Input iphone movie to Final cut express

Can I use Compressor to convert an iphone movie to a format that Final Cut Express 4 will accept?

Yes. Compressor can transcode the H.264 to Apple Intermediate Codec (AIC). It can also convert the 44.1 kHz audio to 48. (Note: you could also do this in MPEG Streamclip.)
Russ

Similar Messages

  • Iphone footage into Final Cut Express

    I left a question earlier in this forum and would like to update (hopefully that's proper process!). I'll repeat the question, in case:
    I'm trying to get footage from iPhone 4 to Final Cut Express. I'm using MPEG Streamclip 1.9.2. In the tutorial I found, they did an export to Quicktime, selecting the Apple Intermediate Codec as the compression, 29.97 as the Frame, and "1280 x 720 (unscaled)" as the frame size option (I'm also selecting frame blending and better downscaling, and turning off interlaced scaling; the rest are Streamclip defaults). My version of Streamclip doesn't have a 1280x720 (unscaled), so I've been forced to select 1280x720 (HDTV 720P). Not sure if this is my problem.
    On recent attempts, I've managed to get the clip into a QuickTime format (using the settings above) in a way that doesn't look stretched (can't tell whether it is or not). When I import the clip into FCE, it comes in without having to be rendered, and looks as if it's not stretched there either. But as soon as I drop the clip into the sequence and try to play it, I get the "Dropped Frames" warning. I'm already operating in RT Safe mode, and rarely/never have problems w/ dropped frames with clips that were captured from my Sony camera/tape. Is the AIC codec more demanding of faster drives? (I'm using a 200Gig external Apple drive at the moment). Or is it because I have been forced to export as a 1280x720 HDTV 720p as opposed to unscaled?
    In FCE I've set easy set up to:
    Apple Intermediate Codec, 29.97, and HDV AIC 720 p30; Is this a match with the Export QT version?
    And if so, would the clip be coming into my sequence without having to be rendered? Since I haven't had to upgrade my hardware for my other camera, I'd be reluctant to go out and buy more external disk power, in the event it doesn't do me any good.
    I know there are several posts on people trying to get iphone footage into FCE already, but they don't seem to apply and, after hours on the internet looking for a solution, I'm at my wits end. PLEASE HELP
    Thanks in advance!!

    The 4s records video as MPEG4/AVC (H.264)/1080p/30fps in a .mov filetype.   Final Cut Express is NOT designed to edit this kind of video.  You need to convert the 4s video clips to QuickTime/Apple Intermediate Codec/1080i before importing them into FCE.  You can use MPEG Streamclip to do the conversion.  In FCE you also need to select a matching Easy Setup (should be AVCHD Apple Intermediate Codec 1920x1080i60 for converted 4s clips) and create a new Sequence to edit your video.  This should eliminate the constant re-rendering problem.
    ps.  Final Cut Express was discontinued in 2011 even before OS X Lion was released. It is no longer supported by Apple and there is no guarantee it will run properly on Yosemite.  Just so you know.  Final Cut Pro X is the currently supported app.

  • Correct way of importing an iMovie 6 movie into Final Cut Express?

    Hi,
    Many thanks in advance for your attention.
    Any correct way to import an iMovie 6 HD movie into Final Cut Express for further editing?
    I tried.
    1. I Exported the iMovie, at Full Quality and it made a Quicktime version of that movie.
    2. I then Imported this Quicktime version into Final Cut Express.
    3. The audio was smooth, but at regular intervals, the video freezes for a second (and then moves on).
    4. The movie plays smoothly back in its original iMovie incarnation and in its Quicktime incarnation. Only in Final Cut Express is there this intermittent freezing. Stop and start.
    5. I have Final Cut Express 3.5.1 and iMovie 6 HD.
    Thank you,
    - Ross

    "Full Quality" QuickTime export from iMovie gives you a DV stream which will need rendering in FCE. Rather than "Full Quality," choose "Expert Settings," and then the following:
    Video
    DV-DVCPRO - NTSC (assuming you're in USA)
    Sound
    48kHz
    16-bit

  • Trouble importing .mov into Final Cut Express

    I have a number of video clips given to me by a client in Italy and provided as .mov files. I can view them in Quicktime with no problem. I want to edit them. I have Final Cut Express 4 and when I import the files, I can see the file listed, I can hear the audio play but I can't see the video. Is this a conversion problem of some sort? Do I need to convert it first into a different format — if so, what format and what conversion software do you recommend (I tried a couple of free ones to no avail).
    Thanks for any help you can provide!

    Hi everybody,
    I've solved the problem by installing Final Cut 6 (latest version): when drag and drop the clip, the settings instantly suit to the clip properties (making rendering un-necessary).
    The images are still stretched but, when I deselect "Show as Sq. Pixel" from the first of those 3 menus on the canvas display, images suddenly appear exactly as I wanted (even the images quality is exactly the same as the source).
    Now the problem is Compressor (still latest version):
    I've tried to convert with a lot of presets, but images are still vertically stretched and images are not as clear and sharp as the source.
    Which is the right preset??
    Thank you!

  • Is iDVD compatible with quicktime movies from Final Cut Express 4?

    I am trying to find out if iDBD can be used with Final Cut Express 4 output or is it just for imovie?  If it can be used with FCE4 what is the extension.  Thank you.

    Hi
    Yes - IF YOU DO IT RIGHT.
    FCE/P to iDVD
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref. file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
    Yours Bengt W

  • Recording Video with iPhone 4S and Final Cut Express

    Hello,
    I make drum covers using Pro Tools for audio recording, and FCE for video editing.  I have 2 sony handy cams for different angles/views, and recently purchased an iPhone 4S.  I typically import the videos into FCE and cut out the camera's audio and import Pro Tools audio. I figured I could use another angle with the iPhone.  When I imported all 3 clips (sony, sony, iphone) into FCE, the iphone clip plays in FCE, but has an orange line in the timeline section, and plays really choppy.  I tried rendering the video for real-time editing, and that didn't seem to work.  The biggest issue, is that the video from the iPhone will not sync correctly with the music, but my other cameras do just fine. 
    Any help would be greatly appreciated!  
    -Justin

    In MPEG Streamclip, you must make the proper audio settings as well as video settings.  Normally, FCE Sequences require uncompressed AIFF (PCM) audio at 48khz, 16 bit.  Which audio settings did you use?
    This tutorial on using MPEG Streamclip may help: http://www.secondchairvideo.com/?p=739  Although it is written for converting DVD footage, the basics are the same.
    -DH

  • Exporting movie in final cut express to quick time movie

    Does anyone know what ERROR : Not enough disk space means when trying to
    export my movie to quick time movie?

    It means exactly what it says.
    Look in Finder, at the bottom of the window to see how much free space the drive you are trying to save to, has.
    What Sequence setting are you using and how long is your project?

  • Exporting footage from I Movie to Final cut express 4

    I am sure its possible but how?

    Depends on the footage format. You can use the Share function in iMovie.

  • Final Cut Express wont make make a self contained movie

    Until recently I have always been able to export my movies from final cut express HD without any problems. They save as final cut express movie files. Now when I come to export a movie, I click on " make self contained movie" and what I get is a quicktime movie that is split into 3 parts, one named whatever I had told it to save as and the other 2 with the same name but -av1 or -av2 after it. If either of these is deleted the original wont play but they wont open on their own. There is sufficient hard drive space and they are all saved in the same folder. There appears to be a 2GB maximum file size as the first movie is 2 GB the second is 2 GB and the third is whatever is left over. Anything smaller than 4 GB just saves as a 2GB plus whatever is lreft over! They will play if original video clips are deleted so they are independent but wont play if one of the 3 is missing. Please help this is driving me scatty
    Powermac G4/466 (upgraded to dual 1.4GHz), Macbook pro   Mac OS X (10.4.6)  

    Is the drive you aresaving to formatted to Mac OS Extended?
    Sounds like it could be Mac Standard.
    Also check in Prefernces that the file size export limit is not set to 2 gig.
    Al

  • How do I export a Final Cut Express 4 movie using quick time conversion without stretching the image?

    I have created a movie in Final Cut Express 4 using videos and still photos of various aspect ratios and resolutions.  Some of the photos are verticals.  When I try to use File>Export>Using Quick Time Conversion, my images end up being stretched horizontally when the video is finally processed.  I have tried preserving the aspect ratio but the video still ends up stretched horizontally.  What should my settings be in Quick time conversion?  I just want to make a video for YouTube.
    Thanks.  -Bob

    If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
    HD:  1920x1080/60i (FX or FH mode)
    HD:  1440x1080/60i (HQ or LP mode)
    SD:  720x480/60i
    1080/60p (PS mode) seems to be the default mode in your camcorder.  FCE only supports progressive video in 720p50 or 720p60.   That's probably why you have had to import via iMovie.
    It would be better to upgrade to Final Cut Pro X, the version currently supported.  FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

  • Final Cut Express 4 and I Movie

    I am having trouble understanding how to work with videos on my new Mac. I do not understand how to import photos from my hard drive into I Movie or Final Cut Express. I also do not understand why I cannot download a slideshow DVD I created on my Windows Vista into Final Cut Express.

    MPEG Streamclip can convert a VIDEO_TS folder to other formats. Use "Open DVD" from its "File" menu and choose the VIDEO_TS folder.
    <http://www.squared5.com/>

  • Canon GL2 is not recognized by Final Cut Express

    I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
    Any Suggestions?

    Hi
    My general list on this.
    *NO CAMERA or A/D-box*
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable *very often the problem maker*.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Resurrect Final Cut Express HD 3.0?

    Pleae advise what path is required to move from Final Cut Express HD 3.0 to Final Cut Express 4. Recently purchased iMac G5 with i5 Intel processor. Transferred all the content from my PPC G5 using Migration Assistant. All went well. However, Final Cut Express HD 3.0 will not open. Would really like to continue using FCE for more complex projects.

    The problem with FCE3 and Lion is that although FCE 3 will run on it, its' installer is PPC and will not run. I managed to get it on my Lion partition by doing the following (these steps will only work if you have a workiing FCE on a machine running Snow Leopard; that is how it worked for me.) I do not know if it will also work with older OS versions, but you can try at your own risk:
    http://support.apple.com/kb/TA38198?viewlocale=en_US
    I followed this information here to copy all the files from the Snow Leopard partition into the very same spots on my Lion partition. Since it's on a separate machine in your  case, copy the files, make a note of what they are and where they came from and then copy them onto an external hard drive temporarily. Then hook up the drive to the new Mac and insert the files into the very same spots. Restart the Mac, keep your fingers crossed: FCE will launch......

  • Exporting movie from final cut express4 direct to apple tv

    How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

    Welcome to the  Discussion Forums.
    The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

  • IDVD problem - exporting from  Final Cut Express

    I'm have a problem with my iDVD that I am not sure how to fix. I created a movie in Final Cut Express...exported and burned a DVD in iDVD. I went back to that project in Final Cut and altered it...saving a new project. Then I try to open iDVD I get this pop up message that says it can't find Sequence 1-FIN-0000002f so the moive will not play properly. Seems that it is referencing the project that I burn previously. It gives me the option to search for the file or cancel. If I search I can't find it and if I cancel I get the spinning wheel...the program will not open. I'm new to working with Final Cut so I'm not sure but somehow I deleted a file that was embedded in the the first movie I created. It appears that when I open my video drive I have a Render File folder, in this folder are folders for all the projects I have created. I can locate the last project folder and see all the sequence files (all named like the one that was missing....Sequence1-FIN-0000002f) I just am not sure how I would have erased one of these rendered files. Is there a way for me to recreate a rendered file with this file name so the iDVD will recongize it or bypass this in iDVD so I can just open it and create something new? Any suggestion on how to fix this would be greatly appreciated.....

    Keep in mind you are working with QT Reference files. These files reference the movie files within your video editing app. If you opt to burn a DVD and then go back and alter these same ref. files then you confuse iDvd which normally requires that you delete the encoded assets and start again so iDvd can again recognize what you want in terms of a finished iDvd. Hope this helps but if not just come on back.

Maybe you are looking for