the CS4 Plugins folder, but it still doesn't show up. Any ideas?
-
OIF-Logout configuration- Need clarification
Could someone please highlight what are configurations need to enable logout for Oracle Identity Federation. Is it just as simple as invoke URL: /fed/user/logout. Should this URL be invoked from SP host or IdP host? Thanks