Input Help for a InputField of type LAND1

Hi everybody,
I need to have an InputField in my WebDynpro connected with a element context in which I have an input help H_t005 but when the user select some nationality, the inputfield collect the LAND1 of the T005T instead of the NATIO. I should show the NATIO How could I fix it? I tried by code with the onEnter Action but this event isn´t thow when the user push the matchcode.
Thanks in advance.
Lore.

Hi Lorena,
The Input Help H_t005 collects LAND1 from table T005T ( a table) & not NATIO, which is not a table, but a Data Element only...
Also, please note that LAND1 is a char3 data Element, while NATIO is a data Element which resembles LANDX of table T005T. The search help T005T displays the vaule helps country texts from LANDX on basis of field LAND1.
Hope this solves your query.

Similar Messages

Static input help for DATS type

Hello,
I'd like to link static input help for screen field of DATS type. If I click on help linked to this screen field I get CONVT_NO_NUMBER error: 'Unable to interpret "=2" as a number.'
My steps:
- In Screen Painter I selected desired screen field and selected DATS type and "1 Show at selection" in its details.
- I defined global variable with same name as desired screen field
What's the problem?
Best regards,
Josef Motl

Hi,
do this way.....
first declare the variable in program as
1. data: date type sy-datum.
2. now go to your screen,(click on F6) use get from Program
now choose date form it , and say ok, now save it and activate it.
delete the old one..
now you will be able to get all the things which you want.
automatical validation also possible, and F4 also possible.
Regards
vijay

Input Help for TIME type field

I saw below discussion regarding a dropdown for a "TIME" type field.
Re: Time Search Help
It's a resuable component (that Thomas Jung created) and find it very slick.
I just couldn't make it to work. I'm getting a dump when I pressed the dropdown on the "TIME" field.
I was wondering, has anyone used this in conjunction with select-options (WDR_SELECT_OPTIONS) ?
I'm getting a system-dump, "Component usage VALUE_HELP does not exist". I double checked the name that I used on the "USED COMPONENT" tab and it is VALUE_HELP.
During method ADD_SELECTION_FIELD (for IF_WD_SELECT_OPTIONS) I'm using two parameters I_VALUE_HELP_TYPE = 'APPLDEV' and I_VALUE_HELP_ID = 'VALUE_HELP'.
Maybe I'm not using the right parameters ?
Anyway, I would appreciate if anyone could give me directions to correct the problem.Or maybe there is another and better way of having an input help for a "TIME" type field on select-option.
Thanks.
Vic

That is because the TIME is a freely programmed value help and freely programmed value helps are not supported by the Select-Options component. That limited is listed in the online help:
Type of input help specified as type IF_WD_VALUE_HELP_HANDLER.
Note that only ABAP Dictionary-based input help and OVS input help are supported; freely programmable input help is not supported.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/bf07361248003de10000000a11466f/frameset.htm
The reason for this is that the freely programmed value help is accessed via a component usage. The Select-Options however are a separate component. They have no declaration to your components, component usages. Therefore they produce the error that the component usage doesn't exist - which is correct. It doesn't exist in the Select-Options Component.

Input help for a selection screen field

I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?

PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF.

Selection-screen: Input help for VTWEG

Hello!
Can anybody help me with the following problem:
I have two select-options (VKORG and VTWEG) on my selection screen. Now there should be the possibility to restrict the values shown as input help for VTWEG after having selected a value for VKORG.
I've already tried to do this by using a matchcode object but for VKORG and VTWEG I was not able to find suitable search helps.
In my opinion this should be possible without using the "AT SELECTION-SCREEN ON VALUE-REQUEST FOR ...". If not, it would be interesting to getting to know your approaches to this task.
Thank you in advance!

you can refer to the following code
and you can write the code in the same way as per your requirement
*& Report ZRKTEST5 *
REPORT ZRKTEST5 .
DATA: PROGNAME TYPE SY-REPID,
 DYNNUM TYPE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES.
DATA: BEGIN OF T_T001L OCCURS 0,
 WERKS TYPE WERKS_D,
 LGORT TYPE LGORT_D,
 END OF T_T001L.
DATA: V_WERKS TYPE WERKS_D,
 V_LGORT TYPE LGORT_D.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_PLANT LIKE MSEG-WERKS,
 P_STOLOC LIKE MSEG-LGORT.
SELECTION-SCREEN END OF BLOCK B1.
INITIALIZATION.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_STOLOC.
CLEAR: FIELD_VALUE, DYNPRO_VALUES. REFRESH DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'P_PLANT'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = PROGNAME
 DYNUMB = DYNNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT WERKS LGORT INTO TABLE T_T001L FROM T001L WHERE WERKS = FIELD_Value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'P_STOLOC'
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'P_STOLOC'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = T_T001L.
START-OF-SELECTION.
WRITE:/ 'TEST F4 PROGRAM'.
END-OF-SELECTION.

reward points if helpfull
Regards
Vikure

Hi ,i want provide a input help for a Selection input field

Hi Experts,
I want to provide a input help for field in selection-screen ,
this field is non primary key Custom Table(Z) selection input field .
how we can get ,f4 help for this field.
how to get f4 help Suppose field Link s_mtart-low,s_mtart-high,
What are the function moduled available for this >
Thanks in Advance.
Regards,
Hitu.

Hi,
refer to below code.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-low.
**//To provide F4 help to S_USNAM-LOW
PERFORM f_f4help_usnam USING 'S_USNAM-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-high.
**//To provide F4 help to S_USNAM-HIGH
PERFORM f_f4help_usnam USING 'S_USNAM-HIGH'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-low.
**//To provide F4 help to S_WBS-LOW
PERFORM f_f4help_wbs USING 'S_WBS-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-high.
**//To provide F4 help to S_WBS-HIGH
PERFORM f_f4help_wbs USING 'S_WBS-HIGH'.
*&      Form f_f4help_usnam
    To provide F4 help to username
     -->P_0019   text
*FORM f_f4help_usnam USING    value(p_0019) TYPE any.
**// To retrieve username from mkpf.
SELECT bname
        FROM usr01
        INTO TABLE it_usnam.
SORT: it_usnam BY usnam.
DELETE ADJACENT DUPLICATES FROM it_usnam COMPARING usnam.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield            = c_retusnam
PVALKEY                = ' '
    dynpprog              = c_dynpprog
    dynpnr                = c_dynpnr
     dynprofield          = p_0019
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org            = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab           = it_usnam
    field_tab            = it_usnam.
return_tab             = l_it_ret
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_usnam
*&      Form f_f4help_wbs
    To create F4 help for wbs element
     -->P_0039   text
*FORM f_f4help_wbs USING    value(p_0039) TYPE any.
**// To retrive wbs element from mseg
SELECT pspel
        FROM pspl
        INTO TABLE it_wbs.
SORT:it_wbs   BY wbs.
DELETE ADJACENT DUPLICATES FROM it_wbs COMPARING wbs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
DDIC_STRUCTURE         = ' '
     retfield               = c_retwbs
PVALKEY                = ' '
   dynpprog               = c_dynpprog
   dynpnr                 = c_dynpnr
    dynprofield            = p_0039
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
    value_org              = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
   TABLES
     value_tab              = it_wbs
FIELD_TAB              =
return_tab             = l_it_ret1
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_wbs

Timeout on input help for variable

hi all,
in a selection screen of a report i have material and material type(navigational attribute of material) as input.
the report is built on cube.
only material is coming in cube.
when i click on input help for material type the screen hangs on the report times out.
whereas on the other hand if i am clicking help for material i am getting the values.
this variable is used in other queries on different infoprovider and is running fine there.
How do i get the values for input help for material type.
all the standard settings have been maintained(such as query filter selection etc...)
regards,
Arvind.

Hi,
Activate 0material masterdata.and Regenerate your query in RSRT.
If the problem still exists then debug the query using RSRT for the perticular field output.
Thanks
Kumar

Input help for cost center & WBS element not working

Hi ALL
We are using SRM 4.0 with backend ECC 5.0.
Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
I even applied SAP note 746788 for cost center search help.
Can you tell me if I have missed any config settings?
Thanks in advance
Jagdish

Hi,
Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
Regards.
Vadim

How to provide input help for a variant

Hi,
I have a parameter on the selection screen.
P_layout like disvariant-variant value check.
How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.

Hi,
You can create a serch help for the field and add it in program like:
P_layout like disvariant-variant match-code object 'Searche help name'.
then if you need to do any validation u can do it at selection screen:
like:
at selection-screen for P_layout.
if..conditions..
regards,

Restriction of input help for BPS exit variables

Hello,
In BPS 3.0b, I created BPS variables with user exit in order to restrict the values in the input help of a characteristic (related to the value selected by user of another variable for example).
In IP, I know that BPS variables are not used anymore and we have to create BI variables. But I don't know how to restrict the values of an input help in BI. I tried with the user exit RSR00001 but I didn't manage.
may be is there a possibility to reuse BPS variables ?
Thank you for your Help.
Catherine Bellec.

Hi Catherine,
could you please show me a sample how to restrict the input help for a variable in the user-exit?
Thank you in advance.
Best regards,
Andreas

HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

Hi,
I have requirement to Restrict the input Help for 0MATERIAL in the BPS Layout.
For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 ) then the system shuold check the 0MAT_SALES where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
I have Copied the standard Funtcion group "UPF_VARIABLE_USER_EXIT" to Z fucttion and have attached to Z Variabe as User Exit .
this Variable is Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
Please suggest if it is possible.
Regards,
Nilesh Labde

Hi Nilesh,
As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
There are two tables which can help you finding the value used in package for sales organisation:
1. UPC_PACKAGE
2. UPC_OPTIOS
How to use ?
From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
Hope this helps you
Mann

Input Help for Read Only Inputfield

I have a requirement where an inputfield should be grayed-out so the user can't simply type whatever they want into the field. However, the user should still be able to change the value of the inputfield via the input help (F4). After searching around in the forums, I see that the only way to do this is to use a custom input help (as opposed to DDIC or OVS). I've done that, and it works fine when the inputfield is open. However, as soon as I set the inputfield to "Read Only", the input help button goes away.
How do I get the input help button to stay even though the field is set to "Read Only"?
Thanks,
Tom Peng

Hi,
I have a requirement where an inputfield should be grayed-out so the user can't simply type whatever they want into the field.
If the user shouldnot enter the data what ever he wants in input field ,you can use foreign key check ,
So that it throws an error message, when use enters the data other than the values in F4 help.
So with out making the field read only you can solve the problem.
Priya

Input help for screen fields

hi all,
i have two problems.
1) When i change input attiribute of input/output field is required , any user command (like exit or back command etc.) doesn't work.
2) i have two different field in my screen lifnr and belnr. but i can't use f4 search help for that fields. i have defined search help in my ztable (SE11) and element list-references (SE51) and fm F4IF_FIELD_VALUE_REQUEST and fm F4IF_INT_TABLE_VALUE_REQUEST. i have put process on valeu-request in flow logic. But when program run , skip this event.
all of them it doesn't work.
what should i do?
thaks for your helps.
Regards.

Hi,
try the following code...and change the <.....> according to your program..Do the same thing for the second screen field also.
If you face same problem then please let me know.
module display_f4help input.
call function 'F4IF_FIELD_VALUE_REQUEST'
 exporting
 tabname = '<tablename>'
 fieldname = '<fieldname>'
 dynpprog = sy-cprog
 dynpnr = sy-dynnr
 dynprofield = '<screen-field name>'
 exceptions
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 others = 5.
if sy-subrc <> 0.
 message id sy-msgid type 'S' number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif. " IF sy-subrc <> 0.
endmodule. " DISPLAY_F4HELP INPUT

BI Content Input Help Not Working on Object Type View

In the BI Content area, if I go to the Object Type View and click on 'Select Objects' for Datasources or InfoPackages, I will not get the Input Help screen.
I am running SAP BI 7.0 Level 0013. BI Content is version 7.03 Level 0005
I am sure there is a note to fix this, but I have not been able to find it!
Thanks

All of the correct Source Systems Assignments were not selected.

Disable input help for a webdynpro field in ESS

I need to disable the drop down capability of a field in ESS (field is "Bank Key" available in the ESS page "Bank Information"). So I need the field to stay visible and ready for input... I just want the input help to not show up (the entries in the input help are not applicable to the user and they confuse them). how can I do that?
Tiberiu
Edited by: Tiberiu Sasu on Apr 27, 2010 11:25 PM

Just throwing ideas around...
you could create a custom field which is of the same length as bank key - but no value helps etc assigned to it. Add this into the CI_append structure of the bank details structure used by ESS.
Then in the inbound and outbound mappings - UI conversion class BAdIs move the bank key to and from this plain text field and into the "real" bank key field.
You could then "decorate" the iView with the additional customer field and hide the standard bank key field.
Sounds like a lot of bother! But depends on how much you dislike modifying standard WD Java apps (personally I'd put that in the definitely worthwhile basket - maintenance after support packs on WD Java is not fun!)
Cheers,
Chris

Input Help for a InputField of type LAND1

Similar Messages

Maybe you are looking for