Input just changes on it own

The input on the tv just changes on it`s own.At 1st was just once in awhile,now it is about every 2-5 mins. We have reset tv and and directtv source and the direct tv remote.Still having problem.How can I fix this?

It sounds like it may require servicing. I don't know what would cause that.
- Peter

Similar Messages

My wife and I want to swap her 4s for my 4 while a take a short trip out of the country. We use the same email address for itunes but different for email. Can we just change our phone numbers and email addresses so we get our own messages?

My wife and I want to swap her iphone 4s for my iphone 4 while I take a short trip out of the country. We use the same itunes account but have different email accounts. Can we just change our phone numbers with our carrier and change email addresses on our phones so we get correct messages, with out disturbing our other apps?

The email is simple. Just delete her email acoount on her iPhone and configure your account into the phone and then do the same for her on your phone.
The harder issue is that to switch the cellular phone service you will need to switch the SIM cards and the two phones do not use the same size SIM card.

Push notification settings changing on their own

I have an iPhone 4 and so does my wife. We understand how to set push notifications on our phones for different apps.
On my wife's iPhone, the push notifications for whatsapp and viber keep switching on their own from Alerts to Banners.
We do not understand why this keeps on happening, time after time. Basically every time the Phone is powered off and back on again.
Any input greatly appreciated, thanks

I've been on Pay As You Go from the start so it's not a contract SIM but there was a little card in with SIM when I bought the phone that said to change the setting to idata as O2 had just changed it, so I did that, but since the data outages that O2 had a couple of months ago that setting didn't work so looking for a solution I found out about changing it to payandgo and that worked but keeps changing back.
Maybe it thinks that idata is what it should be, but I don't even have to sync the phone to iTunes for the setting to change back to idata, its like O2 are sending a signal to the phone to change it back or something or maybe the idata is set on the SIM and the Phone checks that from time to time and overwrites the way it is in the Cellular Data Network settings screen, very odd and infuriating either way.
There has to be a way to fix this, anyone have a clue?

Main "Play Control" volume changes on its own when I open and close WinDVD or Winfast

Main "Play Control" volume changes on its own when I open these programs, and when they're closed the main volume resets to where it was before the program was opened.
Surely I'm not the only one who has had this problem before.. I've had the problem with both Creative soundcards I've owned, before and after different drivers installations.
It can be very irritating and can potentially lead to damaged speakers if I'm not paying close attention to what my various volume knobs are set at before and after I open these programs.
I appreciate any and all input, thankyou.

I had to edit to reflect its Mavericks 10.9

Data settings changing on their own and losing connection

Can someone tell me why when on PAYG with the payandgo.o2.co.uk setting does it change back on it's own to idata.o2.co.uk and then my internet connection is lost and when I try and change it back to payandgo.o2.co.uk half to time it doesn't stick, so I have to do it again and again till it does, and then it'll last a day or two and change back again losing my connection again, this is driving me nuts.

I've been on Pay As You Go from the start so it's not a contract SIM but there was a little card in with SIM when I bought the phone that said to change the setting to idata as O2 had just changed it, so I did that, but since the data outages that O2 had a couple of months ago that setting didn't work so looking for a solution I found out about changing it to payandgo and that worked but keeps changing back.
Maybe it thinks that idata is what it should be, but I don't even have to sync the phone to iTunes for the setting to change back to idata, its like O2 are sending a signal to the phone to change it back or something or maybe the idata is set on the SIM and the Phone checks that from time to time and overwrites the way it is in the Cellular Data Network settings screen, very odd and infuriating either way.
There has to be a way to fix this, anyone have a clue?

I'm having an error in Photoshop CS6 where the numbers in boxes (like image size width) are changing on their own. Can someone please help me figure this out?

This was happening all the time on my old 2006 iMac, and I thought that when I upgraded to a new computer it would go away. No such luck.
Sometimes the program works just fine, and other times I have this error. I haven't been able to pinpoint what is causing it.
Basically what happens is, I will try to type a number in the box to edit the size of the image (or sharpness, etc. something that requires you to enter a number), and as soon as my mouse hovers over the box, the numbers start changing on their own. As soon as I move the mouse away, the problem stops, but of course this means that I am unable to type in the number that I want.
I've tried unplugging my mouse and keyboard - that doesn't change anything.
Has anyone run into this issue before?
Btw, I use a 2013 iMac, OS version 10.9.5
(I have a video clip of this problem, but I don't know how to share it here)

Your task is hardly a case for Photoshop: replacing text accurately in a scanned, not even
straightened image.
My recommendations:
a) put a crossreference list on each page
   or
b) straighten the scans and improve the contrast, both by Photoshop.
   Then apply a program which converts images of text into machine coded text
   by OCR - Optical Character Recognition , for instance Abbyy Finereader
   http://finereader.abbyy.de/professional/?adw=google_eu&gclid=CMirrcCMx7MCFZHRzAodlisAJg
   (I'm not related to the manufacturer of this software, I'm just a user).
   In coded text it's easy to replace isolated character groups as required.
Best regards and good luck --Gernot Hoffmann

R12 - How Do I Keep 'Swan' LAF, just change colors.

I've been trying to edit/make my own .xss files, but its not going as well as I had originally hoped. All the layouts, spacings, everything gets pretty much reset. I'm hoping to just keep the Swan (the stock blue/light blue) look and feel and just change the colors of it. Is there anyone that can direct me on how to do that please?
Also, a few requirements that I need that I haven't seen yet.
I need to be able to do a vertical gradient background color, how do I do this?
Is there a way to add a global footer image?
Can I change the footer blue color to a horizontal gradient background color?
Thank you very much in advance

I just saw a previous thread 3 years old saying that you cant 'retain' the SWAN laf. But you can copy/paste the .xss from the swan file over to your own .xss. I'm wondering exactly which swan.xss file that is as I see several. I'm thinking its the swan-desktop.xss?
And then it said that you have to recreate the icons for the new xss by just copying over the swan images. Where do I copy the images to and how do I tell the .xss file to use those images? etc

So can Adobe just change the amount they charge you at any time?

I was paying $29.99 per month, and it just changed to $49.99. Know how I found out about the price change? An automatic email from my credit card company that lets me know whenever my card is charged from an online source. Adobe didn't let me know they were going to charge me more. This is not the first time this has happened to me either. So what, is the price just going to keep going up? Next January is my subscription going to cost $59.99? And will Adobe ever let me know about a price increase and maybe give me the option to NOT use their service anymore and NOT get fined?
Also, customer support never got back to me when I inquired about my subscription. In my account info it said my subscription cost $29.99, but I got charged $49.99. Does Adobe not have any kind of ticketing system? I asked for my ticket number and the support guy gave me a hard time.

Today I received the notification that my next monthly installment will increase by 50% from $19.99 to $29.99 per month. I certainly do not remember my first year being a "honeymoon period" or "special rate". In fact I had long dialogue with Adobe over that expectation in September last year when I applied for the Student package before I ditched my purchased and fully owned software packages. For months now I have seen the fears of users realized with this tactic of increasing your subscriptions in large amounts which is totally in line with all our Cable and entertainment empires. I am very very disappointed that Adobe have adopted this attitude to the customer base, in fact I thought their innovation in software was being used in great effect with this subscription model. It appears not and again a major US innovation has been infected by Corporate greed without regard for its customers.
I did try to reach someone via their on line chat this morning, only to be told their systems are down for maintenance and please try again on Monday - Yet another sign of a corporation ignoring its customers I afraid.

My External Seagate Hard drive just changed to read only

my External Seagate Hard drive just changed to read only on its own?
I went to get info and scrolled down to the Sharing and Permissions
But there is nothing there but a greyed out : You can only read
There are No boxes to check or uncheck, No options to change to read and write, No name of owner or ignore ownership box. NOTHING ELSE IS THERE
HELP!
I have recently upgraded to Mountain Lion and am having other problems as well

Click on the external HDD icon COMMAND+I. You should see a display such as this:
You should be logged on as the administrator. Click on the lock icon. It should open and allow you to make the required changes.
Ciao.

If I change a file name, how can I get DW to just change the name on server?

I've got a reasonable grasp of site management but I just changed a bunch of files to replace an uppecase letter with a lower case e.g. MyFile.jpg to myfile.jpg and DW doesn't manage that on the server.
I ended up canging my file names, syncing the folder, deleting the duplicates directly on the server and then uploadin the HTML page the images link to. Seemed like a long way of doing things in relation to the way DW manages everything else?
Regards
Maritn

Hello Beth
Thanks for that but it was rather what I wondered if I could avoid.
The problem arises because of trying to manage gallery images. I needed to change the name of a .jpg file and wondered if I could update the server without updating everything else. All my pages work OK and I needed to change several image names. I went through the images and changed them locally, and DW updates everything fine. So I synchronise the pages and would have just liked to have updated the image filenames without having to wait for the upload of just the image files which were the same.
Even as I'm typing that out I realise it would be a small miracle to expect DW to compensate for my own ceaseless laziness...
Martin

ITunes on MBP keeps altering song information without my inputing any changes

It seems several people are having this problem, as far as I can tell from other blogs and discussion boards, but I have yet to find an answer that corrects the issue permanently. iTunes (v. 11.3 (54)) on my MBP mid-2012 13" (running OS X Mavericks, v. 10.9.4) model keeps changing the genre of my songs. I have, in the past, organized songs according to genres as I liked and have not had problems until about 3 months ago. I have tried several fixes but it I cannot find one that keeps iTunes from making the changes on its own without my input in the song information. All I have to do to change the song back is simply "play" it. When I do iTunes reverts the song's information back to where it should be and places it within that genre. Then the next time I reopen iTunes it has changed all the songs again. If anyone has a fix please post here or link me to one that has worked for you. This issue has also started to change some album and artist information. One fix I found that worked only temporarily (until I turned my MacBook back on) was going to Preferences >> Advanced and unchecking the "Keep iTunes Media folder organized." Worked for a day and then reverted back to the same problem.

Yes, others are seeing this. Something in purchased media (I am pretty sure this has only happened with purchased media) is periodically checking back with the iTunes Store and resetting the tags in the iTunes library file but not in the actual media files (metadata are stored in both). I haven't seen a truly systematic diagnosis of the issue (I use an old iTunes and have no iTunes account so I can't test anything myself). There are temporary workarounds but tags will still revert after a time.
2014 discussion about edited tags for Store purchases reverting to originals - https://discussions.apple.com/message/26077896#26077896 - edited tags are still present in the media file but revert to the originals in the iTunes library file. Workaround is to refresh tags so media file tags are re-read and used in library file.
https://discussions.apple.com/message/26193185#26193185
https://discussions.apple.com/message/26335620#26335620 - user ended up rebuilding iTunes library from scratch
Send feedback to Apple about this so they know it is an issue they need to investigate:
http://www.apple.com/feedback/itunesapp.html
Don't expect an immediate solution but maybe the next time they update the software it may be resolved.

Hi. Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV? Whenever I click either/or it just changes the speakers rather play through both? Cheers

Hi.
Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?
Whenever I click either/or it just changes the speakers rather play through both?
Cheers

to transfer audio to an airport express the device needs to support airplay unless your samsung tv's manual clearly state it does support it then it don't
appletv can't get audio input into it the optical connector is output only same with the hdmi port

Input sources change after restart

Hello!
I changed my hard disk, and after reinstalling the system, I noticed that after restart the input source changes to US layout, when my and computer is set to Spanish ISO. I cloned my disk using SuperDuper! and everything went fine.
What can I do so the computer starts already in Spanish ISO, not US keyboard layout?
It is an iMac Late 2009, with Fusion Drive and 12 GB memory running Mavericks 10.9.5

I don't know how to fix it, but it's not just you. I've been seeing it for a couple weeks on a fresh install of Yosemite from a wiped SSD.
A little extra info, from my situation: when I installed Yosemite I incorrectly selected "US Extended" as the input source to use. Once installed I corrected it to the regular US keyboard, and added my usual Japanese input source. When I restart, both of those disappear and it reverts to US Extended.
So it's apparently storing the input source used during OS installation somewhere, and hauling that out when I restart. Why and where would it do that, I wonder?
Remember to give Apple feedback so they they can add you to their count of people that it's affecting!
https://www.apple.com/feedback/macosx.html

I just changed my Apple ID and I verified it but when I try to login it says my Apple ID is not verified

I just changed my Apple ID and I verified it but when I try to login it says my Apple ID is not verified. Now I can't access my iTunes account at all. How can I fix this?

You need to click the link in the e-mail you received to verify.
Then you need to link the valid credit card info to your Apple ID if you want to download anything from Apple Store (iTunes, Apps and iBooks).
https://appleid.apple.com

I just changed my Internet provider and my Apple TV is not working. It is showing a blank screen - tv is on the correct setting...cannot even see access any Apple TV screens to update my internet?? Help?

I have just changed mt internet provider and cannot get my apple tv to work now!

Welcome to the Apple Community.
Changing your ISP may cause some issues but not so far as I am aware a problem with it connecting to your TV.
Have you changed anything else, what troubleshooting steps have you taken so far.

Input just changes on it own

Similar Messages

Maybe you are looking for