Input hierarchy variable is not working

Hi,
i have created a BI quary which have a manual input hierarchy variable.Now i have created a Universe on it,and then Qaaws.
In Qaaws this varibale working fine,its gives proper result aCcording to selection of node.Then i have used this in Xcelsius,i have created a connection and then as input value i provided ROOT node key thorugh mapping this to one cell, and mapped the output cell.
Now if when i preview it,its showing no data,and if remove the input node value(balnck cell) then its showing data.I find out that its not taking the value.
What could be wrong here?How to pass hhierarchy node in xcelsius?
Thanks,
Piyush

Hi,
I had the exact same problem. Please have a look at this thread:
xPost: QaaWS, BW, Xcelsius and aggregation
Here is what you need to do (assuming you are on XI 3.1 SP2)
1) Refresh you universe with the option Generate technical names. This will give you an additional detail for each dimension in your universe called ...techname. So if you now check e.g. L01, L02 in your hierarchy they will have this attribute.
2) Create a new web service that includes key and the techname detail
3) Insert this into your visualization and use it to fill e.g. a combo box (key) and return the key + techname when selected
4) You can then use the techname to filter your second web service in the input values
Hth.,
Jacob Lund

Similar Messages

Input Parameter Mapping is not working in Sap HANA

Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more calculation view on top existing calculation view(B) and mapped with corresponding input parameters. Input parameter mapping is working fine in between A(analytical view) and --------> B (first Calc view) but input parameter mapping is not working properly in between B(first Calc View)-----------C(second Calc View). it is giving all data whatever is coming from Calc View B. Kindly help us to resolve this.

Hi,
Write c in small for Command,
theButton.mappingOfOnAction().addParameter("command","Save");
Regards,
Murtuza

Variable Text not working as dynamic header in Crystal report

Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
Luqman

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW

Dear Experts,
We have connected our 9i db with Sybase db using Hs connectivity.
and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
select Into (variable) is not working.
Please help to resolve the select into statment which is in BOLD in the below routine
PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
Thanks & Regards
Eidy
PROCEDURE SRBL_INSERT IS
CURSOR SRBL IS
     SELECT impno,impcod,impnam
     from oracle_table1 a, oracle_table2 b
     WHERE a.impcod=b.empcod
     v_srpcod varchar2(5);
BEGIN
FOR rec in SRBL loop
     begin
select "im_code" into v_impcod
     from SYBASE_TABLE_VIEW
     where "im_code"=rec.impcod;
exception when no_data_found then
     v_srpcod:=null;
end;
END LOOP;
END;
Edited by: Eidy on Aug 16, 2010 11:28 AM

hellow
try this.
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
v_srpcod := v_impcod ;
........

input type="file" multiple / not working in IE 10.

< input type="file" multiple /> not working in IE 10.
I am trying to use the HTML 5 multi-file upload capability in a MVC 4 app.
The control allows me to select multiple files when running under localhost but does not work when trying it from the web server.
Is there some web server configuration I need to do? Web server is running IIS 7.

Please post ASP.NET questions in the ASP.NET forums (http://forums.asp.net ).

Variable offset not working

Hello Experts -
I have a structure and a variable with single-value entry. The variable is on 0CALMONTH.
If user input 06/2007, I wanted to see information for 06/2007, 05/2007, 04/2007. I'm using a variable offset. But my report output is always for 06/2007. I have data for 05/2007 and 04/2007 also.
In the column header, it shows 04/2007, 05/2007 and 06/2007 but there's not data.
Can someone please help me with this? What am I doing wrong?

If you can see the offset result in header then it will surely work for data also.
If u have a key figure amount.
Then you need to restrict this figure for user inputed months variable - offset. i.e different restricted figures for different months.
I hope this is clear to you, if not then do let me know.
Thanks
Dipika

Repost Function using Variable is not working

Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
Teri

Ravi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri

Input Help (F4) does not work for Planning Functions in Web

Hi Gurus,
I am working in BI-Integrated Planning.
When I execute a planning function from web layout (through Web Application Designer), the "Input Help" does not work. When I give F4 it takes me to the initial planning layout screen from the planning function variable screen without any action being performed.
But the "Input Help" works fine when I have to select for the variable from the initial selection to open the planning layout.
Can anyone suggest me any fix for this...
Thanks!!!

Hi All,
Can somebody help me here what went wrong with indesign cc extension so that copy/paste does not work in input type element text
Regards,
Alam

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Variable Substitution not working when using ABAP mapping

Hi all,
I am doing an IDoc to File scenario.
Due to some complex mapping requirements, i had to use ABAP mapping for IDoc to File ( IDoc : SHPMNT05)
There is also one more requirement where in i need to generate the receiver filename dynamically
i.e the filename is of the form :
GW-XYZ-DD/MM/YYYY.csv
Where
XYZ is the Shipment number (E1EDT20- TKNUM)
DD/MM/YYYY is the IDOC creation date in ECC (EDIDC-CREDAT)
so i used the variable substitution option in receiver file adapter.
But its not working.
Is there any limitation for using the variable Substitution, doesnt variable substitution work in case of ABAP mapping?
Regards,
Loveena.

Hi,
u written ABAP mapping program to get the file name in the required format ,
is it rt?
when u test it at message mapping(including ABAP map program)
u get the the required format of file name in the one of target filed.
if that was fine, please check the variable substituiton parameters at receiver file adapter.
i mean, are u maintain variable name and refernece.
u have to specify the payload information.
warm regards
mahesh.

Variable is not working

HI Experts,
can any one suggest me on this issue . When i enter 0Material variable range selction the data is not retriving .the data has there in 0material master data. if enter other range like date with out giving materila the data is displaying . i checked user defined variable and customized variable its not displaying . but the same variable it working in quality system and its problem in production system so any one suggest me on this issue.
Regards
Rk

Hi,
Thank you very much for your reply . User has been raised some other requirement . here 6 variables containg and out of 2 are mandtory. if the user enter the one of the optional slection screen and 2 mandatory variable also be optional. if the user is not entring the optional the 2 remains mandtory here same variable act like optional and mandatory. if it is possible In please let me know.
Regards
Rk

Flex Time with variable tempo not working correctly.

Hey,
Has anyone else noticed that Flex Time doesn't work as intended if you have variable tempo?
To clarify, I recorded a band playing their song and then figured out their various natural tempo changes and adjusted the Global Tempo Track accordingly.
Then, the drummer recorded his part to a click on that track, obviously keeping with the natural tempo changes that the band played to.
Quantization of MIDI works just fine, as in, it matches the increases and decreases in tempo.
However, attempting to quantize an audio track using Flex Time does not work properly.
I was just wondering if there is something that I'm doing wrong or if this is a known bug.
Thanks,
William

Thank you for your answers!
But there are several Problems using a dummy field in an IDOC structure. We have got a naming convension so that we can't create an IDOC-like structure named ORDRSP.ORDERS05.
But perhaps I am thinking to complex and there is an easier way to add a dummy field to an IDOC structure.
Could you perhaps also suggest a solution for that dummy field problem?
Many thanks and kind regards,
Steven

Flash Variable is not working in Ipad

Hi Experts,
I'm facing with an issue, could you please suggest me your valuable suggestions.
I have created Two dashboard (Example names A1 and B1), I need to open the dashboard B1 without asking credentials, when I select an Image in A1.
To work in such a way, I have created a flash variable and pointed the range to cell J1.
I have placed a URL button on top of image in Dashboard A1. I have copied following URL in a cell, and this URL I have pointed to URL Button.
URL= (="../../../Xcelsius/opendoc/documentDownload?iDocID=M1TVABCADjs2AHoAlg123AAgoBpgwAAAA&sIDType=CUID&CELogonToken="&J1)
Opening B1 dashboard from A1 is working fine in desktop and in Android tab, but it is not working in Ipad. Not working in Ipad in the sense a new browser window is opening with empty page.
I have tested in another way like, passing opendocID and Flash variable to the URL button, It is working fine in Ipad but asking for the credentials.
Experts could you please suggest me some solution.
Ipad is Ipad2 and BO Version is 4.1 SP4.
Thanks & Regards
Karthik M

Hello,
You hyave to use the special flash variable "CELogonToken"
Would request you to check http://scn.sap.com/docs/DOC-36362 this is a SCN document
with title "Step by step way to create parent child dashboard in BI 4.0/4.1 using flash variable".
SWF loader is not supported for mobile.
Best regards,
Mohamed AISSA.

Shared variable does not work in executable

In editor mode, the shared variables update fine. When I build the executable, the shared variables no longer work.
See attachment.
Attachments:
TestCitadel.vi ‏30 KB

I found this note in the LV2010 help, I wonder if this could be related to your problem...
Note You can use scaling only for network-published
shared variables, I/O variables, or I/O aliases. When the shared
variable you want to scale is a network-published shared variable, it
must have a data source. Configure a network-published shared variable
to have a data source by placing a checkmark in the Enable Aliasing checkbox on the Variable page of the Shared Variable Properties dialog box.

Shared variable does not work between two computers

I am using LabVIEW 8 on Windows XP computers.
1. On one computer I have created two projects, writeProject and readProject.
2. In the writeProject I have a shared variable, writeData, which is "network-published" double. In this project I have a writeData.vi which in while loop assigns a random value to the writeData variable.
3. In the readProject I have a shared variable, readData, which is "network-published" double and is bound to the writeData variable. This is on the same computer as the writeProject.
4. I run both the writeData.vi and the readData.vi and all works fine.
5. Now, I create a readProject on a diferent computer. Perform all the steps as described above and also in tools/shared variable/register computer, I have entered the IP address of the target computer on which the writeData shared variable exists.
6. Binding the readData variable fails in the following way. When I browse for the source, in the "Select Source Item" dialog, I see <IP> <Populating Node...>, where <IP> is the IP address of the source computer (on which exists the writeData shared variable). A very long time later it is still "Populating Node...". Neddless to say, this readData.vi does not work!
What am I doing wrong? Or, perhapse what else do I need to do to make it work?

Hi,
I would suggest checking out the two KnowledgeBases I have linked below for common issues with Network Shared Variables. Let me know the results. Thanks!
Troubleshooting Network-Published Shared Variables
Why Are My Network Shared Variables Taking Very Long to Initialize?
Stephanie

Input hierarchy variable is not working

Similar Messages

Maybe you are looking for