Input of Multiple values in BEX Browser

Dear All,
Can I input multiple values i.e Can I copy values from a excel or a data base which are at random and paste in BEX Browser as a input variable. is there any way to do this operation.
Note:- Values need not be in series as stored in table.

Hi Abhijit,
I hope u are asking about input multiple values in data selection of the Query (Infact at selection screen, where u input the value for the query).
Well u can do this if u are using BW3.5 or Above. What u need to do is copy all those selection values from Excell sheet then at selection screen u have to there is a button of multiple copies which will suck values even more than 12 in numbers.
This functionality is perticularly benefial when u want to check the status BW for randon numbers of document numbers.
Hope this works for u.
Kindly assign the points if u feel this solution workable for u.
Regards.
Sunil Tayade Alias Sun Raj .

Similar Messages

How to search for multiple values with Bex Prompts

Hi,
I would like to know if it is possible to search for multiple values at the same time with Bex Prompts instead of searching one value at a time (please see the screen shot below). I searched the forum couldn't find any relevant answers. please let me know how to achieve?
Thanks,
Charvi.

Hi Charvi,
You can use wild card search to ensure you get multiple similar values listed as search output.use * for multiple characters and ? for single character.
For Example, Ravi * would result you all employees with first name as Ravi
You can use various search formats such as * Ravi * and * Ravi and Ra?? etc.
Thanks
Mallik

How to enter multiple values in BEX Analyzer 7.0

We are on 7.0. I created a query in Query Designer with a variable type of Select Option. When I execute the query in BEX Analyzer, how do I enter multiple selections?
Thanks.
Ryan

Hi Ryan,
You need to click on the button on the right of the variable (with a white square). In the box that pops up, choose your values. On the same screen, click the More>> button to see your selection and change the order if required.
Hope this helps...

OBIEE 11g Unable to browse multiple value hierarchy for analysis.

Hi All,
We are using OBIEE 11g Value Hierarchy feature to display GL Segment Hierarchies.
-     We have set the hierarchies to be Ragged and Skipped Levels in the RPD Business Model.
-     We have dragged the hierarchies from Business Model to Presentation Layer.
-     When selecting the hierarchies during Analysis, the first hierarchy that is browsed appears correctly. The next hierarchy when browsed just hangs.
For example:
Step 1: Browse Hierarchy1 (Block). The values show correctly.
Step 2: Browse Hierarchy2 (Account). The hierarchy does not open with a blinking circle remaining forever.
Alternatively;
If we selected, Hierarchy 2(Account) first, the hierarchy shows correctly, but when selecting Hierarchy1 (Block) a blinking circle appears and remains for ever without opening the hierarchy.
The nqquery.log shows correct result. My suspicion is that the issue is on the front end presentation services/javascript side.
Is there any additional setup/configuration required to open multiple value hierarchies during analysis.
Thanks and Regards,
Sasi

I have a pretty good guess at the hanging problem, unforntunitly i have no solutions yet.
I having same type of issue, hangs when building filters on for 2nd or 3rd dim table.. I can see obiee fireing off the query to populate the dropdown by running
select distinct on and joining to the fact table and dimensions that the users usually have selecte prior to start creatinng the filters.
It is sort of like doing a intra dimension filter.. Sounds good but if user does not cut way down on number of fact rows by the time 2nd filtered column is selected the generated query to populate the drop down can run and run.
OBI SE Once and discoverer dd not do this, at least not out of the box.

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Pass multiple values as single input parameter into pipelined function

Hi all,
My need is to pass multiple values as single input parameter into pipelined function.
For example - "2" and "3" are values of input parameter "t":
with data as (
select 1 as t from dual union all
select 2 as t from dual union all
select 3 as t from dual union all
select 4 as t from dual union all
select 5 as t from dual
select * from data where t in (2,3)Is it possible at all?

Not exactly sure, but usually 'multiple values'+'pipelined function' = some IN-LIST related approach?
See:
SQL> create table data as
2 select 1 as t from dual union all
3 select 2 as t from dual union all
4 select 3 as t from dual union all
5 select 4 as t from dual union all
6 select 5 as t from dual;
Table created.
SQL> --
SQL> CREATE OR REPLACE FUNCTION in_list (p_in_list IN VARCHAR2)
2 RETURN sys.odcivarchar2list PIPELINED
3 AS
4    l_text VARCHAR2(32767) := p_in_list || ',';
5    l_idx   NUMBER;
6 BEGIN
7    LOOP
8      l_idx := INSTR(l_text, ',');
9      EXIT WHEN NVL(l_idx, 0) = 0;
10      PIPE ROW (TRIM(SUBSTR(l_text, 1, l_idx - 1)));
11      l_text := SUBSTR(l_text, l_idx + 1);
12    END LOOP;
13
14    RETURN;
15 END;
16 /
Function created.
SQL> --
SQL> select *
2 from   data
3 where t in ( select *
4                from   table(in_list('1,2'))
5              );
         T
         1
         2
2 rows selected.http://www.oracle-base.com/articles/misc/dynamic-in-lists.php
or
http://tkyte.blogspot.nl/2006/06/varying-in-lists.html

Display multiple roles like in BEX browser onto the Portal

Hi All,
What is the best way to display BW roles onto the Portal.
Thanks,
Tom

Hi Patricio,
In the backend BW system, there are BW roles assigned for each user. When I go to the BEX browser, I see these BW roles that contains queries and workbooks. Now how do I display these BW roles onto the portal.
Thanks,
Tom

Copy using Variables with multiple single values in BEX

Hi,
I have a requirement wherein on executing the planning function, the system should take the FROM and TO values of 0FISCPER and copy the data accordingly.
Source variable is 'Single Value'.
Target variable is 'Multiple Single Value'.
I tried to give the Command Range as below:
$A$30:$C$31.
The button sequence is as below:
VAR_NAME_1      0         ZFISCPER
VAR_VALUE_1     0
VAR_NAME_2      1         ZFISCPER_M
VAR_VALUE_2     1
In the Analyzer, I entered the values as
In A30, VAR_NAME_1     0     =C20
In A31, VAR_NAME_2     1     =C21:C24
The values that I entered are as below:
C20 =   2007001 - Source value
C21 =   2007002 - Target values
C22 =   2007003
C23 =   2007004
C24 =   2007005.
The problem that Im facing is the system is unable to identify the multiple values that I enter for Target Fiscper and it displays as :#VALUE!
How to enter multiple single values and reference them accordingly?
Rgds,
Shyam

Hi,
I have tried to enter multiple single values as below:
VAR_VALUE_1     0     000 - Source
VAR_VALUE_1     1     003 - Target
VAR_VALUE_2     1     010
VAR_VALUE_3     1     080
VAR_VALUE_4     1     099
When I tried to execute the planning function, the system copies the data from version 000 to ALL versions irrespective of values entered above.ie:
1
2
3
10
80
99
100
110
Rgds
Shyam

How to restrict the particular value in BEx?

HI,
I have added particular dimension in query prompt. While refreshing i got more value in particular dimension. How to restrict the the value in bobj or bex?
Here i attached the screen shot. Please find the attachment.

Hi Mani,
Please make sure of your requirement. If you are using only one single query for multiple reports then i strongly recommend the below criteria or else it better to restrict the value in the BEx itself if you have no other reports on the same BEx query.
If you are trying to restrict a report to a default prompt value then use equal to in query filter prompt or you can also restrict them to list of values i.e multiple values.Please follow as per the screens below. I am mentioning two ways.
Method:1
Step 1: Click on Prompt Options(Blue Questionmark Symbol)
Step: 2 : Click on the Values after you check the prompt properties options as shown below.
Step 3: Search for values if they are keys by checking the "Search in keys" or else not required.
Method 2: Here is another Easy way is Just give the input in the value box as shown below.
Let me know if you need any further help.
Regards,
Naveen

How to get multiple values from the list

I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<%     // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
     // get multiple values from the list
     String[] selectedDistrict = request.getParameterValues("usrTDistrict");
     vselectedDistrict.clear();
     vdistrictID.clear();
     if((selectedDistrict != null) && (selectedDistrict.length != 0))
                       for(int i=0;i<selectedDistrict.length;i++)
               vselectedDistrict.addElement(selectedDistrict);
          vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
          for(int i=0;i<vdistrictID.size();i++)
               out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<%     for(int i = 0; i< vdistrict.size(); i++)
%>
     <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. Thanks

These are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

How to use Ajax Get Multiple Values in Tabular form?

Hi All-
I am trying to use AJAX to get multiple values in tabular form by using Denes Kubicek's example in the following link -
http://apex.oracle.com/pls/otn/f?p=31517:239:9172467565606::NO:::
Basically, I want to use the drop down list to populate rest of the values on the form.
I have created the example(Ajax Get Multiple Values, application 54522) on Oracle site -
http://apex.oracle.com/pls/apex/f?p=4550:1:0:::::
Workspace: iConnect
login: demo
password: demo
I was able to duplicate his example on page 1 (home page).
However, I want to use system generate tabular form to finish this example, and was not able to populate the data correctly.
Page 2 (method 2) is the one that I am having trouble to populate the column values. When I checked application item values in Session, and the values seems to be populated correctly.
This is what I have done on this page:
1. Create an Application Process On Demand - Set_Multi_Items_Tabular2:
DECLARE
v_subject my_book_store.subject%TYPE;
v_price my_book_store.price%TYPE;
v_author my_book_store.author%TYPE;
v_qty NUMBER;
CURSOR cur_c
IS
SELECT subject, price, author, 1 qty
FROM my_book_store
WHERE book_id = :temporary_application_item2;
BEGIN
FOR c IN cur_c
LOOP
v_subject := c.subject;
v_price := c.price;
v_author := c.author;
v_qty := c.qty;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="f04_' || :t_rownum || '">' || v_subject || '</item>');
HTP.prn ('<item id="f05_' || :t_rownum || '">' || v_price || '</item>');
HTP.prn ('<item id="f06_' || :t_rownum || '">' || v_author || '</item>');
HTP.prn ('<item id="f07_' || :t_rownum || '">' || v_qty || '</item>');
HTP.prn ('</body>');
END;
2. Create two application items - TEMPORARY_APPLICATION_ITEM2, T_ROWNUM2
3. Put the following in the Page Header:
<script language="JavaScript" type="text/javascript">
function f_set_multi_items_tabular2(pValue, pRow){
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Set_Multi_Items_Tabular2',0);
if(pValue){
get.add('TEMPORARY_APPLICATION_ITEM2',pValue)
get.add('T_ROWNUM2',pRow)
}else{
get.add('TEMPORARY_APPLICATION_ITEM2','null')
    gReturn = get.get('XML');
    if(gReturn){
        var l_Count = gReturn.getElementsByTagName("item").length;
        for(var i = 0;i<l_Count;i++){
            var l_Opt_Xml = gReturn.getElementsByTagName("item")[i];
            var l_ID = l_Opt_Xml.getAttribute('id');
            var l_El = html_GetElement(l_ID);
            if(l_Opt_Xml.firstChild){
                var l_Value = l_Opt_Xml.firstChild.nodeValue;
            }else{
                var l_Value = '';
            if(l_El){
                if(l_El.tagName == 'INPUT'){
                    l_El.value = l_Value;
                }else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
                    l_El.parentNode.innerHTML = l_Value;
                    l_El.parentNode.id = l_ID;
                }else{
                    l_El.innerHTML = l_Value;
    get = null;
</script>
Add the follwing to the end of the above JavaScript:
<script language="JavaScript" type="text/javascript">
function setLOV(filter, list2)
var s = filter.id;
var item = s.substring(3,8);
var field2 = list2 + item;
f_set_multi_items_tabular2(filter, field2);
4. Tabular form query:
select
"BOOK_ID",
"BOOK",
"SUBJECT",
"PRICE",
"AUTHOR",
"QTY",
"BOOK_ID" BOOK_ID_DISPLAY
from "#OWNER#"."MY_BOOK_STORE"
5. In Book_ID_DISPLAY column attribute:
Add the following code to element attributes: onchange="javascript:f_set_multi_items_tabular2(this.value,'#ROWNUM#');"
Changed to -> onchange="javascript:setLOV(this,'f03');"
Now, T_ROWNUM2 returns value as f03_0001. But, TEMPORARY_APPLICATION_ITEM2 returns as [object HTMLSelectElement]...
Please help me to see how I can populate the data with this tabular form format. Thanks a lot in advanced!!!
Ling
Updated code in Red..

Ling
Lets start with looking at what the javascript code is doing.
function f_set_multi_items_tabular(pValue, pRow){
/*This will initiate the url for the demand process to run*/
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
                          'APPLICATION_PROCESS=Set_Multi_Items_Tabular',0);
if(pValue){
    /*If there is an value than submit item name with value*/
    get.add('TEMPORARY_APPLICATION_ITEM',pValue)
    get.add('T_ROWNUM',pRow)
}else{
    /*Else set the item TEMPORARY_APPLICATION_ITEM to null*/
    get.add('TEMPORARY_APPLICATION_ITEM','null')
/*Submit the url and te returned document is of type XML*/
gReturn = get.get('XML');
if(gReturn){
    /*There is something returned*/
    var l_Count = gReturn.getElementsByTagName("item").length;
    /*For all elements of the tag item*/
    for(var i = 0;i<l_Count;i++){
      /*Get the item out of the XML*/
      var l_Opt_Xml = gReturn.getElementsByTagName("item")[i];
      /*Get the id of the item*/
      var l_ID = l_Opt_Xml.getAttribute('id');
      /*Get the element in the original page with the same id as
      **the item we have in the XML produced by the ondemand process
      var l_El = html_GetElement(l_ID);
      /*Now get the value of the item form the XML*/
      if(l_Opt_Xml.firstChild){
        var l_Value = l_Opt_Xml.firstChild.nodeValue;
      }else{
        /*There is no value*/
        var l_Value = '';
      if(l_El){
        /*There is an element with the same id as the item we are processing*/
        if(l_El.tagName == 'INPUT'){
          /*The element is an input item just set the value*/
          l_El.value = l_Value;
        }else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
          /*If it is a span elment and has the class grabber
          **Then set the innerHTML of the parent to the value
          **and the id of the parent to the id
          l_El.parentNode.innerHTML = l_Value;
          l_El.parentNode.id = l_ID;
        }else{
          /*Else set the value as innerHTML*/
          l_El.innerHTML = l_Value;
get = null;
Now where it went wrong in your initial post
The XML that was returned by your XML process would be something like
<body>
<desc>this xml genericly sets multiple items</desc>
<item id="f02_1">CSS Mastery</item>
<item id="f03_1">22</item>
<item id="f04_1">Andy Budd</item>
<item id="f05_1">1</item>
</body>
When you don't use apex_item to create your tabular form a item in the table will look like
<input id="f02_0001" type="text" value="CSS Mastery" maxlength="2000" size="16" name="f05" autocomplete="off">
Notice the id's f02_1 and f02_0001 don't match.
So to make it work the XML would have to look like
<body>
<desc>this xml genericly sets multiple items</desc>
<item id="f02_0001">CSS Mastery</item>
<item id="f03_0001">22</item>
<item id="f04_0001">Andy Budd</item>
<item id="f05_0001">1</item>
</body>
To do that simply use lpad in the ondemand process like
HTP.prn ('<item id="f02_' || lpad(:t_rownum,4,'0') || '">' || v_subject || '</item>');
HTP.prn ('<item id="f03_' || lpad(:t_rownum,4,'0') || '">' || v_price || '</item>');
HTP.prn ('<item id="f04_' || lpad(:t_rownum,4,'0') || '">' || v_author || '</item>');
HTP.prn ('<item id="f05_' || lpad(:t_rownum,4,'0') || '">' || v_qty || '</item>');
Keep in mind that the above is based on your original post and #ROWNUM# not being lpadded with zero's.
Nicolette

Passing Multiple Values from Multi Select

Hi,
My requirement is simple. I have created a simple Multi Select Option in parameter form and i want to send multiple selected values from the multi select option (in parameter form) to reports.
eg:
I want to send multiple countries code as input .........'US', 'CA', 'IND', 'UK'
Can i do it in Oracle 6i reports, Thanks in Advance.
Regards,
Asgar

Hi Thanks Again,
For such a nice response. I got the Lexical Where condition properly running but still getting problems in catching the multiple values to be passed from form. just i will give u an insight of wat i have done:
SQL:
SELECT ALL FROM EMPLOYEES &cond_1* -- Working FIne
in my Html Parameter Form i have an Multi Select component (the Problem is here) it is not passing more than i value from the form once i am accessing it from web or running it in paper report. In paper report layout it is not allowing me to select more than one value. but in HTML it is allowing to select multiple values but at the server end (After Parameter Form Trigger) it is giving a single value not multiple values.
In PL/SQL when i checking the length of country_id i m getting it as one.
Here is my SQL code
srw.message(10, LENGTH(:country_id_1));
:cond_1 := 'where country_id = '''|| :country_id_1 ||'''';
This is passing the condition properly to SQL but only with single value but i want to pass multiple values
I am struck in this+_
WHERE CONTRY_COLUMN IN ('USA','UAE') -- This variable you have to pass from you form...
Here as you said you gave multiple selection in your parameter form to generate report. So before generation report just prepare variable like this as it is bold above.
and pass parameter through your runtime form to the report as you pass the normal parameter...liket this i gave you example...
ADD_PARAMETER(PARAMETER_LIST_NAME,'P_CONT_PARAM',TEXT_PARAMETER,vString);
Sorry for troubling you for a small thing but please help me to solve this issue.
Thanks Again............
Asgar.

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

Input of Multiple values in BEX Browser

Similar Messages

Maybe you are looking for