Input help takes longer times for the planning var in Portal

Hi Gurus,
I had a planning report with planning function copy historic demand and some planning filters forecast analysis ID.When i'm executing the report in portal by providing the direct values to   forecast analysis ID,but when i press F4 button the screen keep on refreshing.
Regards,
rambabu

Dear Rambabu
Have you maintained the selection criteria for the infoobject as Posted values or from master data, it will depend on this how fast the selection retrieves
Regards
Gajesh

Similar Messages

  • My folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    my folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh

    Don't know if that would be a failing hard drive, but it may be that you are out of available space. How much hard drive space do you have available? Please highlight the Macintosh HD icon and then press Command and I for a get info window. Once open, please copy and post the following:
    Capacity:
    Used:
    Available:
    Mac OS requires a minimum of 10 - 15% of total hard drive space available and empty at all times in order to operate properly.

  • HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

    Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

    The "issues" you've raised are nothing to do with the iCloud service.
    No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
    The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

  • Takes long time for shutdown after adding to domain

    Hi,
    Workstation OS - Window 7
    Domain Controller OS - Window server 2008 R2 standard
    Following thing i have measure with Stopwatch.
    1) When the laptop is in workgroup, it takes just 17 second for shutdown.
    2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
    Why the shutdown time increased so much?
    Do you have any idea?
    Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
    There is no logoff scripts / gpo's as well as we don't have roaming profiles.
    Please advice.
    Thanks & Regards,
    Param
    www.paramgupta.blogspot.com

    Hi,
    To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
    times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
    To get the installer, you have to install the Windows 7 SDK.
    Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
    http://www.microsoft.com/en-us/download/details.aspx?id=3138
    For shutdown tracing:
    Run command:
    xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
    Collect logs and post them for further troubleshooting.
    For more information please refer to following MS articles:
    Long Shutdown Time on Windows 7 Ultimate x64
    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
    Long shutdown time on Windows 7 64 bit laptop
    http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
    Lawrence
    TechNet Community Support

  • Validate/madatory  in order to avoid  long time for the program execution.

    Below is my selction screen.  I would like to do validations for specific fields to make them mandatory fields   as well.
    Could you please suggeste me what are the fields that I can validate/madatory  in order to avoid  long time  for the program  run.
    *Program selections
    SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-h01.
    SELECT-OPTIONS : o_as4loc   FOR v_as4local,
                     o_ddlang   FOR ddlanguage,
                     o_vkorg    FOR vkorg     MEMORY ID vko,
                     o_auart    FOR auart              MEMORY     ID aat,
                     o_fdnam    FOR fdnam,
                     o_spart    FOR spart   MEMORY ID spa,
                     o_vbeln    FOR vbeln            MEMORY ID aun,
                     o_posnr    FOR posnr,
                     o_matnr    FOR matnr            MEMORY ID mat,
                     o_pltyp    FOR pltyp            MEMORY ID vpl,
                     o_j_3ar    FOR j_3arqda,
                     o_kzr00    FOR kbetr,                       " -ZR00
                     o_kalsm    FOR kalsmasd,
                     o_kmwst    FOR kbetr,                       " -MWST
                     o_kbmen    FOR kbmeng,
                     o_land1    FOR land1            MEMORY ID LND
    SELECTION-SCREEN  : END OF BLOCK b1.
    Thanks in advance.

    Hi,
    Make key fields as well as fields on which there in an index in the database table mandatory.
    Regards,
    Abhijit G. Borkar

  • When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    Servers have been swamped. Keep trying and be patient. Wait a few days.

  • Report takes long time for few records

    hi frends,
    I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the  report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
    bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
    Thanks
    Mithun

    hi sabhajit,
    i have already checked the sql query it is taking less then seconds.
    any other steps u want me to check then pls let me know?
    thanks mithun

  • Takes Long time for Data Loading.

    Hi All,
    Good Morning.. I am new to SDN.
    Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
    Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
    Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
    And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
    Can you please suggest how to improve the performance of dataloading on this Case.
    Thanks & Regards,
    Siva.

    Hi....
    Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
    If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
    Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
    Also check System log in SM21............and shortdumps in ST04........
    Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
    Regards,
    Debjani......

  • Bex Reports takes long time for filtering

    Hi,
    We have gone live in last December.And already our inventory cube contains some 15 million records,sales cube contains 12 million records.
    Is there any specific limit to number of records.Because while doing filtering in inventory report or sales reports it is taking very  long time.
    Is there any alternative or we should delete some the data from the cube.
    for filtering any value it is taking long time than running the query itself.
    Pls help...
    Regards,
    viren.

    Hi Viren,
    I hope a cube can perform well even at 100 million records with some performance tunning. So i absolutely doubt why it is taking long time for your cube with just 10-15 million records.
    Do a performance analysis and check whether aggregates will be helpful or not.
    Check the below link for how to do a performance analysis.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
    Hope it helps.
    Thx,
    Soumya

  • Take long time for loading

    Hi Experts,
    One of my data target (Data comming from another ODS) is taking long time for loading, basically it takes below 10 times only, but today it is running from last 40 minesu2026
    In Status Tab it showing....
    Job termination in source system
    Diagnosis
    The background job for data selection in the source system has been terminated. It is very likely that a short dump has been logged in the source system
    Procedure
    Read the job log in the source system. Additional information is displayed here.
    To access the job log, use the monitor wizard (step-by-step analysis)  or the menu path <LS>Environment -> Job Overview -> In Source System
    Error correction:
    Follow the instructions in the job log messages.
    Can anyone please solve my problem.
    Thanks in advance
    David

    Hi Experts,
    Thanks for your answers, and my load failed when the data comes from one ODS to another ODS. find the below job log
    Job started
    Step 001 started (program SBIE0001, variant &0000000007169, user ID RCREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 8ZPP_OP3
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 20006838008                             *
    abap/heap_area_total.......... 20006838008                             *
    abap/heaplimit................ 83886080                                *
    zcsa/installed_languages...... ED                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 5000000                                 *
    ztta/roll_extension........... 4294967295                              *
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:31:55, End = 06.09.2010 01:31:55
    Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 2 in task 0004 (2 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:00, End = 06.09.2010 01:32:00
    Asynchronous transmission of info IDoc 4 in task 0005 (2 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 3 in task 0006 (3 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:04, End = 06.09.2010 01:32:04
    Asynchronous transmission of info IDoc 5 in task 0007 (3 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 4 in task 0008 (4 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:08, End = 06.09.2010 01:32:08
    Asynchronous transmission of info IDoc 6 in task 0009 (4 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 5 in task 0010 (5 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:11, End = 06.09.2010 01:32:11
    Asynchronous transmission of info IDoc 7 in task 0011 (5 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Asynchronous send of data package 13 in task 0026 (6 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:01, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:44, End = 06.09.2010 01:32:45
    tRFC: Data Package = 8, TID = 0AEB465C00AE4C847CEA0070, Duration = 00:00:17,
    tRFC: Start = 06.09.2010 01:32:29, End = 06.09.2010 01:32:46
    Asynchronous transmission of info IDoc 15 in task 0027 (5 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 14 in task 0028 (6 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:48, End = 06.09.2010 01:32:48
    tRFC: Data Package = 9, TID = 0AEB465C00AE4C847CEF0071, Duration = 00:00:18,
    tRFC: Start = 06.09.2010 01:32:33, End = 06.09.2010 01:32:51
    Asynchronous transmission of info IDoc 16 in task 0029 (5 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 15 in task 0030 (6 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:52, End = 06.09.2010 01:32:52
    Asynchronous transmission of info IDoc 17 in task 0031 (6 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 16 in task 0032 (7 parallel tasks)
    tRFC: Data Package = 10, TID = 0AEB465C00684C847CF30070, Duration = 00:00:18,
    tRFC: Start = 06.09.2010 01:32:37, End = 06.09.2010 01:32:55
    tRFC: Data Package = 11, TID = 0AEB465C02E14C847CF70083, Duration = 00:00:17,
    tRFC: Start = 06.09.2010 01:32:42, End = 06.09.2010 01:32:59
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:32:56, End = 06.09.2010 01:32:56
    Asynchronous transmission of info IDoc 18 in task 0033 (5 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 17 in task 0034 (6 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:33:00, End = 06.09.2010 01:33:00
    tRFC: Data Package = 12, TID = 0AEB465C00AE4C847CFB0072, Duration = 00:00:16,
    tRFC: Start = 06.09.2010 01:32:46, End = 06.09.2010 01:33:02
    Asynchronous transmission of info IDoc 19 in task 0035 (5 parallel tasks)
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
    Result of customer enhancement: 100,000 records
    Asynchronous send of data package 18 in task 0036 (6 parallel tasks)
    tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
    tRFC: Start = 06.09.2010 01:33:04, End = 06.09.2010 01:33:04
    Asynchronous transmission of info IDoc 20 in task 0037 (6 parallel tasks)
    ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    Job cancelled
    Thanks
    Daivd
    Edited by: david Rathod on Sep 6, 2010 12:04 PM

  • Adobe form take long time for Check/Send at portal

    Hi Experts
    We have a form at Portal, which take long time when we click on Check to validate the form, its taking around 3 mins.
    where as other forms are not taking this much time. Can anyone help us on this issue.
    Thanks
    Sajal

    Hi Sajal,
    did you already contact your basis-guys to trace the performance of the ADS itself?
    Sounds to me, that the connection of the portal is not that good and maybe this is one of the problems.
    Also check on the interface to the form. what takes the time... the driver-program fetching the data or even the form itself.
    Additional to that you should have a look inside the form and see how much scripting is inside. Sometimes there is a lot of unnecessary source inside and out of that, you didn't share the form (if it is a SAP-delivery) I cannot get more in detail with my answer here.
    Hope it gives you a clue where to start with your journey.
    ~Florian
    PS: If you use the search with keywords "ADS + trace" you find a lot of useful information.

  • Takes a long time for the status of the dshboard to go from unknown to display the information

    been trouble shooting a issue with this server where its running fine for a few weeks then it will slow down shares will stop working or print services, eventually has to reboot it, a few times it wouldn't reboot and would just hang and had to be hard shut
    down.
    ran through diagnostics with Dell and Dset tool they didn't see anything wrong, we updated a few things and did the offline diag from the boot up and found a RAM issue, we pulled the ram out blew out the slots plugged it back in and everything has been fine.
    but seems like there is some of the issues creeping back in, Dell says its not hardware so looking at OS issues
    its a 2012 std server Power edge R520 Xeon E5-2420 with 32 gigs of ram, its a file server print server AD, only server for this construction company of about 20 users.
    when ever I load up the server manager it shows for about 5 min or longer unknown for everything, after 5-10 min some things fill in till its full, also the Volume shadow copy service keeps stopping and flagging it red in the server manager. have run sfc
    and not really seeing what could be wrong, everything shows fine,
    have not had any complaints about speed or not being able to access the shares since we did the downtime and reset the ram in the slots but when I even try to get to something like updates from control panel it takes about 15 min or so for the application
    to load up, but other things are fast like normal, its somewhat selective.
    any ideas?
    thank you!
    Brandon Dillon

    Hi Brandon Dillon,
    On current situation, please logon the server and open Server Manager. Then navigate to BEST PRACTIES ANALYZER and start BPA Scan. Please monitor the result. Meanwhile, please check
    if find some events which may be related to this issue. Those may help us to go further analyze.
    In addition, please
    perform a clean boot on the server. Then open Server Manager and check if this issue still exists.
    If any update, please feel free to l tem know.
    Hope this helps.
    Best regards,
    Justin Gu

  • DrawImage takes long time for images created with Photoshop

    Hello,
    I created a simple program to resize images using the drawImage method and it works very well for images except images which have either been created or modified with Photoshop 8.
    The main block of my code is
    public static BufferedImage scale(  BufferedImage image,
                                          int targetWidth, int targetHeight) {
       int type = (image.getTransparency() == Transparency.OPAQUE) ?
                        BufferedImage.TYPE_INT_RGB :
                        BufferedImage.TYPE_INT_RGB;
       BufferedImage ret = (BufferedImage) image;
       BufferedImage temp = new BufferedImage(targetWidth, targetHeight, type);
       Graphics2D g2 = temp.createGraphics();
       g2.setRenderingHint
             RenderingHints.KEY_INTERPOLATION, 
             RenderingHints.VALUE_INTERPOLATION_BICUBIC
       g2.drawImage(ret, 0, 0, targetWidth, targetHeight, null);
       g2.dispose();
       ret = temp;
       return ret;
    }The program is a little longer, but this is the gist of it.
    When I run a jpg through this program (without Photoshop modifications) , I get the following trace results (when I trace each line of the code) telling me how long each step took in milliseconds:
    Temp BufferedImage: 16
    createGraphics: 78
    drawimage: 31
    dispose: 0
    However, the same image saved in Photoshop (no modifications except saving in Photohop ) gave me the following results:
    Temp BufferedImage: 16
    createGraphics: 78
    drawimage: 27250
    dispose: 0
    The difference is shocking. It took the drawImage process 27 seconds to resize the file in comparison to 0.78 seconds!
    My questions:
    1. Why does it take so much longer for the drawImage to process the file when the file is saved in Photoshop?
    2. Are there any code improvements which will speed up the image drawing?
    Thanks for your help,
    -Rogier

    You saved the file in PNG format. The default PNGImagReader in core java has a habit of occasionally returning TYPE_CUSTOM buffered images. Photoshop 8 probably saves the png file in such a way that TYPE_CUSTOM pops up more.
    And when you draw a TYPE_CUSTOM buffered image onto a graphics context it almost always takes an unbearably long time.
    So a quick fix would be to load the file with the Toolkit instead, and then scale that image.
    Image img = Toolkit.getDefaultToolkit().createImage(/*the file*/);
    new ImageIcon(img);
    //send off image to be scaled A more elaborate fix involves specifying your own type of BufferedImage you want the PNGImageReader to use
    ImageInputStream in = ImageIO.createImageInputStream(/*file*/);
    ImageReader reader = ImageIO.getImageReaders(in).next();
    reader.setInput(in,true,true);
    ImageTypeSpecifier sourceImageType = reader.getImageTypes(0).next();
    ImageReadParam readParam = reader.getDefaultReadParam();
    //to implement
    configureReadParam(sourceImageType, readParam);
    BufferedImage img = reader.read(0,readParam);
    //clean up
    reader.dispose();
    in.close(); The thing that needs to be implemented is the method I called configureReadParam. In this method you would check the color space, color model, and BufferedImage type of the supplied ImageTypeSpecifier and set a new ImageTypeSpecifier if need be. The method would essentially boil down to a series of if statements
    1) If the image type specifier already uses a non-custom BufferedImage, then all is well and we don't need to do anything to the readParam
    2) If the ColorSpace is gray then we create a new ImageTypeSpecifier based on a TYPE_BYTE_GRAY BufferedImage.
    3) If the ColorSpace is gray, but the color model includes alpha, then we need to do the above and also call seSourceBands on the readParam to discard the alpha channel.
    3) If the ColorSpace is RGB and the color model includes alpha, then we create a new ImageTypeSpecifier based on an ARGB BufferedImage.
    4) If the ColorSpace if RGB and the color model doesn't include alpha, then we create a new ImageTypeSpecifier based on TYPE_3BYTE_BGR
    5) If the ColorSpace is not Gray or RGB, then we do nothing to the readParam and ColorConvertOp the resulting image to an RGB image.
    If this looks absolutely daunting to you, then go with the Toolkit approach mentioned first.

  • Long time for loading Planning books/data views

    Hi
    Could someone throw some pointers/solutions for extremely horrible time taken for a planning view (data view) to load and populate for certains selection profiles that already have large number of trasactional records. In my case it is specifically the run time dumps thrown for a popular combination (large number of transactions).
    Urgent suggestions/solutions required. Pls. call 9923170825. India, if you are lazy enough to type it out. or just type in some key words, tcodes etc.
    Thanks

    I hope you dont have too many macros hogging the memory in interactive book. The other thing is to be on the latest LC build. Also try to have default unit of measures (keep the dataview settings for UoM blank).
    Can you confirm if you build the TLB view brand new in 5.0 or did you do some migration of the books ? The first time opening of book takes longer due to some compilation of certain objects. in SM50, try to identify where the process takes longest - whether it is at client end, at the DB procedure of LC or at application level.

  • Takes long time for songs to start playing

    I have window 7. I have problems when i try to play a song it takes a long time and it displays on the screen " loading URL". Why does it take so long. I have trie itunes versions 8-10.5. The only itunes that it doesn't happen in is itunes 7. Itunes also freezes up sometimes. Thanks in advance.

    Hi,
    To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
    times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
    To get the installer, you have to install the Windows 7 SDK.
    Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
    http://www.microsoft.com/en-us/download/details.aspx?id=3138
    For shutdown tracing:
    Run command:
    xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
    Collect logs and post them for further troubleshooting.
    For more information please refer to following MS articles:
    Long Shutdown Time on Windows 7 Ultimate x64
    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
    Long shutdown time on Windows 7 64 bit laptop
    http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
    Lawrence
    TechNet Community Support

Maybe you are looking for

  • Satellte L40 - After XP Setup blue screen Error

    Hi, I browsed this forum and the net and I did not find an answer, so: I'm downgrading from Vista to Win XP on Satellte L40 (PSL48E), I created new WinXP SP2 with nLite with the AHCI drivers, looked ok win xp setup recognized the HDD so i deleted the

  • I upgraded my iPod Touch to iOS 7 and now I'm having issues?

    I have the latest generation iPod touch and I upgraded to iOS 7. It installed fine but since installing a bunch of my music disappeared and when I select a song to play it will skip the song I selected, move on to a new song, and delete that song off

  • Why can't I get a refund for an in app purchase my brother made without my knowledge

    Hi I asked apple for a refund because my brother bought several items last week I wanted to keep some so I only refunded 1 app but when I tried refunding the in app purchase It says I wasn't eligible, is there something I can do.

  • IFS & Workflow Example

    Is anyone using iFS Agent's to call the Oracle Workflow API? We would like to write an iFS agent to initiate a notification workflow (through the Oracle API). Say when the status attribute of a custom document changes. Is this the best way to go or i

  • Multi-threaded clients in 6.5

    Can a Tuxedo client asynchronously tpcall() services from independent threads?