Input help for a field
Hi,
i need a posible values for a field of ztable in a report. here i used for AT SELECTION-SCREEN ON VALUE-REQUEST FOR z table field and FM ie F4IF_INT_TABLE_VALUE_REQUEST used to retrive the value. but that is not getting. c this code.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR parameter1.
select zfield from ztable into table int_tab_ztable.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'zfield'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = int_tab_ztable
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
when i press F4 that is displaing all fields of Ztable and when i select one value that is not returning back to parameter.
regards,
vijay
Hi vijay,
1. U have not given proper parameters
while calling the FM.
2. have a look at this (just copy paste)
3.
REPORT ABC.
DATA : BEGIN OF ITAB OCCURS 0,
UNAME LIKE USR01-BNAME,
END OF ITAB.
data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .
data : RETURN_wa LIKE DDSHRETVAL .
PARAMETERS : A(12) TYPE C.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR A.
ITAB-UNAME = 'U01'. APPEND ITAB.
ITAB-UNAME = 'U02'. APPEND ITAB.
ITAB-UNAME = 'U03'. APPEND ITAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'ITAB-UNAME'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'A'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = ITAB
FIELD_TAB = FTAB
RETURN_TAB = return_tab
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
break-point.
regards,
amit m.
Similar Messages
-
hi all,
i have two problems.
1) When i change input attiribute of input/output field is required , any user command (like exit or back command etc.) doesn't work.
2) i have two different field in my screen lifnr and belnr. but i can't use f4 search help for that fields. i have defined search help in my ztable (SE11) and element list-references (SE51) and fm F4IF_FIELD_VALUE_REQUEST and fm F4IF_INT_TABLE_VALUE_REQUEST. i have put process on valeu-request in flow logic. But when program run , skip this event.
all of them it doesn't work.
what should i do?
thaks for your helps.
Regards.Hi,
try the following code...and change the <.....> according to your program..Do the same thing for the second screen field also.
If you face same problem then please let me know.
module display_f4help input.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = '<tablename>'
fieldname = '<fieldname>'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = '<screen-field name>'
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
if sy-subrc <> 0.
message id sy-msgid type 'S' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif. " IF sy-subrc <> 0.
endmodule. " DISPLAY_F4HELP INPUT -
Input help for AUART field on the selection screen
Hi,
I need to create a Z search help for the Field AUART ( sales document type ) .
The search help should be created in this way :
i need to group these Document types under one name ( say SALO) ZCM1, ZCM2,ZDM1,ZDM2,ZRE1,ZRE2,ZS01,ZS02,ZS04.
Then i need to group these document types under another name ( say PRJO) ZCM3,ZDM3,ZS03.
Then i need to group both SALO and PRJO under one name 'BOTH'.
So my new search help will be SALO
PRJO
BOTH
If i select SALO , it should pull data from the Table for all the document types specified. Similarly for PRJO and BOTH .
Can anyone please advice me in this regard at the earliest
With Best Regards
Mamatha.Hi Mamtha,
Your Scenario can be achieved be defining Search help Exit available in the search Help creation Screen
Regards,
Kasi S -
Data no getting populated from input help to target field
Hi ,
I have made a input help for a field.
and have used the following code to populte the data into the input help.I am having the data displayed but the data doesnot get populated on selection.
CASE cs_dropdownlb_data-fieldname.
WHEN 'ZZSALSPOS'.
assign cs_dropdownlb_data to <extended_data>.
lv_display = is_screen_structure-zzdisplay.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'ZZSALSPOS'.
ls_fieldcat-headertitle = 'Broker Id'.
append ls_fieldcat to et_field_catalog.
ls_fieldcat-fieldname = 'ZZBROKER'.
ls_fieldcat-headertitle = 'Broker House Description'.
append ls_fieldcat to et_field_catalog.
CALL FUNCTION 'Z_SEARCH_HELP_SALES_ID'
EXPORTING
IV_DISPLAYALL = lv_display
IV_DIS_CHANNEL = '11'
IV_DIVISION = '00'
TABLES
T_COST_CAT_F4 = lt_posid
fldcat_add 'ZZSALSPOS'.
fldcat_add 'ZZBROKER'.
fldcat_add 'ZZREGION'.
fldcat_add 'ZZDIVISION'.
fldcat_add 'ZZSUBTEAM'.
fldcat_add 'ZZTEAM'.
SORT lt_posid BY zzsalspos zzbroker zzregion zzdivision zzsubteam zzteam.
CREATE DATA <extended_data>-data TYPE zcrmt_mkt_broker_tab.
ASSIGN <extended_data>-data->* TO <table>.
<table> = lt_posid.
I would sincerely appreciate and rewad if any solution could be suggested ....Thanking in advance...
NarsinghThe problem has been resolved
-
Static input help for DATS type
Hello,
I'd like to link static input help for screen field of DATS type. If I click on help linked to this screen field I get CONVT_NO_NUMBER error: 'Unable to interpret "=2" as a number.'
My steps:
- In Screen Painter I selected desired screen field and selected DATS type and "1 Show at selection" in its details.
- I defined global variable with same name as desired screen field
What's the problem?
Best regards,
Josef MotlHi,
do this way.....
first declare the variable in program as
1. data: date type sy-datum.
2. now go to your screen,(click on F6) use get from Program
now choose date form it , and say ok, now save it and activate it.
delete the old one..
now you will be able to get all the things which you want.
automatical validation also possible, and F4 also possible.
Regards
vijay -
Input help for a selection screen field
I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF. -
Hi ,i want provide a input help for a Selection input field
Hi Experts,
I want to provide a input help for field in selection-screen ,
this field is non primary key Custom Table(Z) selection input field .
how we can get ,f4 help for this field.
how to get f4 help Suppose field Link s_mtart-low,s_mtart-high,
What are the function moduled available for this >
Thanks in Advance.
Regards,
Hitu.Hi,
refer to below code.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-low.
**//To provide F4 help to S_USNAM-LOW
PERFORM f_f4help_usnam USING 'S_USNAM-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-high.
**//To provide F4 help to S_USNAM-HIGH
PERFORM f_f4help_usnam USING 'S_USNAM-HIGH'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-low.
**//To provide F4 help to S_WBS-LOW
PERFORM f_f4help_wbs USING 'S_WBS-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-high.
**//To provide F4 help to S_WBS-HIGH
PERFORM f_f4help_wbs USING 'S_WBS-HIGH'.
*& Form f_f4help_usnam
To provide F4 help to username
-->P_0019 text
*FORM f_f4help_usnam USING value(p_0019) TYPE any.
**// To retrieve username from mkpf.
SELECT bname
FROM usr01
INTO TABLE it_usnam.
SORT: it_usnam BY usnam.
DELETE ADJACENT DUPLICATES FROM it_usnam COMPARING usnam.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = c_retusnam
PVALKEY = ' '
dynpprog = c_dynpprog
dynpnr = c_dynpnr
dynprofield = p_0019
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = c_s
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = it_usnam
field_tab = it_usnam.
return_tab = l_it_ret
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
*ENDFORM. " f_f4help_usnam
*& Form f_f4help_wbs
To create F4 help for wbs element
-->P_0039 text
*FORM f_f4help_wbs USING value(p_0039) TYPE any.
**// To retrive wbs element from mseg
SELECT pspel
FROM pspl
INTO TABLE it_wbs.
SORT:it_wbs BY wbs.
DELETE ADJACENT DUPLICATES FROM it_wbs COMPARING wbs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = c_retwbs
PVALKEY = ' '
dynpprog = c_dynpprog
dynpnr = c_dynpnr
dynprofield = p_0039
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = c_s
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = it_wbs
FIELD_TAB =
return_tab = l_it_ret1
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
*ENDFORM. " f_f4help_wbs -
Input Help for TIME type field
I saw below discussion regarding a dropdown for a "TIME" type field.
Re: Time Search Help
It's a resuable component (that Thomas Jung created) and find it very slick.
I just couldn't make it to work. I'm getting a dump when I pressed the dropdown on the "TIME" field.
I was wondering, has anyone used this in conjunction with select-options (WDR_SELECT_OPTIONS) ?
I'm getting a system-dump, "Component usage VALUE_HELP does not exist". I double checked the name that I used on the "USED COMPONENT" tab and it is VALUE_HELP.
During method ADD_SELECTION_FIELD (for IF_WD_SELECT_OPTIONS) I'm using two parameters I_VALUE_HELP_TYPE = 'APPLDEV' and I_VALUE_HELP_ID = 'VALUE_HELP'.
Maybe I'm not using the right parameters ?
Anyway, I would appreciate if anyone could give me directions to correct the problem.Or maybe there is another and better way of having an input help for a "TIME" type field on select-option.
Thanks.
VicThat is because the TIME is a freely programmed value help and freely programmed value helps are not supported by the Select-Options component. That limited is listed in the online help:
Type of input help specified as type IF_WD_VALUE_HELP_HANDLER.
Note that only ABAP Dictionary-based input help and OVS input help are supported; freely programmable input help is not supported.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/bf07361248003de10000000a11466f/frameset.htm
The reason for this is that the freely programmed value help is accessed via a component usage. The Select-Options however are a separate component. They have no declaration to your components, component usages. Therefore they produce the error that the component usage doesn't exist - which is correct. It doesn't exist in the Select-Options Component. -
F4 help for a field in UI(CRM 5.1)
Hi All
Can anybody tell me how to do F4 help for a field in UI( CRM 5.1). scenario is given below.
I have 2 customer fields added to UI using EEW and have custom table for maintaining field values. need to add F4 help for field1 ( field1 and field2 values needs to be displayed in F4 help list) and field2 should get value when we hit the particular entry from field1 F4 help list.
thanks in advance.Hi,
You can implement the Get_V* method for the field1 attribute and use the following code to populate both field1 and field2 as output paramters for your F4 help.
DATA:
ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = '<STRUCT.field1>'.
ls_map-f4_attr = 'field1'.
APPEND ls_map TO lt_outmap.
ls_map-context_attr = '<STRUCT.field2>'.
ls_map-f4_attr = 'field2'.
APPEND ls_map TO lt_outmap.
<fill the lt_inmap (input parameters) as per your requirement>
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id = '<your search help id>'
iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping = lt_inmap
iv_output_mapping = lt_outmap.
Note: In your DDIC search help, define field1 and field2 as output parameters in SE11.
Reward if it works!
Thanks,
Sudipta. -
HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field = 'SETNAME'
dynpprog = v_repid
dynpnr = SY-DYNR
dynprofield = 'P_CCGRP'
value_org = 'S'
TABLES
value_tab = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES: BEGIN OF ty_match_nast,
objky TYPE na_objkey,
END OF ty_match_nast.
Data: it_match_nast TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
SELECT objky
FROM nast
INTO TABLE it_match_nast
WHERE kappl = c_ef
AND kschl = c_neu
AND usnam = wa_dypr_val-fieldvalue.
ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'. "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = it_dypr_val_h.
*Pass the values to f4 table
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = u2018OBJKY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_EBELN'
value_org = 'P'
TABLES
value_tab = it_match_nast
return_tab = it_return. -
i want to put F4 help for standard field FERTH in mm01 and mm02 ...
is there any way to put F4 help for this field..try this
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'BKPF'
fieldname = 'BUKRS'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = progname
dynumb = dynnum
translate_to_upper = 'X'
TABLES
dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
FROM BKPF
INTO CORRESPONDING FIELDS OF TABLE it_doc1
WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BELNR'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_BELNR'
value_org = 'S'
TABLES
value_tab = it_doc1.
ENDMODULE. " VALUE_BELNR INPUT -
F4 help for parameter field - no values defined in the database
Hi,
In the Selection screen, I have two fields,
One is for getting input for the month
Other one is for year
These two are created by using parameter statement
and it is not referring to any data base table fields.
parameters : p_bumon type bumon.
parameters : p_bdatj type bdatj.
At the selection screen i need input help for the month and year separately.
I cant use the function module becos no values r fetch from the tables.
or else to get the input help, can u please just me some predefined type declarations so that i can get by default the F4 help for this
or any other table which have the value range for only for the month and year.
Just it is created and the input values is passed to the function module and to calculate the number of days for that particular month and year.
i need this very urgently
Please suggest me in this , whether it is possible
Thankshi,
There is a event called
At selection-screen PROCESS ON VALUE-REQUEST for.......
In your case it can be :-
At selection-screen PROCESS ON VALUE-REQUEST for p_bumon .
< Block 1>
At selection-screen PROCESS ON VALUE-REQUEST for p_bdatj .
< Block 2>
In the block u can write the code.......
say for month u can write
parameters : p_month(2) type c.
Eg for month
At selection-screen PROCESS ON VALUE-REQUEST for P_MONTH.
data : begin of int_month occurs 0,
month(2) type c,
end of ont_month.
INT_MONTH-MONTH = '01'.
append INT_MONTH.
INT_MONTH-MONTH = '02'.
append INT_MONTH.
INT_MONTH-MONTH = '03'.
append INT_MONTH.
INT_MONTH-MONTH = '11'.
append INT_MONTH.
INT_MONTH-MONTH = '12'.
append INT_MONTH.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MONTH' Int tab field name
DYNPPROG = < program name>
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MONTH' Field wer u need F4 help
VALUE_ORG = 'S'
WINDOW_TITLE = Any description
TABLES
VALUE_TAB = INT_MONTH. Internal table name
please reward points if useful.... and mark it answered.....
thank you. -
How to provide F4 help for a field in table control
Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K -
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
Input help for cost center & WBS element not working
Hi ALL
We are using SRM 4.0 with backend ECC 5.0.
Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
I even applied SAP note 746788 for cost center search help.
Can you tell me if I have missed any config settings?
Thanks in advance
JagdishHi,
Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
Regards.
Vadim
Maybe you are looking for
-
Hi, We have a requirement wherein we want to pull the account balances in the following format: Co Cd GL A/C WBS ELEMENT WBS ELEMENT WBS ELEMENT GL A/C WBS ELEMENT WBS ELEMENT WBS ELEMENT
-
Contradiction form error in non interactive adobe forms.
HI All, I am woriking on a non interactive adobe forms generation program in ABAP. The program uses a variant and generate pdf forms for all the list items on the varient. Note: I am not using Webdynpro its the normal pdf generation. The problem I am
-
I got the upload, and after some tinkering with it, I got the Smart Lock to work and my phone's working perfectly. The problem I have is that it didn't do ANYTING AT ALL to give it the new 'look" Why is this? Can I fix it?
-
I have defined File System Repository (there are pdf files), how can I publish them in portal??
-
Hi all, I did a mega update to refresh my distro on my aspire one. It was a big jump from 2.35.x kernel and now I have an error starting X: [ 22.383] (EE) Error compiling keymap (server-0) [ 22.383] (EE) XKB: Couldn't compile keymap [ 22.383] XKB: Fa