Input help for a selection screen field

I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?

PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF.

Similar Messages

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Can we create serach help for a selection screen field

Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
Mave

AT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
        DESCR LIKE BKPF-BKTXT,
        END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'DESCR'
            DYNPPROG    = gd_repid
            DYNPNR      = '1000'
            DYNPROFIELD = 'paymeth'
            VALUE_ORG   = 'S'
            DISPLAY     = ' '
       TABLES
            value_tab   = DESCR_TAB.
endform.
Svetlin

F4 help for the selection screen field designed in screen painter

Hi all,
I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
Thanks & Regards,
Giri.

Hi,
You must use the correct event to meet ur requirement use POV event instead of PAI event.
for more clarification and example program see below the demo program
DEMO_DYNPRO_F4_HELP_DYNPRO
DEMO_DYNPRO_F4_HELP_MODULE
Cheers
fareed

How to link a search help to a selection screen field

Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
Nibha

Hello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF

Hi ,i want provide a input help for a Selection input field

Hi Experts,
I want to provide a input help for field in selection-screen ,
this field is non primary key Custom Table(Z) selection input field .
how we can get ,f4 help for this field.
how to get f4 help Suppose field Link s_mtart-low,s_mtart-high,
What are the function moduled available for this >
Thanks in Advance.
Regards,
Hitu.

Hi,
refer to below code.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-low.
**//To provide F4 help to S_USNAM-LOW
PERFORM f_f4help_usnam USING 'S_USNAM-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-high.
**//To provide F4 help to S_USNAM-HIGH
PERFORM f_f4help_usnam USING 'S_USNAM-HIGH'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-low.
**//To provide F4 help to S_WBS-LOW
PERFORM f_f4help_wbs USING 'S_WBS-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-high.
**//To provide F4 help to S_WBS-HIGH
PERFORM f_f4help_wbs USING 'S_WBS-HIGH'.
*&      Form f_f4help_usnam
    To provide F4 help to username
     -->P_0019   text
*FORM f_f4help_usnam USING    value(p_0019) TYPE any.
**// To retrieve username from mkpf.
SELECT bname
        FROM usr01
        INTO TABLE it_usnam.
SORT: it_usnam BY usnam.
DELETE ADJACENT DUPLICATES FROM it_usnam COMPARING usnam.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield            = c_retusnam
PVALKEY                = ' '
    dynpprog              = c_dynpprog
    dynpnr                = c_dynpnr
     dynprofield          = p_0019
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org            = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab           = it_usnam
    field_tab            = it_usnam.
return_tab             = l_it_ret
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_usnam
*&      Form f_f4help_wbs
    To create F4 help for wbs element
     -->P_0039   text
*FORM f_f4help_wbs USING    value(p_0039) TYPE any.
**// To retrive wbs element from mseg
SELECT pspel
        FROM pspl
        INTO TABLE it_wbs.
SORT:it_wbs   BY wbs.
DELETE ADJACENT DUPLICATES FROM it_wbs COMPARING wbs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
DDIC_STRUCTURE         = ' '
     retfield               = c_retwbs
PVALKEY                = ' '
   dynpprog               = c_dynpprog
   dynpnr                 = c_dynpnr
    dynprofield            = p_0039
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
    value_org              = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
   TABLES
     value_tab              = it_wbs
FIELD_TAB              =
return_tab             = l_it_ret1
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_wbs

Standard input help in zreport selection screen

Hi All,
   I am having a selection sceen like S_PERNR FOR PA0001-PERNR.
   when I put f4 help then it is comming right and showing the value
of personnel number which is correct.
   But when you execute the transaction PA30 and select f4 help in
personnel number then it iscomming with window and all information
is cooming. I want to put that help on my selection screnn S_PERNR FOR PA0001-PERNR.
is it possible? Please give me the solution.
Thanks,
Rakesh

Yes, i am getting input help for position in that program also in ECC 6.0 version.
SELECT-OPTIONS:pchobjid FOR pchdy-objid_seq.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-high.
rhx-f4-objid-high pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
Which version are you working ?
Note: Plz post only one question per thread.

F4 help for a selection screen parameter with filename created dynamically

Hi All,
          I have a requirement where in an F4 help should be present for a selection screen parameter. After selecting the filepath and clicking OK button on the Dialog, the filename should be dynamically get created in the selection screen parameter field. For example:
if the path is D:\DOCS then at the end of DOCS the filename should automatically get populated.
Like below string:
D:\DOCS\new.txt
Is there any function module or method which does this kind of activity.
Thanks in advance,
Deepak

this code will help:
FORM get_filename CHANGING p_filename.
DATA      : lv_filename TYPE string,
              lv_rc TYPE i,
              li_filetable TYPE filetable.
CONSTANTS : lc_fname TYPE string VALUE 'ZRPP4000.XLS',
              lc_fpath TYPE string VALUE 'C:\',
              lc_extn TYPE string VALUE 'XLS'.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      default_filename        = lc_fname
      initial_directory       = lc_fpath
      default_extension       = lc_extn
    CHANGING
      file_table              = li_filetable
      rc                      = lv_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc = 0 .
    READ TABLE li_filetable INTO lv_filename INDEX 1.
    IF sy-subrc = 0.
      p_filename = lv_filename.
    ENDIF.
ENDIF.
REFRESH li_filetable.
CLEAR:lv_filename.
ENDFORM.                    "get_filename
" p_filename is selection screen parameter

F4 help FOR A SELECT OPTION FIELD

Hi,
Can anyone tell how to provide F4help for a select-option field?
Regards,
Hema

Hello,
If you created a search help in the DDIC...Then check the check box EXPORt parameter for one of the fields
If you used the function module Make sure you pass the correct values..Also the field name in CAPITAL letters..
Check this code..
TABLES: T005T.
DATA: BEGIN OF t_t005 OCCURS 0,
        land1 TYPE t005-land1,
      END OF t_t005.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(6) v_text FOR FIELD P_LAND1.
PARAMETERS: p_land1 TYPE t005-land1.
SELECTION-SCREEN COMMENT 13(35) v_text1.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_text = 'Country'.
v_text1 = ' '.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_land1.
REFRESH: t_t005.
SELECT land1
         INTO TABLE t_t005
         FROM t005.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
*            DDIC_STRUCTURE   = 'T005'
            PVALKEY          = ' '
            retfield         = 'LAND1'
            dynpprog         = sy-repid
            DYNPNR           = sy-dynnr
            dynprofield      = 'P_LAND1'
            callback_program = sy-repid
            value_org        = 'S'
       TABLES
            value_tab        = t_t005
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS           = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Deepu.K

How to assign F1 help to the selection screen fields

Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha Singuru

Hi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END   OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
    WHEN 'HELP'.
      CASE CURSORFIELD.
        WHEN 'S_MATNR-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MATNR-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
        WHEN 'S_MTART-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MTART-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
      ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter

Drop down box for the selection screen field of the classical report

Hi all.
i want to have the drop down list to choose from, for the region(table:zbwcntry-field:zregion1) on the selection screen.
what is to be added to the code for this requirement.Also,please note that this is the classical report.
thanks for this answered.

hi,
data : gv_name TYPE vrm_id,        " used for vrm id
           gv_repid TYPE sy-repid,      " used to hold program name
work area to provide drop down list
DATA : gs_value TYPE vrm_value,
Internal table to provide drop down list
DATA : gt_values TYPE vrm_values,
PARAMETER : p_run(12) TYPE c AS LISTBOX VISIBLE LENGTH 12
                                 DEFAULT 'DEFAULT' OBLIGATORY,
CONSTANTS : gc_run(5) TYPE c VALUE 'P_RUN',    "constant for run mode
gv_name = gc_run.
gs_value-key = gc_v1.
gs_value-text = text-010.
APPEND gs_value TO gt_values.
gs_value-key = gc_v2.
gs_value-text = text-011.
APPEND gs_value TO gt_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = gv_name
      values          = gt_values
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this is helpful.
Rgds.,
subash

Attach search help to a selection screen field

Hi All,
I have a parameter p_kschl like nast-kschl in my selection screen.
My requirement is whenever sales org equals to '3' i need to set p_kschl
default ZE02 and make a picklist available with ZE02 and ZE04 available with the descriptions
How to make that picklist having ZE02 and ZE04 with descriptions.

Yes, then you will use a FM like [F4IF_INT_TABLE_VALUE_REQUEST|https://forums.sdn.sap.com/search.jspa?objID=c42&q=F4IF_INT_TABLE_VALUE_REQUEST]
But as this event is in the POV, data may have been changed to screen and not yet in the program, so you will need to use FM [DYNP_VALUES_READ|https://forums.sdn.sap.com/search.jspa?threadID=&q=DYNP_VALUES_READ&objID=c42&dateRange=last90days&numResults=15&rankBy=10001] to get current value of some fields on the screen (sales org.). (and [DYNP_VALUES_UPDATE|https://forums.sdn.sap.com/search.jspa?threadID=&q=DYNP_VALUES_UPDATE&objID=c42&dateRange=last90days&numResults=15&rankBy=10001] if you want to change the current value of another field on screen)
Regards,
Raymond

Default Value for a selection screen field

Hi Experts,
I am having a selection screen with a date field i am defaulting the date field to sy-datum but i also have a option of changing the date field value.
The issue is i have defaulted the date field value in PBO event,so when i change my field value in selection screen every time the defaulted value is appearing instead of my new changed value.
Plzz suggest a solution.

Hi ,
       Actualy u should set the default value at the time of selection screen, but now from the same logic try to write like
   If Date is initial.
     data = sy-datum.
    endif.
in ur PBO
Try this.
THank
-Anmol
Hi Experts,
I am having a selection screen with a date field i am defaulting the date field to sy-datum but i also have a option of changing the date field value.
The issue is i have defaulted the date field value in PBO event,so when i change my field value in selection screen every time the defaulted value is appearing instead of my new changed value.
Plzz suggest a solution.

F1 help for SRM portal Screen fields

HI Friends,
Is there any way find the use of particular fields which displayed in SRM Portal(Like we do in ECC by pressing F1)
Pls suggest some way to understand the purpose of all fields getting displayed in SRM portal..(like usae all fileds available in Shopping cart,PO,GC,Contract,SOC etc)
Thanks,
San

Hi Sankar
No F1 help option like that available ..you may need to go back to the BADI and depending on which structure it is which you can see in DOC_CHANGE Badi you will see the description ..of those fields
which can help you to udnerstand a bit more on what the field is about ..
Since the fields are generally self explanatory and intuitive SAP has probably not provided an option of F1` help like that in MM .
Regards
Vinita

F4 HELP FOR ONLY SELECTED FIELD VALUES

Hi,
I have to display the F4 help for the selection screen field parameter. From the ICON table, I need to display the field ID values. In the ICON table, I have lot of field values for the field ID, but I need to display only 3 field values into F4 help.(like say @07@, @08@, @0A@ only at the F4 help).
Thanks in advance.
Regards
Ramesh mavilla.

Hi,
See the follwoing code example
REFRESH: I_DYNPREAD .
CLEAR : I_DYNPREAD .
I_DYNPREAD-FIELDNAME = 'P_KAPPL'.
APPEND I_DYNPREAD.
CLEAR I_DYNPREAD.
L_REPID = SY-REPID .
L_DYNNR = '1000' .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = L_REPID
DYNUMB = L_DYNNR
TABLES
DYNPFIELDS = I_DYNPREAD.
IF SY-SUBRC EQ 0.
READ TABLE I_DYNPREAD INDEX 1.
P_KAPPL = I_DYNPREAD-FIELDVALUE.
ENDIF.
REFRESH: I_DYNPREAD .
CLEAR : I_DYNPREAD .
REFRESH: I_KSCHL.
TRANSLATE P_KAPPL TO UPPER CASE.
TRANSLATE P_KVEWE TO UPPER CASE.
SELECT KAPPL KVEWE KSCHL VTEXT FROM T685T
INTO CORRESPONDING FIELDS OF TABLE I_KSCHL
WHERE KAPPL = P_KAPPL
AND KVEWE = P_KVEWE
AND SPRAS = 'EN'.
IF SY-SUBRC <> 0.
MESSAGE E001(ZZ) WITH 'No Condition Type exist for Application'.
*p_kappl ' and Usage' p_kvewe.
ELSE.
REFRESH: I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KAPPL'.
I_FIELDS-SELECTFLAG = ''.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KVEWE'.
I_FIELDS-SELECTFLAG = ''.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KSCHL'.
I_FIELDS-SELECTFLAG = 'X'.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'VTEXT'.
I_FIELDS-SELECTFLAG = ' '.
APPEND I_FIELDS.
CLEAR: V_SEL.
CALL FUNCTION 'HELP_VALUES_GET_NO_DD_NAME'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
SELECTFIELD = 'KSCHL'
TITEL = 'Cond Type'
IMPORTING
IND =
SELECT_VALUE = V_SEL
TABLES
FIELDS = I_FIELDS
FULL_TABLE = I_KSCHL
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF. "SY-SUBRC.
And also go throw the link which it clears more about F4
Check the link below for creating collective search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
Check the ink below for creating elementary search help
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee5f446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
<b>Reward with points if helpful.</b>
Regards,
Vijay

Input help for a selection screen field

Similar Messages

Maybe you are looking for